IBM Security Identity Governance and Intelligence 5.2.6 could allow a remote attacker to obtain sensitive information, caused by the failure to set the secure flag for the session cookie in SSL mode. By intercepting its transmission within an HTTP session, an attacker could exploit this vulnerability to capture the cookie and obtain sensitive information. IBM X-Force ID: 175360.

IBM Spectrum Protect Server 8.1.0.000 through 8.1.10.000 could disclose sensitive information in nondefault settings due to occasionally not encrypting the second chunk of an object in an encrypted container pool. IBM X-Force ID: 184746.

IBM MQ Operator 2.0.0 LTS, 2.0.18 LTS, 3.0.0 CD, 3.0.1 CD, 2.4.0 through 2.4.7, 2.3.0 through 2.3.3, 2.2.0 through 2.2.2, and 2.3.0 through 2.3.3 stores or transmits user credentials in plain clear text which can be read by a local user using a trace command. IBM X-Force ID: 272638.

The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption.

It is possible for an API key to be logged in clear text in the audit log file after an invalid login attempt.

A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

IBM Security Verify Privilege On-Premises 11.5 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 221827.

IBM Security Verify Governance, Identity Manager 10.0.1 stores sensitive information including user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 225007.

IBM Integration Bus 9.0 and 10.0 transmits user credentials in plain in clear text which can be read by an attacker using man in the middle techniques. IBM X-Force ID: 134165.

A flaw was found in the Linux kernel's implementation of some networking protocols in IPsec, such as VXLAN and GENEVE tunnels over IPv6. When an encrypted tunnel is created between two hosts, the kernel isn't correctly routing tunneled data over the encrypted link; rather sending the data unencrypted. This would allow anyone in between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.36 iFix1, 2.3.3.6 iFix2, 2.3.3.7, 2.3.3.7 iFix1, 2.3.4.0, and 2.3.4.1 stores sensitive data in memory, that could be obtained by an unauthorized user.

IBM API Connect V10 is impacted by insecure communications during database replication. As the data replication happens over insecure communication channels, an attacker can view unencrypted data leading to a loss of confidentiality.

IBM Tivoli Endpoint Manager (IBM BigFix Platform 9.2 and 9.5) transmits sensitive or security-critical data in cleartext in a communication channel that can be sniffed by unauthorized actors. IBM X-Force ID: 123911.

Cast in Google Chrome prior to 57.0.2987.98 for Mac, Windows, and Linux and 57.0.2987.108 for Android sent cookies to sites discovered via SSDP, which allowed an attacker on the local network segment to initiate connections to arbitrary URLs and observe any plaintext cookies sent.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.8 and 6.1.0.0 through 6.1.2.3 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 265559.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 212782.

IBM Security Access Manager Appliance (IBM Security Verify Access Appliance 10.0.0.0 through 10.0.6.1 and IBM Security Verify Access Docker 10.0.6.1) could allow a local user to possibly elevate their privileges due to sensitive configuration information being exposed. IBM X-Force ID: 260584.

IBM Security Guardium 10.5, 10.6, 11.0, 11.1, 11.2, 11.3, and 11.4 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 215587.

evolution-data-server3 3.0.3 through 3.2.1 used insecure (non-SSL) connection when attempting to store sent email messages into the Sent folder, when the Sent folder was located on the remote server. An attacker could use this flaw to obtain login credentials of the victim.

Cleartext Transmission of Sensitive Information vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Server, Device Manager Agent, Host Data Collector components) allows Interception.This issue affects Hitachi Device Manager: before 8.8.5-02.

IBM Security Verify Information Queue 10.0.4 and 10.0.5 stores sensitive information in plain clear text which can be read by a local user. IBM X-Force ID: 256013.

IBM Security Verify Governance 10.0 does not encrypt sensitive or critical information before storage or transmission. IBM X-Force ID: 256020.

IBM TXSeries for Multiplatforms 8.1, 8.2, 9.1, CICS TX Standard, 11.1, CICS TX Advanced 10.1, and 11.1 could transmit sensitive information in query parameters that could be intercepted using man in the middle techniques. IBM X-Force ID: 257105.

IBM Security Verify Access 10.0.0.0 through 10.0.6.1 uses insecure protocols in some instances that could allow an attacker on the network to take control of the server. IBM X-Force Id: 254957.

IBM Tivoli Monitoring Portal V6 client could allow a local attacker to gain elevated privileges for IBM Tivoli Monitoring, caused by the default console connection not being encrypted. IBM X-Force ID: 123487.

IBM Watson CP4D Data Stores 4.6.0, 4.6.1, 4.6.2, and 4.6.3 does not encrypt sensitive or critical information before storage or transmission which could allow an attacker to obtain sensitive information. IBM X-Force ID: 248740.

A vulnerability was found in ISS BlackICE PC Protection. It has been declared as problematic. Affected by this vulnerability is the component Update Handler which allows cleartext transmission of data. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

IBM Standards Processing Engine (IBM Transformation Extender Advanced 9.0 and 10.0) does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 207090.

The mincore() implementation in mm/mincore.c in the Linux kernel through 4.19.13 allowed local attackers to observe page cache access patterns of other processes on the same system, potentially allowing sniffing of secret information. (Fixing this affects the output of the fincore program.) Limited remote exploitation may be possible, as demonstrated by latency differences in accessing public files from an Apache HTTP Server.

IBM Cognos Controller 10.3.0, 10.3.1, 10.4.0, and 10.4.1 does not set the secure attribute on authorization tokens or session cookies. This could allow an attacker to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 158876.

IBM Sterling File Gateway 2.2.0.0 through 6.0.1.0 displays sensitive information in HTTP requests which could be used in further attacks against the system. IBM X-Force ID: 160503.

IBM SmartCloud Analytics 1.3.1 through 1.3.5 does not set the secure attribute on authorization tokens or session cookies. This could allow an attacker to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 159185.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171826.

IBM Security Information Queue (ISIQ) 1.0.0, 1.0.1, and 1.0.2 is missing the HTTP Strict Transport Security header. Users can navigate by mistake to the unencrypted version of the web application or accept invalid certificates. This leads to sensitive data being sent unencrypted over the wire. IBM X-Force ID: 158661.

IBM Financial Transaction Manager 3.0 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 172880.

IBM Security Identity Manager Virtual Appliance 7.0.2 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 172014.

IBM Cloud Automation Manager 3.2.1.0 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 168644.

IBM Cognos Analytics 11.0 and 11.1 could allow a remote attacker to obtain sensitive information, caused by the failure to set the secure flag for a sensitive cookie in an HTTPS session. A remote attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 163780.

IBM API Connect 5.0.0.0 through 5.0.8.6 could allow an unauthorized user to obtain sensitive information about the system users using specially crafted HTTP requests. IBM X-Force ID: 162162.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 171822.

ibm_db is an asynchronous/synchronous interface for node.js to IBM DB2 and IBM Informix. ibm_db before 1.0.2 downloads binary resources over HTTP, which leaves it vulnerable to MITM attacks. It may be possible to cause remote code execution (RCE) by swapping out the requested binary with an attacker controlled binary if the attacker is on the network or positioned in between the user and the remote server.

IBM InfoSphere Information Server 11.7 DataStage Flow Designer  transmits sensitive information via URL or query parameters that could be exposed to an unauthorized actor using man in the middle techniques.

IBM i2 Analyst's Notebook Premium (IBM i2 Analyze 4.3.0, 4.3.1, and 4.3.2) does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 202769.

In affected versions of Octopus Server under certain circumstances it is possible for sensitive variables to be printed in the task log in clear-text.

IBM Security Guardium Key Lifecycle Manager 4.1, 4.1.1, 4.2.0, and 4.2.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

Cleartext transmission of sensitive information in acep-collector service. The following products are affected: Acronis Cyber Protect 16 (Linux, Windows) before build 38690.

IBM Concert 1.0 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic.

IBM QRadar SIEM 7.5 transmits sensitive or security-critical data in cleartext in a communication channel that could be obtained by an unauthorized actor using man in the middle techniques.

IBM Security Verify Access 10.0.6 could disclose sensitive snapshot information due to missing encryption. IBM X-Force ID: 281607.

IBM Security Guardium Key Lifecycle Manager 4.1, 4.1.1, 4.2.0, and 4.2.1 could allow a remote attacker to obtain sensitive information in cleartext in a communication channel that can be sniffed by unauthorized actors.