In NGINX Controller 3.0.0-3.4.0, recovery code required to change a user's password is transmitted and stored in the database in plain text, which allows an attacker who can intercept the database connection or have read access to the database, to request a password reset using the email address of another registered user then retrieve the recovery code.

IBM BigFix Compliance Analytics 1.9.79 (TEMA SUAv1 SCA SCM) stores user credentials in clear text which can be read by a local user. IBM X-Force ID: 123676.

IBM Cloud Pak System 2.3 could reveal credential information in the HTTP response to a local privileged user. IBM X-Force ID: 191288.

IBM BigFix Platform 9.5 - 9.5.9 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 123910.

A password storage vulnerability exists in the operating system functionality of Moxa EDR-810 V4.1 build 17030317. An attacker with shell access could extract passwords in clear text from the device.

An insufficiently protected credentials in Fortinet FortiNAC versions 9.4.0, 9.2.0 through 9.2.5, 9.1.0 through 9.1.7, 8.8.0 through 8.8.11, 8.7.0 through 8.7.6, 8.6.0 through 8.6.5, 8.5.0 through 8.5.4, 8.3.7 may allow a local attacker with database access to recover user passwords.

A vulnerability exists in BIG-IP Next CNF and SPK systems that may allow access to undisclosed sensitive files.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

A vulnerability has been identified in SIMATIC Drive Controller family (All versions < V2.9.2), SIMATIC ET 200SP Open Controller CPU 1515SP PC (incl. SIPLUS variants) (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V21.9), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.5.0), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V2.9.2), SIMATIC S7-1500 Software Controller (All versions < V21.9), SIMATIC S7-PLCSIM Advanced (All versions < V4.0), SINUMERIK MC (All versions < V6.21), SINUMERIK ONE (All versions < V6.21). Affected products protect the built-in global private key in a way that cannot be considered sufficient any longer. The key is used for the legacy protection of confidential configuration data and the legacy PG/PC and HMI communication. This could allow attackers to discover the private key of a CPU product family by an offline attack against a single CPU of the family. Attackers could then use this knowledge to extract confidential configuration data from projects that are protected by that key or to perform attacks against legacy PG/PC and HMI communication.

IBM Robotic Process Automation 21.0.1 and 21.0.2 could allow a user with psychical access to the system to obtain sensitive information due to insufficiently protected access tokens. IBM X-Force ID: 229198.

Synametrics SynaMan 4.0 build 1488 uses cleartext password storage for SMTP credentials.

A vulnerability has been identified in ModelSim Simulation (All versions), Questa Simulation (All versions). The RSA white-box implementation in affected applications insufficiently protects the built-in private keys that are required to decrypt electronic intellectual property (IP) data in accordance with the IEEE 1735 recommended practice. This could allow a sophisticated attacker to discover the keys, bypassing the protection intended by the IEEE 1735 recommended practice.

Samsung Drive Manager 2.0.104 on Samsung H3 devices allows attackers to bypass intended access controls on disk management. WideCharToMultiByte, WideCharStr, and MultiByteStr can contribute to password exposure.

An information disclosure vulnerability [CWE-200] in FortiAnalyzerVM and FortiManagerVM versions 7.0.0 and 6.4.6 and below may allow an authenticated attacker to read the FortiCloud credentials which were used to activate the trial license in cleartext.

Dell EMC Avamar Server version 19.4 contains a plain-text password storage vulnerability in AvInstaller. A local attacker could potentially exploit this vulnerability, leading to the disclosure of certain user credentials. The attacker may be able to use the exposed credentials to access the vulnerable application with privileges of the compromised account.

A flaw was found in Ansible Galaxy Collections. When collections are built manually, any files in the repository directory that are not explicitly excluded via the ``build_ignore`` list in "galaxy.yml" include files in the ``.tar.gz`` file. This contains sensitive info, such as the user's Ansible Galaxy API key and any secrets in ``ansible`` or ``ansible-playbook`` verbose output without the``no_log`` redaction. Currently, there is no way to deprecate a Collection Or delete a Collection Version. Once published, anyone who downloads or installs the collection can view the secrets.

A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.

Users with appropriate file access may be able to access unencrypted user credentials saved by MongoDB Extension for VS Code in a binary file. These credentials may be used by malicious attackers to perform unauthorized actions. This vulnerability affects all MongoDB Extension for VS Code including and prior to version 0.7.0

In Unisys Stealth (core) before 6.0.025.0, the Keycloak password is stored in a recoverable format that might be accessible by a local attacker, who could gain access to the Management Server and change the Stealth configuration.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

An inconsistent user interface issue was addressed with improved state management. This issue is fixed in iOS 15.2 and iPadOS 15.2. A person with physical access to an iOS device may be able to access stored passwords without authentication.

AdRem NetCrunch 10.6.0.4587 has Improper Credential Storage since the internal user database is readable by low-privileged users and passwords in the database are weakly encoded or encrypted.

A flaw was found in the GNOME Control Center in Red Hat Enterprise Linux 8 versions prior to 8.2, where it improperly uses Red Hat Customer Portal credentials when a user registers a system through the GNOME Settings User Interface. This flaw allows a local attacker to discover the Red Hat Customer Portal password. The highest threat from this vulnerability is to confidentiality.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, user account passwords set in clear text could leak to users without any password. This issue affects: Arista Metamako Operating System MOS-0.18 and post releases in the MOS-0.1x train All releases in the MOS-0.2x train MOS-0.31.1 and prior releases in the MOS-0.3x train

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, user enable passwords set in clear text could result in unprivileged users getting complete access to the systems. This issue affects: Arista Metamako Operating System MOS-0.13 and post releases in the MOS-0.1x train MOS-0.26.6 and prior releases in the MOS-0.2x train MOS-0.31.1 and prior releases in the MOS-0.3x train

IBM WebSphere Message Broker stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 123777.

An issue has been discovered in GitLab affecting all versions prior to 13.2.10, 13.3.7 and 13.4.2. Sessions keys are stored in plain-text in Redis which allows attacker with Redis access to authenticate as any user that has a session stored in Redis

Jenkins Build-Publisher plugin version 1.21 and earlier stores credentials to other Jenkins instances in the file hudson.plugins.build_publisher.BuildPublisher.xml in the Jenkins master home directory. These credentials were stored unencrypted, allowing anyone with local file system access to access them. Additionally, the credentials were also transmitted in plain text as part of the configuration form. This could result in exposure of the credentials through browser extensions, cross-site scripting vulnerabilities, and similar situations.

Insufficiently protected credentials in the Intel(R) EMA before version 1.3.3 may allow an authorized user to potentially enable information disclosure via local access.

Insufficiently protected credentialsin subsystem in some Intel(R) Client SSDs and some Intel(R) Data Center SSDs may allow an unauthenticated user to potentially enable information disclosure via physical access.

Insufficiently protected credentials in the Intel(R) QAT for Linux before version 1.7.l.4.10.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

The NGINX Controller 2.0.0 thru 2.9.0 and 3.x before 3.15.0 Administrator password may be exposed in the systemd.txt file that is included in the NGINX support package.

Ansible before 1.5.5 sets 0644 permissions for sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by reading a file that uses the "deb http://user:pass@server:port/" format.

HCL Launch stores user credentials in plain clear text which can be read by a local user.

eyeDisk implements the unlock feature by sending a cleartext password. The password can be discovered by sniffing USB traffic or by sending a 06 05 52 41 01 b0 00 00 00 00 00 00 SCSI command.

Jenkins GitLab Logo Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins Maven Release Plugin 0.14.0 and earlier stored credentials unencrypted on the Jenkins master where they could be viewed by users with access to the master file system.

Jenkins TraceTronic ECU-TEST Plugin 2.23.1 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

A flaw was found in ActiveMQ Artemis management API from version 2.7.0 up until 2.12.0, where a user inadvertently stores passwords in plaintext in the Artemis shadow file (etc/artemis-users.properties file) when executing the `resetUsers` operation. A local attacker can use this flaw to read the contents of the Artemis shadow file.

rubygem-hammer_cli_foreman: File /etc/hammer/cli.modules.d/foreman.yml world readable

Jenkins Bumblebee HP ALM Plugin 4.1.5 and earlier stores credentials unencrypted in its global configuration file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

Easy Hosting Control Panel (EHCP) v0.37.12.b allows attackers to obtain sensitive information by leveraging cleartext password storage.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

Jenkins Nomad Plugin 0.7.4 and earlier stores Docker passwords unencrypted in the global config.xml file on the Jenkins controller where they can be viewed by users with access to the Jenkins controller file system.

IBM Security Guardium 11.2 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 195770.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 196346.

CloudForms stores user passwords in recoverable format

A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device.

A vulnerability in the storage of proxy server credentials of Cisco Firepower Management Center (FMC) could allow an authenticated, local attacker to view credentials for a configured proxy server. The vulnerability is due to clear-text storage and weak permissions of related configuration files. An attacker could exploit this vulnerability by accessing the CLI of the affected software and viewing the contents of the affected files. A successful exploit could allow the attacker to view the credentials that are used to access the proxy server.