An issue was discovered in UTI Mutual fund Android application 5.4.18 and prior, allows attackers to brute force enumeration of usernames determined by the error message returned after invalid credentials are attempted.

An issue was discovered in Django v5.1.1, v5.0.9, and v4.2.16. The django.contrib.auth.forms.PasswordResetForm class, when used in a view implementing password reset flows, allows remote attackers to enumerate user e-mail addresses by sending password reset requests and observing the outcome (only when e-mail sending is consistently failing).

An issue was discovered in the SecurePoll extension for MediaWiki through 1.35.1. The non-admin vote list contains a full vote timestamp, which may provide unintended clues about how a voting process unfolded.

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

IBM TXSeries for Multiplatforms 10.1 could allow an attacker to determine valid usernames due to an observable timing discrepancy which could be used in further attacks against the system.

Loway - CWE-204: Observable Response Discrepancy

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

TYPO3 is an open source PHP based web content management system released under the GNU GPL. It has been discovered that observing response time during user authentication (backend and frontend) can be used to distinguish between existing and non-existing user accounts. Extension authors of 3rd party TYPO3 extensions providing a custom authentication service should check if the extension is affected by the described problem. Affected extensions must implement new `MimicServiceInterface::mimicAuthUser`, which simulates corresponding times regular processing would usually take. Update to TYPO3 version 7.6.58 ELTS, 8.7.48 ELTS, 9.5.37 ELTS, 10.4.32 or 11.5.16 that fix this problem. There are no known workarounds for this issue.

In Jenkins 2.355 and earlier, LTS 2.332.3 and earlier, an observable timing discrepancy on the login form allows distinguishing between login attempts with an invalid username, and login attempts with a valid username and wrong password, when using the Jenkins user database security realm.

A vulnerability, which was classified as problematic, was found in viafintech Barzahlen Payment Module PHP SDK up to 2.0.0. Affected is the function verify of the file src/Webhook.php. The manipulation leads to observable timing discrepancy. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as 3e7d29dc0ca6c054a6d6e211f32dae89078594c1. It is recommended to upgrade the affected component. VDB-217650 is the identifier assigned to this vulnerability.

The login function of Mealie v1.0.0beta-2 allows attackers to enumerate existing usernames by timing the server's response time.

HumHub Social Network Kit Enterprise v1.3.13 allows remote attackers to find the user accounts existing on any Social Network Kits (including self-hosted ones) by brute-forcing the username after the /u/ initial URI substring, aka Response Discrepancy Information Exposure.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

mailboxd in Zimbra Collaboration Suite 8.8 before 8.8.8; 8.7 before 8.7.11.Patch3; and 8.6 allows Account Enumeration by leveraging a Discrepancy between the "HTTP 404 - account is not active" and "HTTP 401 - must authenticate" errors.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to determine whether a subscriber username is valid. The vulnerability occurs because the Cisco Policy Suite RADIUS server component returns different authentication failure messages based on the validity of usernames. An attacker could use these messages to determine whether a valid subscriber username has been identified. The attacker could use this information in subsequent attacks against the system. Cisco Bug IDs: CSCvg47830.

An email address enumeration vulnerability exists in the password reset function of Rocket.Chat through 3.9.1.

Jetty through 9.4.x is prone to a timing channel in util/security/Password.java, which makes it easier for remote attackers to obtain access by observing elapsed times before rejection of incorrect passwords.

The firewall in Astaro Security Linux before 4.024 sends responses to SYN-FIN packets, which makes it easier for remote attackers to obtain information about the system and construct specialized attacks.

Jenkins GitHub Plugin 1.34.4 and earlier uses a non-constant time comparison function when checking whether the provided and computed webhook signatures are equal, allowing attackers to use statistical methods to obtain a valid webhook signature.

AIX 4.3.3 through AIX 5.1, when direct remote login is disabled, displays a different message if the password is correct, which allows remote attackers to guess the password via brute force methods.

Fixed in v1.5.1, Argo version v1.5.0 was vulnerable to a user-enumeration vulnerability which allowed attackers to determine the usernames of valid (non-SSO) accounts because /api/v1/session returned 401 for an existing username and 404 otherwise.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. Failed web UI login attempts elicit different responses depending on whether a user account exists. Because the responses indicate whether a submitted username is valid or not, they make it easier to identify legitimate usernames. If a login request is sent to ISAPI/Security/sessionLogin/capabilities using a username that exists, it will return the value of the salt given to that username, even if the password is incorrect. However, if a login request is sent using a username that is not present in the database, it will return an empty salt value. This allows attackers to enumerate legitimate usernames, facilitating brute-force attacks. NOTE: this is different from CVE-2020-7057.

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

An issue was discovered in Aviatrix Controller before 5.4.1204. There is a Observable Response Discrepancy from the API, which makes it easier to perform user enumeration via brute force.

Allowing RTT frames to be linked with non randomized MAC address by comparing the sequence numbers can lead to information disclosure. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking

Proxmox VE prior to 3.2: 'AccessControl.pm' User Enumeration Vulnerability

User enumeration vulnerability in ORDAT FOSS-Online before v2.24.01 allows attackers to determine if an account exists in the application by comparing the server responses of the forgot password functionality.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

IBM i 7.2, 7.3, 7.4, and 7.5 Service Tools Server (SST) is vulnerable to SST user enumeration by a remote attacker. This vulnerability can be used by a malicious actor to gather information about SST users that can be targeted in further attacks. IBM X-Force ID: 287538.

In Logpoint before 7.4.0, an attacker can enumerate a valid list of usernames by using publicly exposed URLs of shared widgets.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application fails to normalize the response times of login attempts performed with wrong usernames with the ones executed with correct usernames. A remote unauthenticated attacker could exploit this side-channel information to perform a username enumeration attack and identify valid usernames.

Adenza AxiomSL ControllerView through 10.8.1 is vulnerable to user enumeration. An attacker can identify valid usernames on the platform because a failed login attempt produces a different error message when the username is valid.

User enumeration vulnerability in Arconte Áurea 1.5.0.0 version. The exploitation of this vulnerability could allow an attacker to obtain a list of registered users in the application, obtaining the necessary information to perform more complex attacks on the platform.

A vulnerability in Cisco&nbsp;Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application. The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability.

A vulnerability in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to enumerate user accounts. This vulnerability is due to the improper handling of HTTP headers. An attacker could exploit this vulnerability by sending authenticated requests to an affected system. A successful exploit could allow the attacker to compare the HTTP responses that are returned by the affected system to determine which accounts are valid user accounts.

Umanni RH 1.0 has a user enumeration vulnerability. This issue occurs during password recovery, where a difference in messages could allow an attacker to determine if the user is valid or not, enabling a brute force attack with valid users.

goauthentik is an open-source Identity Provider. In affected versions using a recovery flow with an identification stage an attacker is able to determine if a username exists. Only setups configured with a recovery flow are impacted by this. Anyone with a user account on a system with the recovery flow described above is susceptible to having their username/email revealed as existing. An attacker can easily enumerate and check users' existence using the recovery flow, as a clear message is shown when a user doesn't exist. Depending on configuration this can either be done by username, email, or both. This issue has been addressed in versions 2023.5.6 and 2023.6.2. Users are advised to upgrade. There are no known workarounds for this issue.

Jenkins Configuration as Code Plugin 1.55 and earlier used a non-constant time comparison function when validating an authentication token allowing attackers to use statistical methods to obtain a valid authentication token.

ECDSA/EC/Point.pm in Crypt::Perl before 0.33 does not properly consider timing attacks against the EC point multiplication algorithm.

Username enumeration is possible through Bypassing CAPTCHA in On-premise SureMDM Solution on Windows deployment allows attacker to enumerate local user information via error message. This issue affects SureMDM On-premise: 6.31 and below version

IBM CICS TX Advanced 10.1 could disclose sensitive information to a remote attacker due to observable discrepancy in HTTP responses. IBM X-Force ID: 260814.

The commit 3730880 (April 2023) and v.0.9-beta1 of gugoan Economizzer has a user enumeration vulnerability in the login and forgot password functionalities. The app reacts differently when a user or email address is valid, and when it's not. This may allow an attacker to determine whether a user or email address is valid, or brute force valid usernames and email addresses.

An issue was discovered in eGroupWare 17.1.20190111. A User Enumeration vulnerability exists under calendar/freebusy.php, which allows unauthenticated remote attackers to enumerate the users of web applications based on server response.

Tadiran Telecom Aeonix - CWE-204: Observable Response Discrepancy

IBM Aspera Faspex 5.0.0 through 5.0.10 could disclose sensitive username information due to an observable response discrepancy.