Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

A vulnerability has been found in TOTOLINK X2000R 1.0.0-B20230726.1108 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formWsc. The manipulation of the argument peerRptPin leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Command Injection vulnerability in the web interface in McAfee Advanced Threat Defense (ATD) 3.10, 3.8, 3.6, 3.4 allows remote authenticated users to execute a command of their choice via a crafted HTTP request parameter.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been classified as critical. This affects the function RP_checkCredentialsByBBS of the file /goform/RP_checkCredentialsByBBS. The manipulation of the argument pwd leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access, via dtb pages of the platform portal. This is also known as OSFOURK-23719.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A vulnerability, which was classified as critical, has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This issue affects the function RP_pingGatewayByBBS of the file /goform/RP_pingGatewayByBBS. The manipulation of the argument ip/nm/gw leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 and 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access via the webservice. This is also known as OSFOURK-24120.

A vulnerability, which was classified as critical, has been found in TOTOLINK X2000R 1.0.0-B20230726.1108. Affected by this issue is some unknown functionality of the file /boafrm/formMapDel. The manipulation of the argument devicemac1 leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability has been reported to affect QNAP NAS running QuTScloud, QuTS hero and QTS. If exploited, this vulnerability allows remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QuTScloud, QuTS hero and QTS: QuTScloud c5.0.1.1949 and later QuTS hero h5.0.0.1986 build 20220324 and later QTS 5.0.0.1986 build 20220324 and later

Improper neutralization of special elements used in a user input allows an authenticated malicious user to perform remote code execution in the host system. This vulnerability impacts SonicWall Switch 1.1.1.0-2s and earlier versions

A vulnerability classified as critical was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function setDeviceURL of the file /goform/setDeviceURL. The manipulation of the argument DeviceURL leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper neutralization of special elements used in a command ('Command Injection') vulnerability in File service functionality in Synology DiskStation Manager (DSM) before 6.2.4-25556-2 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field.

In Ericsson Network Location before 2021-07-31, it is possible for an authenticated attacker to inject commands via file_name in the export functionality. For example, a new admin user could be created.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the doSwitchApi function in /cgi-bin/luci/api/switch.

A vulnerability was found in eprintsug ulcc-core. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file cgi/toolbox/toolbox. The manipulation of the argument password leads to command injection. The attack can be launched remotely. The patch is named 811edaae81eb044891594f00062a828f51b22cb1. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-217447.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.1, 4000 Assistant V10 R0, 4000 Manager V10 R1 before V10 R1.42.1, and 4000 Manager V10 R0 allow Authenticated Command Injection via AShbr. This is also known as OSFOURK-24039.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the runPackDiagnose function in /cgi-bin/luci/api/diagnose.

A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.

The affected product is vulnerable to a parameter injection via passphrase, which enables the attacker to supply uncontrolled input.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the switchFastDhcp function in /cgi-bin/luci/api/diagnose.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in ngpsystemcmd.php in which the http parameters "x_modules" and "y_modules" are not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

An issue was discovered in SuperWebMailer 9.00.0.01710. It allows Remote Code Execution via a crafted sendmail command line.

An issue found in D-Link DSL-3782 v.1.03 and before allows remote authenticated users to execute arbitrary code as root via the Router IP Address fields of the network settings page.

An issue in ZenTao Community Edition v.18.6 and before, ZenTao Biz v.8.6 and before, ZenTao Max v.4.7 and before allows an attacker to execute arbitrary code via a crafted script to the Office Conversion Settings function.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

NETGEAR D6220 devices before 1.0.0.76 are affected by command injection by an authenticated user.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

In Citrix XenMobile Server through 10.12 RP9, there is an Authenticated Command Injection vulnerability, leading to remote code execution with root privileges.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20230807. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237517 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in CALDERA 2.8.1. It contains multiple startup "requirements" that execute commands when starting the server. Because these commands can be changed via the REST API, an authenticated user can insert arbitrary commands that will execute when the server is restarted.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000v2 before 1.0.0.53, D8500 before 1.0.3.44, R6220 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.64, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6700v3 before 1.0.2.66, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7800 before 1.0.2.60, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.32.

A vulnerability in the vManage dashboard for the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69974.