The application's installer runs with elevated privileges but resolves system executables and DLLs using untrusted search paths that can include user-writable directories, allowing a local attacker to place malicious binaries with the same names and have them loaded or executed instead of the legitimate system files, resulting in local privilege escalation.

Windows Geolocation Service Remote Code Execution Vulnerability

ScreenToGif is a screen recording tool. In versions from 2.42.1 and prior, ScreenToGif is vulnerable to DLL sideloading via version.dll . When the portable executable is run from a user-writable directory, it loads version.dll from the application directory instead of the Windows System32 directory, allowing arbitrary code execution in the user's context. This is especially impactful because ScreenToGif is primarily distributed as a portable application intended to be run from user-writable locations. At time of publication, there are no publicly available patches.

Windows User Interface Application Core Remote Code Execution Vulnerability

An untrusted search path remote code execution (RCE) vulnerability in the Trend Micro Secuity 2020 (v16.0.0.1146 and below) consumer family of products could allow an attacker to run arbitrary code on a vulnerable system. As the Trend Micro installer tries to load DLL files from its current directory, an arbitrary DLL could also be loaded with the same privileges as the installer if run as Administrator. User interaction is required to exploit the vulnerbaility in that the target must open a malicious directory or device.

AsusScreenXpertServicec.exe and ScreenXpertUpgradeServiceManager.exe in ScreenPad2_Upgrade_Tool.msi V1.0.3 for ASUS PCs with ScreenPad 1.0 (UX450FDX, UX550GDX and UX550GEX) could lead to unsigned code execution with no additional restrictions when a user puts an application at a particular path with a particular file name.

A remote code execution vulnerability exists when Microsoft Office improperly validates input before loading dynamic link library (DLL) files, aka 'Microsoft Office Remote Code Execution Vulnerability'.

An issue found in Wondershare Technology Co.,Ltd PDF Reader v.1.0.1 allows a remote attacker to execute arbitrary commands via the pdfreader_setup_full13143.exe file.

DLL Side Loading vulnerability in the installer for McAfee Application and Change Control (MACC) prior to 8.3 allows local users to execute arbitrary code via execution from a compromised folder.

An issue was discovered in Foxit Studio Photo before 3.6.6.922. It allows local users to gain privileges via a crafted DLL in the current working directory.

Untrusted search path in Windows GDI allows an unauthorized attacker to execute code locally.

An issue was discovered in Foxit Studio Photo before 3.6.6.922. It allows local users to gain privileges via a crafted DLL in the current working directory when FoxitStudioPhoto366_3.6.6.916.exe is used.

ColdFusion versions ColdFusion 2016, and ColdFusion 2018 have a dll search-order hijacking vulnerability. Successful exploitation could lead to privilege escalation.

SumatraPDF is a multi-format reader for Windows. In 3.5.2 and earlier, the PDF reader allows execution of a malicious binary (explorer.exe) located in the same directory as the opened PDF when the user clicks File → “Show in folder”. This behavior leads to arbitrary code execution on the victim’s system with the privileges of the current user, without any warning or user interaction beyond the menu click.

DLL Side-Loading vulnerability in Microsoft Windows Client in McAfee True Key before 4.20.110 allows local users to gain privilege elevation via not verifying a particular DLL file signature.

SumatraPDF is a multi-format reader for Windows. In 3.5.2 and earlier, there is a Untrusted Search Path vulnerability when Advanced Options setting is trigger. The application executes notepad.exe without specifying an absolute path when using the Advanced Options setting. On Windows, this allows execution of a malicious notepad.exe placed in the application's installation directory, leading to arbitrary code execution.

A maliciously crafted project directory, when opening a max file in Autodesk 3ds Max, could lead to execution of arbitrary code in the context of the current process due to an Untrusted Search Path being utilized.

A Code Execution Vulnerability exists in UMPlayer 0.98 in wintab32.dll due to insufficient path restrictions when loading external libraries. which could let a malicious user execute arbitrary code.

Foxit PDF Compressor installers from versions from 7.0.0.183 to 7.7.2.10 contain a DLL preloading vulnerability, wherein it is possible for the installer to load a malicious DLL located in the current working directory of the installer.

An untrusted search path in AMD Radeon settings Installer may lead to a privilege escalation or unauthorized code execution.

An Untrusted Search Path vulnerability in Malwarebytes AdwCleaner 8.0.3 could cause arbitrary code execution with SYSTEM privileges when a malicious DLL library is loaded.

Uncontrolled search path in the installer for the Intel(R) Binary Configuration Tool for Windows, all versions, may allow an authenticated user to potentially enable escalation of privilege via local access.

Untrusted search path vulnerability in the HGFS (aka Shared Folders) feature in VMware Tools 10.0.5 in VMware ESXi 5.0 through 6.0, VMware Workstation Pro 12.1.x before 12.1.1, VMware Workstation Player 12.1.x before 12.1.1, and VMware Fusion 8.1.x before 8.1.1 allows local users to gain privileges via a Trojan horse DLL in the current working directory.

An issue found in Wondershare Technology Co.,Ltd PDFelement v9.1.1 allows a remote attacker to execute arbitrary commands via the pdfelement-pro_setup_full5239.exe file.

An issue found in Wondershare Technology Co., Ltd UniConverter v.14.0.0 allows a remote attacker to execute arbitrary commands via the uniconverter14_64bit_setup_full14204.exe file.

An issue found in Wondershare Technology Co., Ltd DemoCreator v.6.0.0 allows a remote attacker to execute arbitrary commands via the democreator_setup_full7743.exe file.

An issue found in Wondershare Technology Co.,Ltd Creative Centerr v.1.0.8 allows a remote attacker to execute arbitrary commands via the wondershareCC_setup_full10819.exe file.

An issue found in Wondershare Technology Co.,Ltd Anireel 1.5.4 allows a remote attacker to execute arbitrary commands via the anireel_setup_full9589.exe file.

An issue found in Wondershare Technology Co.,Ltd Repairit v.3.5.4 allows a remote attacker to execute arbitrary commands via the repairit_setup_full5913.exe file.

An issue found in Wondershare Technology Co, Ltd Filmora v.12.0.9 allows a remote attacker to execute arbitrary commands via the filmora_setup_full846.exe.

Untrusted search path vulnerability in STAMP Workbench installer all versions allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

The Rapid7 InsightAppSec broker suffers from a DLL injection vulnerability in the 'prunsrv.exe' component of the product. If exploited, a local user of the system (who must already be authenticated to the operating system) can elevate their privileges with this vulnerability to the privilege level of InsightAppSec (usually, SYSTEM). This issue affects version 2019.06.24 and prior versions of the product.

A potential vulnerability was reported in Lenovo System Interface Foundation versions before v1.1.18.3 that could allow an administrative user to load an unsigned DLL.

A DLL search path vulnerability was reported in PaperDisplay Hotkey Service version 1.2.0.8 that could allow privilege escalation. Lenovo has ended support for PaperDisplay Hotkey software as the Night light feature introduced in Windows 10 Build 1703 provides similar features.

Multiple untrusted search path vulnerabilities in Putty beta 0.67 allow local users to execute arbitrary code and conduct DLL hijacking attacks via a Trojan horse (1) UxTheme.dll or (2) ntmarta.dll file in the current working directory.

IBM DB2 High Performance Unload load for LUW 6.1 and 6.5 could allow a local attacker to execute arbitrary code on the system, caused by an untrusted search path vulnerability. By using a executable file, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 168298.

Creative Cloud version 5.9.1 (and earlier) is affected by an Untrusted Search Path vulnerability that might allow attackers to execute their own programs, access unauthorized data files, or modify configuration in unexpected ways. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. The problem extends to any type of critical resource that the application trusts.

Dimension versions 3.4.11 and earlier are affected by an Untrusted Search Path vulnerability that could lead to arbitrary code execution. An attacker could exploit this vulnerability by inserting a malicious file into the search path, which the application might execute instead of the legitimate file. This could occur if the application uses a search path to locate executables or libraries. Exploitation of this issue requires user interaction.

Git for Windows is the Windows port of the revision control system Git. Prior to Git for Windows version 2.39.2, when `gitk` is run on Windows, it potentially runs executables from the current directory inadvertently, which can be exploited with some social engineering to trick users into running untrusted code. A patch is available in version 2.39.2. As a workaround, avoid using `gitk` (or Git GUI's "Visualize History" functionality) in clones of untrusted repositories.

On Windows, if Git LFS operates on a malicious repository with a `..exe` file as well as a file named `git.exe`, and `git.exe` is not found in `PATH`, the `..exe` program will be executed, permitting the attacker to execute arbitrary code. This does not affect Unix systems. Similarly, if the malicious repository contains files named `..exe` and `cygpath.exe`, and `cygpath.exe` is not found in `PATH`, the `..exe` program will be executed when certain Git LFS commands are run. More generally, if the current working directory contains any file with a base name of `.` and a file extension from `PATHEXT` (except `.bat` and `.cmd`), and also contains another file with the same base name as a program Git LFS intends to execute (such as `git`, `cygpath`, or `uname`) and any file extension from `PATHEXT` (including `.bat` and `.cmd`), then, on Windows, when Git LFS attempts to execute the intended program the `..exe`, `..com`, etc., file will be executed instead, but only if the intended program is not found in any directory listed in `PATH`. The vulnerability occurs because when Git LFS detects that the program it intends to run does not exist in any directory listed in `PATH` then Git LFS passes an empty string as the executable file path to the Go `os/exec` package, which contains a bug such that, on Windows, it prepends the name of the current working directory (i.e., `.`) to the empty string without adding a path separator, and as a result searches in that directory for a file with the base name `.` combined with any file extension from `PATHEXT`, executing the first one it finds. (The reason `..bat` and `..cmd` files are not executed in the same manner is that, although the Go `os/exec` package tries to execute them just as it does a `..exe` file, the Microsoft Win32 API `CreateProcess()` family of functions have an undocumented feature in that they apparently recognize when a caller is attempting to execute a batch script file and instead run the `cmd.exe` command interpreter, passing the full set of command line arguments as parameters. These are unchanged from the command line arguments set by Git LFS, and as such, the intended program's name is the first, resulting in a command line like `cmd.exe /c git`, which then fails.) Git LFS has resolved this vulnerability by always reporting an error when a program is not found in any directory listed in `PATH` rather than passing an empty string to the Go `os/exec` package in this case. The bug in the Go `os/exec` package has been reported to the Go project and is expected to be patched after this security advisory is published. The problem was introduced in version 2.12.1 and is patched in version 3.1.3. Users of affected versions should upgrade to version 3.1.3. There are currently no known workarounds at this time.

Untrusted search path vulnerability in ELECOM Camera Assistant 1.00 and QuickFileDealer Ver.1.2.1 and earlier allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

In ListCheck.exe in Acer Care Center 4.x before 4.00.3038, a vulnerability in the loading mechanism of Windows DLLs could allow a local attacker to perform a DLL hijacking attack. This vulnerability is due to incorrect handling of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with local administrator privileges.

Path settings in HMIStudio component of ABB PB610 Panel Builder 600 versions 2.8.0.424 and earlier accept DLLs outside of the program directory, potentially allowing an attacker with access to the local file system the execution of code in the application’s context.

A untrusted search path in Fortinet FortiClientWindows versions 7.4.0, versions 7.2.4 through 7.2.0, versions 7.0.12 through 7.0.0 allows an attacker to run arbitrary code via DLL hijacking and social engineering.

Acrobat Reader versions 24.001.30264, 20.005.30793, 25.001.20982, 24.001.30273, 20.005.30803 and earlier are affected by an Untrusted Search Path vulnerability that might allow attackers to execute arbitrary code in the context of the current user. If the application uses a search path to locate critical resources such as programs, an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. Exploitation of this issue requires user interaction in that the user needs to open a malicious file.

Trend Micro Security (Consumer) 2020 (v16.0.1221 and below) is affected by a DLL hijacking vulnerability that could allow an attacker to use a specific service as an execution and/or persistence mechanism which could execute a malicious program each time the service is started.

An issue was discovered in IDM UltraEdit through 24.10.0.32. To exploit the vulnerability, on unpatched Windows systems, an attacker could include in the same directory as the affected executable a DLL using the name of a Windows DLL. This DLL must be preloaded by the executable (for example, "ntmarta.dll"). When the installer EXE is executed by the user, the DLL located in the EXE's current directory will be loaded instead of the Windows DLL, allowing the attacker to run arbitrary code on the affected system.

A maliciously crafted binary file, when present while loading files in certain Autodesk applications, could lead to execution of arbitrary code in the context of the current process due to an untrusted search path being utilized.

InternetSoft FTP Commander 8.02 and prior has an untrusted search path, allowing DLL hijacking via a Trojan horse dwmapi.dll file.

A vulnerability, which was classified as critical, has been found in Discord 1.0.9188 on Windows. Affected by this issue is some unknown functionality in the library WINSTA.dll. The manipulation leads to uncontrolled search path. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.