An issue found in Wondershare Technology Co.,Ltd Creative Centerr v.1.0.8 allows a remote attacker to execute arbitrary commands via the wondershareCC_setup_full10819.exe file.

An issue found in Wondershare Technology Co.,Ltd Recoverit v.10.6.3 allows a remote attacker to execute arbitrary commands via the recoverit_setup_full4134.exe file.

An issue found in Wondershare Technology Co.,Ltd Anireel 1.5.4 allows a remote attacker to execute arbitrary commands via the anireel_setup_full9589.exe file.

An issue found in Wondershare Technology Co.,Ltd PDF Reader v.1.0.1 allows a remote attacker to execute arbitrary commands via the pdfreader_setup_full13143.exe file.

An issue found in Wondershare Technology Co.,Ltd MobileTrans v.4.0.2 allows a remote attacker to execute arbitrary commands via the mobiletrans_setup_full5793.exe file.

An issue found in Wondershare Technology Co., Ltd DemoCreator v.6.0.0 allows a remote attacker to execute arbitrary commands via the democreator_setup_full7743.exe file.

An issue found in Wondershare Technology Co, Ltd Edrawmind v.10.0.6 allows a remote attacker to executea arbitrary commands via the WindowsCodescs.dll file.

An issue found in Wondershare Technology Co., Ltd UniConverter v.14.0.0 allows a remote attacker to execute arbitrary commands via the uniconverter14_64bit_setup_full14204.exe file.

An issue found in Wondershare Technology Co.,Ltd Edraw-max v.12.0.4 allows a remote attacker to execute arbitrary commands via the edraw-max_setup_full5371.exe file.

An issue found in Wondershare Technology Co.,Ltd PDFelement v9.1.1 allows a remote attacker to execute arbitrary commands via the pdfelement-pro_setup_full5239.exe file.

An issue found in Wondershare Technology Co, Ltd Filmora v.12.0.9 allows a remote attacker to execute arbitrary commands via the filmora_setup_full846.exe.

An issue found in Wondershare Technology Co.,Ltd Dr.Fone v.12.4.9 allows a remote attacker to execute arbitrary commands via the drfone_setup_full3360.exe file.

A vulnerability, which was classified as critical, has been found in Wondershare Filmora 14.5.16. Affected by this issue is some unknown functionality in the library CRYPTBASE.dll of the file NFWCHK.exe of the component Installer. The manipulation leads to uncontrolled search path. Attacking locally is a requirement. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A potential vulnerability was reported in Lenovo System Interface Foundation versions before v1.1.18.3 that could allow an administrative user to load an unsigned DLL.

Trend Micro Endpoint Sensor 1.6 before b1290 has a DLL hijacking vulnerability that allows remote attackers to execute arbitrary code, aka Trend Micro Vulnerability Identifier 2015-0208.

Rapid7 AppSpider Pro installers prior to version 6.14.053 contain a DLL preloading vulnerability, wherein it is possible for the installer to load a malicious DLL located in the current working directory of the installer.

An untrusted search path vulnerability was found in Yarn. When a victim runs certain Yarn commands in a directory with attacker-controlled content, malicious commands could be executed in unexpected ways.

Untrusted search path vulnerability in STAMP Workbench installer all versions allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory.

An issue was discovered in IDM UltraEdit through 24.10.0.32. To exploit the vulnerability, on unpatched Windows systems, an attacker could include in the same directory as the affected executable a DLL using the name of a Windows DLL. This DLL must be preloaded by the executable (for example, "ntmarta.dll"). When the installer EXE is executed by the user, the DLL located in the EXE's current directory will be loaded instead of the Windows DLL, allowing the attacker to run arbitrary code on the affected system.

Potplayer prior to 1.5.39659: DLL Loading Arbitrary Code Execution Vulnerability

The Rapid7 InsightAppSec broker suffers from a DLL injection vulnerability in the 'prunsrv.exe' component of the product. If exploited, a local user of the system (who must already be authenticated to the operating system) can elevate their privileges with this vulnerability to the privilege level of InsightAppSec (usually, SYSTEM). This issue affects version 2019.06.24 and prior versions of the product.

Nitro PDF 8.5.0.26: A specially crafted DLL file can facilitate Arbitrary Code Execution

A Code Execution Vulnerability exists in UMPlayer 0.98 in wintab32.dll due to insufficient path restrictions when loading external libraries. which could let a malicious user execute arbitrary code.

Untrusted search path in FileZilla before 3.41.0-rc1 allows an attacker to gain privileges via a malicious 'fzsftp' binary in the user's home directory.

An issue was discovered in Foxit Studio Photo before 3.6.6.922. It allows local users to gain privileges via a crafted DLL in the current working directory.

Path settings in HMIStudio component of ABB PB610 Panel Builder 600 versions 2.8.0.424 and earlier accept DLLs outside of the program directory, potentially allowing an attacker with access to the local file system the execution of code in the application’s context.

Microsoft Office Remote Code Execution Vulnerability

Dimension versions 3.4.11 and earlier are affected by an Untrusted Search Path vulnerability that could lead to arbitrary code execution. An attacker could exploit this vulnerability by inserting a malicious file into the search path, which the application might execute instead of the legitimate file. This could occur if the application uses a search path to locate executables or libraries. Exploitation of this issue requires user interaction.

SupportAssist Client version 3.8 and 3.9 contains an Untrusted search path vulnerability that allows attackers to load an arbitrary .dll file via .dll planting/hijacking, only by a separate administrative action that is not a default part of the SOSInstallerTool.exe installation for executing arbitrary dll's,

Uncontrolled search path in the Intel(R) RealSense(TM) D400 Series UWP driver for Windows 10 before version 6.1.160.22 may allow an authenticated user to potentially enable escalation of privilege via local access.

Beijing Feishu Technology Co., Ltd Feishu v3.40.3 was discovered to contain an untrusted search path vulnerability.

In ListCheck.exe in Acer Care Center 4.x before 4.00.3038, a vulnerability in the loading mechanism of Windows DLLs could allow a local attacker to perform a DLL hijacking attack. This vulnerability is due to incorrect handling of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with local administrator privileges.

A untrusted search path in Fortinet FortiClientWindows versions 7.4.0, versions 7.2.4 through 7.2.0, versions 7.0.12 through 7.0.0 allows an attacker to run arbitrary code via DLL hijacking and social engineering.

GalaxyClient version 2.0.28.9 loads unsigned DLLs such as zlib1.dll, libgcc_s_dw2-1.dll and libwinpthread-1.dll from PATH, which allows an attacker to potentially run code locally through unsigned DLL loading.

The OpenSSL component of the Teradici PCoIP Software Client prior to version 21.07.0 was compiled without the no-autoload-config option, which allowed an attacker to elevate to the privileges of the running process via placing a specially crafted dll in a build configuration directory.

When Octopus Tentacle is installed using a custom folder location, folder ACLs are not set correctly and could lead to an unprivileged user using DLL side-loading to gain privileged access.

When Octopus Server is installed using a custom folder location, folder ACLs are not set correctly and could lead to an unprivileged user using DLL side-loading to gain privileged access.

Foxit PDF Compressor installers from versions from 7.0.0.183 to 7.7.2.10 contain a DLL preloading vulnerability, wherein it is possible for the installer to load a malicious DLL located in the current working directory of the installer.

In Edge Client version 7.2.x before 7.2.1.1, 7.1.9.x before 7.1.9.8, and 7.1.x-7.1.8.x before 7.1.8.5, an untrusted search path vulnerability in the BIG-IP APM Client Troubleshooting Utility (CTU) for Windows could allow an attacker to load a malicious DLL library from its current directory. User interaction is required to exploit this vulnerability in that the victim must run this utility on the Windows system. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

IBM DB2 High Performance Unload load for LUW 6.1 and 6.5 could allow a local attacker to execute arbitrary code on the system, caused by an untrusted search path vulnerability. By using a executable file, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 168298.

GitPython is a python library used to interact with Git repositories. There is an incomplete fix for CVE-2023-40590. On Windows, GitPython uses an untrusted search path if it uses a shell to run `git`, as well as when it runs `bash.exe` to interpret hooks. If either of those features are used on Windows, a malicious `git.exe` or `bash.exe` may be run from an untrusted repository. This issue has been patched in version 3.1.41.

Lightroom Desktop versions 7.1.2 and earlier are affected by an Untrusted Search Path vulnerability that could result in arbitrary code execution in the context of the current user. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Microsoft Printer Metadata Troubleshooter Tool Remote Code Execution Vulnerability

InternetSoft FTP Commander 8.02 and prior has an untrusted search path, allowing DLL hijacking via a Trojan horse dwmapi.dll file.

Adobe ColdFusion 2016 update 15 and earlier versions, and ColdFusion 2018 update 9 and earlier versions have a dll search-order hijacking vulnerability. Successful exploitation could lead to privilege escalation.

Untrusted Search Path vulnerability in the windows installer of Google Earth Pro versions prior to 7.3.3 allows an attacker to insert malicious local files to execute unauthenticated remote code on the targeted system.

A untrusted search path vulnerability in Fortinet FortiClientWindows 7.0.9 allows an attacker to perform a DLL Hijack attack via a malicious OpenSSL engine library in the search path.

DLL Search Order Hijacking Vulnerability in the installer component of McAfee Host Intrusion Prevention System (Host IPS) for Windows prior to 8.0.0 Patch 15 Update allows attackers with local access to execute arbitrary code via execution from a compromised folder.

A DLL Hijacking vulnerability in Eaton's 9000x Programming and Configuration Software v 2.0.38 and prior allows an attacker to execute arbitrary code by replacing the required DLLs with malicious DLLs when the software try to load vci11un6.DLL and cinpl.DLL.

Trend Micro Anti-Threat Toolkit (ATTK) versions 1.62.0.1218 and below have a vulnerability that may allow an attacker to place malicious files in the same directory, potentially leading to arbitrary remote code execution (RCE) when executed. Another attack vector similar to CVE-2019-9491 was idenitfied and resolved in version 1.62.0.1228 of the tool.