A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPush param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestEmail param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzPatrol param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetIsp param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestFtp param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetMdAlarm param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetAbility param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetZoomFocus param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetAlarm param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetCloudSchedule param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetCrop param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. UpgradePrepare param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. rtmp=stop param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Search param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzSerial param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the netserver recv_command functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted network request can lead to a reboot. An attacker can send a malicious packet to trigger this vulnerability.

An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. In cgi_check_ability the Format API does not have a specific case, the user permission will default to 7. This will give non-administrative users the possibility to format the SD card and reboot the device.

A denial of service vulnerability exists in the cgiserver.cgi Upgrade API functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A memory corruption vulnerability exists in the netserver parse_command_list functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to an out-of-bounds write. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi API command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted series of HTTP requests can lead to denial of service. An attacker can send an HTTP request to trigger this vulnerability.

customapp in Cybozu Office 9.9.0 through 10.3.0 allows remote authenticated users to cause a denial of service (excessive database locking) via a crafted CSV file, a different vulnerability than CVE-2016-1153.

The DNS::GetResult function in dns.cpp in InspIRCd before 2.0.19 allows remote DNS servers to cause a denial of service (netsplit) via an invalid character in a PTR response, as demonstrated by a "\032" (whitespace) character in a hostname.

An attacker could specially craft an FTP request that could crash the PR100088 Modbus gateway versions prior to release R02 (or Software Version 1.1.13166).

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

A vulnerability in the IPv6 traffic processing of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an unexpected restart of the netstack process on an affected device. The vulnerability is due to improper validation of IPv6 traffic sent through an affected device. An attacker could exploit this vulnerability by sending a malformed IPv6 packet through an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition while the netstack process restarts. A sustained attack could lead to a reboot of the device.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Small Business Sx200, Sx300, Sx500, ESW2 Series Managed Switches and Small Business Sx250, Sx350, Sx550 Series Switches could allow an authenticated, remote attacker to cause the SNMP application of an affected device to cease processing traffic, resulting in the CPU utilization reaching one hundred percent. Manual intervention may be required before a device resumes normal operations. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a malicious SNMP packet to an affected device. A successful exploit could allow the attacker to cause the device to cease forwarding traffic, which could result in a denial of service (DoS) condition. Cisco has released firmware updates that address this vulnerability.

A vulnerability in the ISDN functions of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of specific values in the Q.931 information elements. An attacker could exploit this vulnerability by calling the affected device with specific Q.931 information elements being present. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the Cisco Encrypted Traffic Analytics (ETA) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.

A vulnerability in the phone book feature of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a Session Initiation Protocol (SIP) message with a crafted XML payload to an affected device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition. Manual intervention may be required to recover the device. This vulnerability is fixed in Cisco Expressway Series and Cisco TelePresence Video Communication Server Releases X12.5.1 and later.

A vulnerability in the Network Address Translation 64 (NAT64) functions of Cisco IOS Software could allow an unauthenticated, remote attacker to cause either an interface queue wedge or a device reload. The vulnerability is due to the incorrect handling of certain IPv4 packet streams that are sent through the device. An attacker could exploit this vulnerability by sending specific IPv4 packet streams through the device. An exploit could allow the attacker to either cause an interface queue wedge or a device reload, resulting in a denial of service (DoS) condition.

A vulnerability in the authentication service of the Cisco Unified Communications Manager IM and Presence (Unified CM IM&P) Service, Cisco TelePresence Video Communication Server (VCS), and Cisco Expressway Series could allow an unauthenticated, remote attacker to cause a service outage for users attempting to authenticate, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient controls for specific memory operations. An attacker could exploit this vulnerability by sending a malformed Extensible Messaging and Presence Protocol (XMPP) authentication request to an affected system. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing users from successfully authenticating. Exploitation of this vulnerability does not impact users who were authenticated prior to an attack.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliance could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of HTTP and HTTPS requests. An attacker could exploit this vulnerability by sending a malformed HTTP or HTTPS request to an affected device. An exploit could allow the attacker to cause a restart of the web proxy process, resulting in a temporary DoS condition.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit these vulnerabilities by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the implementation of the Short Message Service (SMS) handling functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper processing of SMS protocol data units (PDUs) that are encoded with a special character set. An attacker could exploit this vulnerability by sending a malicious SMS message to an affected device. A successful exploit could allow the attacker to cause the wireless WAN (WWAN) cellular interface module on an affected device to crash, resulting in a DoS condition that would require manual intervention to restore normal operating conditions.

A vulnerability in Locally Significant Certificate (LSC) management for the Cisco Wireless LAN Controller (WLC) could allow an authenticated, remote attacker to cause the device to unexpectedly restart, which causes a denial of service (DoS) condition. The attacker would need to have valid administrator credentials. The vulnerability is due to incorrect input validation of the HTTP URL used to establish a connection to the LSC Certificate Authority (CA). An attacker could exploit this vulnerability by authenticating to the targeted device and configuring a LSC certificate. An exploit could allow the attacker to cause a DoS condition due to an unexpected restart of the device.

A vulnerability in the XML API of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a specifically crafted XML payload. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition until the system is manually rebooted. Software versions prior to X12.5.1 are affected.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability are due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the HTTPS decryption feature of Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Secure Sockets Layer (SSL) server certificates. An attacker could exploit this vulnerability by installing a malformed certificate in a web server and sending a request to it through the Cisco WSA. A successful exploit could allow the attacker to cause an unexpected restart of the proxy process on an affected device.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54 and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). Cisco UCS 6200 and 6300 Fabric Interconnect devices are affected in versions prior to 3.2(2b).

A vulnerability in the web application of Cisco TelePresence Advanced Media Gateway could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation in the web application. An attacker could exploit this vulnerability by sending a crafted authenticated HTTP request to the device. An exploit could allow the attacker to stop services on an affected device. The device may become inoperable and results in a denial of service (DoS) condition.

A vulnerability in the TCP processing engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of TCP traffic. An attacker could exploit this vulnerability by sending a specific sequence of packets at a high rate through an affected device. A successful exploit could allow the attacker to temporarily disrupt traffic through the device while it reboots.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a buffer overflow, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow, resulting in process crashes and a DoS condition on the device. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25), 8.1(1b), 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5) Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). UCS 6200, 6300, and 6400 Fabric Interconnects are affected running software versions prior to 3.2(3j) and 4.0(2a).

A Denial of service (DoS) vulnerability in FortiClient for Linux 6.2.1 and below may allow an user with low privilege to cause FortiClient processes running under root privilege crashes via sending specially crafted IPC client requests to the fctsched process due the nanomsg not been correctly validated.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(20), 7.3(2)D1(1), and 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). UCS 6200 and 6300 Fabric Interconnect are affected in versions prior to 3.2(2b).