In TOTOLINK EX1200T V4.1.2cu.5215, an attacker can obtain sensitive information (wifikey, etc.) without authorization through getSysStatusCfg.
In TOTOLINK EX1200T V4.1.2cu.5215, an attacker can obtain sensitive information (wifikey, wifiname, etc.) without authorization.
In TOTOLINK EX1200T V4.1.2cu.5215, an attacker can obtain sensitive information (wifikey, etc.) without authorization.
TOTOLINK EX1200T V4.1.2cu.5215 contains an information disclosure vulnerability where an attacker can get the apmib configuration file without authorization, and usernames and passwords can be found in the decoded file.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a hard code password for the telnet service which is stored in the component /etc/config/product.ini.
Totolink A830R V4.1.2cu.5182 was discovered to contain a command injection vulnerability via the QUERY_STRING parameter.
A vulnerability in TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows attackers to download the configuration file via sending a crafted HTTP request.
A vulnerability was found in TOTOLINK A3700R 9.1.2u.5822_B20200513 and classified as problematic. Affected by this issue is some unknown functionality of the file /cgi-bin/ExportSettings.sh of the component apmib Configuration Handler. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-272570 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
In TOTOLINK A860R V4.1.2cu.5182_B20201027 there is a hard coded password for root in /etc/shadow.sample.
An access control issue in TOTOLINK A3100R V4.1.2cu.5050_B20200504 and V4.1.2cu.5247_B20211129 allows attackers to obtain sensitive information via a crafted web request.
An issue was discovered on TOTOLINK A850R-V1 through 1.0.1-B20150707.1612 and F1-V2 through 1.1-B20150708.1646 devices. By sending a specific hel,xasf packet to the WAN interface, it is possible to open the web management interface on the WAN interface.
A certain router administration interface (that includes Realtek APMIB 0.11f for Boa 0.94.14rc21) allows remote attackers to retrieve the configuration, including sensitive data (usernames and passwords). This affects TOTOLINK A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0; Rutek RTK 11N AP through 2019-12-12; Sapido GR297n through 2019-12-12; CIK TELECOM MESH ROUTER through 2019-12-12; KCTVJEJU Wireless AP through 2019-12-12; Fibergate FGN-R2 through 2019-12-12; Hi-Wifi MAX-C300N through 2019-12-12; HCN MAX-C300N through 2019-12-12; T-broad GN-866ac through 2019-12-12; Coship EMTA AP through 2019-12-12; and IO-Data WN-AC1167R through 2019-12-12.
A certain router administration interface (that includes Realtek APMIB 0.11f for Boa 0.94.14rc21) stores cleartext administrative passwords in flash memory and in a file. This affects TOTOLINK A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0; Rutek RTK 11N AP through 2019-12-12; Sapido GR297n through 2019-12-12; CIK TELECOM MESH ROUTER through 2019-12-12; KCTVJEJU Wireless AP through 2019-12-12; Fibergate FGN-R2 through 2019-12-12; Hi-Wifi MAX-C300N through 2019-12-12; HCN MAX-C300N through 2019-12-12; T-broad GN-866ac through 2019-12-12; Coship EMTA AP through 2019-12-12; and IO-Data WN-AC1167R through 2019-12-12.
A vulnerability was found in TOTOLINK A720R 4.1.5cu.374. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in TOTOLINK A720R 4.1.5cu.374. It has been classified as problematic. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Config Handler. The manipulation of the argument topicurl with the input getInitCfg/getSysStatusCfg leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
In TOTOLINK EX200 V4.0.3c.7646_B20201211, an attacker can obtain sensitive information without authorization through the function getEasyWizardCfg.
In TOTOLINK EX200 V4.0.3c.7646_B20201211, an attacker can obtain sensitive information without authorization through the function getSysStatusCfg.
A vulnerability has been found in TOTOLINK LR350 up to 9.3.5u.6369 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /formLoginAuth.htm. The manipulation of the argument authCode with the input 1 leads to authorization bypass. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 9.3.5u.6698_B20230810 is able to address this issue. It is recommended to upgrade the affected component.
A vulnerability classified as problematic has been found in Totolink T6 4.1.9cu.5241_B20210923. This affects an unknown part of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249867. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been found in TOTOLINK A3000RU up to 5.9c.5185 and classified as problematic. This vulnerability affects unknown code of the file /cgi-bin/ExportIbmsConfig.sh of the component IBMS Configuration File Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
If Thunderbird is configured to use STARTTLS for an IMAP server, and the server sends a PREAUTH response, then Thunderbird will continue with an unencrypted connection, causing email data to be sent without protection. This vulnerability affects Thunderbird < 68.9.0.
Phoenix Hemodialysis Delivery System SW 3.36 and 3.40, The Phoenix Hemodialysis device does not support data-in-transit encryption (e.g., TLS/SSL) when transmitting treatment and prescription data on the network between the Phoenix system and the Exalis dialysis data management tool. An attacker with access to the network could observe sensitive treatment and prescription data sent between the Phoenix system and the Exalis tool.
Baxter PrismaFlex all versions, PrisMax all versions prior to 3.x, The affected devices do not implement data-in-transit encryption (e.g., TLS/SSL) when configured to send treatment data to a PDMS (Patient Data Management System) or an EMR (Electronic Medical Record) system. An attacker could observe sensitive data sent from the device.
Delta Electronics DIAEnergie (Version 1.7.5 and prior) is vulnerable to cleartext transmission as the web application runs by default on HTTP. This could allow an attacker to remotely read transmitted information between the client and product.
Sigma Spectrum Infusion System v's6.x (model 35700BAX) and Baxter Spectrum Infusion System Version(s) 8.x (model 35700BAX2) at the application layer uses an unauthenticated clear-text communication channel to send and receive system status and operational data. This could allow an attacker that has circumvented network security measures to view sensitive non-private data or to perform a man-in-the-middle attack.
SaTECH BCU in its firmware version 2.1.3 uses the HTTP protocol. The use of the HTTP protocol for web browsing has the problem that information is exchanged in unencrypted text. Since sensitive data such as credentials are exchanged, an attacker could obtain them and log in legitimately.
The device uses an unencrypted, proprietary protocol for communication. Through this protocol, configuration data is transmitted and device authentication is performed. An attacker can thereby intercept the authentication hash and use it to log into the device using a pass-the-hash attack.
All communication between the VNC server and client(s) is unencrypted. This allows an attacker to intercept the traffic and obtain sensitive data.
Jenkins Thycotic DevOps Secrets Vault Plugin 1.0.0 and earlier does not properly mask (i.e., replace with asterisks) credentials in the build log when push mode for durable task logging is enabled.
An issue was discovered in Sesami Cash Point & Transport Optimizer (CPTO) version 6.3.8.6 (#718), allows remote attackers to obtain sensitive information via transmission of unencrypted, cleartext credentials during Password Reset feature.
The PaperCut NG/MF (specifically, the embedded application for Konica Minolta devices) is vulnerable to session hijacking. The PaperCut NG/MF Embedded application is a software interface that runs directly on the touch screen of a multi-function device. It was internally discovered that the communication channel between the embedded application and the server was insecure, which could leak data including sensitive information that may be used to mount an attack on the device. Such an attack could potentially be used to steal data or to perform a phishing attack on the end user.
An information disclosure vulnerability exists in Visual Studio Code Live Share Extension when it exposes tokens in plain text, aka 'Visual Studio Code Live Share Information Disclosure Vulnerability'.
Snap One OvrC Pro versions prior to 7.3 use HTTP connections when downloading a program from their servers. Because they do not use HTTPS, OvrC Pro devices are susceptible to exploitation.
Jenkins Azure Key Vault Plugin 187.va_cd5fecd198a_ and earlier does not properly mask (i.e., replace with asterisks) credentials in the build log when push mode for durable task logging is enabled.
Jenkins Kubernetes Plugin 3909.v1f2c633e8590 and earlier does not properly mask (i.e., replace with asterisks) credentials in the build log when push mode for durable task logging is enabled.
An issue was discovered in Castle Rock SNMPc Online 12.10.10 before 2020-01-28. It includes the username and password values in cleartext within each request's cookie value.
Baxter ExactaMix EM 2400 Versions 1.10, 1.11 and ExactaMix EM1200 Versions 1.1, 1.2 systems use cleartext messages to communicate order information with an order entry system. This could allow an attacker with network access to view sensitive data including PHI.
LOYTEC electronics GmbH LINX Configurator (all versions) is vulnerable to Insecure Permissions. An admin credential is passed as a value of URL parameters without encryption, so it allows remote attackers to steal the password and gain full control of Loytec device configuration.
This vulnerability applies to the Micro Air Vehicle Link (MAVLink) protocol and allows a remote attacker to gain access to sensitive information provided it has access to the communication medium. MAVLink is a header-based protocol that does not perform encryption to improve transfer (and reception speed) and efficiency by design. The increasing popularity of the protocol (used accross different autopilots) has led to its use in wired and wireless mediums through insecure communication channels exposing sensitive information to a remote attacker with ability to intercept network traffic.
Technicolor TC7337NET 08.89.17.23.03 devices allow remote attackers to discover passwords by sniffing the network for an "Authorization: Basic" HTTP header.
ControlEdge PLC (R130.2, R140, R150, and R151) and RTU (R101, R110, R140, R150, and R151) exposes a session token on the network.
ControlEdge PLC (R130.2, R140, R150, and R151) and RTU (R101, R110, R140, R150, and R151) exposes unencrypted passwords on the network.
A vulnerability has been identified in COMOS (All versions < V10.4.4). Caching system in the affected application leaks sensitive information such as user and project information in cleartext via UDP.
An issue was discovered in Stormshield Network Security (SNS) before 4.3.17, 4.4.x through 4.6.x before 4.6.4, and 4.7.x before 4.7.1. It affects user accounts for which the password has an equals sign or space character. The serverd process logs such passwords in cleartext, and potentially sends these logs to the Syslog component.
Couchbase Server before 6.6.6, 7.x before 7.0.5, and 7.1.x before 7.1.2 exposes Sensitive Information to an Unauthorized Actor.
IBM Watson CP4D Data Stores 4.6.0, 4.6.1, 4.6.2, and 4.6.3 does not encrypt sensitive or critical information before storage or transmission which could allow an attacker to obtain sensitive information. IBM X-Force ID: 248740.
An issue was discovered on MOBOTIX S14 MX-V4.2.1.61 devices. The default management application is delivered over cleartext HTTP with Basic Authentication, as demonstrated by the /admin/index.html URI.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.
The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption.
Moxa IKS-G6824A series Versions 4.5 and prior, EDS-405A series Version 3.8 and prior, EDS-408A series Version 3.8 and prior, and EDS-510A series Version 3.8 and prior use plaintext transmission of sensitive data, which may allow an attacker to capture sensitive data such as an administrative password.