In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix memory leak in dm_sw_fini() After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix a memleak in init_credit_return When dma_alloc_coherent fails to allocate dd->cr_base[i].va, init_credit_return should deallocate dd->cr_base and dd->cr_base[i] that allocated before. Or those resources would be never freed and a memleak is triggered.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work() There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: netfs, fscache: Prevent Oops in fscache_put_cache() This function dereferences "cache" and then checks if it's IS_ERR_OR_NULL(). Check first, then dereference.

In the Linux kernel, the following vulnerability has been resolved: nbd: null check for nla_nest_start nla_nest_start() may fail and return NULL. Insert a check and set errno based on other call sites within the same source code.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain Remove netdevice from inet/ingress basechain in case NETDEV_UNREGISTER event is reported, otherwise a stale reference to netdevice remains in the hook list.

In the Linux kernel, the following vulnerability has been resolved: media: usbtv: Remove useless locks in usbtv_video_free() Remove locks calls in usbtv_video_free() because are useless and may led to a deadlock as reported here: https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000 Also remove usbtv_stop() call since it will be called when unregistering the device. Before 'c838530d230b' this issue would only be noticed if you disconnect while streaming and now it is noticeable even when disconnecting while not streaming. [hverkuil: fix minor spelling mistake in log message]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix possible buffer overflow struct hci_dev_info has a fixed size name[8] field so in the event that hdev->name is bigger than that strcpy would attempt to write past its size, so this fixes this problem by switching to use strscpy.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix NULL pointer dereference in f2fs_submit_page_write() BUG: kernel NULL pointer dereference, address: 0000000000000014 RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? __die+0x29/0x70 ? page_fault_oops+0x154/0x4a0 ? prb_read_valid+0x20/0x30 ? __irq_work_queue_local+0x39/0xd0 ? irq_work_queue+0x36/0x70 ? do_user_addr_fault+0x314/0x6c0 ? exc_page_fault+0x7d/0x190 ? asm_exc_page_fault+0x2b/0x30 ? f2fs_submit_page_write+0x6cf/0x780 [f2fs] ? f2fs_submit_page_write+0x736/0x780 [f2fs] do_write_page+0x50/0x170 [f2fs] f2fs_outplace_write_data+0x61/0xb0 [f2fs] f2fs_do_write_data_page+0x3f8/0x660 [f2fs] f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs] f2fs_write_cache_pages+0x3da/0xbe0 [f2fs] ... It is possible that other threads have added this fio to io->bio and submitted the io->bio before entering f2fs_submit_page_write(). At this point io->bio = NULL. If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true, then an NULL pointer dereference error occurs at bio_get(io->bio). The original code for determining zone end was after "out:", which would have missed some fio who is zone end. I've moved this code before "skip:" to make sure it's done for each fio.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend In current scenario if Plug-out and Plug-In performed continuously there could be a chance while checking for dwc->gadget_driver in dwc3_gadget_suspend, a NULL pointer dereference may occur. Call Stack: CPU1: CPU2: gadget_unbind_driver dwc3_suspend_common dwc3_gadget_stop dwc3_gadget_suspend dwc3_disconnect_gadget CPU1 basically clears the variable and CPU2 checks the variable. Consider CPU1 is running and right before gadget_driver is cleared and in parallel CPU2 executes dwc3_gadget_suspend where it finds dwc->gadget_driver which is not NULL and resumes execution and then CPU1 completes execution. CPU2 executes dwc3_disconnect_gadget where it checks dwc->gadget_driver is already NULL because of which the NULL pointer deference occur.

In the Linux kernel, the following vulnerability has been resolved: vhost_task: Handle SIGKILL by flushing work and exiting Instead of lingering until the device is closed, this has us handle SIGKILL by: 1. marking the worker as killed so we no longer try to use it with new virtqueues and new flush operations. 2. setting the virtqueue to worker mapping so no new works are queued. 3. running all the exiting works.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") defines a new macro to calculate the DSC PPS register addresses with PPS number as an input. This macro correctly calculates the addresses till PPS 11 since the addresses increment by 4. So in that case the following macro works correctly to give correct register address: _MMIO(_DSCA_PPS_0 + (pps) * 4) However after PPS 11, the register address for PPS 12 increments by 12 because of RC Buffer memory allocation in between. Because of this discontinuity in the address space, the macro calculates wrong addresses for PPS 12 - 16 resulting into incorrect DSC PPS parameter value read/writes causing DSC corruption. This fixes it by correcting this macro to add the offset of 12 for PPS >=12. v3: Add correct paranthesis for pps argument (Jani Nikula) (cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5)

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: detect stuck ECSA element in probe resp We recently added some validation that we don't try to connect to an AP that is currently in a channel switch process, since that might want the channel to be quiet or we might not be able to connect in time to hear the switching in a beacon. This was in commit c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process"). However, we promptly got a report that this caused new connection failures, and it turns out that the AP that we now cannot connect to is permanently advertising an extended channel switch announcement, even with quiet. The AP in question was an Asus RT-AC53, with firmware 3.0.0.4.380_10760-g21a5898. As a first step, attempt to detect that we're dealing with such a situation, so mac80211 can use this later.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: incorrect pppoe tuple pppoe traffic reaching ingress path does not match the flowtable entry because the pppoe header is expected to be at the network header offset. This bug causes a mismatch in the flow table lookup, so pppoe packets enter the classical forwarding path.

In the Linux kernel, the following vulnerability has been resolved: tcp: add sanity checks to rx zerocopy TCP rx zerocopy intent is to map pages initially allocated from NIC drivers, not pages owned by a fs. This patch adds to can_map_frag() these additional checks: - Page must not be a compound one. - page->mapping must be NULL. This fixes the panic reported by ZhangPeng. syzbot was able to loopback packets built with sendfile(), mapping pages owned by an ext4 file to TCP rx zerocopy. r3 = socket$inet_tcp(0x2, 0x1, 0x0) mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0) r4 = socket$inet_tcp(0x2, 0x1, 0x0) bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10) connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10) r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) fallocate(r5, 0x0, 0x0, 0x85b8) sendfile(r4, r5, 0x0, 0x8ba0) getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23, &(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40) r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0)

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix data corruption in dsync block recovery for small block sizes The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix iopt_access_list_id overwrite bug Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __do_sys_close __se_sys_close __x64_sys_close+0x8b/0x110 do_syscall_x64 The mismatch between the access pointer in the list and the passed-in pointer is resulting from an overwrite of access->iopt_access_list_id, in iopt_add_access(). Called from iommufd_access_change_ioas() when xa_alloc() succeeds but iopt_calculate_iova_alignment() fails. Add a new_id in iopt_add_access() and only update iopt_access_list_id when returning successfully.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: reject configurations that cause integer overflow Reject bogus configs where internal token counter wraps around. This only occurs with very very large requests, such as 17gbyte/s. Its better to reject this rather than having incorrect ratelimit.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix NULL domain on device release In the kdump kernel, the IOMMU operates in deferred_attach mode. In this mode, info->domain may not yet be assigned by the time the release_device function is called. It leads to the following crash in the crash kernel: BUG: kernel NULL pointer dereference, address: 000000000000003c ... RIP: 0010:do_raw_spin_lock+0xa/0xa0 ... _raw_spin_lock_irqsave+0x1b/0x30 intel_iommu_release_device+0x96/0x170 iommu_deinit_device+0x39/0xf0 __iommu_group_remove_device+0xa0/0xd0 iommu_bus_notifier+0x55/0xb0 notifier_call_chain+0x5a/0xd0 blocking_notifier_call_chain+0x41/0x60 bus_notify+0x34/0x50 device_del+0x269/0x3d0 pci_remove_bus_device+0x77/0x100 p2sb_bar+0xae/0x1d0 ... i801_probe+0x423/0x740 Use the release_domain mechanism to fix it. The scalable mode context entry which is not part of release domain should be cleared in release_device().

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.

In the Linux kernel, the following vulnerability has been resolved: fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call do_task_stat() at the same time and the process has NR_THREADS, it will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change do_task_stat() to use sig->stats_lock to gather the statistics outside of ->siglock protected section, in the likely case this code will run lockless.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reset IH OVERFLOW_CLEAR bit Allows us to detect subsequent IH ring buffer overflows as well.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL pointer dereference in tb_port_update_credits() Olliver reported that his system crashes when plugging in Thunderbolt 1 device: BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix data re-injection from stale subflow When the MPTCP PM detects that a subflow is stale, all the packet scheduler must re-inject all the mptcp-level unacked data. To avoid acquiring unneeded locks, it first try to check if any unacked data is present at all in the RTX queue, but such check is currently broken, as it uses TCP-specific helper on an MPTCP socket. Funnily enough fuzzers and static checkers are happy, as the accessed memory still belongs to the mptcp_sock struct, and even from a functional perspective the recovery completed successfully, as the short-cut test always failed. A recent unrelated TCP change - commit d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") - exposed the issue, as the tcp field reorganization makes the mptcp code always skip the re-inection. Fix the issue dropping the bogus call: we are on a slow path, the early optimization proved once again to be evil.

In the Linux kernel, the following vulnerability has been resolved: net: phy: qcom: at803x: fix kernel panic with at8031_probe On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct.

In the Linux kernel, the following vulnerability has been resolved: arp: Prevent overflow in arp_req_get(). syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: netlink: add nla be16/32 types to minlen array BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline] BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline] BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline] BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631 nla_validate_range_unsigned lib/nlattr.c:222 [inline] nla_validate_int_range lib/nlattr.c:336 [inline] validate_nla lib/nlattr.c:575 [inline] ... The message in question matches this policy: [NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255), but because NLA_BE32 size in minlen array is 0, the validation code will read past the malformed (too small) attribute. Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing: those likely should be added too.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path If devm_krealloc() fails, then 'efuse' is leaking. So free it to avoid a leak.

In the Linux kernel, the following vulnerability has been resolved: aoe: avoid potential deadlock at set_capacity Move set_capacity() outside of the section procected by (&d->lock). To avoid possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- [1] lock(&bdev->bd_size_lock); local_irq_disable(); [2] lock(&d->lock); [3] lock(&bdev->bd_size_lock); <Interrupt> [4] lock(&d->lock); *** DEADLOCK *** Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity(). [2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc() is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call. In this situation an attempt to acquire [4]lock(&d->lock) from aoecmd_cfg_rsp() will lead to deadlock. So the simplest solution is breaking lock dependency [2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity() outside.

In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: backlight: hx8357: Fix potential NULL pointer dereference The "im" pins are optional. Add missing check in the hx8357_probe().

In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock" This reverts commit 1a1975551943f681772720f639ff42fbaa746212. This commit causes interrupts to be lost for FCoE devices, since it changed sping locks from "bh" to "irqsave". Instead, a work queue should be used, and will be addressed in a separate commit.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: improve CSA/ECSA connection refusal As mentioned in the previous commit, we pretty quickly found that some APs have ECSA elements stuck in their probe response, so using that to not attempt to connect while CSA is happening we never connect to such an AP. Improve this situation by checking more carefully and ignoring the ECSA if cfg80211 has previously detected the ECSA element being stuck in the probe response. Additionally, allow connecting to an AP that's switching to a channel it's already using, unless it's using quiet mode. In this case, we may just have to adjust bandwidth later. If it's actually switching channels, it's better not to try to connect in the middle of that.

In the Linux kernel, the following vulnerability has been resolved: ath11k: fix kernel panic during unload/load ath11k modules Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix the following kernel panic when unload/load ath11k modules for few iterations. [ 971.201365] Unable to handle kernel paging request at virtual address 6d97a208 [ 971.204227] pgd = 594c2919 [ 971.211478] [6d97a208] *pgd=00000000 [ 971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0 [ 971.434256] Hardware name: Generic DT based system [ 971.440165] PC is at napi_by_id+0x10/0x40 [ 971.445019] LR is at netif_napi_add+0x160/0x1dc [ 971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc) [ 971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb]) [ 971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb]) [ 971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94) [ 971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450) [ 971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8) [ 971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60) [ 971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140) [ 971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4) [ 971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8) [ 971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0) [ 971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac) [ 971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200) [ 971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc) [ 971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c) [ 971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_hash - Remove bogus SGL free on zero-length error path When a zero-length message is hashed by algif_hash, and an error is triggered, it tries to free an SG list that was never allocated in the first place. Fix this by not freeing the SG list on the zero-length error path.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: edma: Add some null pointer checks to the edma_probe devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix missing reserved tailroom Use rbi->len instead of rcd->len for non-dataring packet. Found issue: XDP_WARN: xdp_update_frame_from_buff(line:278): Driver BUG: missing reserved tailroom WARNING: CPU: 0 PID: 0 at net/core/xdp.c:586 xdp_warn+0xf/0x20 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 6.5.1 #1 RIP: 0010:xdp_warn+0xf/0x20 ... ? xdp_warn+0xf/0x20 xdp_do_redirect+0x15f/0x1c0 vmxnet3_run_xdp+0x17a/0x400 [vmxnet3] vmxnet3_process_xdp+0xe4/0x760 [vmxnet3] ? vmxnet3_tq_tx_complete.isra.0+0x21e/0x2c0 [vmxnet3] vmxnet3_rq_rx_complete+0x7ad/0x1120 [vmxnet3] vmxnet3_poll_rx_only+0x2d/0xa0 [vmxnet3] __napi_poll+0x20/0x180 net_rx_action+0x177/0x390

In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix firmware activation deadlock scenarios Lockdep reports the following deadlock scenarios for CXL root device power-management, device_prepare(), operations, and device_shutdown() operations for 'nd_region' devices: Chain exists of: &nvdimm_region_key --> &nvdimm_bus->reconfig_mutex --> system_transition_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(system_transition_mutex); lock(&nvdimm_bus->reconfig_mutex); lock(system_transition_mutex); lock(&nvdimm_region_key); Chain exists of: &cxl_nvdimm_bridge_key --> acpi_scan_lock --> &cxl_root_key Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cxl_root_key); lock(acpi_scan_lock); lock(&cxl_root_key); lock(&cxl_nvdimm_bridge_key); These stem from holding nvdimm_bus_lock() over hibernate_quiet_exec() which walks the entire system device topology taking device_lock() along the way. The nvdimm_bus_lock() is protecting against unregistration, multiple simultaneous ops callers, and preventing activate_show() from racing activate_store(). For the first 2, the lock is redundant. Unregistration already flushes all ops users, and sysfs already prevents multiple threads to be active in an ops handler at the same time. For the last userspace should already be waiting for its last activate_store() to complete, and does not need activate_show() to flush the write side, so this lock usage can be deleted in these attributes.

In the Linux kernel, the following vulnerability has been resolved: tcp: make sure init the accept_queue's spinlocks once When I run syz's reproduction C program locally, it causes the following issue: pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0! WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7 30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900 RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000 R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000 FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_unlock (kernel/locking/spinlock.c:186) inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321) inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358) tcp_check_req (net/ipv4/tcp_minisocks.c:868) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) process_backlog (./include/linux/rcupdate.h:779) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6604) __do_softirq (./arch/x86/include/asm/jump_label.h:27) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4374) ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469) tcp_rcv_state_process (net/ipv4/tcp_input.c:6657) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929) __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968) release_sock (net/core/sock.c:3536) inet_wait_for_connect (net/ipv4/af_inet.c:609) __inet_stream_connect (net/ipv4/af_inet.c:702) inet_stream_connect (net/ipv4/af_inet.c:748) __sys_connect (./include/linux/file.h:45 net/socket.c:2064) __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7fa10ff05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640 R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20 </TASK> The issue triggering process is analyzed as follows: Thread A Thread B tcp_v4_rcv //receive ack TCP packet inet_shutdown tcp_check_req tcp_disconnect //disconnect sock ... tcp_set_state(sk, TCP_CLOSE) inet_csk_complete_hashdance ... inet_csk_reqsk_queue_add ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fscrypt: stop using keyrings subsystem for fscrypt_master_key The approach of fs/crypto/ internally managing the fscrypt_master_key structs as the payloads of "struct key" objects contained in a "struct key" keyring has outlived its usefulness. The original idea was to simplify the code by reusing code from the keyrings subsystem. However, several issues have arisen that can't easily be resolved: - When a master key struct is destroyed, blk_crypto_evict_key() must be called on any per-mode keys embedded in it. (This started being the case when inline encryption support was added.) Yet, the keyrings subsystem can arbitrarily delay the destruction of keys, even past the time the filesystem was unmounted. Therefore, currently there is no easy way to call blk_crypto_evict_key() when a master key is destroyed. Currently, this is worked around by holding an extra reference to the filesystem's request_queue(s). But it was overlooked that the request_queue reference is *not* guaranteed to pin the corresponding blk_crypto_profile too; for device-mapper devices that support inline crypto, it doesn't. This can cause a use-after-free. - When the last inode that was using an incompletely-removed master key is evicted, the master key removal is completed by removing the key struct from the keyring. Currently this is done via key_invalidate(). Yet, key_invalidate() takes the key semaphore. This can deadlock when called from the shrinker, since in fscrypt_ioctl_add_key(), memory is allocated with GFP_KERNEL under the same semaphore. - More generally, the fact that the keyrings subsystem can arbitrarily delay the destruction of keys (via garbage collection delay, or via random processes getting temporary key references) is undesirable, as it means we can't strictly guarantee that all secrets are ever wiped. - Doing the master key lookups via the keyrings subsystem results in the key_permission LSM hook being called. fscrypt doesn't want this, as all access control for encrypted files is designed to happen via the files themselves, like any other files. The workaround which SELinux users are using is to change their SELinux policy to grant key search access to all domains. This works, but it is an odd extra step that shouldn't really have to be done. The fix for all these issues is to change the implementation to what I should have done originally: don't use the keyrings subsystem to keep track of the filesystem's fscrypt_master_key structs. Instead, just store them in a regular kernel data structure, and rework the reference counting, locking, and lifetime accordingly. Retain support for RCU-mode key lookups by using a hash table. Replace fscrypt_sb_free() with fscrypt_sb_delete(), which releases the keys synchronously and runs a bit earlier during unmount, so that block devices are still available. A side effect of this patch is that neither the master keys themselves nor the filesystem keyrings will be listed in /proc/keys anymore. ("Master key users" and the master key users keyrings will still be listed.) However, this was mostly an implementation detail, and it was intended just for debugging purposes. I don't know of anyone using it. This patch does *not* change how "master key users" (->mk_users) works; that still uses the keyrings subsystem. That is still needed for key quotas, and changing that isn't necessary to solve the issues listed above. If we decide to change that too, it would be a separate patch. I've marked this as fixing the original commit that added the fscrypt keyring, but as noted above the most important issue that this patch fixes wasn't introduced until the addition of inline encryption support.

In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend.

In the Linux kernel, the following vulnerability has been resolved: binder: signal epoll threads of self-work In (e)poll mode, threads often depend on I/O events to determine when data is ready for consumption. Within binder, a thread may initiate a command via BINDER_WRITE_READ without a read buffer and then make use of epoll_wait() or similar to consume any responses afterwards. It is then crucial that epoll threads are signaled via wakeup when they queue their own work. Otherwise, they risk waiting indefinitely for an event leaving their work unhandled. What is worse, subsequent commands won't trigger a wakeup either as the thread has pending work.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b

In the Linux kernel, the following vulnerability has been resolved: drm/dp: Fix divide-by-zero regression on DP MST unplug with nouveau Fix a regression when using nouveau and unplugging a StarTech MSTDP122DP DisplayPort 1.2 MST hub (the same regression does not appear when using a Cable Matters DisplayPort 1.4 MST hub). Trace: divide error: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 2962 Comm: Xorg Not tainted 6.8.0-rc3+ #744 Hardware name: Razer Blade/DANA_MB, BIOS 01.01 08/31/2018 RIP: 0010:drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] Code: c6 b8 01 00 00 00 75 61 01 c6 41 0f af f3 41 0f af f1 c1 e1 04 48 63 c7 31 d2 89 ff 48 8b 5d f8 c9 48 0f af f1 48 8d 44 06 ff <48> f7 f7 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 45 31 RSP: 0018:ffffb2c5c211fa30 EFLAGS: 00010206 RAX: ffffffffffffffff RBX: 0000000000000000 RCX: 0000000000f59b00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb2c5c211fa48 R08: 0000000000000001 R09: 0000000000000020 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000023b4a R13: ffff91d37d165800 R14: ffff91d36fac6d80 R15: ffff91d34a764010 FS: 00007f4a1ca3fa80(0000) GS:ffff91d6edbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559491d49000 CR3: 000000011d180002 CR4: 00000000003706f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? die+0x37/0xa0 ? do_trap+0xd4/0xf0 ? do_error_trap+0x71/0xb0 ? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] ? exc_divide_error+0x3a/0x70 ? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] ? asm_exc_divide_error+0x1b/0x20 ? drm_dp_bw_overhead+0xb4/0x110 [drm_display_helper] ? drm_dp_calc_pbn_mode+0x2e/0x70 [drm_display_helper] nv50_msto_atomic_check+0xda/0x120 [nouveau] drm_atomic_helper_check_modeset+0xa87/0xdf0 [drm_kms_helper] drm_atomic_helper_check+0x19/0xa0 [drm_kms_helper] nv50_disp_atomic_check+0x13f/0x2f0 [nouveau] drm_atomic_check_only+0x668/0xb20 [drm] ? drm_connector_list_iter_next+0x86/0xc0 [drm] drm_atomic_commit+0x58/0xd0 [drm] ? __pfx___drm_printfn_info+0x10/0x10 [drm] drm_atomic_connector_commit_dpms+0xd7/0x100 [drm] drm_mode_obj_set_property_ioctl+0x1c5/0x450 [drm] ? __pfx_drm_connector_property_set_ioctl+0x10/0x10 [drm] drm_connector_property_set_ioctl+0x3b/0x60 [drm] drm_ioctl_kernel+0xb9/0x120 [drm] drm_ioctl+0x2d0/0x550 [drm] ? __pfx_drm_connector_property_set_ioctl+0x10/0x10 [drm] nouveau_drm_ioctl+0x61/0xc0 [nouveau] __x64_sys_ioctl+0xa0/0xf0 do_syscall_64+0x76/0x140 ? do_syscall_64+0x85/0x140 ? do_syscall_64+0x85/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f4a1cd1a94f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 RSP: 002b:00007ffd2f1df520 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd2f1df5b0 RCX: 00007f4a1cd1a94f RDX: 00007ffd2f1df5b0 RSI: 00000000c01064ab RDI: 000000000000000f RBP: 00000000c01064ab R08: 000056347932deb8 R09: 000056347a7d99c0 R10: 0000000000000000 R11: 0000000000000246 R12: 000056347938a220 R13: 000000000000000f R14: 0000563479d9f3f0 R15: 0000000000000000 </TASK> Modules linked in: rfcomm xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc ccm cmac algif_hash overlay algif_skcipher af_alg bnep binfmt_misc snd_sof_pci_intel_cnl snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_sof_utils snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core snd_compress snd_sof_intel_hda_mlink snd_hda_ext_core iwlmvm intel_rapl_msr intel_rapl_common intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp mac80211 coretemp kvm_intel snd_hda_codec_hdmi kvm snd_hda_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fbcon: always restore the old font data in fbcon_do_set_font() Commit a5a923038d70 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: <TASK> con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.)

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd. Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks.

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks The ->runtime_suspend() and ->runtime_resume() callbacks are not expected to call spi_controller_suspend() and spi_controller_resume(). Remove calls to those in the cadence-qspi driver. Those helpers have two roles currently: - They stop/start the queue, including dealing with the kworker. - They toggle the SPI controller SPI_CONTROLLER_SUSPENDED flag. It requires acquiring ctlr->bus_lock_mutex. Step one is irrelevant because cadence-qspi is not queued. Step two however has two implications: - A deadlock occurs, because ->runtime_resume() is called in a context where the lock is already taken (in the ->exec_op() callback, where the usage count is incremented). - It would disallow all operations once the device is auto-suspended. Here is a brief call tree highlighting the mutex deadlock: spi_mem_exec_op() ... spi_mem_access_start() mutex_lock(&ctlr->bus_lock_mutex) cqspi_exec_mem_op() pm_runtime_resume_and_get() cqspi_resume() spi_controller_resume() mutex_lock(&ctlr->bus_lock_mutex) ... spi_mem_access_end() mutex_unlock(&ctlr->bus_lock_mutex) ...

In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4]