In the Linux kernel, the following vulnerability has been resolved: phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix refcount leak in amd_pmc_probe pci_get_domain_bus_and_slot() takes reference, the caller should release the reference by calling pci_dev_put() after use. Call pci_dev_put() in the error path to fix this.

In the Linux kernel, the following vulnerability has been resolved: ASoC: hdmi-codec: Fix OOB memory accesses Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN.

An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32.

In the Linux kernel, the following vulnerability has been resolved: media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().

In the Linux kernel, the following vulnerability has been resolved: asix: fix uninit-value in asix_mdio_read() asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized. Fail log: BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix VLAN traffic leaks PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but was not reset when it is disabled, which may cause traffic leaks: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br1 ip link set br0 type bridge vlan_filtering 0 ip link set br1 type bridge vlan_filtering 0 # traffic in br0 and br1 will start leaking to each other As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the PCR_MATRIX write from mt7530_port_set_vlan_aware.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock() Function ubifs_wbuf_write_nolock() may access buf out of bounds in following process: ubifs_wbuf_write_nolock(): aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096 if (aligned_len <= wbuf->avail) ... // Not satisfy if (wbuf->used) { ubifs_leb_write() // Fill some data in avail wbuf len -= wbuf->avail; // len is still not 8-bytes aligned aligned_len -= wbuf->avail; } n = aligned_len >> c->max_write_shift; if (n) { n <<= c->max_write_shift; err = ubifs_leb_write(c, wbuf->lnum, buf + written, wbuf->offs, n); // n > len, read out of bounds less than 8(n-len) bytes } , which can be catched by KASAN: ========================================================= BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0 Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128 Workqueue: writeback wb_workfn (flush-ubifs_0_0) Call Trace: kasan_report.cold+0x81/0x165 nand_write_page_swecc+0xa9/0x160 ubifs_leb_write+0xf2/0x1b0 [ubifs] ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs] write_head+0xdc/0x1c0 [ubifs] ubifs_jnl_write_inode+0x627/0x960 [ubifs] wb_workfn+0x8af/0xb80 Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8 bytes aligned, the 'len' represents the true length of buf (which is allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully to write leb safely. Fetch a reproducer in [Link].

An out-of-bounds read vulnerability was found in smb2_dump_detail in fs/smb/client/smb2ops.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.

In the Linux kernel, the following vulnerability has been resolved: NFS: fs_context: validate UDP retrans to prevent shift out-of-bounds Fix shift out-of-bounds in xprt_calc_majortimeo(). This is caused by a garbage timeout (retrans) mount option being passed to nfs mount, in this case from syzkaller. If the protocol is XPRT_TRANSPORT_UDP, then 'retrans' is a shift value for a 64-bit long integer, so 'retrans' cannot be >= 64. If it is >= 64, fail the mount and return an error.

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix possible out-of-bound read in ath12k_htt_pull_ppdu_stats() len is extracted from HTT message and could be an unexpected value in case errors happen, so add validation before using to avoid possible out-of-bound read in the following message iteration and parsing. The same issue also applies to ppdu_info->ppdu_stats.common.num_users, so validate it before using too. These are found during code review. Compile test only.

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue.

In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Disable KASAN in apply_alternatives() Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ]

In the Linux kernel, the following vulnerability has been resolved: s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl().

There is a use-after-free vulnerability in the Linux kernel through 5.5.2 in the n_tty_receive_buf_common function in drivers/tty/n_tty.c.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: exthdr: fix 4-byte stack OOB write If priv->len is a multiple of 4, then dst[len / 4] can write past the destination array which leads to stack corruption. This construct is necessary to clean the remainder of the register in case ->len is NOT a multiple of the register size, so make it conditional just like nft_payload.c does. The bug was added in 4.1 cycle and then copied/inherited when tcp/sctp and ip option support was added. Bug reported by Zero Day Initiative project (ZDI-CAN-21950, ZDI-CAN-21951, ZDI-CAN-21961).

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe().

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea.

In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was stored to memory at: virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline] virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was created at: slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline] virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline] virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: vsock-loopback vsock_loopback_work ===================================================== The following simple reproducer can cause the issue described above: int main(void) { int sock; struct sockaddr_vm addr = { .svm_family = AF_VSOCK, .svm_cid = VMADDR_CID_ANY, .svm_port = 1234, }; sock = socket(AF_VSOCK, SOCK_STREAM, 0); connect(sock, (struct sockaddr *)&addr, sizeof(addr)); return 0; } This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the `struct virtio_vsock_hdr` are not initialized when a new skb is allocated in `virtio_transport_init_hdr()`. This patch resolves the issue by initializing these fields during allocation.

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

Linux disk/nic frontends data leaks T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742).

An issue was discovered in the Linux kernel before 5.8.1. net/bluetooth/hci_event.c has a slab out-of-bounds read in hci_extended_inquiry_result_evt, aka CID-51c19bf3d5cf.

A NULL pointer dereference flaw in diFree in fs/jfs/inode.c in Journaled File System (JFS)in the Linux kernel. This could allow a local attacker to crash the system or leak kernel internal information.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.

An out-of-bounds (OOB) memory access flaw was found in fs/f2fs/node.c in the f2fs module in the Linux kernel in versions before 5.12.0-rc4. A bounds check failure allows a local attacker to gain access to out-of-bounds memory leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: orangefs: fix a oob in orangefs_debug_write I got a syzbot report: slab-out-of-bounds Read in orangefs_debug_write... several people suggested fixes, I tested Al Viro's suggestion and made this patch.

In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix possible overflow in DPE length check Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate zero num_subauth before sub_auth is accessed Access psid->sub_auth[psid->num_subauth - 1] without checking if num_subauth is non-zero leads to an out-of-bounds read. This patch adds a validation step to ensure num_subauth != 0 before sub_auth is accessed.

A flaw was found in the Linux kernel. A NULL pointer dereference may occur while a slip driver is in progress to detach in sl_tx_timeout in drivers/net/slip/slip.c. This issue could allow an attacker to crash the system or leak internal kernel information.

NVIDIA GPU Display Driver for Linux, all versions, contains a vulnerability in the kernel mode layer (nvidia.ko) in which it does not completely honor operating system file system permissions to provide GPU device-level isolation, which may lead to denial of service or information disclosure.

In the Linux kernel, the following vulnerability has been resolved: usb: isp1760: Fix out-of-bounds array access Running the driver through kasan gives an interesting splat: BUG: KASAN: global-out-of-bounds in isp1760_register+0x180/0x70c Read of size 20 at addr f1db2e64 by task swapper/0/1 (...) isp1760_register from isp1760_plat_probe+0x1d8/0x220 (...) This happens because the loop reading the regmap fields for the different ISP1760 variants look like this: for (i = 0; i < HC_FIELD_MAX; i++) { ... } Meaning it expects the arrays to be at least HC_FIELD_MAX - 1 long. However the arrays isp1760_hc_reg_fields[], isp1763_hc_reg_fields[], isp1763_hc_volatile_ranges[] and isp1763_dc_volatile_ranges[] are dynamically sized during compilation. Fix this by putting an empty assignment to the [HC_FIELD_MAX] and [DC_FIELD_MAX] array member at the end of each array. This will make the array one member longer than it needs to be, but avoids the risk of overwriting whatever is inside [HC_FIELD_MAX - 1] and is simple and intuitive to read. Also add comments explaining what is going on.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads8688: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: rockchip_saradc: fix information leak in triggered buffer The 'data' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: iio: pressure: zpa2326: fix information leak in triggered buffer The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: xfrm: state: fix out-of-bounds read during lookup lookup and resize can run in parallel. The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array. rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask; While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) { This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again). Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent. The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side. xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: avoid overflows in nft_hash_buckets() Number of buckets being stored in 32bit variables, we have to ensure that no overflows occur in nft_hash_buckets() syzbot injected a size == 0x40000000 and reported: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 29539 Comm: syz-executor.4 Not tainted 5.12.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 __roundup_pow_of_two include/linux/log2.h:57 [inline] nft_hash_buckets net/netfilter/nft_set_hash.c:411 [inline] nft_hash_estimate.cold+0x19/0x1e net/netfilter/nft_set_hash.c:652 nft_select_set_ops net/netfilter/nf_tables_api.c:3586 [inline] nf_tables_newset+0xe62/0x3110 net/netfilter/nf_tables_api.c:4322 nfnetlink_rcv_batch+0xa09/0x24b0 net/netfilter/nfnetlink.c:488 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:612 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:630 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix information leak in btrfs_ioctl_logical_to_ino() Syzbot reported the following information leak for in btrfs_ioctl_logical_to_ino(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x110 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: __kmalloc_large_node+0x231/0x370 mm/slub.c:3921 __do_kmalloc_node mm/slub.c:3954 [inline] __kmalloc_node+0xb07/0x1060 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] kvmalloc_node+0xc0/0x2d0 mm/util.c:634 kvmalloc include/linux/slab.h:766 [inline] init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779 btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 40-65535 of 65536 are uninitialized Memory access of size 65536 starts at ffff888045a40000 This happens, because we're copying a 'struct btrfs_data_container' back to user-space. This btrfs_data_container is allocated in 'init_data_container()' via kvmalloc(), which does not zero-fill the memory. Fix this by using kvzalloc() which zeroes out the memory on allocation.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: kmx61: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one Since the netlink attribute range validation provides inclusive checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one. One crash stack for demonstration: ================================================================== BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 Read of size 6 at addr 001102080000000c by task fuzzer.386/9508 CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_report+0xe0/0x750 mm/kasan/report.c:398 kasan_report+0x139/0x170 mm/kasan/report.c:495 kasan_check_range+0x287/0x290 mm/kasan/generic.c:189 memcpy+0x25/0x60 mm/kasan/shadow.c:65 ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline] nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453 genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd Update the policy to ensure correct validation.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: limit printed string from FW file There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have.

A use-after-free flaw was found in r592_remove in drivers/memstick/host/r592.c in media access in the Linux Kernel. This flaw allows a local attacker to crash the system at device disconnect, possibly leading to a kernel information leak.

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: Prevent out of bounds read in mvneta_config_rss() The pp->indir[0] value comes from the user. It is passed to: if (cpu_online(pp->rxq_def)) inside the mvneta_percpu_elect() function. It needs bounds checkeding to ensure that it is not beyond the end of the cpu bitmap.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix information leak in triggered buffer The 'scan' local struct is used to push data to user space from a triggered buffer, but it has a hole between the sample (unsigned int) and the timestamp. This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: socinfo: Avoid out of bounds read of serial number On MSM8916 devices, the serial number exposed in sysfs is constant and does not change across individual devices. It's always: db410c:/sys/devices/soc0$ cat serial_number 2644893864 The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not have support for the serial_num field in the socinfo struct. There is an existing check to avoid exposing the serial number in that case, but it's not correct: When checking the item_size returned by SMEM, we need to make sure the *end* of the serial_num is within bounds, instead of comparing with the *start* offset. The serial_number currently exposed on MSM8916 devices is just an out of bounds read of whatever comes after the socinfo struct in SMEM. Fix this by changing offsetof() to offsetofend(), so that the size of the field is also taken into account.

In the Linux kernel, the following vulnerability has been resolved: iio: light: vcnl4035: fix information leak in triggered buffer The 'buffer' local array is used to push data to userspace from a triggered buffer, but it does not set an initial value for the single data element, which is an u16 aligned to 8 bytes. That leaves at least 4 bytes uninitialized even after writing an integer value with regmap_read(). Initialize the array to zero before using it to avoid pushing uninitialized information to userspace.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix LED ID check in led_tg_check() Syzbot has reported the following BUG detected by KASAN: BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ... Call Trace: <TASK> dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10 __sock_sendmsg+0x223/0x270 ____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10 __sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.