In the Linux kernel, the following vulnerability has been resolved: crypto: xts - Handle EBUSY correctly As it is xts only handles the special return value of EINPROGRESS, which means that in all other cases it will free data related to the request. However, as the caller of xts may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after failed write When buffered write fails to copy data into underlying page cache page, ocfs2_write_end_nolock() just zeroes out and dirties the page. This can leave dirty page beyond EOF and if page writeback tries to write this page before write succeeds and expands i_size, page gets into inconsistent state where page dirty bit is clear but buffer dirty bits stay set resulting in page data never getting written and so data copied to the page is lost. Fix the problem by invalidating page beyond EOF after failed write.

In the Linux kernel, the following vulnerability has been resolved: rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails If getting an ID or setting up a work queue in rbd_dev_create() fails, use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts is triggered in do_rbd_add(). The root cause is that the ownership of these structures is transfered to rbd_dev prematurely and they all end up getting freed when rbd_dev_create() calls rbd_dev_free() prior to returning to do_rbd_add(). Found by Linux Verification Center (linuxtesting.org) with SVACE, an incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.

In the Linux kernel, the following vulnerability has been resolved: ext4: improve error handling from ext4_dirhash() The ext4_dirhash() will *almost* never fail, especially when the hash tree feature was first introduced. However, with the addition of support of encrypted, casefolded file names, that function can most certainly fail today. So make sure the callers of ext4_dirhash() properly check for failures, and reflect the errors back up to their callers.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix use after free for wext Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work.

In the Linux kernel, the following vulnerability has been resolved: ublk: fail to start device if queue setup is interrupted In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered. Reported by German when working on qemu-storage-deamon which requires single thread ublk daemon.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5 According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode. When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed. ============================================================= UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]' CPU: 37 PID: 1678 Comm: cat Not tainted 6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace: dump_backtrace+0xe0/0x130 show_stack+0x20/0x60 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 ubsan_epilogue+0x10/0x50 __ubsan_handle_out_of_bounds+0x80/0x90 acpi_ds_exec_end_op+0x1bc/0x6d8 acpi_ps_parse_loop+0x57c/0x618 acpi_ps_parse_aml+0x1e0/0x4b4 acpi_ps_execute_method+0x24c/0x2b8 acpi_ns_evaluate+0x3a8/0x4bc acpi_evaluate_object+0x15c/0x37c acpi_evaluate_integer+0x54/0x15c show_power+0x8c/0x12c [acpi_power_meter]

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function When a reset notify IPC message is received, the ISR schedules a work function and passes the ISHTP device to it via a global pointer ishtp_dev. If ish_probe() fails, the devm-managed device resources including ishtp_dev are freed, but the work is not cancelled, causing a use-after-free when the work function tries to access ishtp_dev. Use devm_work_autocancel() instead, so that the work is automatically cancelled if probe fails.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix htt mlo-offset event locking The ath12k active pdevs are protected by RCU but the htt mlo-offset event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: dm: fix dm_blk_report_zones If dm_get_live_table() returned NULL, dm_put_live_table() was never called. Also, it is possible that md->zone_revalidate_map will change while calling this function. Only read it once, so that we are always using the same value. Otherwise we might miss a call to dm_put_live_table(). Finally, while md->zone_revalidate_map is set and a process is calling blk_revalidate_disk_zones() to set up the zone append emulation resources, it is possible that another process, perhaps triggered by blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If blk_revalidate_disk_zones() fails, these resources can be freed while the other process is still using them, causing a use-after-free error. blk_revalidate_disk_zones() will only ever be called when initially setting up the zone append emulation resources, such as when setting up a zoned dm-crypt table for the first time. Further table swaps will not set md->zone_revalidate_map or call blk_revalidate_disk_zones(). However it must be called using the new table (referenced by md->zone_revalidate_map) and the new queue limits while the DM device is suspended. dm_blk_report_zones() needs some way to distinguish between a call from blk_revalidate_disk_zones(), which must be allowed to use md->zone_revalidate_map to access this not yet activated table, and all other calls to dm_blk_report_zones(), which should not be allowed while the device is suspended and cannot use md->zone_revalidate_map, since the zone resources might be freed by the process currently calling blk_revalidate_disk_zones(). Solve this by tracking the process that sets md->zone_revalidate_map in dm_revalidate_zones() and only allowing that process to make use of it in dm_blk_report_zones().

In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid data corruption caused by decline We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mpls: Fix warning during failed attribute validation The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix slab-use-after-free in decode_session6 When the xfrm device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when the xfrm device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff8881111458ef by task swapper/3/0 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 xfrmi_xmit+0x173/0x1ca0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:intel_idle_hlt+0x23/0x30 Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4 RSP: 0018:ffffc90000197d78 EFLAGS: 00000246 RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5 RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50 RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter_state+0xd3/0x6f0 cpuidle_enter+0x4e/0xa0 do_idle+0x2fe/0x3c0 cpu_startup_entry+0x18/0x20 start_secondary+0x200/0x290 secondary_startup_64_no_verify+0x167/0x16b </TASK> Allocated by task 939: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 inet6_ifa_notify+0x118/0x230 __ipv6_ifa_notify+0x177/0xbe0 addrconf_dad_completed+0x133/0xe00 addrconf_dad_work+0x764/0x1390 process_one_work+0xa32/0x16f0 worker_thread+0x67d/0x10c0 kthread+0x344/0x440 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888111145800 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 239 bytes inside of freed 640-byte region [ffff888111145800, ffff888111145a80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: net: fix UaF in netns ops registration error path If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel.

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Don't balance task to its current running CPU We've run into the case that the balancer tries to balance a migration disabled task and trigger the warning in set_task_cpu() like below: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240 Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip> CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021 pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : set_task_cpu+0x188/0x240 lr : load_balance+0x5d0/0xc60 sp : ffff80000803bc70 x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040 x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001 x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78 x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000 x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000 x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530 x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001 Call trace: set_task_cpu+0x188/0x240 load_balance+0x5d0/0xc60 rebalance_domains+0x26c/0x380 _nohz_idle_balance.isra.0+0x1e0/0x370 run_rebalance_domains+0x6c/0x80 __do_softirq+0x128/0x3d8 ____do_softirq+0x18/0x24 call_on_irq_stack+0x2c/0x38 do_softirq_own_stack+0x24/0x3c __irq_exit_rcu+0xcc/0xf4 irq_exit_rcu+0x18/0x24 el1_interrupt+0x4c/0xe4 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x74/0x78 arch_cpu_idle+0x18/0x4c default_idle_call+0x58/0x194 do_idle+0x244/0x2b0 cpu_startup_entry+0x30/0x3c secondary_start_kernel+0x14c/0x190 __secondary_switched+0xb0/0xb4 ---[ end trace 0000000000000000 ]--- Further investigation shows that the warning is superfluous, the migration disabled task is just going to be migrated to its current running CPU. This is because that on load balance if the dst_cpu is not allowed by the task, we'll re-select a new_dst_cpu as a candidate. If no task can be balanced to dst_cpu we'll try to balance the task to the new_dst_cpu instead. In this case when the migration disabled task is not on CPU it only allows to run on its current CPU, load balance will select its current CPU as new_dst_cpu and later triggers the warning above. The new_dst_cpu is chosen from the env->dst_grpmask. Currently it contains CPUs in sched_group_span() and if we have overlapped groups it's possible to run into this case. This patch makes env->dst_grpmask of group_balance_mask() which exclude any CPUs from the busiest group and solve the issue. For balancing in a domain with no overlapped groups the behaviour keeps same as before.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). Previously, nilfs_evict_inode() could cause use-after-free read for nilfs_root if inodes are left in "garbage_list" and released by nilfs_dispose_list at the end of nilfs_detach_log_writer(), and this bug was fixed by commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()"). However, it turned out that there is another possibility of UAF in the call path where mark_inode_dirty_sync() is called from iput(): nilfs_detach_log_writer() nilfs_dispose_list() iput() mark_inode_dirty_sync() __mark_inode_dirty() nilfs_dirty_inode() __nilfs_mark_inode_dirty() nilfs_load_inode_block() --> causes UAF of nilfs_root struct This can happen after commit 0ae45f63d4ef ("vfs: add support for a lazytime mount option"), which changed iput() to call mark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIME flag and i_nlink is non-zero. This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirty data after degenerating to read-only") when using the syzbot reproducer, but the issue has potentially existed before. Fix this issue by adding a "purging flag" to the nilfs structure, setting that flag while disposing the "garbage_list" and checking it in __nilfs_mark_inode_dirty(). Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()"), this patch does not rely on ns_writer to determine whether to skip operations, so as not to break recovery on mount. The nilfs_salvage_orphan_logs routine dirties the buffer of salvaged data before attaching the log writer, so changing __nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULL will cause recovery write to fail. The purpose of using the cleanup-only flag is to allow for narrowing of such conditions.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add length check in indx_get_root This adds a length check to guarantee the retrieved index root is legit. [ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320 [ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243 [ 162.460851] [ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42 [ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 162.462609] Call Trace: [ 162.462954] <TASK> [ 162.463276] dump_stack_lvl+0x49/0x63 [ 162.463822] print_report.cold+0xf5/0x689 [ 162.464608] ? unwind_get_return_address+0x3a/0x60 [ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.466975] kasan_report+0xa7/0x130 [ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0 [ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.468536] __asan_load2+0x68/0x90 [ 162.468923] hdr_find_e.isra.0+0x10c/0x320 [ 162.469282] ? cmp_uints+0xe0/0xe0 [ 162.469557] ? cmp_sdh+0x90/0x90 [ 162.469864] ? ni_find_attr+0x214/0x300 [ 162.470217] ? ni_load_mi+0x80/0x80 [ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.470931] ? ntfs_bread_run+0x190/0x190 [ 162.471307] ? indx_get_root+0xe4/0x190 [ 162.471556] ? indx_get_root+0x140/0x190 [ 162.471833] ? indx_init+0x1e0/0x1e0 [ 162.472069] ? fnd_clear+0x115/0x140 [ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100 [ 162.472731] indx_find+0x184/0x470 [ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 162.474429] ? indx_find_buffer+0x2d0/0x2d0 [ 162.474704] ? do_syscall_64+0x3b/0x90 [ 162.474962] dir_search_u+0x196/0x2f0 [ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450 [ 162.475661] ? ntfs_security_init+0x3d6/0x440 [ 162.475906] ? is_sd_valid+0x180/0x180 [ 162.476191] ntfs_extend_init+0x13f/0x2c0 [ 162.476496] ? ntfs_fix_post_read+0x130/0x130 [ 162.476861] ? iput.part.0+0x286/0x320 [ 162.477325] ntfs_fill_super+0x11e0/0x1b50 [ 162.477709] ? put_ntfs+0x1d0/0x1d0 [ 162.477970] ? vsprintf+0x20/0x20 [ 162.478258] ? set_blocksize+0x95/0x150 [ 162.478538] get_tree_bdev+0x232/0x370 [ 162.478789] ? put_ntfs+0x1d0/0x1d0 [ 162.479038] ntfs_fs_get_tree+0x15/0x20 [ 162.479374] vfs_get_tree+0x4c/0x130 [ 162.479729] path_mount+0x654/0xfe0 [ 162.480124] ? putname+0x80/0xa0 [ 162.480484] ? finish_automount+0x2e0/0x2e0 [ 162.480894] ? putname+0x80/0xa0 [ 162.481467] ? kmem_cache_free+0x1c4/0x440 [ 162.482280] ? putname+0x80/0xa0 [ 162.482714] do_mount+0xd6/0xf0 [ 162.483264] ? path_mount+0xfe0/0xfe0 [ 162.484782] ? __kasan_check_write+0x14/0x20 [ 162.485593] __x64_sys_mount+0xca/0x110 [ 162.486024] do_syscall_64+0x3b/0x90 [ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.487141] RIP: 0033:0x7f9d374e948a [ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a [ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0 [ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020 [ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0 [ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff [ 162.493644] </TASK> [ 162.493908] [ 162.494214] The buggy address belongs to the physical page: [ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc [ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000 [ 162.498928] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 162.500542] page dumped becau ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix ->anon_vma race If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains). If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)". It can also lead to use-after-free access.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Sync IRQ works before buffer destruction If something was written to the buffer just before destruction, it may be possible (maybe not in a real system, but it did happen in ARCH=um with time-travel) to destroy the ringbuffer before the IRQ work ran, leading this KASAN report (or a crash without KASAN): BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a Read of size 8 at addr 000000006d640a48 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.3.0-rc1 #7 Stack: 60c4f20f 0c203d48 41b58ab3 60f224fc 600477fa 60f35687 60c4f20f 601273dd 00000008 6101eb00 6101eab0 615be548 Call Trace: [<60047a58>] show_stack+0x25e/0x282 [<60c609e0>] dump_stack_lvl+0x96/0xfd [<60c50d4c>] print_report+0x1a7/0x5a8 [<603078d3>] kasan_report+0xc1/0xe9 [<60308950>] __asan_report_load8_noabort+0x1b/0x1d [<60232844>] irq_work_run_list+0x11a/0x13a [<602328b4>] irq_work_tick+0x24/0x34 [<6017f9dc>] update_process_times+0x162/0x196 [<6019f335>] tick_sched_handle+0x1a4/0x1c3 [<6019fd9e>] tick_sched_timer+0x79/0x10c [<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695 [<60182913>] hrtimer_interrupt+0x16c/0x2c4 [<600486a3>] um_timer+0x164/0x183 [...] Allocated by task 411: save_stack_trace+0x99/0xb5 stack_trace_save+0x81/0x9b kasan_save_stack+0x2d/0x54 kasan_set_track+0x34/0x3e kasan_save_alloc_info+0x25/0x28 ____kasan_kmalloc+0x8b/0x97 __kasan_kmalloc+0x10/0x12 __kmalloc+0xb2/0xe8 load_elf_phdrs+0xee/0x182 [...] The buggy address belongs to the object at 000000006d640800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 584 bytes inside of freed 1024-byte region [000000006d640800, 000000006d640c00) Add the appropriate irq_work_sync() so the work finishes before the buffers are destroyed. Prior to the commit in the Fixes tag below, there was only a single global IRQ work, so this issue didn't exist.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert. So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq should be executed under such condition, otherwise, an amdgpu_irq_put calltrace will occur. [ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246 [ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000 [ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000 [ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006 [ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050 [ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.170986] Call Trace: [ 7283.170988] <TASK> [ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu] [ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.173412] pci_pm_freeze+0x54/0xc0 [ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10 [ 7283.173425] dpm_run_callback+0x98/0x200 [ 7283.173430] __device_suspend+0x164/0x5f0 v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking)

In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas_flash: allow user copy to flash block cache objects With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the /proc/powerpc/rtas/firmware_update interface to prepare a system firmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4 The blocks of the firmware image are copied directly from user memory to objects allocated from flash_block_cache, so flash_block_cache must be created using kmem_cache_create_usercopy() to mark it safe for user access. [mpe: Trim and indent oops]

In the Linux kernel, the following vulnerability has been resolved: class: fix use-after-free in class_register() The lock_class_key is still registered and can be found in lock_keys_hash hlist after subsys_private is freed in error handler path.A task who iterate over the lock_keys_hash later may cause use-after-free.So fix that up and unregister the lock_class_key before kfree(cp). On our platform, a driver fails to kset_register because of creating duplicate filename '/class/xxx'.With Kasan enabled, it prints a invalid-access bug report. KASAN bug report: BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252 Pointer tag: [15], memory tag: [fe] CPU: 7 PID: 252 Comm: modprobe Tainted: G W 6.6.0-mainline-maybe-dirty #1 Call trace: dump_backtrace+0x1b0/0x1e4 show_stack+0x2c/0x40 dump_stack_lvl+0xac/0xe0 print_report+0x18c/0x4d8 kasan_report+0xe8/0x148 __hwasan_store8_noabort+0x88/0x98 lockdep_register_key+0x19c/0x1bc class_register+0x94/0x1ec init_module+0xbc/0xf48 [rfkill] do_one_initcall+0x17c/0x72c do_init_module+0x19c/0x3f8 ... Memory state around the buggy address: ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe >ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe ^ ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access not use-after-free here.In this case, modprobe is manipulating the corrupted lock_keys_hash hlish where lock_class_key is already freed before. It's worth noting that this only can happen if lockdep is enabled, which is not true for normal system.

In the Linux kernel, the following vulnerability has been resolved: drivers/amd/pm: fix a use-after-free in kv_parse_power_table When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a potential double-free in fs_any_create_groups When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups().

In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid format-overflow warning With gcc and W=1 option, there's a warning like this: fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’: fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between 1 and 7 bytes into a region of size between 5 and 8 [-Werror=format-overflow=] 1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev), MINOR(dev)); | ^~ String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35". slab_name's size should be 35 rather than 32.

In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in shinker's callback The mmap read lock is used during the shrinker's callback, which means that using alloc->vma pointer isn't safe as it can race with munmap(). As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") the mmap lock is downgraded after the vma has been isolated. I was able to reproduce this issue by manually adding some delays and triggering page reclaiming through the shrinker's debug sysfs. The following KASAN report confirms the UAF: ================================================================== BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8 Read of size 8 at addr ffff356ed50e50f0 by task bash/478 CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70 Hardware name: linux,dummy-virt (DT) Call trace: zap_page_range_single+0x470/0x4b8 binder_alloc_free_page+0x608/0xadc __list_lru_walk_one+0x130/0x3b0 list_lru_walk_node+0xc4/0x22c binder_shrink_scan+0x108/0x1dc shrinker_debugfs_scan_write+0x2b4/0x500 full_proxy_write+0xd4/0x140 vfs_write+0x1ac/0x758 ksys_write+0xf0/0x1dc __arm64_sys_write+0x6c/0x9c Allocated by task 492: kmem_cache_alloc+0x130/0x368 vm_area_alloc+0x2c/0x190 mmap_region+0x258/0x18bc do_mmap+0x694/0xa60 vm_mmap_pgoff+0x170/0x29c ksys_mmap_pgoff+0x290/0x3a0 __arm64_sys_mmap+0xcc/0x144 Freed by task 491: kmem_cache_free+0x17c/0x3c8 vm_area_free_rcu_cb+0x74/0x98 rcu_core+0xa38/0x26d4 rcu_core_si+0x10/0x1c __do_softirq+0x2fc/0xd24 Last potentially related work creation: __call_rcu_common.constprop.0+0x6c/0xba0 call_rcu+0x10/0x1c vm_area_free+0x18/0x24 remove_vma+0xe4/0x118 do_vmi_align_munmap.isra.0+0x718/0xb5c do_vmi_munmap+0xdc/0x1fc __vm_munmap+0x10c/0x278 __arm64_sys_munmap+0x58/0x7c Fix this issue by performing instead a vma_lookup() which will fail to find the vma that was isolated before the mmap lock downgrade. Note that this option has better performance than upgrading to a mmap write lock which would increase contention. Plus, mmap_write_trylock() has been recently removed anyway.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup.

In the Linux kernel, the following vulnerability has been resolved: mctp: perform route lookups under a RCU read-side lock Our current route lookups (mctp_route_lookup and mctp_route_lookup_null) traverse the net's route list without the RCU read lock held. This means the route lookup is subject to preemption, resulting in an potential grace period expiry, and so an eventual kfree() while we still have the route pointer. Add the proper read-side critical section locks around the route lookups, preventing premption and a possible parallel kfree. The remaining net->mctp.routes accesses are already under a rcu_read_lock, or protected by the RTNL for updates. Based on an analysis from Sili Luo <rootlab@huawei.com>, where introducing a delay in the route lookup could cause a UAF on simultaneous sendmsg() and route deletion.

In the Linux kernel, the following vulnerability has been resolved: iommu: Don't reserve 0-length IOVA region When the bootloader/firmware doesn't setup the framebuffers, their address and size are 0 in "iommu-addresses" property. If IOVA region is reserved with 0 length, then it ends up corrupting the IOVA rbtree with an entry which has pfn_hi < pfn_lo. If we intend to use display driver in kernel without framebuffer then it's causing the display IOMMU mappings to fail as entire valid IOVA space is reserved when address and length are passed as 0. An ideal solution would be firmware removing the "iommu-addresses" property and corresponding "memory-region" if display is not present. But the kernel should be able to handle this by checking for size of IOVA region and skipping the IOVA reservation if size is 0. Also, add a warning if firmware is requesting 0-length IOVA region reservation.

In the Linux kernel, the following vulnerability has been resolved: media: rc: bpf attach/detach requires write permission Note that bpf attach/detach also requires CAP_NET_ADMIN.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before executing GPINT commands [Why] DMCUB can be in idle when we attempt to interface with the HW through the GPINT mailbox resulting in a system hang. [How] Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep sequence. If the GPINT executes successfully then DMCUB will be put back into sleep after the optional response is returned. It functions similar to the inbox command interface.

In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.

In the Linux kernel, the following vulnerability has been resolved: reiserfs: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change reiserfs rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir && !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the ".." link. And cross-directory rename does move the source to new parent, even if you'd been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update ".." link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --> Bad inode number[0x4] for '..', parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail]

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix invalid page access after closing deferred I/O devices When a fbdev with deferred I/O is once opened and closed, the dirty pages still remain queued in the pageref list, and eventually later those may be processed in the delayed work. This may lead to a corruption of pages, hitting an Oops. This patch makes sure to cancel the delayed work and clean up the pageref list at closing the device for addressing the bug. A part of the cleanup code is factored out as a new helper function that is called from the common fb_release().

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix the error handler of rfkill config When the core rfkill config throws error, it should free the allocated resources. Currently it is not freeing the core pdev create resources. Avoid this issue by calling the core pdev destroy in the error handler of core rfkill config. Found this issue in the code review and it is compile tested only.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381

In the Linux kernel, the following vulnerability has been resolved: net: nfc: llcp: Add lock when modifying device list The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered.

In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013 do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was able to produce value less than -1 which cause the error. This patch simply add the change for the values less than 0. The patch is tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a double-free in si_dpm_init When the allocation of adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails, amdgpu_free_extended_power_table is called to free some fields of adev. However, when the control flow returns to si_dpm_sw_init, it goes to label dpm_failed and calls si_dpm_fini, which calls amdgpu_free_extended_power_table again and free those fields again. Thus a double-free is triggered.

In the Linux kernel, the following vulnerability has been resolved: FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6 index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]') CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> ================================================================================ Kernel panic - not syncing: UBSAN: panic_on_warn set ... CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 panic+0x30f/0x770 kernel/panic.c:340 check_panic_on_warn+0x82/0xa0 kernel/panic.c:236 ubsan_epilogue lib/ubsan.c:223 [inline] __ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> Kernel Offset: disabled Rebooting in 86400 seconds.. The issue is caused when the value of lp becomes greater than CTLTREESIZE which is the max size of stree. Adding a simple check solves this issue. Dave: As the function returns a void, good error handling would require a more intrusive code reorganization, so I modified Osama's patch at use WARN_ON_ONCE for lack of a cleaner option. The patch is tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diNewExt [Syz report] UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2 index -878706688 is out of range for type 'struct iagctl[128]' CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360 diAllocExt fs/jfs/jfs_imap.c:1949 [inline] diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666 diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225 vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106 do_mkdirat+0x264/0x3a0 fs/namei.c:4129 __do_sys_mkdir fs/namei.c:4149 [inline] __se_sys_mkdir fs/namei.c:4147 [inline] __x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fcb7e6a0b57 Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd83023038 EFLAGS: 00000286 ORIG_RAX: 0000000000000053 RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fcb7e6a0b57 RDX: 00000000000a1020 RSI: 00000000000001ff RDI: 0000000020000140 RBP: 0000000020000140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000286 R12: 00007ffd830230d0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [Analysis] When the agstart is too large, it can cause agno overflow. [Fix] After obtaining agno, if the value is invalid, exit the subsequent process. Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next report by kernel test robot (Dan Carpenter).

In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ]

In the Linux kernel, the following vulnerability has been resolved: f2fs: explicitly null-terminate the xattr list When setting an xattr, explicitly null-terminate the xattr list. This eliminates the fragile assumption that the unused xattr space is always zeroed.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix use-after-free in rdata->read_into_pages() When the network status is unstable, use-after-free may occur when read data from the server. BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0 Call Trace: <TASK> dump_stack_lvl+0x38/0x4c print_report+0x16f/0x4a6 kasan_report+0xb7/0x130 readpages_fill_pages+0x14c/0x7e0 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 </TASK> Allocated by task 2535: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x82/0x90 cifs_readdata_direct_alloc+0x2c/0x110 cifs_readdata_alloc+0x2d/0x60 cifs_readahead+0x393/0xfe0 read_pages+0x12f/0x470 page_cache_ra_unbounded+0x1b1/0x240 filemap_get_pages+0x1c8/0x9a0 filemap_read+0x1c0/0x540 cifs_strict_readv+0x21b/0x240 vfs_read+0x395/0x4b0 ksys_read+0xb8/0x150 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 79: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 __kmem_cache_free+0x7a/0x1a0 cifs_readdata_release+0x49/0x60 process_one_work+0x46c/0x760 worker_thread+0x2a4/0x6f0 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 Last potentially related work creation: kasan_save_stack+0x22/0x50 __kasan_record_aux_stack+0x95/0xb0 insert_work+0x2b/0x130 __queue_work+0x1fe/0x660 queue_work_on+0x4b/0x60 smb2_readv_callback+0x396/0x800 cifs_abort_connection+0x474/0x6a0 cifs_reconnect+0x5cb/0xa50 cifs_readv_from_socket.cold+0x22/0x6c cifs_read_page_from_socket+0xc1/0x100 readpages_fill_pages.cold+0x2f/0x46 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 The following function calls will cause UAF of the rdata pointer. readpages_fill_pages cifs_read_page_from_socket cifs_readv_from_socket cifs_reconnect __cifs_reconnect cifs_abort_connection mid->callback() --> smb2_readv_callback queue_work(&rdata->work) # if the worker completes first, # the rdata is freed cifs_readv_complete kref_put cifs_readdata_release kfree(rdata) return rdata->... # UAF in readpages_fill_pages() Similarly, this problem also occurs in the uncache_fill_pages(). Fix this by adjusts the order of condition judgment in the return statement.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt

In the Linux kernel, the following vulnerability has been resolved: of: Fix double free in of_parse_phandle_with_args_map In of_parse_phandle_with_args_map() the inner loop that iterates through the map entries calls of_node_put(new) to free the reference acquired by the previous iteration of the inner loop. This assumes that the value of "new" is NULL on the first iteration of the inner loop. Make sure that this is true in all iterations of the outer loop by setting "new" to NULL after its value is assigned to "cur". Extend the unittest to detect the double free and add an additional test case that actually triggers this path.

In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Fix buffer overflow in trans_stat_show Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error.