In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path The commit mutex should not be released during the critical section between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC worker could collect expired objects and get the released commit lock within the same GC sequence. nf_tables_module_autoload() temporarily releases the mutex to load module dependencies, then it goes back to replay the transaction again. Move it at the end of the abort phase after nft_gc_seq_end() is called.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: release elements in clone only from destroy path Clone already always provides a current view of the lookup table, use it to destroy the set, otherwise it is possible to destroy elements twice. This fix requires: 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol") which came after: 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path").

In the Linux kernel, the following vulnerability has been resolved: l2tp: pass correct message length to ip6_append_data l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent.

In the Linux kernel, the following vulnerability has been resolved: netfs, fscache: Prevent Oops in fscache_put_cache() This function dereferences "cache" and then checks if it's IS_ERR_OR_NULL(). Check first, then dereference.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device.

In the Linux kernel, the following vulnerability has been resolved: Revert "kobject: Remove redundant checks for whether ktype is NULL" This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31. It is reported to cause problems, so revert it for now until the root cause can be found.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix a memleak in init_credit_return When dma_alloc_coherent fails to allocate dd->cr_base[i].va, init_credit_return should deallocate dd->cr_base and dd->cr_base[i] that allocated before. Or those resources would be never freed and a memleak is triggered.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix delayed ACKs to not set the reference serial number Fix the construction of delayed ACKs to not set the reference serial number as they can't be used as an RTT reference.

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd: flush any delayed gfxoff on suspend entry" commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") caused GFXOFF control to be used more heavily and the codepath that was removed from commit 0dee72639533 ("drm/amd: flush any delayed gfxoff on suspend entry") now can be exercised at suspend again. Users report that by using GNOME to suspend the lockscreen trigger will cause SDMA traffic and the system can deadlock. This reverts commit 0dee726395333fea833eaaf838bc80962df886c8.

In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: Add protection for bmp length out of range UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts that are out of bounds for their data type. vmlinux get_bitmap(b=75) + 712 <net/netfilter/nf_conntrack_h323_asn1.c:0> vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956 <net/netfilter/nf_conntrack_h323_asn1.c:592> vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812 <net/netfilter/nf_conntrack_h323_asn1.c:576> vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux DecodeRasMessage() + 304 <net/netfilter/nf_conntrack_h323_asn1.c:833> vmlinux ras_help() + 684 <net/netfilter/nf_conntrack_h323_main.c:1728> vmlinux nf_confirm() + 188 <net/netfilter/nf_conntrack_proto.c:137> Due to abnormal data in skb->data, the extension bitmap length exceeds 32 when decoding ras message then uses the length to make a shift operation. It will change into negative after several loop. UBSAN load could detect a negative shift as an undefined behaviour and reports exception. So we add the protection to avoid the length exceeding 32. Or else it will return out of range error and stop decoding.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Add TMF to tmr_list handling An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core. Unable to locate ITT: 0x05000000 on CID: 0 Unable to locate RefTaskTag: 0x05000000 on CID: 0. wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop ... INFO: task kworker/0:2:49 blocked for more than 491 seconds. task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800 Workqueue: events target_tmr_work [target_core_mod] Call Trace: __switch_to+0x2c4/0x470 _schedule+0x314/0x1730 schedule+0x64/0x130 schedule_timeout+0x168/0x430 wait_for_completion+0x140/0x270 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod] core_tmr_lun_reset+0x30/0xa0 [target_core_mod] target_tmr_work+0xc8/0x1b0 [target_core_mod] process_one_work+0x2d4/0x5d0 worker_thread+0x78/0x6c0 To fix this, only add abort to tmr_list if it will be handled by target core.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4130: zero-initialize clock init data The clk_init_data struct does not have all its members initialized, causing issues when trying to expose the internal clock on the CLK pin. Fix this by zero-initializing the clk_init_data struct.

In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the "hash_list" entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the "resume" and "postsuspend" methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ? __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: veth: clear GRO when clearing XDP even when down veth sets NETIF_F_GRO automatically when XDP is enabled, because both features use the same NAPI machinery. The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which is called both on ndo_stop and when XDP is turned off. To avoid the flag from being cleared when the device is brought down, the clearing is skipped when IFF_UP is not set. Bringing the device down should indeed not modify its features. Unfortunately, this means that clearing is also skipped when XDP is disabled _while_ the device is down. And there's nothing on the open path to bring the device features back into sync. IOW if user enables XDP, disables it and then brings the device up we'll end up with a stray GRO flag set but no NAPI instances. We don't depend on the GRO flag on the datapath, so the datapath won't crash. We will crash (or hang), however, next time features are sync'ed (either by user via ethtool or peer changing its config). The GRO flag will go away, and veth will try to disable the NAPIs. But the open path never created them since XDP was off, the GRO flag was a stray. If NAPI was initialized before we'll hang in napi_disable(). If it never was we'll crash trying to stop uninitialized hrtimer. Move the GRO flag updates to the XDP enable / disable paths, instead of mixing them with the ndo_open / ndo_close paths.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not ASSERT() if the newly created subvolume already got read [BUG] There is a syzbot crash, triggered by the ASSERT() during subvolume creation: assertion failed: !anon_dev, in fs/btrfs/disk-io.c:1319 ------------[ cut here ]------------ kernel BUG at fs/btrfs/disk-io.c:1319! invalid opcode: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:btrfs_get_root_ref.part.0+0x9aa/0xa60 <TASK> btrfs_get_new_fs_root+0xd3/0xf0 create_subvol+0xd02/0x1650 btrfs_mksubvol+0xe95/0x12b0 __btrfs_ioctl_snap_create+0x2f9/0x4f0 btrfs_ioctl_snap_create+0x16b/0x200 btrfs_ioctl+0x35f0/0x5cf0 __x64_sys_ioctl+0x19d/0x210 do_syscall_64+0x3f/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace 0000000000000000 ]--- [CAUSE] During create_subvol(), after inserting root item for the newly created subvolume, we would trigger btrfs_get_new_fs_root() to get the btrfs_root of that subvolume. The idea here is, we have preallocated an anonymous device number for the subvolume, thus we can assign it to the new subvolume. But there is really nothing preventing things like backref walk to read the new subvolume. If that happens before we call btrfs_get_new_fs_root(), the subvolume would be read out, with a new anonymous device number assigned already. In that case, we would trigger ASSERT(), as we really expect no one to read out that subvolume (which is not yet accessible from the fs). But things like backref walk is still possible to trigger the read on the subvolume. Thus our assumption on the ASSERT() is not correct in the first place. [FIX] Fix it by removing the ASSERT(), and just free the @anon_dev, reset it to 0, and continue. If the subvolume tree is read out by something else, it should have already get a new anon_dev assigned thus we only need to free the preallocated one.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: reset dst in route object after setting up flow dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix double free in SMC transport cleanup path When the generic SCMI code tears down a channel, it calls the chan_free callback function, defined by each transport. Since multiple protocols might share the same transport_info member, chan_free() might want to clean up the same member multiple times within the given SCMI transport implementation. In this case, it is SMC transport. This will lead to a NULL pointer dereference at the second time: | scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16 | arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. | arm-scmi firmware:scmi: unable to communicate with SCMI | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: | CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793 | Hardware name: FVP Base RevC (DT) | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : smc_chan_free+0x3c/0x6c | lr : smc_chan_free+0x3c/0x6c | Call trace: | smc_chan_free+0x3c/0x6c | idr_for_each+0x68/0xf8 | scmi_cleanup_channels.isra.0+0x2c/0x58 | scmi_probe+0x434/0x734 | platform_probe+0x68/0xd8 | really_probe+0x110/0x27c | __driver_probe_device+0x78/0x12c | driver_probe_device+0x3c/0x118 | __driver_attach+0x74/0x128 | bus_for_each_dev+0x78/0xe0 | driver_attach+0x24/0x30 | bus_add_driver+0xe4/0x1e8 | driver_register+0x60/0x128 | __platform_driver_register+0x28/0x34 | scmi_driver_init+0x84/0xc0 | do_one_initcall+0x78/0x33c | kernel_init_freeable+0x2b8/0x51c | kernel_init+0x24/0x130 | ret_from_fork+0x10/0x20 | Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280) | ---[ end trace 0000000000000000 ]--- Simply check for the struct pointer being NULL before trying to access its members, to avoid this situation. This was found when a transport doesn't really work (for instance no SMC service), the probe routines then tries to clean up, and triggers a crash.

In the Linux kernel, the following vulnerability has been resolved: dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished(). syzkaller reported a warning [0] in inet_csk_destroy_sock() with no repro. WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash); However, the syzkaller's log hinted that connect() failed just before the warning due to FAULT_INJECTION. [1] When connect() is called for an unbound socket, we search for an available ephemeral port. If a bhash bucket exists for the port, we call __inet_check_established() or __inet6_check_established() to check if the bucket is reusable. If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num. Later, we look up the corresponding bhash2 bucket and try to allocate it if it does not exist. Although it rarely occurs in real use, if the allocation fails, we must revert the changes by check_established(). Otherwise, an unconnected socket could illegally occupy an ehash entry. Note that we do not put tw back into ehash because sk might have already responded to a packet for tw and it would be better to free tw earlier under such memory presure. [0]: WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Modules linked in: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05 RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40 RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8 RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0 R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000 FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) dccp_close (net/dccp/proto.c:1078) inet_release (net/ipv4/af_inet.c:434) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:377) __fput_sync (fs/file_table.c:462) __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e53852bb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44 RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000 R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170 </TASK> [1]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3748) kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867) inet_bind2_bucket_create ---truncated---

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd. Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks.

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore read-only array in md_check_recovery() Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) array is read-only. dm-raid update super block: rs_update_sbs ro = mddev->ro mddev->ro = 0 -> set array read-write md_update_sb 2) register new sync thread concurrently. 3) dm-raid set array back to read-only: rs_update_sbs mddev->ro = ro 4) stop the array: raid_dtr md_stop stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 5) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 6) daemon thread can't unregister sync thread: md_check_recovery if (!md_is_rdwr(mddev) && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang; The root cause is that dm-raid manipulate 'mddev->ro' by itself, however, dm-raid really should stop sync thread before setting the array read-only. Unfortunately, I need to read more code before I can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix the problem the easy way for now to prevent dm-raid regression.

In the Linux kernel, the following vulnerability has been resolved: aoe: avoid potential deadlock at set_capacity Move set_capacity() outside of the section procected by (&d->lock). To avoid possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- [1] lock(&bdev->bd_size_lock); local_irq_disable(); [2] lock(&d->lock); [3] lock(&bdev->bd_size_lock); <Interrupt> [4] lock(&d->lock); *** DEADLOCK *** Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity(). [2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc() is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call. In this situation an attempt to acquire [4]lock(&d->lock) from aoecmd_cfg_rsp() will lead to deadlock. So the simplest solution is breaking lock dependency [2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity() outside.

In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Skip to handle RAS errors if CXL.mem device is detached The PCI AER model is an awkward fit for CXL error handling. While the expectation is that a PCI device can escalate to link reset to recover from an AER event, the same reset on CXL amounts to a surprise memory hotplug of massive amounts of memory. At present, the CXL error handler attempts some optimistic error handling to unbind the device from the cxl_mem driver after reaping some RAS register values. This results in a "hopeful" attempt to unplug the memory, but there is no guarantee that will succeed. A subsequent AER notification after the memdev unbind event can no longer assume the registers are mapped. Check for memdev bind before reaping status register values to avoid crashes of the form: BUG: unable to handle page fault for address: ffa00000195e9100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core] [...] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x160 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x113/0x170 ? asm_exc_page_fault+0x26/0x30 ? __pfx_dpc_reset_link+0x10/0x10 ? __cxl_handle_ras+0x30/0x110 [cxl_core] ? find_cxl_port+0x59/0x80 [cxl_core] cxl_handle_rp_ras+0xbc/0xd0 [cxl_core] cxl_error_detected+0x6c/0xf0 [cxl_core] report_error_detected+0xc7/0x1c0 pci_walk_bus+0x73/0x90 pcie_do_recovery+0x23f/0x330 Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might need to be replaced with a new PCI_ERS_RESULT_PANIC.

kernel/sched/fair.c in the Linux kernel before 5.3.9, when cpu.cfs_quota_us is used (e.g., with Kubernetes), allows attackers to cause a denial of service against non-cpu-bound applications by generating a workload that triggers unwanted slice expiration, aka CID-de53fd7aedb1. (In other words, although this slice expiration would typically be seen with benign workloads, it is possible that an attacker could calculate how many stray requests are required to force an entire Kubernetes cluster into a low-performance state caused by slice expiration, and ensure that a DDoS attack sent that number of stray requests. An attack does not affect the stability of the kernel; it only causes mismanagement of application execution.)

In the Linux kernel, the following vulnerability has been resolved: ovl: relax WARN_ON in ovl_verify_area() syzbot hit an assertion in copy up data loop which looks like it is the result of a lower file whose size is being changed underneath overlayfs. This type of use case is documented to cause undefined behavior, so returning EIO error for the copy up makes sense, but it should not be causing a WARN_ON assertion.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size validation could be skipped. if request size is smaller than sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in smb2_allocate_rsp_buf(). This patch allocate response buffer after decrypting transform request. smb3_decrypt_req() will validate transform request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf().

In the Linux kernel, the following vulnerability has been resolved: tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

In the Linux kernel, the following vulnerability has been resolved: libbpf: Use OPTS_SET() macro in bpf_xdp_query() When the feature_flags and xdp_zc_max_segs fields were added to the libbpf bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro. This causes libbpf to write to those fields unconditionally, which means that programs compiled against an older version of libbpf (with a smaller size of the bpf_xdp_query_opts struct) will have its stack corrupted by libbpf writing out of bounds. The patch adding the feature_flags field has an early bail out if the feature_flags field is not part of the opts struct (via the OPTS_HAS) macro, but the patch adding xdp_zc_max_segs does not. For consistency, this fix just changes the assignments to both fields to use the OPTS_SET() macro.

In the Linux kernel, the following vulnerability has been resolved: xen/evtchn: avoid WARN() when unbinding an event channel When unbinding a user event channel, the related handler might be called a last time in case the kernel was built with CONFIG_DEBUG_SHIRQ. This might cause a WARN() in the handler. Avoid that by adding an "unbinding" flag to struct user_event which will short circuit the handler.

In the Linux kernel, the following vulnerability has been resolved: ARM: ep93xx: Add terminator to gpiod_lookup_table Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops.

In the Linux kernel, the following vulnerability has been resolved: smb: Fix regression in writes when non-standard maximum write size negotiated The conversion to netfs in the 6.3 kernel caused a regression when maximum write size is set by the server to an unexpected value which is not a multiple of 4096 (similarly if the user overrides the maximum write size by setting mount parm "wsize", but sets it to a value that is not a multiple of 4096). When negotiated write size is not a multiple of 4096 the netfs code can skip the end of the final page when doing large sequential writes, causing data corruption. This section of code is being rewritten/removed due to a large netfs change, but until that point (ie for the 6.3 kernel until now) we can not support non-standard maximum write sizes. Add a warning if a user specifies a wsize on mount that is not a multiple of 4096 (and round down), also add a change where we round down the maximum write size if the server negotiates a value that is not a multiple of 4096 (we also have to check to make sure that we do not round it down to zero).

In the Linux kernel, the following vulnerability has been resolved: dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape For raid456, if reshape is still in progress, then IO across reshape position will wait for reshape to make progress. However, for dm-raid, in following cases reshape will never make progress hence IO will hang: 1) the array is read-only; 2) MD_RECOVERY_WAIT is set; 3) MD_RECOVERY_FROZEN is set; After commit c467e97f079f ("md/raid6: use valid sector values to determine if an I/O should wait on the reshape") fix the problem that IO across reshape position doesn't wait for reshape, the dm-raid test shell/lvconvert-raid-reshape.sh start to hang: [root@fedora ~]# cat /proc/979/stack [<0>] wait_woken+0x7d/0x90 [<0>] raid5_make_request+0x929/0x1d70 [raid456] [<0>] md_handle_request+0xc2/0x3b0 [md_mod] [<0>] raid_map+0x2c/0x50 [dm_raid] [<0>] __map_bio+0x251/0x380 [dm_mod] [<0>] dm_submit_bio+0x1f0/0x760 [dm_mod] [<0>] __submit_bio+0xc2/0x1c0 [<0>] submit_bio_noacct_nocheck+0x17f/0x450 [<0>] submit_bio_noacct+0x2bc/0x780 [<0>] submit_bio+0x70/0xc0 [<0>] mpage_readahead+0x169/0x1f0 [<0>] blkdev_readahead+0x18/0x30 [<0>] read_pages+0x7c/0x3b0 [<0>] page_cache_ra_unbounded+0x1ab/0x280 [<0>] force_page_cache_ra+0x9e/0x130 [<0>] page_cache_sync_ra+0x3b/0x110 [<0>] filemap_get_pages+0x143/0xa30 [<0>] filemap_read+0xdc/0x4b0 [<0>] blkdev_read_iter+0x75/0x200 [<0>] vfs_read+0x272/0x460 [<0>] ksys_read+0x7a/0x170 [<0>] __x64_sys_read+0x1c/0x30 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 This is because reshape can't make progress. For md/raid, the problem doesn't exist because register new sync_thread doesn't rely on the IO to be done any more: 1) If array is read-only, it can switch to read-write by ioctl/sysfs; 2) md/raid never set MD_RECOVERY_WAIT; 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold 'reconfig_mutex', hence it can be cleared and reshape can continue by sysfs api 'sync_action'. However, I'm not sure yet how to avoid the problem in dm-raid yet. This patch on the one hand make sure raid_message() can't change sync_thread() through raid_message() after presuspend(), on the other hand detect the above 3 cases before wait for IO do be done in dm_suspend(), and let dm-raid requeue those IO.

In the Linux kernel, the following vulnerability has been resolved: block: Fix WARNING in _copy_from_iter Syzkaller reports a warning in _copy_from_iter because an iov_iter is supposedly used in the wrong direction. The reason is that syzcaller managed to generate a request with a transfer direction of SG_DXFER_TO_FROM_DEV. This instructs the kernel to copy user buffers into the kernel, read into the copied buffers and then copy the data back to user space. Thus the iovec is used in both directions. Detect this situation in the block layer and construct a new iterator with the correct direction for the copy-in.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't set the MFP flag for the GTK The firmware doesn't need the MFP flag for the GTK, it can even make the firmware crash. in case the AP is configured with: group cipher TKIP and MFPC. We would send the GTK with cipher = TKIP and MFP which is of course not possible.

In the Linux kernel, the following vulnerability has been resolved: clk: meson: Add missing clocks to axg_clk_regmaps Some clocks were missing from axg_clk_regmaps, which caused kernel panic during cat /sys/kernel/debug/clk/clk_summary [ 57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc ... [ 57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.436900] pc : regmap_read+0x1c/0x88 [ 57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.445611] sp : ffff800082f1b690 [ 57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70 [ 57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000 [ 57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000 [ 57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff [ 57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000 [ 57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100 [ 57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24 [ 57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710 [ 57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000 [ 57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000 [ 57.519615] Call trace: [ 57.522030] regmap_read+0x1c/0x88 [ 57.525393] clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.530050] clk_core_is_enabled+0x44/0x120 [ 57.534190] clk_summary_show_subtree+0x154/0x2f0 [ 57.538847] clk_summary_show_subtree+0x220/0x2f0 [ 57.543505] clk_summary_show_subtree+0x220/0x2f0 [ 57.548162] clk_summary_show_subtree+0x220/0x2f0 [ 57.552820] clk_summary_show_subtree+0x220/0x2f0 [ 57.557477] clk_summary_show_subtree+0x220/0x2f0 [ 57.562135] clk_summary_show_subtree+0x220/0x2f0 [ 57.566792] clk_summary_show_subtree+0x220/0x2f0 [ 57.571450] clk_summary_show+0x84/0xb8 [ 57.575245] seq_read_iter+0x1bc/0x4b8 [ 57.578954] seq_read+0x8c/0xd0 [ 57.582059] full_proxy_read+0x68/0xc8 [ 57.585767] vfs_read+0xb0/0x268 [ 57.588959] ksys_read+0x70/0x108 [ 57.592236] __arm64_sys_read+0x24/0x38 [ 57.596031] invoke_syscall+0x50/0x128 [ 57.599740] el0_svc_common.constprop.0+0x48/0xf8 [ 57.604397] do_el0_svc+0x28/0x40 [ 57.607675] el0_svc+0x34/0xb8 [ 57.610694] el0t_64_sync_handler+0x13c/0x158 [ 57.615006] el0t_64_sync+0x190/0x198 [ 57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00) [ 57.624668] ---[ end trace 0000000000000000 ]--- [jbrunet: add missing Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt The loop inside nfs_netfs_issue_read() currently does not disable interrupts while iterating through pages in the xarray to submit for NFS read. This is not safe though since after taking xa_lock, another page in the mapping could be processed for writeback inside an interrupt, and deadlock can occur. The fix is simple and clean if we use xa_for_each_range(), which handles the iteration with RCU while reducing code complexity. The problem is easily reproduced with the following test: mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/nfs/file1.bin of=/dev/null umount /mnt/nfs On the console with a lockdep-enabled kernel a message similar to the following will be seen: ================================ WARNING: inconsistent lock state 6.7.0-lockdbg+ #10 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at: nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x144/0x380 _raw_spin_lock_irqsave+0x4e/0xa0 __folio_end_writeback+0x17e/0x5c0 folio_end_writeback+0x93/0x1b0 iomap_finish_ioend+0xeb/0x6a0 blk_update_request+0x204/0x7f0 blk_mq_end_request+0x30/0x1c0 blk_complete_reqs+0x7e/0xa0 __do_softirq+0x113/0x544 __irq_exit_rcu+0xfe/0x120 irq_exit_rcu+0xe/0x20 sysvec_call_function_single+0x6f/0x90 asm_sysvec_call_function_single+0x1a/0x20 pv_native_safe_halt+0xf/0x20 default_idle+0x9/0x20 default_idle_call+0x67/0xa0 do_idle+0x2b5/0x300 cpu_startup_entry+0x34/0x40 start_secondary+0x19d/0x1c0 secondary_startup_64_no_verify+0x18f/0x19b irq event stamp: 176891 hardirqs last enabled at (176891): [<ffffffffa67a0be4>] _raw_spin_unlock_irqrestore+0x44/0x60 hardirqs last disabled at (176890): [<ffffffffa67a0899>] _raw_spin_lock_irqsave+0x79/0xa0 softirqs last enabled at (176646): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 softirqs last disabled at (176633): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#4); <Interrupt> lock(&xa->xa_lock#4); *** DEADLOCK *** 2 locks held by test5/1708: #0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at: nfs_start_io_read+0x28/0x90 [nfs] #1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at: page_cache_ra_unbounded+0xa4/0x280 stack backtrace: CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Call Trace: dump_stack_lvl+0x5b/0x90 mark_lock+0xb3f/0xd20 __lock_acquire+0x77b/0x3360 _raw_spin_lock+0x34/0x80 nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] netfs_begin_read+0x77f/0x980 [netfs] nfs_netfs_readahead+0x45/0x60 [nfs] nfs_readahead+0x323/0x5a0 [nfs] read_pages+0xf3/0x5c0 page_cache_ra_unbounded+0x1c8/0x280 filemap_get_pages+0x38c/0xae0 filemap_read+0x206/0x5e0 nfs_file_read+0xb7/0x140 [nfs] vfs_read+0x2a9/0x460 ksys_read+0xb7/0x140

In the Linux kernel, the following vulnerability has been resolved: inet: read sk->sk_family once in inet_recv_error() inet_recv_error() is called without holding the socket lock. IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM socket option and trigger a KCSAN warning.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL pointer dereference in tb_port_update_credits() Olliver reported that his system crashes when plugging in Thunderbolt 1 device: BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow anonymous set with timeout flag Anonymous sets are never used with timeout from userspace, reject this. Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: handle pmk_op allocation failure The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix NULL pointer dereference when get power limit Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL.

In the Linux kernel, the following vulnerability has been resolved: parisc: Fix random data corruption from exception handler The current exception handler implementation, which assists when accessing user space memory, may exhibit random data corruption if the compiler decides to use a different register than the specified register %r29 (defined in ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another register, the fault handler will nevertheless store -EFAULT into %r29 and thus trash whatever this register is used for. Looking at the assembly I found that this happens sometimes in emulate_ldd(). To solve the issue, the easiest solution would be if it somehow is possible to tell the fault handler which register is used to hold the error code. Using %0 or %1 in the inline assembly is not posssible as it will show up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not convert to an integer. This patch takes another, better and more flexible approach: We extend the __ex_table (which is out of the execution path) by one 32-word. In this word we tell the compiler to insert the assembler instruction "or %r0,%r0,%reg", where %reg references the register which the compiler choosed for the error return code. In case of an access failure, the fault handler finds the __ex_table entry and can examine the opcode. The used register is encoded in the lowest 5 bits, and the fault handler can then store -EFAULT into this register. Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT config option any longer.

In the Linux kernel, the following vulnerability has been resolved: net: implement lockless setsockopt(SO_PEEK_OFF) syzbot reported a lockdep violation [1] involving af_unix support of SO_PEEK_OFF. Since SO_PEEK_OFF is inherently not thread safe (it uses a per-socket sk_peek_off field), there is really no point to enforce a pointless thread safety in the kernel. After this patch : - setsockopt(SO_PEEK_OFF) no longer acquires the socket lock. - skb_consume_udp() no longer has to acquire the socket lock. - af_unix no longer needs a special version of sk_set_peek_off(), because it does not lock u->iolock anymore. As a followup, we could replace prot->set_peek_off to be a boolean and avoid an indirect call, since we always use sk_set_peek_off(). [1] WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Not tainted syz-executor.2/30025 is trying to acquire lock: ffff8880765e7d80 (&u->iolock){+.+.}-{3:3}, at: unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 but task is already holding lock: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_UNIX){+.+.}-{0:0}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_nested+0x48/0x100 net/core/sock.c:3524 lock_sock include/net/sock.h:1691 [inline] __unix_dgram_recvmsg+0x1275/0x12c0 net/unix/af_unix.c:2415 sock_recvmsg_nosec+0x18e/0x1d0 net/socket.c:1046 ____sys_recvmsg+0x3c0/0x470 net/socket.c:2801 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 -> #0 (&u->iolock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_UNIX); lock(&u->iolock); lock(sk_lock-AF_UNIX); lock(&u->iolock); *** DEADLOCK *** 1 lock held by syz-executor.2/30025: #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 stack backtrace: CPU: 0 PID: 30025 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Hardware name: Google Google C ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfs: fix panic when nfs4_ff_layout_prepare_ds() fails We've been seeing the following panic in production BUG: kernel NULL pointer dereference, address: 0000000000000065 PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0 RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] Call Trace: <TASK> ? __die+0x78/0xc0 ? page_fault_oops+0x286/0x380 ? __rpc_execute+0x2c3/0x470 [sunrpc] ? rpc_new_task+0x42/0x1c0 [sunrpc] ? exc_page_fault+0x5d/0x110 ? asm_exc_page_fault+0x22/0x30 ? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles] pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4] pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4] ? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles] nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles] ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles] __nfs_pageio_add_request+0x154/0x6c0 [nfs] nfs_pageio_add_request+0x26b/0x380 [nfs] nfs_do_writepage+0x111/0x1e0 [nfs] nfs_writepages_callback+0xf/0x30 [nfs] write_cache_pages+0x17f/0x380 ? nfs_pageio_init_write+0x50/0x50 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] nfs_writepages+0x125/0x210 [nfs] do_writepages+0x67/0x220 ? generic_perform_write+0x14b/0x210 filemap_fdatawrite_wbc+0x5b/0x80 file_write_and_wait_range+0x6d/0xc0 nfs_file_fsync+0x81/0x170 [nfs] ? nfs_file_mmap+0x60/0x60 [nfs] __x64_sys_fsync+0x53/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Inspecting the core with drgn I was able to pull this >>> prog.crashed_thread().stack_trace()[0] #0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27 >>> prog.crashed_thread().stack_trace()[0]['idx'] (u32)1 >>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds (struct nfs4_ff_layout_ds *)0xffffffffffffffed This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds() which could error out initializing the mirror_ds, and then we go to clean it all up and our check is only for if (!mirror->mirror_ds). This is inconsistent with the rest of the users of mirror_ds, which have if (IS_ERR_OR_NULL(mirror_ds)) to keep from tripping over this exact scenario. Fix this up in ff_layout_cancel_io() to make sure we don't panic when we get an error. I also spot checked all the other instances of checking mirror_ds and we appear to be doing the correct checks everywhere, only unconditionally dereferencing mirror_ds when we know it would be valid.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic verify_blkaddr() will trigger panic once we inject fault into f2fs_is_valid_blkaddr(), fix to remove this unnecessary f2fs_bug_on().

In the Linux kernel, the following vulnerability has been resolved: nbd: null check for nla_nest_start nla_nest_start() may fail and return NULL. Insert a check and set errno based on other call sites within the same source code.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: rely on mac80211 debugfs handling for vif mac80211 started to delete debugfs entries in certain cases, causing a ath11k to crash when it tried to delete the entries later. Fix this by relying on mac80211 to delete the entries when appropriate and adding them from the vif_add_debugfs handler.

In the Linux kernel, the following vulnerability has been resolved: pci_iounmap(): Fix MMIO mapping leak The #ifdef ARCH_HAS_GENERIC_IOPORT_MAP accidentally also guards iounmap(), which means MMIO mappings are leaked. Move the guard so we call iounmap() for MMIO mappings.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") defines a new macro to calculate the DSC PPS register addresses with PPS number as an input. This macro correctly calculates the addresses till PPS 11 since the addresses increment by 4. So in that case the following macro works correctly to give correct register address: _MMIO(_DSCA_PPS_0 + (pps) * 4) However after PPS 11, the register address for PPS 12 increments by 12 because of RC Buffer memory allocation in between. Because of this discontinuity in the address space, the macro calculates wrong addresses for PPS 12 - 16 resulting into incorrect DSC PPS parameter value read/writes causing DSC corruption. This fixes it by correcting this macro to add the offset of 12 for PPS >=12. v3: Add correct paranthesis for pps argument (Jani Nikula) (cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5)

mwifiex_tm_cmd in drivers/net/wireless/marvell/mwifiex/cfg80211.c in the Linux kernel before 5.1.6 has some error-handling cases that did not free allocated hostcmd memory, aka CID-003b686ace82. This will cause a memory leak and denial of service.