NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer (nvidia.ko), where an integer overflow may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: gpio: davinci: Validate the obtained number of IRQs Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken DT due to any error this value can be any. Without this value validation there can be out of chips->irqs array boundaries access in davinci_gpio_probe(). Validate the obtained nirq value so that it won't exceed the maximum number of IRQs per bank. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything for platform entries. This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe() in sound/soc/mediatek/common/mtk-soundcard-driver.c: for_each_card_prelinks(card, i, dai_link) { if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF"))) dai_link->platforms->of_node = adsp_node; else if (!dai_link->platforms->name && !dai_link->platforms->of_node) dai_link->platforms->of_node = platform_node; } where the code expects the platforms array to have space for at least one entry. Add an COMP_EMPTY() entry so that dai_link->platforms has space.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check index msg_id before read or write [WHAT] msg_id is used as an array index and it cannot be a negative value, and therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1). [HOW] Check whether msg_id is valid before reading and setting. This fixes 4 OVERRUN issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds.

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: Avoid address calculations via out of bounds array indexing Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning.

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Use variable length array instead of fixed size Should fix smatch warning: ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256)

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}'

In the Linux kernel, the following vulnerability has been resolved: iio: adc: PAC1934: fix accessing out of bounds array index Fix accessing out of bounds array index for average current and voltage measurements. The device itself has only 4 channels, but in sysfs there are "fake" channels for the average voltages and currents too.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential index out of bounds in color transformation function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: boundary check before installing cq callbacks Add a boundary check inside mana_ib_install_cq_cb to prevent index overflow.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: guard against invalid STA ID on removal Guard against invalid station IDs in iwl_mvm_mld_rm_sta_id as that would result in out-of-bounds array accesses. This prevents issues should the driver get into a bad state during error handling.

In the Linux kernel, the following vulnerability has been resolved: ice: fix locking for Tx timestamp tracking flush Commit 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") added a lock around the Tx timestamp tracker flow which is used to cleanup any left over SKBs and prepare for device removal. This lock is problematic because it is being held around a call to ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY write command to firmware. This could lead to a deadlock if the mutex actually sleeps, and causes the following warning on a kernel with preemption debugging enabled: [ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573 [ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod [ 715.435652] INFO: lockdep is turned off. [ 715.439591] Preemption disabled at: [ 715.439594] [<0000000000000000>] 0x0 [ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c [ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 715.468483] Call Trace: [ 715.470940] dump_stack_lvl+0x6a/0x9a [ 715.474613] ___might_sleep.cold+0x224/0x26a [ 715.478895] __mutex_lock+0xb3/0x1440 [ 715.482569] ? stack_depot_save+0x378/0x500 [ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.494979] ? kfree+0xc1/0x520 [ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0 [ 715.502837] ? kasan_set_free_info+0x20/0x30 [ 715.507110] ? __kasan_slab_free+0x10b/0x140 [ 715.511385] ? slab_free_freelist_hook+0xc7/0x220 [ 715.516092] ? kfree+0xc1/0x520 [ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.535133] ? pci_device_remove+0xab/0x1d0 [ 715.539318] ? __device_release_driver+0x35b/0x690 [ 715.544110] ? driver_detach+0x214/0x2f0 [ 715.548035] ? bus_remove_driver+0x11d/0x2f0 [ 715.552309] ? pci_unregister_driver+0x26/0x250 [ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.570554] ? do_syscall_64+0x3b/0x90 [ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.579529] ? start_flush_work+0x542/0x8f0 [ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.599960] ? wait_for_completion_io+0x250/0x250 [ 715.604662] ? lock_acquire+0x196/0x200 [ 715.608504] ? do_raw_spin_trylock+0xa5/0x160 [ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0 [ 715.633550] ? trace_hardirqs_on+0x1c/0x130 [ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.646220] ? do_raw_spin_trylock+0xa5/0x160 [ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73 [ 715.696005] pci_device_remove+0xab/0x1d0 [ 715.700018] __device_release_driver+0x35b/0x690 [ 715.704637] driver_detach+0x214/0x2f0 [ 715.708389] bus_remove_driver+0x11d/0x2f0 [ 715.712489] pci_unregister_driver+0x26/0x250 [ 71 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.

In the Linux kernel, the following vulnerability has been resolved: md: Don't suspend the array for interrupted reshape md_start_sync() will suspend the array if there are spares that can be added or removed from conf, however, if reshape is still in progress, this won't happen at all or data will be corrupted(remove_and_add_spares won't be called from md_choose_sync_action for reshape), hence there is no need to suspend the array if reshape is not done yet. Meanwhile, there is a potential deadlock for raid456: 1) reshape is interrupted; 2) set one of the disk WantReplacement, and add a new disk to the array, however, recovery won't start until the reshape is finished; 3) then issue an IO across reshpae position, this IO will wait for reshape to make progress; 4) continue to reshape, then md_start_sync() found there is a spare disk that can be added to conf, mddev_suspend() is called; Step 4 and step 3 is waiting for each other, deadlock triggered. Noted this problem is found by code review, and it's not reporduced yet. Fix this porblem by don't suspend the array for interrupted reshape, this is safe because conf won't be changed until reshape is done.

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr [Why] There is a potential memory access violation while iterating through array of dcn35 clks. [How] Limit iteration per array size.

In drivers/usb/gadget/udc/udc-xilinx.c in the Linux kernel before 5.16.12, the endpoint index is not validated and might be manipulated by the host for out-of-array access.

In the Linux kernel, the following vulnerability has been resolved: isdn: cpai: check ctr->cnr to avoid array index out of bound The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479]

In the Linux kernel, the following vulnerability has been resolved: pktgen: Avoid out-of-bounds access in get_imix_entries Passing a sufficient amount of imix entries leads to invalid access to the pkt_dev->imix_entries array because of the incorrect boundary check. UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24 index 20 is out of range for type 'imix_pkt [20]' CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl lib/dump_stack.c:117 __ubsan_handle_out_of_bounds lib/ubsan.c:429 get_imix_entries net/core/pktgen.c:874 pktgen_if_write net/core/pktgen.c:1063 pde_write fs/proc/inode.c:334 proc_reg_write fs/proc/inode.c:346 vfs_write fs/read_write.c:593 ksys_write fs/read_write.c:644 do_syscall_64 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130 Found by Linux Verification Center (linuxtesting.org) with SVACE. [ fp: allow to fill the array completely; minor changelog cleanup ]

In the Linux kernel, the following vulnerability has been resolved: bpf: Check the remaining info_cnt before repeating btf fields When trying to repeat the btf fields for array of nested struct, it doesn't check the remaining info_cnt. The following splat will be reported when the value of ret * nelems is greater than BTF_FIELDS_MAX: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49 index 11 is out of range for type 'btf_field_info [11]' CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: <TASK> dump_stack_lvl+0x57/0x70 dump_stack+0x10/0x20 ubsan_epilogue+0x9/0x40 __ubsan_handle_out_of_bounds+0x6f/0x80 ? kallsyms_lookup_name+0x48/0xb0 btf_parse_fields+0x992/0xce0 map_create+0x591/0x770 __sys_bpf+0x229/0x2410 __x64_sys_bpf+0x1f/0x30 x64_sys_call+0x199/0x9f0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fea56f2cc5d ...... </TASK> ---[ end trace ]--- Fix it by checking the remaining info_cnt in btf_repeat_fields() before repeating the btf fields.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Collect command failures data only for known commands DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbAdjTree Currently there is a bound check missing in the dbAdjTree while accessing the dmt_stree. To add the required check added the bool is_ctl which is required to determine the size as suggest in the following commit. https://lore.kernel.org/linux-kernel-mentees/f9475918-2186-49b8-b801-6f0f9e75f4fa@oracle.com/

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diAlloc Currently there is not check against the agno of the iag while allocating new inodes to avoid fragmentation problem. Added the check which is required.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5 According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode. When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed. ============================================================= UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]' CPU: 37 PID: 1678 Comm: cat Not tainted 6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace: dump_backtrace+0xe0/0x130 show_stack+0x20/0x60 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 ubsan_epilogue+0x10/0x50 __ubsan_handle_out_of_bounds+0x80/0x90 acpi_ds_exec_end_op+0x1bc/0x6d8 acpi_ps_parse_loop+0x57c/0x618 acpi_ps_parse_aml+0x1e0/0x4b4 acpi_ps_execute_method+0x24c/0x2b8 acpi_ns_evaluate+0x3a8/0x4bc acpi_evaluate_object+0x15c/0x37c acpi_evaluate_integer+0x54/0x15c show_power+0x8c/0x12c [acpi_power_meter]

In the Linux kernel, the following vulnerability has been resolved: netlink: prevent potential spectre v1 gadgets Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix array out-of-bound access in SoC stats Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process() function access ath12k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:1965:6 index -84 is out of range for type 's8[341]' (aka 'signed char[341]') CPU: 1 PID: 4995 Comm: syz-executor146 Not tainted 6.4.0-rc6-syzkaller-00037-gb6dad5178cea #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAllocDmapLev+0x3e5/0x430 fs/jfs/jfs_dmap.c:1965 dbAllocCtl+0x113/0x920 fs/jfs/jfs_dmap.c:1809 dbAllocAG+0x28f/0x10b0 fs/jfs/jfs_dmap.c:1350 dbAlloc+0x658/0xca0 fs/jfs/jfs_dmap.c:874 dtSplitUp fs/jfs/jfs_dtree.c:974 [inline] dtInsert+0xda7/0x6b00 fs/jfs/jfs_dtree.c:863 jfs_create+0x7b6/0xbb0 fs/jfs/namei.c:137 lookup_open fs/namei.c:3492 [inline] open_last_lookups fs/namei.c:3560 [inline] path_openat+0x13df/0x3170 fs/namei.c:3788 do_filp_open+0x234/0x490 fs/namei.c:3818 do_sys_openat2+0x13f/0x500 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_openat fs/open.c:1388 [inline] __se_sys_openat fs/open.c:1383 [inline] __x64_sys_openat+0x247/0x290 fs/open.c:1383 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1f4e33f7e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc21129578 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f4e33f7e9 RDX: 000000000000275a RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f1f4e2ff080 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f1f4e2ff110 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The bug occurs when the dbAllocDmapLev()function attempts to access dp->tree.stree[leafidx + LEAFIND] while the leafidx value is negative. To rectify this, the patch introduces a safeguard within the dbAllocDmapLev() function. A check has been added to verify if leafidx is negative. If it is, the function immediately returns an I/O error, preventing any further execution that could potentially cause harm. Tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path() snd_hda_get_connections() can return a negative error code. It may lead to accessing 'conn' array at a negative index. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: mdio: validate parameter addr in mdiobus_get_phy() The caller may pass any value as addr, what may result in an out-of-bounds access to array mdio_map. One existing case is stmmac_init_phy() that may pass -1 as addr. Therefore validate addr before using it.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write() The "id" comes from the user. Change the type to unsigned to prevent an array underflow.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix nexthop hash size The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/memhp: Fix access beyond end of drmem array dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry.

In the Linux kernel, the following vulnerability has been resolved: FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6 index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]') CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> ================================================================================ Kernel panic - not syncing: UBSAN: panic_on_warn set ... CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 panic+0x30f/0x770 kernel/panic.c:340 check_panic_on_warn+0x82/0xa0 kernel/panic.c:236 ubsan_epilogue lib/ubsan.c:223 [inline] __ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> Kernel Offset: disabled Rebooting in 86400 seconds.. The issue is caused when the value of lp becomes greater than CTLTREESIZE which is the max size of stree. Adding a simple check solves this issue. Dave: As the function returns a void, good error handling would require a more intrusive code reorganization, so I modified Osama's patch at use WARN_ON_ONCE for lack of a cleaner option. The patch is tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: check num of link levels when update pcie param In SR-IOV environment, the value of pcie_table->num_of_link_levels will be 0, and num_of_levels - 1 will cause array index out of bounds

In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013 do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was able to produce value less than -1 which cause the error. This patch simply add the change for the values less than 0. The patch is tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: use vmm_table as array in wilc struct Enabling KASAN and running some iperf tests raises some memory issues with vmm_table: BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4 Write of size 4 at addr c3a61540 by task wlan0-tx/95 KASAN detects that we are writing data beyond range allocated to vmm_table. There is indeed a mismatch between the size passed to allocator in wilc_wlan_init, and the range of possible indexes used later: allocation size is missing a multiplication by sizeof(u32)

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7 For pptable structs that use flexible array sizes, use flexible arrays.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for Polaris and Tonga For pptable structs that use flexible array sizes, use flexible arrays.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Avoid reading beyond LUT array When the floor LUT index (drm_fixp2int(lut_index) is the last index of the array the ceil LUT index will point to an entry beyond the array. Make sure we guard against it and use the value of the floor LUT index. v3: - Drop bits from commit description that didn't contribute anything of value