In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Implement bounds check for stream encoder creation in DCN401 'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn401_stream_encoder_create Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5

In the Linux kernel, the following vulnerability has been resolved: mm: vmalloc: ensure vmap_block is initialised before adding to queue Commit 8c61291fd850 ("mm: fix incorrect vbq reference in purge_fragmented_block") extended the 'vmap_block' structure to contain a 'cpu' field which is set at allocation time to the id of the initialising CPU. When a new 'vmap_block' is being instantiated by new_vmap_block(), the partially initialised structure is added to the local 'vmap_block_queue' xarray before the 'cpu' field has been initialised. If another CPU is concurrently walking the xarray (e.g. via vm_unmap_aliases()), then it may perform an out-of-bounds access to the remote queue thanks to an uninitialised index. This has been observed as UBSAN errors in Android: | Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP | | Call trace: | purge_fragmented_block+0x204/0x21c | _vm_unmap_aliases+0x170/0x378 | vm_unmap_aliases+0x1c/0x28 | change_memory_common+0x1dc/0x26c | set_memory_ro+0x18/0x24 | module_enable_ro+0x98/0x238 | do_init_module+0x1b0/0x310 Move the initialisation of 'vb->cpu' in new_vmap_block() ahead of the addition to the xarray.

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/cpufreq_cooling: Fix slab OOB issue Slab OOB issue is scanned by KASAN in cpu_power_to_freq(). If power is limited below the power of OPP0 in EM table, it will cause slab out-of-bound issue with negative array index. Return the lowest frequency if limited power cannot found a suitable OPP in EM table to fix this issue. Backtrace: [<ffffffd02d2a37f0>] die+0x104/0x5ac [<ffffffd02d2a5630>] bug_handler+0x64/0xd0 [<ffffffd02d288ce4>] brk_handler+0x160/0x258 [<ffffffd02d281e5c>] do_debug_exception+0x248/0x3f0 [<ffffffd02d284488>] el1_dbg+0x14/0xbc [<ffffffd02d75d1d4>] __kasan_report+0x1dc/0x1e0 [<ffffffd02d75c2e0>] kasan_report+0x10/0x20 [<ffffffd02d75def8>] __asan_report_load8_noabort+0x18/0x28 [<ffffffd02e6fce5c>] cpufreq_power2state+0x180/0x43c [<ffffffd02e6ead80>] power_actor_set_power+0x114/0x1d4 [<ffffffd02e6fac24>] allocate_power+0xaec/0xde0 [<ffffffd02e6f9f80>] power_allocator_throttle+0x3ec/0x5a4 [<ffffffd02e6ea888>] handle_thermal_trip+0x160/0x294 [<ffffffd02e6edd08>] thermal_zone_device_check+0xe4/0x154 [<ffffffd02d351cb4>] process_one_work+0x5e4/0xe28 [<ffffffd02d352f44>] worker_thread+0xa4c/0xfac [<ffffffd02d360124>] kthread+0x33c/0x358 [<ffffffd02d289940>] ret_from_fork+0xc/0x18

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore suspended array in md_check_recovery() mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) suspend the array: raid_postsuspend mddev_suspend 2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang; This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: bpf: Check the remaining info_cnt before repeating btf fields When trying to repeat the btf fields for array of nested struct, it doesn't check the remaining info_cnt. The following splat will be reported when the value of ret * nelems is greater than BTF_FIELDS_MAX: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49 index 11 is out of range for type 'btf_field_info [11]' CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: <TASK> dump_stack_lvl+0x57/0x70 dump_stack+0x10/0x20 ubsan_epilogue+0x9/0x40 __ubsan_handle_out_of_bounds+0x6f/0x80 ? kallsyms_lookup_name+0x48/0xb0 btf_parse_fields+0x992/0xce0 map_create+0x591/0x770 __sys_bpf+0x229/0x2410 __x64_sys_bpf+0x1f/0x30 x64_sys_call+0x199/0x9f0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fea56f2cc5d ...... </TASK> ---[ end trace ]--- Fix it by checking the remaining info_cnt in btf_repeat_fields() before repeating the btf fields.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix UBSAN panic in samsung_clk_init() With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to dereferencing `ctx->clk_data.hws` before setting `ctx->clk_data.num = nr_clks`. Move that up to fix the crash. UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP <snip> Call trace: samsung_clk_init+0x110/0x124 (P) samsung_clk_init+0x48/0x124 (L) samsung_cmu_register_one+0x3c/0xa0 exynos_arm64_register_cmu+0x54/0x64 __gs101_cmu_top_of_clk_init_declare+0x28/0x60 ...

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: don't allow 1 packet limit The current implementation does not work correctly with a limit of 1. iproute2 actually checks for this and this patch adds the check in kernel as well. This fixes the following syzkaller reported crash: UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x125/0x19f lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347 sfq_link net/sched/sch_sfq.c:210 [inline] sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238 sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500 sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296 netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline] dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362 __dev_close_many+0x214/0x350 net/core/dev.c:1468 dev_close_many+0x207/0x510 net/core/dev.c:1506 unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738 unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695 unregister_netdevice include/linux/netdevice.h:2893 [inline] __tun_detach+0x6b6/0x1600 drivers/net/tun.c:689 tun_detach drivers/net/tun.c:705 [inline] tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640 __fput+0x203/0x840 fs/file_table.c:280 task_work_run+0x129/0x1b0 kernel/task_work.c:185 exit_task_work include/linux/task_work.h:33 [inline] do_exit+0x5ce/0x2200 kernel/exit.c:931 do_group_exit+0x144/0x310 kernel/exit.c:1046 __do_sys_exit_group kernel/exit.c:1057 [inline] __se_sys_exit_group kernel/exit.c:1055 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055 do_syscall_64+0x6c/0xd0 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fe5e7b52479 Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f. RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0 R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270 The crash can be also be reproduced with the following (with a tc recompiled to allow for sfq limits of 1): tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s ../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1 ifconfig dummy0 up ping -I dummy0 -f -c2 -W0.1 8.8.8.8 sleep 1 Scenario that triggers the crash: * the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1 * TBF dequeues: it peeks from SFQ which moves the packet to the gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so it schedules itself for later. * the second packet is sent and TBF tries to queues it to SFQ. qdisc qlen is now 2 and because the SFQ limit is 1 the packet is dropped by SFQ. At this point qlen is 1, and all of the SFQ slots are empty, however q->tail is not NULL. At this point, assuming no more packets are queued, when sch_dequeue runs again it will decrement the qlen for the current empty slot causing an underflow and the subsequent out of bounds access.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix array index out of bound error in DCN32 DML [Why&How] LinkCapacitySupport array is indexed with the number of voltage states and not the number of max DPPs. Fix the error by changing the array declaration to use the correct (larger) array size of total number of voltage states.

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in netlbl_cipsov4_add_std Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource.

In the Linux kernel, the following vulnerability has been resolved: PCI: Add missing bridge lock to pci_bus_lock() One of the true positives that the cfg_access_lock lockdep effort identified is this sequence: WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: <TASK> ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120 Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself. For the same motivation as adding: bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge); to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock(). [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com]

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph]

In the Linux kernel, the following vulnerability has been resolved: btrfs: clean up our handling of refs == 0 in snapshot delete In reada we BUG_ON(refs == 0), which could be unkind since we aren't holding a lock on the extent leaf and thus could get a transient incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which could happen if we have extent tree corruption. Change that to return -EUCLEAN. In do_walk_down() we catch this case and handle it correctly, however we return -EIO, which -EUCLEAN is a more appropriate error code. Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert that to proper error handling. Also adjust the error message so we can actually do something with the information.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: don't leak tagger-owned storage on switch driver unbind In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data"), we had a call to tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at tree teardown time. There were problems with connecting to a switch tree as a whole, so this got reworked to connecting to individual switches within the tree. In this process, tag_ops->disconnect(ds) was made to be called only from switch.c (cross-chip notifiers emitted as a result of dynamic tag proto changes), but the normal driver teardown code path wasn't replaced with anything. Solve this problem by adding a function that does the opposite of dsa_switch_setup_tag_protocol(), which is called from the equivalent spot in dsa_switch_teardown(). The positioning here also ensures that we won't have any use-after-free in tagging protocol (*rcv) ops, since the teardown sequence is as follows: dsa_tree_teardown -> dsa_tree_teardown_master -> dsa_master_teardown -> unsets master->dsa_ptr, making no further packets match the ETH_P_XDSA packet type handler -> dsa_tree_teardown_ports -> dsa_port_teardown -> dsa_slave_destroy -> unregisters DSA net devices, there is even a synchronize_net() in unregister_netdevice_many() -> dsa_tree_teardown_switches -> dsa_switch_teardown -> dsa_switch_teardown_tag_protocol -> finally frees the tagger-owned storage

In the Linux kernel, the following vulnerability has been resolved: io_uring: check if we need to reschedule during overflow flush In terms of normal application usage, this list will always be empty. And if an application does overflow a bit, it'll have a few entries. However, nothing obviously prevents syzbot from running a test case that generates a ton of overflow entries, and then flushing them can take quite a while. Check for needing to reschedule while flushing, and drop our locks and do so if necessary. There's no state to maintain here as overflows always prune from head-of-list, hence it's fine to drop and reacquire the locks at the end of the loop.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in ext4_writepages we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first..

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix kernel crash if commands allocation fails If the commands allocation fails in nvmet_tcp_alloc_cmds() the kernel crashes in nvmet_tcp_release_queue_work() because of a NULL pointer dereference. nvmet: failed to install queue 0 cntlid 1 ret 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Fix the bug by setting queue->nr_cmds to zero in case nvmet_tcp_alloc_cmd() fails.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()' All error handling paths lead to 'out' where many resources are freed. Do it as well here instead of a direct return, otherwise 'log', 'ra' and 'log->one_page_buf' (at least) will leak.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe() I got a null-ptr-deref report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:fb_destroy_modelist+0x38/0x100 ... Call Trace: ufx_usb_probe.cold+0x2b5/0xac1 [smscufx] usb_probe_interface+0x1aa/0x3c0 [usbcore] really_probe+0x167/0x460 ... ret_from_fork+0x1f/0x30 If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will be called to destroy modelist in the error handling path. But modelist has not been initialized yet, so it will result in null-ptr-deref. Initialize modelist before calling fb_alloc_cmap() to fix this bug.

In the Linux kernel, the following vulnerability has been resolved: riscv: cpu_ops_sbi: Use static array for boot_data Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU

In the Linux kernel, the following vulnerability has been resolved: net: phy: Fix missing of_node_put() for leds The call of of_get_child_by_name() will cause refcount incremented for leds, if it succeeds, it should call of_node_put() to decrease it, fix it.

In the Linux kernel, the following vulnerability has been resolved: sched/core: Disable page allocation in task_tick_mm_cid() With KASAN and PREEMPT_RT enabled, calling task_work_add() in task_tick_mm_cid() may cause the following splat. [ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe [ 63.696416] preempt_count: 10001, expected: 0 [ 63.696416] RCU nest depth: 1, expected: 1 This problem is caused by the following call trace. sched_tick() [ acquire rq->__lock ] -> task_tick_mm_cid() -> task_work_add() -> __kasan_record_aux_stack() -> kasan_save_stack() -> stack_depot_save_flags() -> alloc_pages_mpol_noprof() -> __alloc_pages_noprof() -> get_page_from_freelist() -> rmqueue() -> rmqueue_pcplist() -> __rmqueue_pcplist() -> rmqueue_bulk() -> rt_spin_lock() The rq lock is a raw_spinlock_t. We can't sleep while holding it. IOW, we can't call alloc_pages() in stack_depot_save_flags(). The task_tick_mm_cid() function with its task_work_add() call was introduced by commit 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") in v6.4 kernel. Fortunately, there is a kasan_record_aux_stack_noalloc() variant that calls stack_depot_save_flags() while not allowing it to allocate new pages. To allow task_tick_mm_cid() to use task_work without page allocation, a new TWAF_NO_ALLOC flag is added to enable calling kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack() if set. The task_tick_mm_cid() function is modified to add this new flag. The possible downside is the missing stack trace in a KASAN report due to new page allocation required when task_work_add_noallloc() is called which should be rare.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix call trace observed during I/O with CMF enabled The following was seen with CMF enabled: BUG: using smp_processor_id() in preemptible code: systemd-udevd/31711 kernel: caller is lpfc_update_cmf_cmd+0x214/0x420 [lpfc] kernel: CPU: 12 PID: 31711 Comm: systemd-udevd kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x44/0x57 kernel: check_preemption_disabled+0xbf/0xe0 kernel: lpfc_update_cmf_cmd+0x214/0x420 [lpfc] kernel: lpfc_nvme_fcp_io_submit+0x23b4/0x4df0 [lpfc] this_cpu_ptr() calls smp_processor_id() in a preemptible context. Fix by using per_cpu_ptr() with raw_smp_processor_id() instead.

In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init() One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: remove unreasonable unlock in ocfs2_read_blocks Patch series "Misc fixes for ocfs2_read_blocks", v5. This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix the issue reported by syzbot, which detects bad unlock balance in ocfs2_read_blocks(). The second patch fixes an issue reported by Heming Zhao when reviewing above fix. This patch (of 2): There was a lock release before exiting, so remove the unreasonable unlock.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: rpmpd: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".

In the Linux kernel, the following vulnerability has been resolved: drm/plane: Move range check for format_count earlier While the check for format_count > 64 in __drm_universal_plane_init() shouldn't be hit (it's a WARN_ON), in its current position it will then leak the plane->format_types array and fail to call drm_mode_object_unregister() leaking the modeset identifier. Move it to the start of the function to avoid allocating those resources in the first place.

The VFS subsystem in the Linux kernel 3.x provides an incomplete set of requirements for setattr operations that underspecifies removing extended privilege attributes, which allows local users to cause a denial of service (capability stripping) via a failed invocation of a system call, as demonstrated by using chown to remove a capability from the ping or Wireshark dumpcap program.

An issue was discovered in the Linux kernel before 5.9. arch/x86/kvm/svm/sev.c allows attackers to cause a denial of service (soft lockup) by triggering destruction of a large SEV VM (which requires unregistering many encrypted regions), aka CID-7be74942f184.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Add poll mod list filling check In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: btrfs: handle errors from btrfs_dec_ref() properly In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is incorrect, we have proper error handling here, return the error.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before try to access it [why & how] Change the order of the pipe_ctx->plane_state check to ensure that plane_state is not null before accessing it.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: Check tbo resource pointer Validate tbo resource pointer, skip if NULL

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: do not stop RX on failing RX callback RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add missing NULL pointer check within dpcd_extend_address_range [Why & How] ASSERT if return NULL from kcalloc.

In the Linux kernel, the following vulnerability has been resolved: samples/landlock: Fix path_list memory leak Clang static analysis reports this error sandboxer.c:134:8: warning: Potential leak of memory pointed to by 'path_list' ret = 0; ^ path_list is allocated in parse_path() but never freed.

In the Linux kernel, the following vulnerability has been resolved: MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected, cpu_max_bits_warn() generates a runtime warning similar as below while we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [ 3.084034] Hardware name: Loongson Loongson-3A4000-7A1000-1w-V0.1-CRB/Loongson-LS3A4000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27 [ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000 [ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430 [ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff [ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890 [ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa [ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000 [ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000 [ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000 [ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286 [ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c [ 3.195868] ... [ 3.199917] Call Trace: [ 3.203941] [<98000000002086d8>] show_stack+0x38/0x14c [ 3.210666] [<9800000000cf846c>] dump_stack_lvl+0x60/0x88 [ 3.217625] [<980000000023d268>] __warn+0xd0/0x100 [ 3.223958] [<9800000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc [ 3.231150] [<9800000000210220>] show_cpuinfo+0x5e8/0x5f0 [ 3.238080] [<98000000004f578c>] seq_read_iter+0x354/0x4b4 [ 3.245098] [<98000000004c2e90>] new_sync_read+0x17c/0x1c4 [ 3.252114] [<98000000004c5174>] vfs_read+0x138/0x1d0 [ 3.258694] [<98000000004c55f8>] ksys_read+0x70/0x100 [ 3.265265] [<9800000000cfde9c>] do_syscall+0x7c/0x94 [ 3.271820] [<9800000000202fe4>] handle_syscall+0xc4/0x160 [ 3.281824] ---[ end trace 8b484262b4b8c24c ]---

In the Linux kernel, the following vulnerability has been resolved: udmabuf: validate ubuf->pagecount Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The problem was in ubuf->pages == ZERO_PTR. ubuf->pagecount is calculated from arguments passed from user-space. If user creates udmabuf with list.size == 0 then ubuf->pagecount will be also equal to zero; it causes kmalloc_array() to return ZERO_PTR. Fix it by validating ubuf->pagecount before passing it to kmalloc_array().

In the Linux kernel, the following vulnerability has been resolved: media: venus: vdec: fixed possible memory leak issue The venus_helper_alloc_dpb_bufs() implementation allows an early return on an error path when checking the id from ida_alloc_min() which would not release the earlier buffer allocation. Move the direct kfree() from the error checking of dma_alloc_attrs() to the common fail path to ensure that allocations are released on all error paths in this function. Addresses-Coverity: 1494120 ("Resource leak")

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before used [WHAT & HOW] Poniters, such as dc->clk_mgr, are null checked previously in the same function, so Coverity warns "implies that "dc->clk_mgr" might be null". As a result, these pointers need to be checked when used again. This fixes 10 FORWARD_NULL issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: Allocate memory for driver private data Fix driver not allocating memory for struct btintel_data which is used to store internal data.

In the Linux kernel, the following vulnerability has been resolved: ice: track AF_XDP ZC enabled queues in bitmap Commit c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") silently introduced a regression and broke the Tx side of AF_XDP in copy mode. xsk_pool on ice_ring is set only based on the existence of the XDP prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed. That is not something that should happen for copy mode as it should use the regular data path ice_clean_tx_irq. This results in a following splat when xdpsock is run in txonly or l2fwd scenarios in copy mode: <snip> [ 106.050195] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 106.057269] #PF: supervisor read access in kernel mode [ 106.062493] #PF: error_code(0x0000) - not-present page [ 106.067709] PGD 0 P4D 0 [ 106.070293] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 106.074721] CPU: 61 PID: 0 Comm: swapper/61 Not tainted 5.12.0-rc2+ #45 [ 106.081436] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 106.092027] RIP: 0010:xp_raw_get_dma+0x36/0x50 [ 106.096551] Code: 74 14 48 b8 ff ff ff ff ff ff 00 00 48 21 f0 48 c1 ee 30 48 01 c6 48 8b 87 90 00 00 00 48 89 f2 81 e6 ff 0f 00 00 48 c1 ea 0c <48> 8b 04 d0 48 83 e0 fe 48 01 f0 c3 66 66 2e 0f 1f 84 00 00 00 00 [ 106.115588] RSP: 0018:ffffc9000d694e50 EFLAGS: 00010206 [ 106.120893] RAX: 0000000000000000 RBX: ffff88984b8c8a00 RCX: ffff889852581800 [ 106.128137] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88984cd8b800 [ 106.135383] RBP: ffff888123b50001 R08: ffff889896800000 R09: 0000000000000800 [ 106.142628] R10: 0000000000000000 R11: ffffffff826060c0 R12: 00000000000000ff [ 106.149872] R13: 0000000000000000 R14: 0000000000000040 R15: ffff888123b50018 [ 106.157117] FS: 0000000000000000(0000) GS:ffff8897e0f40000(0000) knlGS:0000000000000000 [ 106.165332] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.171163] CR2: 0000000000000030 CR3: 000000000560a004 CR4: 00000000007706e0 [ 106.178408] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.185653] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.192898] PKRU: 55555554 [ 106.195653] Call Trace: [ 106.198143] <IRQ> [ 106.200196] ice_clean_tx_irq_zc+0x183/0x2a0 [ice] [ 106.205087] ice_napi_poll+0x3e/0x590 [ice] [ 106.209356] __napi_poll+0x2a/0x160 [ 106.212911] net_rx_action+0xd6/0x200 [ 106.216634] __do_softirq+0xbf/0x29b [ 106.220274] irq_exit_rcu+0x88/0xc0 [ 106.223819] common_interrupt+0x7b/0xa0 [ 106.227719] </IRQ> [ 106.229857] asm_common_interrupt+0x1e/0x40 </snip> Fix this by introducing the bitmap of queues that are zero-copy enabled, where each bit, corresponding to a queue id that xsk pool is being configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and checked within ice_xsk_pool(). The latter is a function used for deciding which napi poll routine is executed. Idea is being taken from our other drivers such as i40e and ixgbe.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register(). We don't need the device node after it. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - don't sleep when in softirq When kunpeng920 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. The kernel will report the following error: BUG: scheduling while atomic: swapper/57/0/0x00000300 Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c dump_stack+0xd8/0x140 __schedule_bug+0x68/0x80 __schedule+0x728/0x840 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x24 __mutex_lock.constprop.0+0x594/0x5dc __mutex_lock_slowpath+0x1c/0x30 mutex_lock+0x50/0x60 sec_request_init+0x8c/0x1a0 [hisi_sec2] sec_process+0x28/0x1ac [hisi_sec2] sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2] sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2] crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp_output_tail+0x348/0x5c0 [esp4] esp_output+0x120/0x19c [esp4] xfrm_output_one+0x25c/0x4d4 xfrm_output_resume+0x6c/0x1fc xfrm_output+0xac/0x3c0 xfrm4_output+0x64/0x130 ip_build_and_send_pkt+0x158/0x20c tcp_v4_send_synack+0xdc/0x1f0 tcp_conn_request+0x7d0/0x994 tcp_v4_conn_request+0x58/0x6c tcp_v6_conn_request+0xf0/0x100 tcp_rcv_state_process+0x1cc/0xd60 tcp_v4_do_rcv+0x10c/0x250 tcp_v4_rcv+0xfc4/0x10a4 ip_protocol_deliver_rcu+0xf4/0x200 ip_local_deliver_finish+0x58/0x70 ip_local_deliver+0x68/0x120 ip_sublist_rcv_finish+0x70/0x94 ip_list_rcv_finish.constprop.0+0x17c/0x1d0 ip_sublist_rcv+0x40/0xb0 ip_list_rcv+0x140/0x1dc __netif_receive_skb_list_core+0x154/0x28c __netif_receive_skb_list+0x120/0x1a0 netif_receive_skb_list_internal+0xe4/0x1f0 napi_complete_done+0x70/0x1f0 gro_cell_poll+0x9c/0xb0 napi_poll+0xcc/0x264 net_rx_action+0xd4/0x21c __do_softirq+0x130/0x358 irq_exit+0x11c/0x13c __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 arch_cpu_idle+0x18/0x40 default_idle_call+0x5c/0x1c0 cpuidle_idle_call+0x174/0x1b0 do_idle+0xc8/0x160 cpu_startup_entry+0x30/0x11c secondary_start_kernel+0x158/0x1e4 softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with preempt_count 00000100, exited with fffffe00?