An issue was discovered in SolarWinds N-Central 12.3.0.670. The sudo configuration has incorrect access control because the nable web user account is effectively able to run arbitrary OS commands as root (i.e., the use of root privileges is not limited to specific programs listed in the sudoers file).

A security flaw has been discovered in D-Link DIR-823X 250416. Impacted is the function sub_41E2A0 of the file /goform/set_mode. Performing a manipulation of the argument lan_gateway results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in includes/webconsole.php in RaspAP 2.5. With authenticated access, an attacker can use a misconfigured (and virtually unrestricted) web console to attack the underlying OS (Raspberry Pi) running this software, and execute commands on the system (including ones for uploading of files and execution of code).

Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place.

The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'.

Jenkins Selection tasks Plugin 1.0 and earlier executes a user-specified program on the Jenkins controller, allowing attackers with Job/Configure permission to execute an arbitrary system command on the Jenkins controller as the OS user that the Jenkins process is running as.

Jenkins CryptoMove Plugin 0.1.33 and earlier allows attackers with Job/Configure access to execute arbitrary OS commands on the Jenkins master as the OS user account running Jenkins.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

/graphStatus/displayServiceStatus.php in Centreon 19.10.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the RRDdatabase_path parameter.

Single Sign-On Portal System developed by WellChoose has a OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the server.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

httpd on TP-Link TL-WPA4220 devices (versions 2 through 4) allows remote authenticated users to execute arbitrary OS commands by sending crafted POST requests to the endpoint /admin/powerline. Fixed version: TL-WPA4220(EU)_V4_201023

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

The Yale WIPC-303W 2.21 through 2.31 camera is vulnerable to remote command execution (RCE) through command injection via the HTTP API. NOTE: This may be a duplicate of CVE-2020-10176

iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script.

A vulnerability classified as critical was found in DedeCMS 5.7.111. This vulnerability affects the function AddMyAddon of the file album_add.php. The manipulation of the argument albumUploadFiles leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-240940.

There is remote authenticated OS command injection on TP-Link Archer C20i 0.9.1 3.2 v003a.0 Build 170221 Rel.55462n devices vie the X_TP_ExternalIPv6Address HTTP parameter, allowing a remote attacker to run arbitrary commands on the router with root privileges.

Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

A flaw was found in rubyipmi, a gem used in the Baseboard Management Controller (BMC) component of Red Hat Satellite. An authenticated attacker with host creation or update permissions could exploit this vulnerability by crafting a malicious username for the BMC interface. This could lead to remote code execution (RCE) on the system.

Apache Kylin 2.3.0, and releases up to 2.6.5 and 3.0.1 has some restful apis which will concatenate os command with the user input string, a user is likely to be able to execute any os command without any protection or validation.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.12. Affected by this issue is the function SessionController of the file /isomp-protocol/protocol/session of the component SSH Protocol Handler. The manipulation of the argument keypassword leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

ALGO 8180 IP Audio Alerter Web UI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28322.

ALGO 8180 IP Audio Alerter Web UI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28289.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

On TP-Link Tapo C260 v1, command injection vulnerability exists due to improper sanitization in certain POST parameters during configuration synchronization. An authenticated attacker can execute arbitrary system commands with high impact on confidentiality, integrity and availability. It may cause full device compromise.

ALGO 8180 IP Audio Alerter Ping Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-25568.

Artica Web Proxy 4.30.000000 allows an authenticated remote attacker to inject commands via the service-cmds parameter in cyrus.php. These commands are executed with root privileges via service_cmds_peform.

The authenticated remote command execution (RCE) vulnerability exists in the Parental Control page on TP-Link Archer C7(EU) V2 and TL-WR841N/ND(MS) V9. This issue affects Archer C7(EU) V2: before 241108 and TL-WR841N/ND(MS) V9: before 241108. Both products have reached the status of EOL (end-of-life). It's recommending to purchase the new product to ensure better performance and security. If replacement is not an option in the short term, please use the second reference link to download and install the patch(es).

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This issue affects the function cgiMain of the file /cgi-bin/upload.cgi. Executing manipulation of the argument filename can lead to os command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on Victure WR1200 devices through 1.0.3. A command injection vulnerability was found within the web interface of the device, allowing an attacker with valid credentials to inject arbitrary shell commands to be executed by the device with root privileges. This occurs in the ping and traceroute features. An attacker would thus be able to use this vulnerability to open a reverse shell on the device with root privileges.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.

The administrative interface of Cohesive Networks vns3:vpn appliances before version 4.11.1 is vulnerable to authenticated remote code execution leading to server compromise.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

An issue discovered in TenghuTOS TWS-200 firmware version:V4.0-201809201424 allows a remote attacker to execute arbitrary code via crafted command on the ping page component.

ALGO 8180 IP Audio Alerter SCI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the SCI module. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28295.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

SAP Business Object (Adaptive Job Server) - versions 420, 430, allows remote execution of arbitrary commands on Unix, when program objects execution is enabled, to authenticated users with scheduling rights, using the BI Launchpad, Central Management Console or a custom application based on the public java SDK. Programs could impact the confidentiality, integrity and availability of the system.

OCS Inventory NG 2.7 allows Remote Command Execution via shell metacharacters to require/commandLine/CommandLine.php because mib_file in plugins/main_sections/ms_config/ms_snmp_config.php is mishandled in get_mib_oid.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device.

A security vulnerability has been detected in LB-LINK BL-X26 1.2.8. This affects an unknown function of the file /goform/set_blacklist of the component HTTP Handler. Such manipulation of the argument mac leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in LB-LINK BL-X26 1.2.8. The impacted element is an unknown function of the file /goform/set_hidessid_cfg of the component HTTP Handler. This manipulation of the argument enable causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

ALGO 8180 IP Audio Alerter Web UI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28290.

The ns_backup extension through 13.0.2 for TYPO3 allows command injection.