Vulnerability CVE-2024-22021 allows a Veeam Recovery Orchestrator user with a low privileged role (Plan Author) to retrieve plans from a Scope other than the one they are assigned to.

Improper access controls on entries in Devolutions Server 2022.3.12 and earlier could allow an authenticated user to access sensitive data without proper authorization.

Jenkins build-metrics Plugin 1.3 and earlier does not perform permission checks in multiple HTTP endpoints, allowing attackers with Overall/Read permission to obtain information about jobs otherwise inaccessible to them.

Jenkins Request Rename Or Delete Plugin 1.1.0 and earlier does not correctly perform a permission check in an HTTP endpoint, allowing attackers with Overall/Read permission to view an administrative configuration page listing pending requests.

IBM UrbanCode Deploy (UCD) 6.2.0.0 through 6.2.7.16, 7.0.0.0 through 7.0.5.11, 7.1.0.0 through 7.1.2.7, and 7.2.0.0 through 7.2.3.0 could allow an authenticated user to obtain sensitive information in some instances due to improper security checking. IBM X-Force ID: 231360.

An incorrect permission check in Jenkins requests-plugin Plugin 2.2.16 and earlier allows attackers with Overall/Read permission to view the list of pending requests.

A flaw was found in Moodle in versions 3.11 to 3.11.4, 3.10 to 3.10.8, 3.9 to 3.9.11 and earlier unsupported versions. Insufficient capability checks could lead to users accessing their grade report for courses where they did not have the required gradereport/user:view capability.

Dart SDK contains the HTTPClient in dart:io library whcih includes authorization headers when handling cross origin redirects. These headers may be explicitly set and contain sensitive information. By default, HttpClient handles redirection logic. If a request is sent to example.com with authorization header and it redirects to an attackers site, they might not expect attacker site to receive authorization header. We recommend updating the Dart SDK to version 2.16.0 or beyond.

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability is due to improper enforcement of administrative privilege levels for high-value sensitive data. An attacker with read-only Administrator privileges for the web-based management interface on an affected device could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system.

A vulnerability in a specific REST API endpoint of Cisco NDFC could allow an authenticated, low-privileged, remote attacker to learn sensitive information on an affected device. This vulnerability is due to insufficient authorization controls on the affected REST API endpoint. An attacker could exploit this vulnerability by sending crafted API requests to the affected endpoint. A successful exploit could allow the attacker to download config only or full backup files and learn sensitive configuration information. This vulnerability only affects a specific REST API endpoint and does not affect the web-based management interface.

Incorrect authorization in the permission component in Devolutions Server 2024.3.7.0 and earlier allows an authenticated user to view the password history of an entry without the view password permission.

Invenio-Drafts-Resources is a submission/deposit module for Invenio, a software framework for research data management. Invenio-Drafts-Resources prior to versions 0.13.7 and 0.14.6 does not properly check permissions when a record is published. The vulnerability is exploitable in a default installation of InvenioRDM. An authenticated a user is able via REST API calls to publish draft records of other users if they know the record identifier and the draft validates (e.g. all require fields filled out). An attacker is not able to modify the data in the record, and thus e.g. *cannot* change a record from restricted to public. The problem is patched in Invenio-Drafts-Resources v0.13.7 and 0.14.6, which is part of InvenioRDM v6.0.1 and InvenioRDM v7.0 respectively.

An issue was discovered where improper authorization controls affected certain queries that could allow a malicious actor to circumvent Document Level Security in Elasticsearch and get access to documents that their roles would normally not allow.

Due to improper authorization check, business users who are using Israeli File from SHAAM program (/ATL/VQ23 transaction), are granted more than needed authorization to perform certain transaction, which may lead to users getting access to data that would otherwise be restricted.

The “List View” function of ShinHer StudyOnline System is not under authority control. After logging in with user’s privilege, remote attackers can access the content of other users’ message boards by crafting URL parameters.

An improper authorization vulnerability exists in Jenkins Mesos Plugin 0.17.1 and earlier in MesosCloud.java that allows attackers with Overall/Read access to obtain credentials IDs for credentials stored in Jenkins.

IBM UrbanCode Deploy 6.0 through 6.2.2.1 could allow an authenticated user to read sensitive information due to UCD REST endpoints not properly authorizing users when determining who can read data. IBM X-Force ID: 112119.

An improper authorization vulnerability exists in lunary-ai/lunary version 1.5.5. The /users/me/org endpoint lacks adequate access control mechanisms, allowing unauthorized users to access sensitive information about all team members in the current organization. This vulnerability can lead to the disclosure of sensitive information such as names, roles, or emails to users without sufficient privileges, resulting in privacy violations and potential reconnaissance for targeted attacks.

Nextcloud server is a self hosted system designed to provide cloud style services. The groupfolders application for Nextcloud allows sharing a folder with a group of people. In addition, it allows setting "advanced permissions" on subfolders, for example, a user could be granted access to the groupfolder but not specific subfolders. Due to a lacking permission check in affected versions, a user could still access these subfolders by copying the groupfolder to another location. It is recommended that the Nextcloud Server is upgraded to 20.0.14, 21.0.6 or 22.2.1. Users unable to upgrade should disable the "groupfolders" application in the admin settings.

A vulnerability has been identified in Mendix Applications using Mendix 8 (All versions < V8.18.13), Mendix Applications using Mendix 9 (All versions < V9.6.2). Applications built with affected versions of Mendix Studio Pro do not properly control read access for certain client actions. This could allow authenticated attackers to retrieve the changedDate attribute of arbitrary objects, even when they don't have read access to them.

In Apache Pulsar it is possible to access data from BookKeeper that does not belong to the topics accessible by the authenticated user. The Admin API get-message-by-id requires the user to input a topic and a ledger id. The ledger id is a pointer to the data, and it is supposed to be a valid it for the topic. Authorisation controls are performed against the topic name and there is not proper validation the that ledger id is valid in the context of such ledger. So it may happen that the user is able to read from a ledger that contains data owned by another tenant. This issue affects Apache Pulsar Apache Pulsar version 2.8.0 and prior versions; Apache Pulsar version 2.7.3 and prior versions; Apache Pulsar version 2.6.4 and prior versions.

An issue has been discovered in GitLab CE/EE affecting all versions from 15.6 before 18.0.6, 18.1 before 18.1.4, and 18.2 before 18.2.2 that under certain conditions could have allowed authenticated users to bypass access controls and download private artifacts by accessing specific API endpoints.

Missing authorization in GitLab EE versions between 12.4 and 14.3.6, between 14.4.0 and 14.4.4, and between 14.5.0 and 14.5.2 allowed an attacker to access a user's custom project and group templates

SMU versions prior to 14.8.7825.01 are susceptible to unintended information disclosure, through URL manipulation. Authenticated users in Storage, Server or combined Server+Storage administrative roles are able to access SMU configuration backup, that would normally be barred to those specific administrative roles.

SMU versions prior to 14.8.7825.01 are susceptible to unintended information disclosure, through URL manipulation. Authenticated users in a Storage administrative role are able to access HNAS configuration backup and diagnostic data, that would normally be barred to that specific administrative role.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability via the `quoteId` parameter. An attacker can abuse this vulnerability to disclose sensitive information.

In the Druid ingestion system, the InputSource is used for reading data from a certain data source. However, the HTTP InputSource allows authenticated users to read data from other sources than intended, such as the local file system, with the privileges of the Druid server process. This is not an elevation of privilege when users access Druid directly, since Druid also provides the Local InputSource, which allows the same level of access. But it is problematic when users interact with Druid indirectly through an application that allows users to specify the HTTP InputSource, but not the Local InputSource. In this case, users could bypass the application-level restriction by passing a file URL to the HTTP InputSource. This issue was previously mentioned as being fixed in 0.21.0 as per CVE-2021-26920 but was not fixed in 0.21.0 or 0.21.1.

Agents are able to list appointments in the calendars without required permissions. This issue affects: OTRS AG ((OTRS)) Community Edition: 6.0.x version 6.0.1 and later versions. OTRS AG OTRS: 7.0.x versions prior to 7.0.27.

The Ninja Forms WordPress plugin is vulnerable to sensitive information disclosure via the bulk_export_submissions function found in the ~/includes/Routes/Submissions.php file, in versions up to and including 3.5.7. This allows authenticated attackers to export all Ninja Forms submissions data via the /ninja-forms-submissions/export REST API which can include personally identifiable information.

The permission control of AIFU cashier management salary query function can be bypassed, thus after obtaining general user’s permission, the remote attacker can access account information except passwords by crafting URL parameters.

Shopware is an open source eCommerce platform. In versions prior to 6.4.1.1 the admin api has exposed some internal hidden fields when an association has been loaded with a to many reference. Users are recommend to update to version 6.4.1.1. You can get the update to 6.4.1.1 regularly via the Auto-Updater or directly via the download overview. For older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

Improper Authorization in GitHub repository froxlor/froxlor prior to 2.0.0-beta1.

An improper authorization vulnerability in the Palo Alto Networks Cortex XSOAR server enables an authenticated network-based attacker with investigation read permissions to download files from incident investigations of which they are aware but are not a part of. This issue impacts: All Cortex XSOAR 5.5.0 builds; Cortex XSOAR 6.1.0 builds earlier than 12099345. This issue does not impact Cortex XSOAR 6.2.0 versions.

An authorization issue in the mirroring logic allowed read access to private repositories in GitLab CE/EE 10.6 and later through 13.0.5

NATS nats-server before 2.9.23 and 2.10.x before 2.10.2 has an authentication bypass. An implicit $G user in an authorization block can sometimes be used for unauthenticated access, even when the intention of the configuration was for each user to have an account. The earliest affected version is 2.2.0.

BigBlueButton is an open source web conferencing system. Starting in version 2.2 and prior to versions 2.3.18 and 2.4-rc-6, an attacker can circumvent access restrictions for drawing on the whiteboard. The permission check is inadvertently skipped on the server, due to a previously introduced grace period. The attacker must be a meeting participant. The problem has been patched in versions 2.3.18 and 2.4-rc-6. There are currently no known workarounds.

GitLab Community and Enterprise Editions before 10.1.6, 10.2.6, and 10.3.4 are vulnerable to an authorization bypass issue in the Projects::MergeRequests::CreationsController component resulting in an attacker to see every project name and their respective namespace on a GitLab instance.

Users are able to read group conversations without actively taking part in them. Next to one to one conversations, users are able to start group conversations with multiple users. It was found possible to obtain the contents of these group conversations without being part of it. This could lead to information leakage where confidential information discussed in private groups is read by other users without the users knowledge.

The QuickEdit module does not properly check access to fields in some circumstances, which can lead to unintended disclosure of field data. Sites are only affected if the QuickEdit module (which comes with the Standard profile) is installed.

Default SilverStripe GraphQL Server (aka silverstripe/graphql) 3.x through 3.4.1 permission checker not inherited by query subclass.

Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. An authentication mechanism added in version 0.7.0 enables some malicious user to obtain secrets utilizing the injected credentials within the `~/.netrc` file. Refer to the referenced GitHub Security Advisory for complete details. This is fixed in version 0.7.5.

Magento versions 2.4.1 (and earlier), 2.4.0-p1 (and earlier) and 2.3.6 (and earlier) are affected by an improper authorization vulnerability in the integrations module. Successful exploitation could lead to unauthorized access to restricted resources by an unauthenticated attacker. Access to the admin console is required for successful exploitation.

The WP Post Page Clone WordPress plugin before 1.2 allows users with a role as low as Contributor to clone and view other users' draft and password-protected posts which they cannot view normally.

Jinjava before 2.5.4 allow access to arbitrary classes by calling Java methods on objects passed into a Jinjava context. This could allow for abuse of the application class loader, including Arbitrary File Disclosure.

The RVM WordPress plugin before 6.4.2 does not have proper authorisation, CSRF checks and validation of the rvm_upload_regions_file_path parameter in the rvm_import_regions AJAX action, allowing any authenticated user, such as subscriber, to read arbitrary files on the web server

Cloudera Search in CDH before 5.7.0 allows unauthorized document access because Solr Queries by document id can bypass Sentry document-level security via the RealTimeGetHandler.

An improper access control vulnerability was identified in GitHub Enterprise Server that allowed an authenticated user with the ability to fork a repository to disclose Actions secrets for the parent repository of the fork. This vulnerability existed due to a flaw that allowed the base reference of a pull request to be updated to point to an arbitrary SHA or another pull request outside of the fork repository. By establishing this incorrect reference in a PR, the restrictions that limit the Actions secrets sent a workflow from forks could be bypassed. This vulnerability affected GitHub Enterprise Server version 3.0.0, 3.0.0.rc2, and 3.0.0.rc1. This vulnerability was reported via the GitHub Bug Bounty program.

The Java API in accesuniversitat.gencat.cat 1.7.5 allows remote attackers to get personal information of all registered students via several API endpoints.

An issue has been discovered in GitLab affecting all versions starting with 3.0.1. Improper access control allows demoted project members to access details on authored merge requests

A document disclosure flaw was found in Elasticsearch versions after 7.6.0 and before 7.11.0 when Document or Field Level Security is used. Get requests do not properly apply security permissions when executing a query against a recently updated document. This affects documents that have been updated and not yet refreshed in the index. This could result in the search disclosing the existence of documents and fields the attacker should not be able to view.