In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_POE Currently poe_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.por_el0, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of POR_EL1 will be retained. Before this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50 After this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: flush pending destroy work before exit_net release Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [ 1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ? __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750] __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [ 1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953] ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [ 1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036] __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [ 1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list); 11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat ---truncated---

In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case.

In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d

There is a use-after-free vulnerability in the Linux kernel through 5.5.2 in the vc_do_resize function in drivers/tty/vt/vt.c.

In the Linux kernel, the following vulnerability has been resolved: s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl().

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe().

Google Chrome before 10.0.648.127 on Linux does not properly handle Unicode ranges, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet Only skip the code path trying to access the rfc1042 headers when the buffer is too small, so the driver can still process packets without rfc1042 headers.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read.

In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Disable KASAN in apply_alternatives() Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ]

Google Chrome before 9.0.597.107 on 64-bit Linux platforms does not properly perform pickle deserialization, which allows remote attackers to cause a denial of service (out-of-bounds read) via unspecified vectors.

Certain WithSecure products have a buffer over-read whereby processing certain fuzz file types may cause a denial of service (DoS). This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 15 and later.

Out of bounds read in V8 in Google Chrome prior to 133.0.6943.141 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium)

The ip6gre_err function in net/ipv6/ip6_gre.c in the Linux kernel allows remote attackers to have unspecified impact via vectors involving GRE flags in an IPv6 packet, which trigger an out-of-bounds access.

The ip_cmsg_recv_checksum function in net/ipv4/ip_sockglue.c in the Linux kernel before 4.10.1 has incorrect expectations about skb data layout, which allows local users to cause a denial of service (buffer over-read) or possibly have unspecified other impact via crafted system calls, as demonstrated by use of the MSG_MORE flag in conjunction with loopback UDP transmission.

An elevation of privilege vulnerability exists in the NVIDIA GPU driver (gm20b_clk_throt_set_cdev_state), where an out of bound memory read is used as a function pointer could lead to code execution in the kernel.This issue is rated as high because it could allow a local malicious application to execute arbitrary code within the context of a privileged process. Product: Android. Version: N/A. Android ID: A-34705430. References: N-CVE-2017-6264.

Insufficient validation of untrusted input in V8 in Google Chrome prior to 59.0.3071.104 for Mac, Windows, and Linux, and 59.0.3071.117 for Android, allowed a remote attacker to perform out of bounds memory access via a crafted HTML page.

An issue was discovered in Adobe Flash Player 27.0.0.183 and earlier versions. This vulnerability occurs as a result of a computation that reads data that is past the end of the target buffer; the computation is part of providing language- and region- or country- specific functionality. The use of an invalid (out-of-range) pointer offset during access of internal data structure fields causes the vulnerability. A successful attack can lead to sensitive data exposure.

An issue was discovered in Adobe Flash Player 27.0.0.183 and earlier versions. This vulnerability occurs as a result of a computation that reads data that is past the end of the target buffer; the computation is part of AdobePSDK metadata. The use of an invalid (out-of-range) pointer offset during access of internal data structure fields causes the vulnerability. A successful attack can lead to sensitive data exposure.

An out-of-bounds read in V8 in Google Chrome prior to 57.0.2987.133 for Linux, Windows, and Mac, and 57.0.2987.132 for Android, allowed a remote attacker to obtain heap memory contents via a crafted HTML page.

A use after free in printing in Google Chrome prior to 57.0.2987.133 for Linux and Windows allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.

Insufficient validation of untrusted input in Skia in Google Chrome prior to 59.0.3071.86 for Linux, Windows, and Mac, and 59.0.3071.92 for Android, allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page.

Data leak in Canvas in Google Chrome prior to 99.0.4844.51 allowed a remote attacker who convinced a user to engage in screen sharing to potentially leak cross-origin data via a crafted HTML page.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock() Function ubifs_wbuf_write_nolock() may access buf out of bounds in following process: ubifs_wbuf_write_nolock(): aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096 if (aligned_len <= wbuf->avail) ... // Not satisfy if (wbuf->used) { ubifs_leb_write() // Fill some data in avail wbuf len -= wbuf->avail; // len is still not 8-bytes aligned aligned_len -= wbuf->avail; } n = aligned_len >> c->max_write_shift; if (n) { n <<= c->max_write_shift; err = ubifs_leb_write(c, wbuf->lnum, buf + written, wbuf->offs, n); // n > len, read out of bounds less than 8(n-len) bytes } , which can be catched by KASAN: ========================================================= BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0 Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128 Workqueue: writeback wb_workfn (flush-ubifs_0_0) Call Trace: kasan_report.cold+0x81/0x165 nand_write_page_swecc+0xa9/0x160 ubifs_leb_write+0xf2/0x1b0 [ubifs] ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs] write_head+0xdc/0x1c0 [ubifs] ubifs_jnl_write_inode+0x627/0x960 [ubifs] wb_workfn+0x8af/0xb80 Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8 bytes aligned, the 'len' represents the true length of buf (which is allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully to write leb safely. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect() KASAN reports the following issue: BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm] Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798 CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- --- Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x130 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] __kasan_report.cold+0x7f/0x114 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kasan_report+0x38/0x50 kasan_check_range+0xf5/0x1d0 kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm] ? kvm_arch_exit+0x110/0x110 [kvm] ? sched_clock+0x5/0x10 ioapic_write_indirect+0x59f/0x9e0 [kvm] ? static_obj+0xc0/0xc0 ? __lock_acquired+0x1d2/0x8c0 ? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm] The problem appears to be that 'vcpu_bitmap' is allocated as a single long on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear the lower 16 bits of it with bitmap_zero() for no particular reason (my guess would be that 'bitmap' and 'vcpu_bitmap' variables in kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed 16-bit long, the later should accommodate all possible vCPUs).

Adobe Flash Player versions 25.0.0.127 and earlier have an exploitable memory corruption vulnerability in the ActionScript2 code parser. Successful exploitation could lead to arbitrary code execution.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: refactor malicious adv data check Check for out-of-bound read was being performed at the end of while num_reports loop, and would fill journal with false positives. Added check to beginning of loop processing so that it doesn't get checked after ptr has been advanced.

In the Linux kernel, the following vulnerability has been resolved: vduse: check that offset is within bounds in get_config() This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe.

In the Linux kernel, the following vulnerability has been resolved: ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111 The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111. When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx]; There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops. The patch is NOT tested with real device. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0

In the Linux kernel, the following vulnerability has been resolved: kvm: avoid speculation-based attacks from out-of-range memslot accesses KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's ---truncated---

In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Don't generate an interrupt on bus reset Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction.

In the Linux kernel, the following vulnerability has been resolved: NFS: fs_context: validate UDP retrans to prevent shift out-of-bounds Fix shift out-of-bounds in xprt_calc_majortimeo(). This is caused by a garbage timeout (retrans) mount option being passed to nfs mount, in this case from syzkaller. If the protocol is XPRT_TRANSPORT_UDP, then 'retrans' is a shift value for a 64-bit long integer, so 'retrans' cannot be >= 64. If it is >= 64, fail the mount and return an error.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix OOB Read in qrtr_endpoint_post Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object.

In the Linux kernel, the following vulnerability has been resolved: sch_cake: Fix out of bounds when parsing TCP options and header The TCP option parser in cake qdisc (cake_get_tcpopt and cake_tcph_may_drop) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP header. Although it wasn't strictly an out-of-bounds access (memory was allocated), garbage values could be read where CAKE expected the TCP header if doff was smaller than 5.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Calling tps6598x_block_read with a higher than allowed len can be handled by just returning an error. There's no need to crash systems with panic-on-warn enabled.

In the Linux kernel, the following vulnerability has been resolved: net: validate lwtstate->data before returning from skb_tunnel_info() skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ]

In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer() commit 6f755e85c332 ("coresight: Add helper for inserting synchronization packets") removed trailing '\0' from barrier_pkt array and updated the call sites like etb_update_buffer() to have proper checks for barrier_pkt size before read but missed updating tmc_update_etf_buffer() which still reads barrier_pkt past the array size resulting in KASAN out-of-bounds bug. Fix this by adding a check for barrier_pkt size before accessing like it is done in etb_update_buffer(). BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698 Read of size 4 at addr ffffffd05b7d1030 by task perf/2629 Call trace: dump_backtrace+0x0/0x27c show_stack+0x20/0x2c dump_stack+0x11c/0x188 print_address_description+0x3c/0x4a4 __kasan_report+0x140/0x164 kasan_report+0x10/0x18 __asan_report_load4_noabort+0x1c/0x24 tmc_update_etf_buffer+0x4b8/0x698 etm_event_stop+0x248/0x2d8 etm_event_del+0x20/0x2c event_sched_out+0x214/0x6f0 group_sched_out+0xd0/0x270 ctx_sched_out+0x2ec/0x518 __perf_event_task_sched_out+0x4fc/0xe6c __schedule+0x1094/0x16a0 preempt_schedule_irq+0x88/0x170 arm64_preempt_schedule_irq+0xf0/0x18c el1_irq+0xe8/0x180 perf_event_exec+0x4d8/0x56c setup_new_exec+0x204/0x400 load_elf_binary+0x72c/0x18c0 search_binary_handler+0x13c/0x420 load_script+0x500/0x6c4 search_binary_handler+0x13c/0x420 exec_binprm+0x118/0x654 __do_execve_file+0x77c/0xba4 __arm64_compat_sys_execve+0x98/0xac el0_svc_common+0x1f8/0x5e0 el0_svc_compat_handler+0x84/0xb0 el0_svc_compat+0x10/0x50 The buggy address belongs to the variable: barrier_pkt+0x10/0x40 Memory state around the buggy address: ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03 ^ ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa ==================================================================

In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options.").

Out of bounds memory access in V8 in Google Chrome prior to 144.0.7559.59 allowed a remote attacker to potentially exploit object corruption via a crafted HTML page. (Chromium security severity: High)

In the Linux kernel, the following vulnerability has been resolved: media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4 commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") introduced retrieval of the PDOs when connected to a PD-capable source. But only the first 4 PDOs are received since that is the maximum number that can be fetched at a time given the MESSAGE_IN length limitation (16 bytes). However, as per the PD spec a connected source may advertise up to a maximum of 7 PDOs. If such a source is connected it's possible the PPM could have negotiated a power contract with one of the PDOs at index greater than 4, and would be reflected in the request data object's (RDO) object position field. This would result in an out-of-bounds access when the rdo_index() is used to index into the src_pdos array in ucsi_psy_get_voltage_now(). With the help of the UBSAN -fsanitize=array-bounds checker enabled this exact issue is revealed when connecting to a PD source adapter that advertise 5 PDOs and the PPM enters a contract having selected the 5th one. [ 151.545106][ T70] Unexpected kernel BRK exception at EL1 [ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP ... [ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c [ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328 ... [ 151.545542][ T70] Call trace: [ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c [ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0 [ 151.545550][ T70] dev_uevent+0x200/0x384 [ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8 [ 151.545557][ T70] power_supply_changed_work+0x174/0x31c [ 151.545562][ T70] process_one_work+0x244/0x6f0 [ 151.545564][ T70] worker_thread+0x3e0/0xa64 We can resolve this by instead retrieving and storing up to the maximum of 7 PDOs in the con->src_pdos array. This would involve two calls to the GET_PDOS command.

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: Fix out of bounds when parsing TCP options The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix UBSAN shift-out-of-bounds warning If get_num_sdma_queues or get_num_xgmi_sdma_queues is 0, we end up doing a shift operation where the number of bits shifted equals number of bits in the operand. This behaviour is undefined. Set num_sdma_queues or num_xgmi_sdma_queues to ULLONG_MAX, if the count is >= number of bits in the operand. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1472

An issue was discovered in the Linux kernel before 5.14.15. There is an array-index-out-of-bounds flaw in the detach_capi_ctr function in drivers/isdn/capi/kcapi.c.

In wlan, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07588569; Issue ID: ALPS07628518.

In the Linux kernel, the following vulnerability has been resolved: bpf: Add the missing BPF_LINK_TYPE invocation for sockmap There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for sockmap link Also add comments for bpf_link_type to prevent missing updates in the future.