CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555.

Unspecified vulnerability in the SNMPv2c implementation in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv1 packet.

Cisco Email Security Appliance (ESA) 8.5.6-106 and 9.6.0-042 allows remote authenticated users to cause a denial of service (file-descriptor consumption and device reload) via crafted HTTP requests, aka Bug ID CSCuw32211.

Memory leak in Cisco IOS 12.2 in the Performance Routing Engine (PRE) module on uBR10000 devices allows remote authenticated users to cause a denial of service (memory consumption or PXF process crash) by sending docsIfMCmtsMib SNMP requests quickly, aka Bug ID CSCue65051.

The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601.

Cisco NX-OS on Nexus 9000 devices 11.1(1c) allows remote authenticated users to cause a denial of service (device hang) via large files that are copied to a device's filesystem, aka Bug ID CSCuu77225.

The RADIUS implementation in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted IPv6 Attributes in Access-Accept packets, aka Bug IDs CSCur84322 and CSCur27693.

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an unexpected reload of the device. This vulnerability is due to insufficient input validation of SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device using IPv4 or IPv6. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects all versions of SNMP (versions 1, 2c, and 3) and requires a valid SNMP community string or valid SNMPv3 user credentials.

A vulnerability in the session authentication functionality of the Remote Access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to prevent users from authenticating. This vulnerability is due to insufficient entropy in the authentication process. An attacker could exploit this vulnerability by determining the handle of an authenticating user and using it to terminate their authentication session. A successful exploit could allow the attacker to force a user to restart the authentication process, preventing a legitimate user from establishing remote access VPN sessions.

A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap overflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic.

A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device. This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

The server in Cisco Unity Connection allows remote authenticated users to cause a denial of service (CPU consumption) via unspecified IMAP commands, aka Bug ID CSCul49976.

A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.

A vulnerability in the software cryptography module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker or an unauthenticated attacker in a man-in-the-middle position to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error in how the software cryptography module handles specific types of decryption errors. An attacker could exploit this vulnerability by sending malicious packets over an established IPsec connection. A successful exploit could cause the device to crash, forcing it to reload. Important: Successful exploitation of this vulnerability would not cause a compromise of any encrypted data. Note: This vulnerability affects only Cisco ASA Software Release 9.16.1 and Cisco FTD Software Release 7.0.0.

A vulnerability in the REST API of Cisco Managed Services Accelerator (MSX) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the way that the affected software logs certain API requests. An attacker could exploit this vulnerability by sending a flood of crafted API requests to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the XML parser code of Cisco Firepower Device Manager On-Box software could allow an authenticated, remote attacker to cause an affected system to become unstable or reload. The vulnerability is due to insufficient hardening of the XML parser configuration. An attacker could exploit this vulnerability in multiple ways using a malicious file: An attacker with administrative privileges could upload a malicious XML file on the system and cause the XML code to parse the malicious file. An attacker with Clientless Secure Sockets Layer (SSL) VPN access could exploit this vulnerability by sending a crafted XML file. A successful exploit would allow the attacker to crash the XML parser process, which could cause system instability, memory exhaustion, and in some cases lead to a reload of the affected system.

A vulnerability in Cisco Enterprise Network Functions Virtualization Infrastructure Software (NFVIS) could allow an authenticated, remote attacker with administrator privileges to overwrite files on the underlying operating system (OS) of an affected device. The vulnerability is due to improper input validation in an NFVIS file-system command. An attacker could exploit this vulnerability by using crafted variables during the execution of an affected command. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying OS.

STCAPP (aka the SCCP telephony control application) on Cisco IOS before 15.0(1)XA1 does not properly handle multiple calls to a shared line, which allows remote attackers to cause a denial of service (port hang) by simultaneously ending two calls that were controlled by CallManager Express (CME), aka Bug ID CSCtd42552.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.

A vulnerability in the Object Linking & Embedding (OLE2) file scanning functionality of Clam AntiVirus (ClamAV) Software versions 0.101.1 and prior could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to a lack of proper input and validation checking mechanisms for OLE2 files sent an affected device. An attacker could exploit this vulnerability by sending malformed OLE2 files to the device running an affected version ClamAV Software. An exploit could allow the attacker to cause an out-of-bounds write condition, resulting in a crash that could result in a denial of service condition on an affected device.

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying various CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code. The vulnerability exists because the software improperly validates user-supplied input during user authentication. An attacker could exploit this vulnerability by connecting to an affected device using HTTP and supplying malicious user credentials. A successful exploit could allow the attacker to trigger a reload of an affected device, resulting in a DoS condition, or to execute arbitrary code with the privileges of the app user. Cisco fixed this vulnerability in the following SIP Software releases: 10.3(1)SR5 and later for Cisco Unified IP Conference Phone 8831; 11.0(4)SR3 and later for Cisco Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 and later for the rest of the Cisco IP Phone 7800 Series and 8800 Series.

Unspecified vulnerability in the SunRPC inspection feature on the Cisco Firewall Services Module (FWSM) with software 3.1 before 3.1(17.2), 3.2 before 3.2(16.1), 4.0 before 4.0(10.1), and 4.1 before 4.1(1.1) for Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via crafted SunRPC messages, aka Bug ID CSCte61622.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability are due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the HTTPS decryption feature of Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Secure Sockets Layer (SSL) server certificates. An attacker could exploit this vulnerability by installing a malformed certificate in a web server and sending a request to it through the Cisco WSA. A successful exploit could allow the attacker to cause an unexpected restart of the proxy process on an affected device.

A vulnerability in the application programming interface (API) of Cisco Smart Software Manager On-Prem could allow an unauthenticated, remote attacker to change user account information which can prevent users from logging in, resulting in a denial of service (DoS) condition of the web interface. The vulnerability is due to the lack of input validation in the API. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to change or corrupt user account information which could grant the attacker administrator access or prevent legitimate user access to the web interface, resulting in a denial of service (DoS) condition.

Cisco IOS 15.1(2)T allows remote attackers to cause a denial of service (resource consumption and TCP outage) via spoofed TCP packets, related to embryonic TCP connections that remain in the SYN_RCVD or SYN_SENT state, aka Bug ID CSCti18193.

The Presence Engine (PE) service in Cisco Unified Presence 6.x before 6.0(7) and 7.x before 7.0(8) does not properly handle an erroneous Contact field in the header of a SIP SUBSCRIBE message, which allows remote attackers to cause a denial of service (process failure) via a malformed message, aka Bug ID CSCtd39629.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S11 and 9.7(3)P before 9.7(3)P11 allows remote attackers to cause a denial of service (device crash) via a long message, aka Bug ID CSCsk44115.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsk04588.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed Contact header, aka Bug ID CSCsj98521.

Cisco Prime Network Services Controller 3.0 allows local users to bypass intended access restrictions and execute arbitrary commands via additional parameters to an unspecified command, aka Bug ID CSCus99427.

The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.8(1)S5 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsz13590.

The USB driver in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows physically proximate attackers to cause a denial of service via a crafted USB device that triggers invalid USB commands, aka Bug ID CSCux10531.

The rule-update feature in Cisco FireSIGHT Management Center (MC) 5.2 through 5.4.0.1 does not verify the X.509 certificate of the support.sourcefire.com SSL server, which allows man-in-the-middle attackers to spoof this server and provide an invalid package, and consequently execute arbitrary code, via a crafted certificate, aka Bug ID CSCuw06444.

Cisco AsyncOS before 8.5.7-043, 9.x before 9.1.1-023, and 9.5.x and 9.6.x before 9.6.0-046 on Email Security Appliance (ESA) devices mishandles malformed fields during body-contains, attachment-contains, every-attachment-contains, attachment-binary-contains, dictionary-match, and attachment-dictionary-match filtering, which allows remote attackers to cause a denial of service (memory consumption) via a crafted attachment in an e-mail message, aka Bug ID CSCuv47151.

The web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices does not properly restrict use of IFRAME elements, which makes it easier for remote attackers to conduct clickjacking attacks and unspecified other attacks via a crafted web site, aka Bug ID CSCux10604.

Cisco Emergency Responder 10.5(3.10000.9) allows remote attackers to upload files to arbitrary locations via a crafted parameter, aka Bug ID CSCuv25501.

Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645.

Cisco IOS 15.2(04)M and 15.4(03)M lets physical-interface ACLs supersede virtual PPP interface ACLs, which allows remote authenticated users to bypass intended network-traffic restrictions in opportunistic circumstances by using PPP, aka Bug ID CSCur61303.

Cisco TFTP Server 1.1 allows remote attackers to cause a denial of service (daemon crash) via a crafted (1) read (aka RRQ) or (2) write (aka WRQ) request, or other TFTP packet. NOTE: some of these details are obtained from third party information.

Cisco ASR 5000 devices with software 19.0.M0.60828 allow remote attackers to cause a denial of service (OSPF process restart) via crafted length fields in headers of OSPF packets, aka Bug ID CSCuv62820.

Cisco IOS XE 2.x and 3.x before 3.10.6S, 3.11.xS through 3.13.xS before 3.13.3S, and 3.14.xS through 3.15.xS before 3.15.1S allows remote attackers to cause a denial of service (device reload) via IPv4 packets that require NAT and MPLS actions, aka Bug ID CSCut96933.

The JavaServer Pages (JSP) component in Cisco Integrated Management Controller (IMC) Supervisor before 1.0.0.1 and UCS Director (formerly Cloupia Unified Infrastructure Controller) before 5.2.0.1 allows remote attackers to write to arbitrary files via crafted HTTP requests, aka Bug IDs CSCus36435 and CSCus62625.