A vulnerability was found in Thecosy IceCMS 2.0.1. It has been classified as problematic. Affected is an unknown function of the file /login of the component Captcha Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-247884.

EuroTel ETL3100 versions v01c01 and v01x37 does not limit the number of attempts to guess administrative credentials in remote password attacks to gain full control of the system.

Sielco PolyEco1000 uses a weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. There is no bruteforce protection (e.g., lockout) established. An attacker might be able to bruteforce the password to authenticate on the device.

In Omron PLC CS series, all versions, Omron PLC CJ series, all versions, and Omron PLC NJ series, all versions, the software does not implement sufficient measures to prevent multiple failed authentication attempts within in a short time frame, making it more susceptible to brute force attacks.

Advantech Spectre RT ERT351 Versions 5.1.3 and prior has insufficient login authentication parameters required for the web application may allow an attacker to gain full access using a brute-force password attack.

bl-kernel/security.class.php in Bludit 3.9.2 allows attackers to bypass a brute-force protection mechanism by using many different forged X-Forwarded-For or Client-IP HTTP headers.

An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. The Authentication mechanism has no brute-force prevention.

phpMyFAQ before 2.9.8 does not properly mitigate brute-force attacks that try many passwords in attempted logins quickly.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Mail Login allows Brute Force.This issue affects Mail Login: from 3.0.0 before 3.2.0, from 4.0.0 before 4.2.0.

AutoPi Wi-Fi/NB and 4G/LTE devices before 2019-10-15 allows an attacker to perform a brute-force attack or dictionary attack to gain access to the WiFi network, which provides root access to the device. The default WiFi password and WiFi SSID are derived from the same hash function output (input is only 8 characters), which allows an attacker to deduce the WiFi password from the WiFi SSID.

A brute-force protection bypass in CAPTCHA protection in ASUS ROG Rapture GT-AX11000, RT-AX3000, RT-AX55, RT-AX56U, RT-AX56U_V2, RT-AX58U, RT-AX82U, RT-AX82U GUNDAM EDITION, RT-AX86 Series(RT-AX86U/RT-AX86S), RT-AX86U ZAKU II EDITION, RT-AX88U, RT-AX92U, TUF Gaming AX3000, TUF Gaming AX5400 (TUF-AX5400), ASUS ZenWiFi XD6, ASUS ZenWiFi AX (XT8) before 3.0.0.4.386.45898, and RT-AX68U before 3.0.0.4.386.45911, allows a remote attacker to attempt any number of login attempts via sending a specific HTTP request.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have has no account lockout policy configured for the login page of the product. This may allow an attacker to execute a brute-force password attack with no time limitation and without harming the normal operation of the user. This could allow an attacker to gain valid credentials for the product interface.

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 2023.Q1.1223.

DECISO OPNsense 23.1 does not impose rate limits for authentication, allowing attackers to perform a brute-force attack to bypass authentication.

Improper restriction of excessive authentication attempts in the SSHGuard component of Netgate pfSense Plus software v22.05.1 and pfSense CE software v2.6.0 allows attackers to bypass brute force protection mechanisms via crafted web requests.

IBM Tivoli Key Lifecycle Manager 3.0.1 and 4.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 184156.

Improper Restriction of Excessive Authentication Attempts in GitHub repository azuracast/azuracast prior to 0.18.3.

Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS.

An Improper Restriction of Excessive Authentication Attempts issue was discovered in Belden Hirschmann RS, RSR, RSB, MACH100, MACH1000, MACH4000, MS, and OCTOPUS Classic Platform Switches. An improper restriction of excessive authentication vulnerability in the web interface has been identified, which may allow an attacker to brute force authentication.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V2.0 SP1). The web interface has no means to prevent password guessing attacks. The vulnerability could be exploited by an attacker with network access to the vulnerable software, requiring no privileges and no user interaction. The vulnerability could allow full access to the web interface. At the time of advisory publication no public exploitation of this security vulnerability was known.

A lack of rate limiting on the password reset endpoint of Chamberlain myQ v5.222.0.32277 (on iOS) allows attackers to compromise user accounts via a bruteforce attack.

Ricoh SP C250DN 1.05 devices have an Authentication Method Vulnerable to Brute Force Attacks. Some Ricoh printers did not implement account lockout. Therefore, it was possible to obtain the local account credentials by brute force.

Microsoft Exchange Server Elevation of Privilege Vulnerability

index.php?r=site%2Flogin in EduSec through 4.2.6 does not restrict sending a series of LoginForm[username] and LoginForm[password] parameters, which might make it easier for remote attackers to obtain access via a brute-force approach.

An issue was discovered in /cgi-bin/luci on Teltonika RTU9XX (e.g., RUT950) R_31.04.89 before R_00.05.00.5 devices. The authentication functionality is not protected from automated tools used to make login attempts to the application. An anonymous attacker has the ability to make unlimited login attempts with an automated tool. This ability could lead to cracking a targeted user's password.

Insufficiently Protected Credentials vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access of when credentials are discovered after a brute force attack.

Server-Side Request Forgery (SSRF), Improperly Controlled Modification of Dynamically-Determined Object Attributes, Improper Restriction of Excessive Authentication Attempts vulnerability in YugaByte, Inc. Yugabyte Managed allows Accessing Functionality Not Properly Constrained by ACLs, Communication Channel Manipulation, Authentication Abuse.This issue affects Yugabyte Managed: from 2.0.0.0 through 2.13.0.0

BlackVue DR750-2CH LTE v.1.012_2022.10.26 was discovered to contain a weak default passphrase which can be easily cracked via a brute force attack if the WPA2 handshake is intercepted.

IBM BigFix Platform 9.2 and 9.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 140756.

A CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to gain full access by brute force.

A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.

Snap One Wattbox WB-300-IP-3 versions WB10.9a17 and prior could bypass the brute force protection, allowing multiple attempts to force a login.

Improper Restriction of Excessive Authentication Attempts in GitHub repository usememos/memos prior to 0.9.1.

HCL AppScan Standard is vulnerable to excessive authorization attempts

Improper Restriction of Excessive Authentication Attempts in GitHub repository linagora/twake prior to 0.0.0.

LimitLoginAttempts.php in the limit-login-attempts-reloaded plugin before 2.17.4 for WordPress allows a bypass of (per IP address) rate limits because the X-Forwarded-For header can be forged. When the plugin is configured to accept an arbitrary header for the client source IP address, a malicious user is not limited to perform a brute force attack, because the client IP header accepts any arbitrary string. When randomizing the header input, the login count does not ever reach the maximum allowed retries.

Dell RecoverPoint for Virtual Machines 5.3.x, 6.0.SP1 contains a brute force/dictionary attack vulnerability. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to launch a brute force attack or a dictionary attack against the RecoverPoint login form. This allows attackers to brute-force the password of valid users in an automated manner.

An improper restriction of excessive authentication attempts [CWE-307] in FortiClientEMS version 7.2.0 through 7.2.4 and before 7.0.10 allows an unauthenticated attacker to try a brute force attack against the FortiClientEMS console via crafted HTTP or HTTPS requests.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists in PLC Simulator on EcoStruxureª Control Expert (now Unity Pro) (all versions) that could cause unauthorized command execution when a brute force attack is done over Modbus.

RAGFlow through 0.18.1 allows account takeover because it is possible to conduct successful brute-force attacks against email verification codes to perform arbitrary account registration, login, and password reset. Codes are six digits and there is no rate limiting.

An issue in GX Group GPON ONT Titanium 2122A T2122-V1.26EXL allows attackers to escalate privileges via a brute force attack at the login page.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 137773.

BookWyrm is a social network for tracking reading. Versions prior to 0.4.5 were found to lack rate limiting on authentication views which allows brute-force attacks. This issue has been patched in version 0.4.5. Admins with existing instances will need to update their `nginx.conf` file that was created when the instance was set up. Users are advised advised to upgrade. Users unable to upgrade may update their nginx.conf files with the changes manually.

An improper restriction of excessive authentication attempts vulnerability [CWE-307] in FortiTester Telnet port 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated attacker to guess the credentials of an admin user via a brute force attack.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow an attacker to manipulate the admin after numerous attempts at guessing credentials. Affected Product: spaceLYnk (V2.6.2 and prior), Wiser for KNX (formerly homeLYnk) (V2.6.2 and prior), fellerLYnk (V2.6.2 and prior)