An issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain control of the device via the change password functionality as it does not prompt for the current password.

Cross Site Request Forgery (CSRF) vulnerability in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain control of the device via crafted GET request to /man_password.htm.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges on the device via poor credential management.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to run arbitrary commands via use of a crafted string in the ping utility.

An Insecure Credential Management issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via use of weak hashing algorithm.

Incorrect Authorization vulnerability in Wpsoul Greenshift – animation and page builder blocks allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Greenshift – animation and page builder blocks: from n/a through 9.7.

WTCMS 1.0 is vulnerable to Incorrect Access Control in \Common\Controller\HomebaseController.class.php.

OpenFGA is a high-performance authorization/permission engine inspired by Google Zanzibar. Versions prior to 0.2.5 are vulnerable to authorization bypass under certain conditions. You are affected by this vulnerability if you added a tuple with a wildcard (*) assigned to a tupleset relation (the right hand side of a ‘from’ statement). This issue has been patched in version v0.2.5. This update is not backward compatible with any authorization model that uses wildcard on a tupleset relation.

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass for HTTP multipart requests by submitting a payload that uses a character encoding scheme via the Content-Type or the deprecated Content-Transfer-Encoding multipart MIME header fields that will not be decoded and inspected by the web application firewall engine and the rule set. The multipart payload will therefore bypass detection. A vulnerable backend that supports these encoding schemes can potentially be exploited. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised upgrade to 3.2.2 and 3.3.3 respectively. The mitigation against these vulnerabilities depends on the installation of the latest ModSecurity version (v2.9.6 / v3.0.8).

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass by submitting a specially crafted HTTP Content-Type header field that indicates multiple character encoding schemes. A vulnerable back-end can potentially be exploited by declaring multiple Content-Type "charset" names and therefore bypassing the configurable CRS Content-Type header "charset" allow list. An encoded payload can bypass CRS detection this way and may then be decoded by the backend. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively.

This vulnerability exists in the Wave 2.0 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user OTP, MPIN or password, which could lead to gain unauthorized access and compromise other user accounts.

Improper Restriction of Excessive Authentication Attempts in GitHub repository kareadita/kavita prior to 0.6.0.3.

@keystone-6/core is a core package for Keystone 6, a content management system for Node.js. Starting with version 2.2.0 and prior to version 2.3.1, users who expected their `multiselect` fields to use the field-level access control - if configured - are vulnerable to their field-level access control not being used. List-level access control is not affected. Field-level access control for fields other than `multiselect` are not affected. Version 2.3.1 contains a fix for this issue. As a workaround, stop using the `multiselect` field.

This vulnerability exists in Reedos aiM-Star version 2.0.1 due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack against legitimate user passwords, which could lead to gain unauthorized access and compromise other user accounts.

An issue in the BYD Dilink Headunit System v3.0 to v4.0 allows attackers to bypass authentication via a bruteforce attack.

Impact varies for each individual vulnerability in the application. For generation of accounts, it may be possible, depending on the amount of system resources available, to create a DoS event in the server. These accounts still need to be activated; however, it is possible to identify the output Status Code to separate accounts that are generated and waiting for email verification. \n\nFor the sign in directories, it is possible to brute force login attempts to either login portal, which could lead to account compromise.

Pebble Templates 3.1.5 allows attackers to bypass a protection mechanism and implement arbitrary code execution with springbok. NOTE: the vendor disputes this because input to the Pebble templating engine is intended to include arbitrary Java code, and thus either the input should not arrive from an untrusted source, or else the application using the engine should apply restrictions to the input. The engine is not responsible for validating the input.

An Incorrect Access Control issue in SAMPMAX com.sampmax.homemax 2.1.2.7 allows a remote attacker to obtain sensitive information via the firmware update process.

Incorrect access control in TOTOLINK N350RT V9.3.5u.6139_B20201216 allows attackers to obtain the apmib configuration file, which contains the username and the password, via a crafted request to /cgi-bin/ExportSettings.sh.

OpenFGA is an authorization/permission engine. OpenFGA v1.5.7 and v1.5.8 are vulnerable to authorization bypass when calling Check API with a model that uses `but not` and `from` expressions and a userset. Users should downgrade to v1.5.6 as soon as possible. This downgrade is backward compatible. As of time of publication, a patch is not available but OpenFGA's maintainers are planning a patch for inclusion in a future release.

Lylme Spage v1.9.5 is vulnerable to Incorrect Access Control. There is no limit on the number of login attempts, and the verification code will not be refreshed after a failed login, which allows attackers to blast the username and password and log into the system backend.

Meshtastic is an open source, off-grid, decentralized, mesh network. Meshtastic uses MQTT to communicate over an internet connection to a shared or private MQTT Server. Nodes can communicate directly via an internet connection or proxied through a connected phone (i.e., via bluetooth). Prior to version 2.5.1, multiple weaknesses in the MQTT implementation allow for authentication and authorization bypasses resulting in unauthorized control of MQTT-connected nodes. Version 2.5.1 contains a patch.

Money Manager EX WebApp (web-money-manager-ex) 1.2.2 is vulnerable to Incorrect Access Control. The `redirect_if_not_loggedin` function in `functions_security.php` fails to terminate script execution after redirecting unauthenticated users. This flaw allows an unauthenticated attacker to upload arbitrary files, potentially leading to Remote Code Execution.

In lunary-ai/lunary version v1.2.13, an incorrect authorization vulnerability exists that allows unauthorized users to access and manipulate projects within an organization they should not have access to. Specifically, the vulnerability is located in the `checkProjectAccess` method within the authorization middleware, which fails to adequately verify if a user has the correct permissions to access a specific project. Instead, it only checks if the user is part of the organization owning the project, overlooking the necessary check against the `account_project` table for explicit project access rights. This flaw enables attackers to gain complete control over all resources within a project, including the ability to create, update, read, and delete any resource, compromising the privacy and security of sensitive information.

Zammad 5.2.0 is vulnerable to privilege escalation. Zammad has a prevention against brute-force attacks trying to guess login credentials. After a configurable amount of attempts, users are invalidated and logins prevented. An attacker might work around this prevention, enabling them to send more than the configured amount of requests before the user invalidation takes place.

An improper restriction of excessive authentication attempts vulnerability [CWE-307] in FortiTester Telnet port 2.3.0 through 3.9.1, 4.0.0 through 4.2.0, 7.0.0 through 7.1.0 may allow an unauthenticated attacker to guess the credentials of an admin user via a brute force attack.

This vulnerability exists in Apex Softcell LD Geo due to missing restrictions for excessive failed authentication attempts on its API based login. A remote attacker could exploit this vulnerability by conducting a brute force attack on login OTP, which could lead to gain unauthorized access to other user accounts.

A vulnerability in Kaiten version 57.131.12 and earlier allows attackers to bypass the PIN code authentication mechanism. The application requires users to input a 6-digit PIN code sent to their email for authorization after entering their login credentials. However, the request limiting mechanism can be easily bypassed, enabling attackers to perform a brute force attack to guess the correct PIN and gain unauthorized access to the application.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a remote code execution (RCE) vulnerability.

app/Controller/UserLoginProfilesController.php in MISP before 2.4.198 does not prevent an org admin from viewing sensitive login fields of another org admin in the same org.

An access control issue in Ingredient Stock Management System v1.0 allows attackers to take over user accounts via a crafted POST request to /isms/classes/Users.php.

Zimbra Collaboration Open Source 8.8.15 does not encrypt the initial-login randomly created password (from the "zmprove ca" command). It is visible in cleartext on port UDP 514 (aka the syslog port). NOTE: a third party reports that this cannot be reproduced.

In MISP through 2.4.196, app/Controller/BookmarksController.php does not properly restrict access to bookmarks data in the case where the user is not an org admin.

An issue in TopIDP3000 Topsec Operating System tos_3.3.005.665b.15_smpidp allows attackers to perform a brute-force attack via a crafted session_id cookie.

Improper Authentication vulnerability in Apache Solr. Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass. A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path. This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing. This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0. Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue.

Dell EMC XtremIO versions prior to X2 6.4.0-22 contain a bruteforce vulnerability. A remote unauthenticated attacker can potentially exploit this vulnerability and gain access to an admin account.

Insecure permissions in fabedge v0.8.1 allows attackers to access sensitive data and escalate privileges by obtaining the service account's token.

Dell EMC PowerStore, contain(s) an Improper Restriction of Excessive Authentication Attempts Vulnerability in PowerStore Manager GUI. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to password brute-forcing. Account takeover is possible if weak passwords are used by users.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

OpenFGA is a high-performance and flexible authorization/permission engine. Some end users of OpenFGA v1.5.0 or later are vulnerable to authorization bypass when calling Check or ListObjects APIs. You are very likely affected if your model involves exclusion (e.g. `a but not b`) or intersection (e.g. `a and b`). This vulnerability is fixed in v1.5.3.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow unauthorized access when an attacker uses brute force. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)

In ExtremeGuest Essentials before 25.5.0, captive-portal may permit unauthorized access via manual brute-force procedure. Under certain ExtremeGuest Essentials captive-portal SSID configurations, repeated manual login attempts may allow an unauthenticated device to be marked as authenticated and obtain network access. Client360 logs may display the client MAC as the username despite no MAC-authentication being enabled.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Improper Restriction of Excessive Authentication Attempts vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Abuse.This issue affects upKeeper Manager: through 5.1.9.

Pluck CMS 4.7.18 does not restrict failed login attempts, allowing attackers to execute a brute force attack.

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. In addition to running containers as build steps, BuildKit also provides APIs for running interactive containers based on built images. It was possible to use these APIs to ask BuildKit to run a container with elevated privileges. Normally, running such containers is only allowed if special `security.insecure` entitlement is enabled both by buildkitd configuration and allowed by the user initializing the build request. The issue has been fixed in v0.12.5 . Avoid using BuildKit frontends from untrusted sources.

Dell Unity, Dell UnityVSA, and Dell Unity XT versions before 5.2.0.0.5.173 do not restrict excessive authentication attempts in Unisphere GUI. A remote unauthenticated attacker may potentially exploit this vulnerability to brute-force passwords and gain access to the system as the victim. Account takeover is possible if weak passwords are used by users.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-15854.

CasaOS-UserService provides user management functionalities to CasaOS. Starting in version 0.4.4.3 and prior to version 0.4.7, CasaOS doesn't defend against password brute force attacks, which leads to having full access to the server. The web application lacks control over the login attempts. This vulnerability allows attackers to get super user-level access over the server. Version 0.4.7 contains a patch for this issue.

User login brute force protection functionality bypass