Adobe Campaign version 21.2.1 (and earlier) is affected by a Path Traversal vulnerability that could lead to reading arbitrary server files. By leveraging an exposed XML file, an unauthenticated attacker can enumerate other files on the server.

IBM SAN Volume Controller, IBM Storwize, IBM FlashSystem and IBM Storage Virtualize 8.3 products use default passwords for a privileged user. IBM X-Force ID: 266874.

A kernel data leak due to an out-of-bound read was found in the Linux kernel in inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() functions present since version 4.7-rc1 through version 4.13. A data leak happens when these functions fill in sockaddr data structures used to export socket's diagnostic information. As a result, up to 100 bytes of the slab data could be leaked to a userspace.

Broadcom RAID Controller Web server (nginx) is serving private server-side files without any authentication on Linux

IBM Storage Virtualize vSphere Remote Plug-in 1.0 and 1.1 could allow a remote user to obtain sensitive credential information after deployment.

Excessive attack surface due to binding to an unrestricted IP address. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 30430, Acronis Cyber Protect 15 (Linux, macOS, Windows) before build 35979.

IBM Spectrum Protect Operations Center 7.1, under special configurations, could allow a local user to obtain highly sensitive information. IBM X-Force ID: 209610.

IBM Spectrum Copy Data Management 2.2.13 and earlier could allow a remote attacker to obtain sensitive information, caused by the improper handling of requests for Spectrum Copy Data Management Admin Console. By sending a specially-crafted request, a remote attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 214524.

IBM Sterling Connect:Direct for UNIX 1.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210574.

IBM Sterling Connect:Direct Web Services 1.0 and 6.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 209507.

IBM PowerVM Hypervisor FW860, FW940, FW950, and FW1010, through a specific sequence of VM management operations could lead to a violation of the isolation between peer VMs. IBM X-Force ID: 210019.

IBM Cognos Controller 10.4.1, 10.4.2, and 11.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 264939.

IBM System Storage DS8000 Management Console (HMC) R8.5 88.5x.x.x, R9.1 89.1x.0.0, and R9.2 89.2x.0.0 could allow a remote attacker to obtain sensitive information through unpublished URLs. IBM X-Force ID: 210330.

IBM Maximo Asset Management 7.6.1.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 210892.

IBM MQ Appliance could allow a local attacker to obtain sensitive information by inclusion of sensitive data within trace.

IBM Spectrum Copy Data Management 2.2.13 and earlier uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 214617.

IBM API Connect 2018.4.1.7 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 168510.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 Admin Console could allow a remote attacker to obtain sensitive information when a specially crafted url causes a stack trace to be dumped. IBM X-Force ID: 160202.

IBM Guardium Data Encryption (GDE) 4.0.0 and 5.0.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 213860.

IBM Cloud Pak System 2.3.3.6, 2.3.36 iFix1, 2.3.3.6 iFix2, 2.3.3.7, 2.3.3.7 iFix1, and 2.3.4.0 could disclose sensitive information about the system that could aid in further attacks against the system.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could disclose sensitive information about the system that could aid in further attacks against the system.

An out-of-bounds read vulnerability was found in Netfilter Connection Tracking (conntrack) in the Linux kernel. This flaw allows a remote user to disclose sensitive information via the DCCP protocol.

IBM API Connect 2018.1 through 2018.4.1.7 Developer Portal's user registration page does not disable password autocomplete. An attacker with access to the browser instance and local system credentials can steal the credentials used for registration. IBM X-Force ID: 163453.

IBM Maximo Asset Management 7.6.1.1 and 7.6.1.2 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 210163.

A flaw was found within the parsing of SMB2 requests that have a transform header in the kernel ksmbd module. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this to disclose sensitive information on affected installations of Linux. Only systems with ksmbd enabled are vulnerable to this CVE.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could disclose sensitive information about the system that could aid in further attacks against the system.

IBM PureApplication System 2.2.3.0 through 2.2.5.3 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 159417.

IBM Intelligent Operations Center (IOC) 5.1.0 through 5.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 157012.

An unauthorized attacker who has obtained an IBM Watson IoT Platform 1.0 security authentication token can use it to impersonate an authorized platform user. IBM X-Force ID: 261201.

IBM UrbanCode Deploy (UCD) 7.1.1.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Cloud Pak System 2.3.1.1, 2.3.2.0, and 2.3.3.7 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 260733.

IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in container images which could lead to further attacks against the system. IBM X-Force ID: 260730.

IBM Security Verify Bridge 1.0.5.0 could allow a user to obtain sensitive information due to improper certificate validation. IBM X-Force ID: 208155.

IBM CICS TX Advanced 10.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 260770.

IBM Security Access Manager Docker 10.0.0.0 through 10.0.7.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 261198.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could disclose sensitive information in HTTP responses that could aid in further attacks against the system.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.36 iFix1, 2.3.3.6 iFix2, 2.3.3.7, 2.3.3.7 iFix1, 2.3.4.0, and 2.3.4.1 could allow a user with access to the network to obtain sensitive information from CLI arguments.

IBM Spectrum Copy Data Management 2.2.13 and earlier has weak authentication and password rules and incorrectly handles default credentials for the Spectrum Copy Data Management Admin console. IBM X-Force ID: 214957.

IBM Cognos Analytics Mobile for Android 1.1.14 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM OPENBMC OP920, OP930, and OP940 could allow an unauthenticated user to obtain sensitive information. IBM X-Force ID: 212047.

IBM Security Verify 10.0.0, 10.0.1.0, and 10.0.2.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210067.

IBM Security Guardium 10.5 and 11.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive information. IBM X-Force ID: 215585.

IBM Rational Collaborative Lifecycle Management 6.0 through 6.0.6.1 could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 159883.

IBM Security Verify 10.0.0, 10.0.1.0, and 10.0.2.0 could disclose sensitive information due to hazardous input validation during QR code generation. IBM X-Force ID: 212040.

IBM Tivoli Key Lifecycle Manager 3.0, 3.0.1, 4.0, and 4.1 uses a one-way cryptographic hash against an input that should not be reversible, such as a password, but the software does not also use a salt as part of the input. IBM X-Force ID: 212785.

IBM API Connect V5.0.0.0 through 5.0.8.7iFix3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 165958.

Cleartext Transmission of Sensitive Information vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Server, Device Manager Agent, Host Data Collector components) allows Interception.This issue affects Hitachi Device Manager: before 8.8.5-02.

IBM Security Verify Governance 10.0 does not encrypt sensitive or critical information before storage or transmission. IBM X-Force ID: 256020.

IBM GSKit-Crypto could allow a remote attacker to obtain sensitive information, caused by a timing-based side channel in the RSA Decryption implementation. By sending an overly large number of trial messages for decryption, an attacker could exploit this vulnerability to obtain sensitive information.

IBM Security Verify Information Queue 10.0.4 and 10.0.5 could allow a remote attacker to obtain sensitive information that could aid in further attacks against the system. IBM X-Force ID: 256015.