A security vulnerability has been detected in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The impacted element is an unknown function of the file /wan_connection_status.asp of the component DHCP Connection Status Handler. The manipulation leads to information disclosure. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Information disclosure in the XML component. This vulnerability affects Firefox < 147 and Thunderbird < 147.

A security flaw has been discovered in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. Impacted is an unknown function of the component Wifi Setting Handler. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer out-of-bounds read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to obtain sensitive information in the Snort 3 data stream.

Information disclosure in the Networking component. This vulnerability affects Firefox < 147, Firefox ESR < 140.7, Thunderbird < 147, and Thunderbird < 140.7.

The Spectra Gutenberg Blocks – Website Builder for the Block Editor plugin for WordPress is vulnerable to Information Disclosure in all versions up to, and including, 2.19.17. This is due to the plugin failing to check `post_password_required()` before rendering post excerpts in the `render_excerpt()` function and the `uagb_get_excerpt()` helper function. This makes it possible for unauthenticated attackers to read excerpts of password-protected posts by simply viewing any page that contains a Spectra Post Grid, Post Masonry, Post Carousel, or Post Timeline block.

A vulnerability was identified in birkir prime up to 0.4.0.beta.0. This impacts an unknown function of the file /graphql of the component GraphQL Directive Handler. Such manipulation leads to information exposure through error message. The attack may be performed from remote. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.

The Universal Worklist Configuration in SAP NetWeaver AS JAVA 7.4 allows remote attackers to obtain sensitive user information via a crafted HTTP request, aka SAP Security Note 2256846.

A vulnerability was detected in birkir prime up to 0.4.0.beta.0. This issue affects some unknown processing of the file /graphql of the component GraphQL API. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

The WP Adminify plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.0.7.7 via the /wp-json/adminify/v1/get-addons-list REST API endpoint. The endpoint is registered with permission_callback set to __return_true, allowing unauthenticated attackers to retrieve the complete list of available addons, their installation status, version numbers, and download URLs.

Juniper Networks Junos OS uses the 128.0.0.0/2 subnet for internal communications between the RE and PFEs. It was discovered that packets utilizing these IP addresses may egress an QFX5000 Series switch, leaking configuration information such as heartbeats, kernel versions, etc. out to the Internet, leading to an information exposure vulnerability. This issue affects Juniper Networks Junos OS on QFX5110, QFX5120, QFX5200, QFX5210 Series, and QFX5100 with QFX 5e Series image installed: All versions prior to 17.3R3-S12; 18.1 versions prior to 18.1R3-S13; 18.3 versions prior to 18.3R3-S5; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2;

A security vulnerability has been detected in YiFang CMS up to 2.0.5. Affected by this vulnerability is the function exportInstallTable of the file app/utils/base/database/Migrate.php. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The The Events Calendar plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 6.15.2 via the REST endpoint. This makes it possible for unauthenticated attackers to extract information about password-protected vendors or venues.

The Trinity Audio – Text to Speech AI audio player to convert content into audio plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.21.0 via the ~/admin/inc/phpinfo.php file that gets created on install. This makes it possible for unauthenticated attackers to extract sensitive data including configuration data.

An issue was discovered in Mattermost Server before 3.0.0. It allows attackers to obtain sensitive information about team URLs via an API.

A flaw has been found in Das Parking Management System 停车场管理系统 6.2.0. Affected is an unknown function of the file /Operator/FindAll. This manipulation causes information disclosure. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A vulnerability was detected in Das Parking Management System 停车场管理系统 6.2.0. This impacts an unknown function of the file /Operator/Search. The manipulation results in information disclosure. The attack may be performed from remote. The exploit is now public and may be used.

A vulnerability was found in Provision-ISR SH-4050A-2, SH-4100A-2L(MM), SH-8100A-2L(MM), SH-16200A-2(1U), SH-16200A-5(1U) and NVR5-8200PX up to 20241220. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /server.js. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in D-Link DIR-852 up to 1.00CN B09. Affected by this vulnerability is the function phpcgi_main of the file /getcfg.php of the component Device Configuration Handler. Such manipulation leads to information disclosure. The attack may be performed from remote. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

The Code Quality Control Tool plugin for WordPress is vulnerable to Sensitive Information Exposure in version 0.1 through publicly exposed log files. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed log files.

The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 4.6.0. This makes it possible for unauthenticated attackers to extract donor names, emails, and donor id.

A vulnerability was found in Exrick xboot up to 3.3.4. It has been classified as problematic. This affects an unknown part of the component Spring Boot Admin/Spring Actuator. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in zlt2000 microservices-platform up to 6.0.0 and classified as problematic. This vulnerability affects unknown code of the file /actuator of the component Spring Actuator Interface. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

The Restrict – membership, site, content and user access restrictions for WordPress plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.2.8 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to higher-level roles such as administrator.

A vulnerability classified as critical was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. This vulnerability affects the function bs_GetHostInfo in the library libblinkapi.so of the file /cgi-bin/lighttpd.cgi. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Metasoft 美特软件 MetaCRM up to 6.4.2. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /env.jsp. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC3600 up to 1.0.22. This affects the function geteasycfg of the file /cgi-bin/lighttpd.cgi of the component Web Management Interface. The manipulation of the argument Password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The WP Directory Kit plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.4.9 via the wdk_public_action AJAX handler. This makes it possible for unauthenticated attackers to extract email addresses for users with Directory Kit-specific user roles.

The REHub - Price Comparison, Multi Vendor Marketplace Wordpress Theme theme for WordPress is vulnerable to Information Exposure in all versions up to, and including, 19.9.7 via the 'ajax_action_re_getfullcontent' function due to insufficient restrictions on which posts can be included. This makes it possible for unauthenticated attackers to extract data from password protected posts that they should not have access to.

A security flaw has been discovered in MineAdmin 1.x/2.x. This affects an unknown function of the component Swagger. The manipulation results in information disclosure. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A configuration weakness in the JBoss Application Server (AppSvr) component of Juniper Networks SRC Series allows a remote attacker to send a specially crafted query to cause the web server to disclose sensitive information in the HTTP response which allows the attacker to obtain sensitive information.

qt5-qtwebkit before 5.4 records private browsing URLs to its favicon database, WebpageIcons.db.

The Quform - WordPress Form Builder plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.20.0 via the 'saveUploadedFile' function. This makes it possible for unauthenticated attackers to extract sensitive data, such as Personally Identifiable Information, from files uploaded by users. Files uploaded via forms created before version 2.21.0 will remain vulnerable to exposure after upgrading. To fully patch the plugin, site administrators should download any previously uploaded files, delete previously existing files and forms, and create the forms again after upgrading to version 2.21.0.

An Information Exposure vulnerability in Juniper Networks SRC Series devices configured for NETCONF over SSH permits the negotiation of weak ciphers, which could allow a remote attacker to obtain sensitive information. A remote attacker with read and write access to network data could exploit this vulnerability to display plaintext bits from a block of ciphertext and obtain sensitive information. This issue affects all Juniper Networks SRC Series versions prior to 4.13.0-R6.

Mage AI allows remote unauthenticated attackers to leak the terminal server command history of arbitrary users

A vulnerability, which was classified as problematic, was found in D-Link DNS-320 2.02b01. This affects an unknown part of the file /cgi-bin/discovery.cgi of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

myWebland myBloggie 2.1.6 allow remote attackers to obtain sensitive information via (1) an invalid year parameter to calendar.php, reached through index.php; (2) a direct request to common.php; and (3) a mode array parameter in the query string to login.php, which reveal the installation path in various error messages.

The BitFire Security – Firewall, WAF, Bot/Spam Blocker, Login Security plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.5 via the bitfire_* directory that automatically gets created and stores potentially sensitive files without any access restrictions. This makes it possible for unauthenticated attackers to extract sensitive data from various files like config.ini, debug.log, and more when directory listing is enabled on the server and the ~/wp-content/plugins/index.php file is missing or ignored.

The shadow_copy2_get_shadow_copy_data function in modules/vfs_shadow_copy2.c in Samba 3.x and 4.x before 4.1.22, 4.2.x before 4.2.7, and 4.3.x before 4.3.3 does not verify that the DIRECTORY_LIST access right has been granted, which allows remote attackers to access snapshots by visiting a shadow copy directory.

The Newsletters plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 4.9.9. This is due the plugin not preventing direct access to the /vendor/mobiledetect/mobiledetectlib/export/exportToJSON.php. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

A vulnerability, which was classified as problematic, has been found in YouDianCMS 7. This issue affects some unknown processing of the file /t.php?action=phpinfo. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-273251. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TOTOLINK A3700R 9.1.2u.5822_B20200513 and classified as problematic. Affected by this issue is some unknown functionality of the file /cgi-bin/ExportSettings.sh of the component apmib Configuration Handler. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-272570 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM CICS TX 11.7 could allow an attacker to obtain sensitive information from HTTP response headers. IBM X-Force ID: 229467.

class/page.php in Farsi Script (aka FaScript) FaName 1.0 allows remote attackers to obtain sensitive information via a '; (quote semicolon) sequence in the id parameter, which reveals the installation path in an error message.

The PDF Builder for WPForms plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 1.2.116. This is due to the plugin allowing direct access to the composer-setup.php file which has display_errors on. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

The Linkify Text plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 1.9.1. This is due to the plugin utilizing bootstrap and leaving test files with display_errors on. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own and requires another vulnerability to be present for damage to an affected website.

The No Update Nag plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 1.4.12. This is due to the plugin allowing direct access to the bootstrap.php file which has display_errors on. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

A flaw was found in the OpenShift console. Several endpoints in the application use the authHandler() and authHandlerWithUser() middleware functions. When the default authentication provider ("openShiftAuth") is set, these functions do not perform any authentication checks, relying instead on the targeted service to handle authentication and authorization. This issue leads to various degrees of data exposure due to a lack of proper credential verification.

The Obfuscate Email plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 3.8.1. This is due to the plugin allowing direct access to the bootstrap.php file which has display_errors on. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.

The Community by PeepSo – Social Network, Membership, Registration, User Profiles plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 6.4.6.0. This is due to the plugin displaying errors and allowing direct access to the sse.php file. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website.