WebSVN before 2.6.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the search parameter.

OS command injection vulnerability in Array function in QSAN XEVO allows remote unauthenticated attackers to execute arbitrary commands via status parameter. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

CMCAgent in NCR Command Center Agent 16.3 on Aloha POS/BOH servers permits the submission of a runCommand parameter (within an XML document sent to port 8089) that enables the remote, unauthenticated execution of an arbitrary command as SYSTEM, as exploited in the wild in 2020 and/or 2021. NOTE: the vendor's position is that exploitation occurs only on devices with a certain "misconfiguration."

Quectel EG25-G devices through 202006130814 allow executing arbitrary code remotely by using an AT command to place shell metacharacters in quectel_handle_fumo_cfg input in atfwd_daemon.

EnGenius EWS356-FIT devices through 1.1.30 allow blind OS command injection. This allows an attacker to execute arbitrary OS commands via shell metacharacters to the Ping and Speed Test utilities.

The api/zrDm/set_ZRElink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the bssaddr, abiaddr, devtoken, devid, elinksync, or elink_proc_enable parameter.

A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not sanitize the input parameters in specific GET requests that allow for code execution on operating system level. In combination with other vulnerabilities (CVE-2024-47902, CVE-2024-47903, CVE-2024-47904) this could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

The api/ZRAndlink/set_ZRAndlink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iandlink_proc_enable parameter.

Tiki Wiki CMS – CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

The api/ZRIGMP/set_IGMP_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the IGMP_PROXY_WAN_CONNECT parameter.

EVOLUCARE ECSIMAGING (aka ECS Imaging) through 6.21.5 has an OS Command Injection vulnerability via shell metacharacters and an IFS manipulation. The parameter "file" on the webpage /showfile.php can be exploited to gain root access. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

HP no Mawashimono Nikki 6.6 and earlier allows remote attackers to execute arbitrary commands via unspecified vectors, related to a "command injection vulnerability."

The api/ZRIptv/setIptvInfo interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iptv_vlan parameter.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to command injection via SNMP OID iso.3.6.1.4.1.3212.100.3.2.14.1. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root.

An issue was discovered in Pascom Cloud Phone System before 7.20.x. In the management REST API, /services/apply in exd.pl allows remote attackers to execute arbitrary code via shell metacharacters.

Discord-Recon is a bot for the Discord chat service. Versions of Discord-Recon 0.0.3 and prior contain a vulnerability in which a remote attacker is able to overwrite any file on the system with the command results. This can result in remote code execution when the user overwrite important files on the system. As a workaround, bot maintainers can edit their `setting.py` file then add `<` and `>` into the `RCE` variable inside of it to fix the issue without an update. The vulnerability is patched in version 0.0.4.

The gnuplot package prior to version 0.1.0 for Node.js allows code execution via shell metacharacters in Gnuplot commands.

netis-systems MEX605 v2.00.06 allows attackers to execute arbitrary OS commands via a crafted payload to the tracert page.

In Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized command execution is possible. The app_minivm module has an "externnotify" program configuration option that is executed by the MinivmNotify dialplan application. The application uses the caller-id name and number as part of a built string passed to the OS shell for interpretation and execution. Since the caller-id name and number can come from an untrusted source, a crafted caller-id name or number allows an arbitrary shell command injection.

A command injection vulnerabilities have been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.1.1540 build 20210107. QNAP Systems Inc. QuTS hero versions prior to h4.5.1.1582 build 20210217.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

Yocto Project is an open source collaboration project that helps developers create custom Linux-based systems regardless of the hardware architecture. In Yocto Projects Bitbake before 2.6.2 (before and included Yocto Project 4.3.1), with the Toaster server (included in bitbake) running, missing input validation allows an attacker to perform a remote code execution in the server's shell via a crafted HTTP request. Authentication is not necessary. Toaster server execution has to be specifically run and is not the default for Bitbake command line builds, it is only used for the Toaster web based user interface to Bitbake. The fix has been backported to the bitbake included with Yocto Project 5.0, 3.1.31, 4.0.16, and 4.3.2.

An unspecified function in the web interface in Proofpoint Messaging Security Gateway 6.2.0.263:6.2.0.237 and earlier in Proofpoint Protection Server 5.5.3, 5.5.4, 5.5.5, 6.0.2, 6.1.1, and 6.2.0 allows remote attackers to execute arbitrary commands via unknown vectors, related to a "command injection" issue.

An issue in tiagorlampert CHAOS before 1b451cf62582295b7225caf5a7b506f0bad56f6b and 24c9e109b5be34df7b2bce8368eae669c481ed5e allows a remote attacker to execute arbitrary code via the unsafe concatenation of the `filename` argument into the `buildStr` string without any sanitization or filtering.

Remote Code Execution in cominput.jsp and comoutput.jsp in Northstar Technologies Inc NorthStar Club Management 6.3 allows remote unauthenticated users to inject and execute arbitrary system commands via the unsanitized user-controlled "command" and "commandvalues" parameters.

Zoho ManageEngine ADSelfService Plus through 6101 is vulnerable to unauthenticated Remote Code Execution while changing the password.

A vulnerability, which was classified as critical, has been found in MailCleaner up to 2023.03.14. This issue affects some unknown processing of the component Email Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-262307.

A flaw was found in WebSVN 2.3.2. Without prior authentication, if the 'allowDownload' option is enabled in config.php, an attacker can invoke the dl.php script and pass a well formed 'path' argument to execute arbitrary commands against the underlying operating system.

Genexis PLATINUM 4410 2.1 P4410-V2-1.28 devices allow remote attackers to execute arbitrary code via shell metacharacters to sys_config_valid.xgi, as demonstrated by the sys_config_valid.xgi?exeshell=%60telnetd%20%26%60 URI.

The @ronomon/opened library before 1.5.2 is vulnerable to a command injection vulnerability which would allow a remote attacker to execute commands on the system if the library was used with untrusted input.

The DHCP client on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allows unauthenticated remote code execution as root because /etc/services/INET/inet_ipv4.php mishandles shell metacharacters, affecting generated files such as WAN-1-udhcpc.sh.

Remote Code Execution (RCE) vulnerability exists in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicious users can use this vulnerability to use "\ " or backticks to bypass the shell metacharacters in the ssid0 or ssid1 parameters to execute arbitrary commands.This vulnerability is due to the fact that CVE-2019-17509 is not fully patched and can be bypassed by using line breaks or backticks on its basis.

An issue in Infotel Conseil GLPI v.10.X.X and after allows a remote attacker to execute arbitrary code via the insufficient validation of user-supplied input.

There is a command injection vulnerability in the underlying Central Communications service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

vsftpd 2.3.4 downloaded between 20110630 and 20110703 contains a backdoor which opens a shell on port 6200/tcp.

rakibtg Docker Dashboard before 2021-02-28 allows command injection in backend/utilities/terminal.js via shell metacharacters in the command parameter of an API request. NOTE: this is NOT a Docker, Inc. product.

Netis WF2780 2.3.40404 and WF2411 1.1.29629 devices allow Shell Metacharacter Injection into the ping command, leading to remote code execution.

There is a command injection vulnerability in the underlying deauthentication service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

In the MMM::Agent::Helpers::_execute function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1, a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

In the MMM::Agent::Helpers::Network::clear_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for FreeBSD), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for FreeBSD), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

Several high privileged APIs on the Vizio P65-F1 6.0.31.4-2 and E50x-E1 10.0.31.4-2 Smart TVs do not enforce access controls, allowing an unauthenticated threat actor to access privileged functionality, leading to OS command execution. The specific attack methodology is a file upload.

The improper neutralization of special elements in the WSGI server of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

Static code injection vulnerability in install_.php in e107 CMS 0.7.24 and probably earlier versions, when the installation script is not removed, allows remote attackers to inject arbitrary PHP code into e107_config.php via a crafted MySQL server name.

A vulnerability exists in the SaveConfigFile function of the RACompare Service, which may allow for OS command injection. This vulnerability may allow a remote, unauthenticated attacker to execute arbitrary commands in Rockwell Automation FactoryTalk AssetCentre v10.00 and earlier.

** UNSUPPORTED WHEN ASSIGNED ** The command injection vulnerability in the CGI program "remote_help-cgi" in Zyxel NAS326 firmware versions before V5.21(AAZF.17)C0 and NAS542 firmware versions before V5.21(ABAG.14)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted HTTP POST request.

NextcloudPi is a ready to use image for Virtual Machines, Raspberry Pi, Odroid HC1, Rock64 and other boards. A command injection vulnerability in NextCloudPi allows command execution as the root user via the NextCloudPi web-panel. Due to a security misconfiguration this can be used by anyone with access to NextCloudPi web-panel, no authentication is required. It is recommended that the NextCloudPi is upgraded to 1.53.1.

A remote code execution vulnerability exists in mintplex-labs/anything-llm due to improper handling of environment variables. Attackers can exploit this vulnerability by injecting arbitrary environment variables via the `POST /api/system/update-env` endpoint, which allows for the execution of arbitrary code on the host running anything-llm. The vulnerability is present in the latest version of anything-llm, with the latest commit identified as fde905aac1812b84066ff72e5f2f90b56d4c3a59. This issue has been fixed in version 1.0.0. Successful exploitation could lead to code execution on the host, enabling attackers to read and modify data accessible to the user running the service, potentially leading to a denial of service.

Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input.

Command Injection in Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted "action/umountUSBPartition" request. This occurs because the "formSetUSBPartitionUmount" function executes the "doSystemCmd" function with untrusted input.