Stack overflow in PJSUA API when calling pjsua_playlist_create. An attacker-controlled 'file_names' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formDMZ.

AASync.com AASync version 2.2.1.0 suffers from an instance of CWE-121: Stack-based Buffer Overflow.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.city.vlan parameter in the function formGetIptv.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stballvlans parameter in the function setIptvInfo.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.stb.port parameter in the function setIptvInfo.

An issue was discovered in Mbed TLS 3.6 before 3.6.1. A stack buffer overflow in mbedtls_ecdsa_der_to_raw() and mbedtls_ecdsa_raw_to_der() can occur when the bits parameter is larger than the largest supported curve. In some configurations with PSA disabled, all values of bits are affected. (This never happens in internal library calls, but can affect applications that call these functions directly.)

Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.stb.mode parameter in the function formGetIptv.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function setIptvInfo.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the serverName parameter in the function form_fast_setting_internet_set.

A Stack-based Buffer Overflow issue was discovered in Advantech WebAccess versions prior to 8.3. There are multiple instances of a vulnerability that allows too much data to be written to a location on the stack.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.stb.port parameter in the function formGetIptv.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function formGetIptv.

WebAccess Node Version 8.4.4 and prior is vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute arbitrary code.

TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formDosCfg.

Stack-based buffer overflow vulnerability exists in ELECOM wireless access points. By processing a specially crafted HTTP request, arbitrary code may be executed.

A stack-based buffer overflow vulnerability in Advantech WebAccess Versions 9.02 and prior caused by a lack of proper validation of the length of user-supplied data may allow remote code execution.

The <redacted>.so library, which is used by <redacted>, is vulnerable to a buffer overflow in the code that handles the deletion of certificates. This buffer overflow can be triggered by providing a long file path to the <redacted> action of the <redacted>.exe CGI binary or to the <redacted>.sh CGI script. This binary or script will write this file path to <redacted>, which is then read by <redacted>.so This issue affects Iocharger firmware for AC models before version 24120701. Likelihood: Moderate – An attacker will have to find this exploit by either obtaining the binaries involved in this vulnerability, or by trial and error. Furthermore, the attacker will need a (low privilege) account to gain access to the <redacted>.exe CGI binary or <redacted>.sh script to trigger the vulnerability, or convince a user with such access send an HTTP request that triggers it. Impact: High – The <redacted> process, which we assume is responsible for OCPP communication, will keep crashing after performing the exploit. This happens because the buffer overflow causes the process to segfault before <redacted> is removed. This means that, even though <redacted> is automatically restarted, it will crash again as soon as it tries to parse the text file. CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack leads to reducred availability of the device (VC:N/VI:N/VA:H). THere is not impact on subsequent systems. (SC:N/SI:N/SA:N). Alltough this device is an EV charger handing significant amounts of power, we do not forsee a safety impact. The attack can be automated (AU:Y). Because the DoS condition is written to disk persistantly, it cannot be recovered by the user (R:I).

There are many buffer overflow vulnerabilities present in several CGI binaries of the charging station.This issue affects Iocharger firmware for AC model chargers beforeversion 24120701. Likelihood: High – Given the prevalence of these buffer overflows, and the clear error message of the web server, an attacker is very likely to be able to find these vulnerabilities. Impact: Low – Usually, overflowing one of these buffers just causes a segmentation fault of the CGI binary, which causes the web server to return a 502 Bad Gateway error. However the webserver itself is not affected, and no DoS can be achieved. Abusing these buffer overflows in a meaningful way requires highly technical knowledge, especially since ASLR also seems to be enabled on the charging station. However, a skilled attacker might be able to use one of these buffer overflows to obtain remote code execution. CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack has a small impact on the availability of the device (VC:N/VI:N/VA:L). There is no impact on subsequent systems. (SC:N/SI:N/SA:N). While this device is an EV charger handing significant amounts of power, we do not expect  this vulnerability to have a safety impact. The attack can be automated (AU:Y).

Advantech WebAccess versions 9.02 and prior are vulnerable to a stack-based buffer overflow, which may allow an attacker to remotely execute code.

FATEK Automation Communication Server Versions 1.13 and prior lacks proper validation of user-supplied data, which could result in a stack-based buffer overflow condition and allow an attacker to remotely execute code.

TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formIpQoS.

TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formTcpipSetup.

A Stack-based Buffer Overflow issue was discovered in WECON LEVI Studio HMI Editor v1.8.1 and prior. Multiple stack-based buffer overflow vulnerabilities have been identified in which the application does not verify string size before copying to memory; the attacker may then be able to crash the application or run arbitrary code.

Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the entrys parameter at ip/goform/RouteStatic.

There is a buffer overflow vulnerability in the underlying Local User Authentication Database service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A vulnerability in /goform/SetNetControlList in the sub_656BC function in Tenda AX1806 1.0.0.1 firmware leads to stack-based buffer overflow.

Shenzhen Libituo Technology Co., Ltd LBT-T300-T400 v3.2 was discovered to contain a stack overflow via the apn_name_3g parameter in the config_3g_para function.

Stack-based Buffer Overflow vulnerability in cachekey plugin of Apache Traffic Server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

A vulnerability classified as critical was found in Tenda AC500 2.0.1.9(1307). Affected by this vulnerability is the function formexeCommand of the file /goform/execCommand. The manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-261145 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via the password parameter in function loginAuth .

An exploitable Stack Based Buffer Overflow vulnerability exists in the EnumMetaInfo function of Aspose Aspose.Words library, version 18.11.0.0. A specially crafted doc file can cause a stack-based buffer overflow, resulting in remote code execution. An attacker needs to provide a malformed file to the victim to trigger this vulnerability.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiBasicCfg

libglxproto.c in OpenGL libglvnd bb06db5a was discovered to contain a segmentation violation via the function glXGetDrawableScreen(). NOTE: this is disputed because there are no common situations in which users require uninterrupted operation with an attacker-controller server.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer C90 1.0.6 Build 20200114 rel.73164(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14655.

A stack-based buffer overflow vulnerability exists in NI System Configuration that could result in information disclosure and/or arbitrary code execution. Successful exploitation requires that an attacker can provide a specially crafted response. This affects NI System Configuration 2023 Q3 and all previous versions.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiEasyCfg.

Five buffer overflows in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to initiate a denial-of-service attack and execute arbitrary code.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a stack overflow via the lang parameter in the function setLanguageCfg.

An issue was discovered on Supermicro BMC firmware in select X11, X12, H12, B12, X13, H13, and B13 motherboards (and CMM6 modules). An unauthenticated user can post crafted data to the interface that triggers a stack buffer overflow, and may lead to arbitrary remote code execution on a BMC.

A stack-based buffer overflow vulnerability exists in the touchlist_sync.cgi touchlistsync() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can send an HTTP request to trigger this vulnerability.

A stack-based buffer overflow in Fortinet FortiAnalyzer versions 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.12, 6.4.0 through 6.4.14, FortiManager versions 7.4.0 through 7.4.3, 7.2.0 through 7.2.5, 7.0.0 through 7.0.12, 6.4.0 through 6.4.14, FortiManager Cloud versions 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.11, 6.4.1 through 6.4.7, FortiAnalyzer Cloud versions 7.4.1 through 7.4.3, 7.2.1 through 7.2.5, 7.0.1 through 7.0.11, 6.4.1 through 6.4.7 allows attacker to execute unauthorized code or commands via specially crafted packets.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to a stack buffer overflow via crafted HTTP POST request sent by a remote, unauthenticated attacker to /GponForm/fsetup_Form. An attacker can leverage this vulnerability to potentially execute arbitrary code.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the http_host parameter in the function loginAuth.

Tenda FH1206 V1.2.0.8(8155)_EN was discovered to contain a stack-based buffer overflow vulnerability via the page parameter at ip/goform/NatStaticSetting.

TOTOLINK CP450 v4.1.0cu.747_B20191224 was discovered to contain a stack buffer overflow vulnerability in the SetPortForwardRules function.

A stack-based buffer overflow vulnerability exists in the OpenPLC Runtime EtherNet/IP parser functionality of OpenPLC _v3 b4702061dc14d1024856f71b4543298d77007b88. A specially crafted EtherNet/IP request can lead to remote code execution. An attacker can send a series of EtherNet/IP requests to trigger this vulnerability.

TOTOLINK AC1200 Wireless Router A3002R Firmware V1.1.1-B20200824 is vulnerable to Buffer Overflow. In the boa server program's CGI handling function formWlEncrypt, there is a lack of length restriction on the wlan_ssid field. This oversight leads to potential buffer overflow under specific circumstances. For instance, by invoking the formWlanRedirect function with specific parameters to alter wlan_idx's value and subsequently invoking the formWlEncrypt function, an attacker can trigger buffer overflow, enabling arbitrary command execution or denial of service attacks.