This affects all versions of package ffmpegdotjs. If attacker-controlled user input is given to the trimvideo function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

This affects all versions of package psnode. If attacker-controlled user input is given to the kill function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

A command injection in git-dummy-commit v1.3.0 allows os level commands to be executed due to an unescaped parameter.

This affects all versions of package wincred. If attacker-controlled user input is given to the getCredential function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

All versions of package gitlogplus are vulnerable to Command Injection via the main functionality, as options attributes are appended to the command to be executed without sanitization.

This affects all versions of package ps-visitor. If attacker-controlled user input is given to the kill function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

This affects all versions of package picotts. If attacker-controlled user input is given to the say function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been rated as critical. Affected by this issue is the function setUpgradeUboot of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

All versions of package git are vulnerable to Remote Code Execution (RCE) due to missing sanitization in the Git.git method, which allows execution of OS commands rather than just git commands. Steps to Reproduce 1. Create a file named exploit.js with the following content: js var Git = require("git").Git; var repo = new Git("repo-test"); var user_input = "version; date"; repo.git(user_input, function(err, result) { console.log(result); }) 2. In the same directory as exploit.js, run npm install git. 3. Run exploit.js: node exploit.js. You should see the outputs of both the git version and date command-lines. Note that the repo-test Git repository does not need to be present to make this PoC work.

A vulnerability classified as critical has been found in TOTOLINK CA300-PoE 6.2c.884. This affects the function QuickSetting of the file ap.so. The manipulation of the argument hour/minute leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

This affects all versions of package killing. If attacker-controlled user input is given, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

This affects all versions of package portkiller. If (attacker-controlled) user input is given, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.

This affects all versions of package ps-kill. If (attacker-controlled) user input is given to the kill function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization in the index.js file. PoC (provided by reporter): var ps_kill = require('ps-kill'); ps_kill.kill('$(touch success)',function(){});

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the password can be specified, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

Command injection exists in pdf-image v2.0.0 due to an unescaped string parameter.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been declared as critical. Affected by this vulnerability is the function setUpgradeFW of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Remote Code execution vulnerability in Micro Focus Operation Bridge Reporter (OBR) product, affecting version 10.40. The vulnerability could be exploited to allow Remote Code Execution on the OBR server.

A CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that could cause remote code execution when performed over the network. Affected Product: StruxureWare Data Center Expert (V7.8.1 and prior)

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the API password can be specified, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been classified as critical. Affected is the function SetWLanApcliSettings of the file wps.so. The manipulation of the argument PIN leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D6400 before 1.0.0.78, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6250 before 1.0.4.8, R6300v2 before 1.0.4.6, R6400 before 1.0.1.12, R6700 before 1.0.1.16, R7000 before 1.0.7.10, R7100LG before 1.0.0.42, R7300DST before 1.0.0.44, R7900 before 1.0.1.12, R8000 before 1.0.3.36, R8300 before 1.0.2.74, R8500 before 1.0.2.74, WNDR3400v3 before 1.0.1.14, and WNR3500Lv2 before 1.2.0.48.

An arbitrary file writing vulnerability in the Secure PDF eXchange (SPX) feature of Sophos Firewall versions older than 21.0 MR2 (21.0.2) can lead to pre-auth remote code execution, if a specific configuration of SPX is enabled in combination with the firewall running in High Availability (HA) mode.

CodeIgniter is a PHP full-stack web framework. A command injection vulnerability present in versions prior to 4.6.2 affects applications that use the ImageMagick handler for image processing (`imagick` as the image library) and either allow file uploads with user-controlled filenames and process uploaded images using the `resize()` method or use the `text()` method with user-controlled text content or options. An attacker can upload a file with a malicious filename containing shell metacharacters that get executed when the image is processed or provide malicious text content or options that get executed when adding text to images Users should upgrade to v4.6.2 or later to receive a patch. As a workaround, switch to the GD image handler (`gd`, the default handler), which is not affected by either vulnerability. For file upload scenarios, instead of using user-provided filenames, generate random names to eliminate the attack vector with `getRandomName()` when using the `move()` method, or use the `store()` method, which automatically generates safe filenames. For text operations, if one must use ImageMagick with user-controlled text, sanitize the input to only allow safe characters and validate/restrict text options.

A vulnerability has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this vulnerability is the function RP_UpgradeFWByBBS of the file /goform/RP_UpgradeFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An OS Command Injection vulnerability exists in the ping.php script functionality of Advantech R-SeeNet v 2.4.12 (20.10.2020). A specially crafted HTTP request can lead to arbitrary OS command execution. An attacker can send a crafted HTTP request to trigger this vulnerability.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations.

An issue was discovered in ASUSWRT 3.0.0.4.384.20308. When processing the /start_apply.htm POST data, there is a command injection issue via shell metacharacters in the fb_email parameter. By using this issue, an attacker can control the router and get shell.

A vulnerability, which was classified as critical, was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function wirelessAdvancedHidden of the file /goform/wirelessAdvancedHidden. The manipulation of the argument ExtChSelector/24GSelector/5GSelector leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

If exploited, this command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Music Station versions prior to 5.1.13; versions prior to 5.2.9; versions prior to 5.3.11.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations. This vulnerability is essentially the same as CVE-2025-54948 but targets a different CPU architecture.

APKLeaks is an open-source project for scanning APK file for URIs, endpoints & secrets. APKLeaks prior to v2.0.3 allows remote attackers to execute arbitrary OS commands via package name inside application manifest. An attacker could include arguments that allow unintended commands or code to be executed, allow sensitive data to be read or modified or could cause other unintended behavior through malicious package name. The problem is fixed in version v2.0.6-dev and above.

systeminformation is an open source system and OS information library for node.js. A command injection vulnerability has been discovered in versions of systeminformation prior to 5.6.4. The issue has been fixed with a parameter check on user input. Please upgrade to version >= 5.6.4. If you cannot upgrade, be sure to check or sanitize service parameters that are passed to si.inetLatency(), si.inetChecksite(), si.services(), si.processLoad() and other commands. Only allow strings, reject any arrays. String sanitation works as expected.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been rated as critical. Affected by this issue is the function setSystemWizard/setSystemControl of the file /setSystemWizard. The manipulation of the argument AdminID leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

SolarView Compact SV-CPT-MC310 prior to Ver.6.5 allows an attacker to execute arbitrary OS commands with the web server privilege via unspecified vectors.

D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Movable Type 7 r.5002 and earlier (Movable Type 7 Series), Movable Type 6.8.2 and earlier (Movable Type 6 Series), Movable Type Advanced 7 r.5002 and earlier (Movable Type Advanced 7 Series), Movable Type Advanced 6.8.2 and earlier (Movable Type Advanced 6 Series), Movable Type Premium 1.46 and earlier, and Movable Type Premium Advanced 1.46 and earlier allow remote attackers to execute arbitrary OS commands via unspecified vectors. Note that all versions of Movable Type 4.0 or later including unsupported (End-of-Life, EOL) versions are also affected by this vulnerability.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter. The manipulation of the argument apselect_%d/newap_text_%d leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this issue is the function RP_checkFWByBBS of the file /goform/RP_checkFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Cursor is a code editor built for programming with AI. Cursor allows writing in-workspace files with no user approval in versions below 1.3.9, If the file is a dotfile, editing it requires approval but creating a new one doesn't. Hence, if sensitive MCP files, such as the .cursor/mcp.json file don't already exist in the workspace, an attacker can chain a indirect prompt injection vulnerability to hijack the context to write to the settings file and trigger RCE on the victim without user approval. This is fixed in version 1.3.9.

heroku-addonpool through 0.1.15 is vulnerable to Command Injection.

KLog Server 2.4.1 allows OS command injection via shell metacharacters in the actions/authenticate.php user parameter.

MVPower CCTV DVR models, including TV-7104HE 1.8.4 115215B9 and TV7108HE, contain a web shell that is accessible via a /shell URI. A remote unauthenticated attacker can execute arbitrary operating system commands as root. This vulnerability has also been referred to as the "JAWS webserver RCE" because of the easily identifying HTTP response server field. Other firmware versions, at least from 2014 through 2019, can be affected. This was exploited in the wild in 2017 through 2022.

OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

Hardcoded manufacturer credentials and an OS command injection vulnerability in the /cgi-bin/mft/ directory on ABUS TVIP TVIP20050 LM.1.6.18, TVIP10051 LM.1.6.18, TVIP11050 MG.1.6.03.05, TVIP20550 LM.1.6.18, TVIP10050 LM.1.6.18, TVIP11550 MG.1.6.03, TVIP21050 MG.1.6.03, and TVIP51550 MG.1.6.03 cameras allow remote attackers to execute code as root.

Xerox WorkCentre 3655, 3655i, 58XX, 58XXi, 59XX, 59XXi, 6655, 6655i, 72XX, 72XXi, 78XX, 78XXi, 7970, and 7970i devices before 073.xxx.086.15410 do not properly escape parameters in the support/remoteUI/configrui.php script, which can allow an unauthenticated attacker to execute OS commands on the device.