MZ Automation's libIEC61850 (versions 1.4 and prior; version 1.5 prior to commit a3b04b7bc4872a5a39e5de3fdc5fbde52c09e10e) does not sanitize input before memcpy is used, which could allow an attacker to crash the device or remotely execute arbitrary code.

Multiple Buffer overflows in the MMS Client in MZ Automation LibIEC61850 before commit 1f52be9ddeae00e69cd43e4cac3cb4f0c880c4f0 allow a malicious server to cause a stack-based buffer overflow via the MMS IdentifyResponse message.

Multiple Buffer overflows in the MMS Client in MZ Automation LibIEC61850 before commit ac925fae8e281ac6defcd630e9dd756264e9c5bc allow a malicious server to cause a stack-based buffer overflow via the MMS FileDirResponse message.

In libIEC61850 before version 1.4.3, when a message with COTP message length field with value < 4 is received an integer underflow will happen leading to heap buffer overflow. This can cause an application crash or on some platforms even the execution of remote code. If your application is used in open networks or there are untrusted nodes in the network it is highly recommend to apply the patch. This was patched with commit 033ab5b. Users of version 1.4.x should upgrade to version 1.4.3 when available. As a workaround changes of commit 033ab5b can be applied to older versions.

An issue has been found in libIEC61850 v1.3. It is a heap-based buffer overflow in BerEncoder_encodeOctetString in mms/asn1/ber_encoder.c.

An issue has been found in libIEC61850 v1.3. It is a stack-based buffer overflow in prepareGooseBuffer in goose/goose_publisher.c.

In libIEC61850 1.4.0, MmsValue_decodeMmsData in mms/iso_mms/server/mms_access_result.c has a heap-based buffer overflow.

MmsValue_decodeMmsData in mms/iso_mms/server/mms_access_result.c in libIEC61850 through 1.4.0 has a heap-based buffer overflow when parsing the MMS_BIT_STRING data type.

An issue has been found in libIEC61850 v1.3. It is a heap-based buffer overflow in BerEncoder_encodeOctetString in mms/asn1/ber_encoder.c. This is exploitable even after CVE-2018-18834 has been patched, with a different dataSetValue sequence than the CVE-2018-18834 attack vector.

libiec61850 v1.5 was discovered to contain a heap overflow via the BerEncoder_encodeLength function at /asn1/ber_encoder.c.

Buffer overflow in system firmware for EDK II may allow unauthenticated user to potentially enable escalation of privilege and/or denial of service via network access.

A heap-based buffer overflow vulnerability exists in the .egi parsing functionality of The Biosig Project libbiosig 2.5.0 and Master Branch (ab0ee111). A specially crafted .egi file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.

In ixheaacd_adts_crc_start_reg of ixheaacd_adts_crc_check.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-113261928.

D-Link DIR-882 DIR882A1_FW130B06 was discovered to contain a stack overflow via the sub_477AA0 function.

A heap-based buffer overflow vulnerability exists in the LookupTable::SetLUT functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted malformed file can lead to memory corruption. An attacker can provide a malicious file to trigger this vulnerability.

A out-of-bounds write in Fortinet FortiOS versions 7.4.0 through 7.4.2, 7.2.0 through 7.2.6, 7.0.0 through 7.0.13, 6.4.0 through 6.4.14, 6.2.0 through 6.2.15, 6.0.0 through 6.0.17, FortiProxy versions 7.4.0 through 7.4.2, 7.2.0 through 7.2.8, 7.0.0 through 7.0.14, 2.0.0 through 2.0.13, 1.2.0 through 1.2.13, 1.1.0 through 1.1.6, 1.0.0 through 1.0.7 allows attacker to execute unauthorized code or commands via specifically crafted requests

D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a stack overflow via the gena.cgi binary.

In D-LINK Go-RT-AC750 v101b03, the sprintf function in the sub_40E700 function within the cgibin is susceptible to stack overflow.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client. An attacker who successfully exploited the vulnerability could run arbitrary code on the client machine. To exploit the vulnerability, an attacker could send specially crafted DHCP responses to a client. The security update addresses the vulnerability by correcting how Windows DHCP clients handle certain DHCP responses.

Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the time parameter in the get_parentControl_list_Info function.

A heap-based buffer overflow vulnerability exists in the GGUF library GGUF_TYPE_ARRAY/GGUF_TYPE_STRING parsing functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

In impeg2d_mc_fullx_fully of impeg2d_mc.c there is a possible out of bound write due to missing bounds check. This could lead to remote arbitrary code execution with no additional execution privileges needed. User interaction is needed for exploitation.

handle_request in http.c in cherry through 4b877df has an sscanf stack-based buffer overflow via a long URI, leading to remote code execution.

A heap-based buffer overflow vulnerability exists in the GGUF library info-&gt;ne functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka "Microsoft Exchange Memory Corruption Vulnerability." This affects Microsoft Exchange Server.

In the deserialization constructor of NanoAppFilter.java, there is a possible loss of data due to type confusion. This could lead to local escalation of privilege in the system server with no additional execution privileges needed. User interaction is not needed for exploitation.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

TOTOLINK A3700R_V9.1.2u.6165_20211012 has a stack overflow vulnerability via setParentalRules

A heap overflow vulnerability in IPSec component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated malicious user to send specially crafted requests in-order-to crash the service thereby causing a DoS attack. In certain conditions this may lead to execution of arbitrary code

A stack-based overflow vulnerability [CWE-124] in Fortinet FortiOS version 7.0.0 through 7.0.10 and 7.2.0 through 7.2.3 and FortiProxy version 7.0.0 through 7.0.9 and 7.2.0 through 7.2.2 allows a remote unauthenticated attacker to execute arbitrary code or command via crafted packets reaching proxy policies or firewall policies with proxy mode alongside deep or full packet inspection.

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress_segment() that results in a memory corruption and probably even a remote code execution.

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function process_plane() that results in a memory corruption and probably even a remote code execution.

In prop2cfg of btif_storage.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

In Modem IMS Stack, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01161803; Issue ID: MOLY01161803 (MSV-893).

route in main.c in Pico HTTP Server in C through f3b69a6 has an sprintf stack-based buffer overflow via a long URI, leading to remote code execution.

TOTOLINK_A3700R_V9.1.2u.6165_20211012has a stack overflow vulnerability via setLanguageCfg

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function ui_clip_handle_data() that results in a memory corruption and probably even a remote code execution.

Buffer overflow in identifier field of WSD probe request process of Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*:Satera MF740C Series/Satera MF640C Series/Satera LBP660C Series/Satera LBP620C Series firmware v12.07 and earlier, and Satera MF750C Series/Satera LBP670C Series firmware v03.09 and earlier sold in Japan.Color imageCLASS MF740C Series/Color imageCLASS MF640C Series/Color imageCLASS X MF1127C/Color imageCLASS LBP664Cdw/Color imageCLASS LBP622Cdw/Color imageCLASS X LBP1127C firmware v12.07 and earlier, and Color imageCLASS MF750C Series/Color imageCLASS X MF1333C/Color imageCLASS LBP674Cdw/Color imageCLASS X LBP1333C firmware v03.09 and earlier sold in US.i-SENSYS MF740C Series/i-SENSYS MF640C Series/C1127i Series/i-SENSYS LBP660C Series/i-SENSYS LBP620C Series/C1127P firmware v12.07 and earlier, and i-SENSYS MF750C Series/C1333i Series/i-SENSYS LBP673Cdw/C1333P firmware v03.09 and earlier sold in Europe.

A heap-based buffer overflow vulnerability exists in the GGUF library header.n_tensors functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.

Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine. The `concat` built-in can write over the bounds of the memory buffer that was allocated for it and thus overwrite existing valid data. The root cause is that the `build_IR` for `concat` doesn't properly adhere to the API of copy functions (for `>=0.3.2` the `copy_bytes` function). A contract search was performed and no vulnerable contracts were found in production. The buffer overflow can result in the change of semantics of the contract. The overflow is length-dependent and thus it might go unnoticed during contract testing. However, certainly not all usages of concat will result in overwritten valid data as we require it to be in an internal function and close to the return statement where other memory allocations don't occur. This issue has been addressed in 0.4.0.

Eaton 9000X DriveA versions 2.0.29 and prior has a stack-based buffer overflow vulnerability, which may allow remote code execution.

Stack-based buffer overflow in Asuswrt-Merlin firmware for ASUS devices older than 384.4 and ASUS firmware before 3.0.0.4.382.50470 for devices allows remote attackers to execute arbitrary code by providing a long string to the blocking.asp page via a GET or POST request. Vulnerable parameters are flag, mac, and cat_id.

During the retrofit validation process, the firmware doesn't properly check the boundaries while copying some attributes to check. This allows a stack-based buffer overflow that could lead to a potential Remote Code Execution on the targeted device

An out-of-bounds write vulnerability exists in the JPEG2000Codec::DecodeByStreamsCommon functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted DICOM file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.

A certain sequence of valid BGP or IPv6 BFD packets may trigger a stack based buffer overflow in the Junos OS Packet Forwarding Engine manager (FXPC) process on QFX5000 series, EX4300, EX4600 devices. This issue can result in a crash of the fxpc daemon or may potentially lead to remote code execution. Affected releases are Juniper Networks Junos OS on QFX 5000 series, EX4300, EX4600 are: 14.1X53; 15.1X53 versions prior to 15.1X53-D235; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3-S2, 17.3R4; 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1, 18.1R4; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2.

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function cssp_read_tsrequest() that results in a memory corruption and probably even a remote code execution.

In Advantech WebAccess versions V8.2_20170817 and prior, WebAccess versions V8.3.0 and prior, WebAccess Dashboard versions V.2.0.15 and prior, WebAccess Scada Node versions prior to 8.3.1, and WebAccess/NMS 2.0.3 and prior, a heap-based buffer overflow vulnerability has been identified, which may allow an attacker to execute arbitrary code.

The Parameter Zone Read and Parameter Zone Write command handlers allow performing a Stack buffer overflow. This could potentially lead to a Remote Code execution on the targeted device.

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress() that results in a memory corruption and probably even a remote code execution.