Buffer Overflow vulnerability in the function setSchedWifi in Tenda AC9 v.3.0, firmware version v.15.03.06.42_multi allows a remote attacker to cause a denial of service or run arbitrary code via crafted overflow data.
H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the DelDNSHnList interface at /goform/aspForm.
Stack-based Buffer Overflow vulnerability in cachekey plugin of Apache Traffic Server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.
A memory corruption vulnerability was addressed with improved locking. This issue is fixed in macOS Monterey 12.7.4, macOS Ventura 13.6.5, macOS Sonoma 14.4, visionOS 1.1, iOS 17.4 and iPadOS 17.4, watchOS 10.4, iOS 16.7.6 and iPadOS 16.7.6, tvOS 17.4. An app may be able to cause unexpected system termination or write kernel memory.
A global buffer overflow was discovered in the iteration_loop function in loop.c in BladeEnc version 0.94.2. The vulnerability causes an out-of-bounds write, which leads to remote denial of service or possibly code execution.
Memory corruption due to information exposure in Powerline Communication Firmware while sending different MMEs from a single, unassociated device.
Advantech R-SeeNet Versions 2.4.17 and prior are vulnerable to a stack-based buffer overflow. An unauthorized attacker can use an outsized filename to overflow the stack buffer and enable remote code execution.
Realtek Jungle SDK version v2.x up to v3.4.14B provides a 'WiFi Simple Config' server that implements both UPnP and SSDP protocols. The binary is usually named wscd or mini_upnpd and is the successor to miniigd. The server is vulnerable to a stack buffer overflow vulnerability that is present due to unsafe parsing of the UPnP SUBSCRIBE/UNSUBSCRIBE Callback header. Successful exploitation of this vulnerability allows remote unauthenticated attackers to gain arbitrary code execution on the affected device.
A stack-based buffer overflow in Fortinet FortiWeb version 6.4.0, version 6.3.15 and below, 6.2.5 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests
FW-WGS-804HPT v1.305b241111 was discovered to contain a stack overflow via the web_sys_infoContact_post function.
An out-of-bounds write vulnerability exists in the sopen_FAMOS_read functionality of The Biosig Project libbiosig 2.5.0 and Master Branch (ab0ee111). A specially crafted .famos file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.
The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.
A stack buffer overflow vulnerability has been reported to affect QNAP device running QUSBCam2. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QUSBCam2: QTS 4.5.4: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 5.0: QUSBCam2 2.0.1 ( 2021/08/03 ) and later QTS 4.3.6: QUSBCam2 1.1.4 ( 2021/07/30 ) and later QTS 4.3.3: QUSBCam2 1.1.4 ( 2021/08/06 ) and later QuTS hero 4.5.3: QUSBCam2 1.1.4 ( 2021/07/30 ) and later
A stack buffer overflow vulnerability has been reported to affect QNAP device running NVR Storage Expansion. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of NVR Storage Expansion: NVR Storage Expansion 1.0.6 ( 2021/08/03 ) and later
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition.
A vulnerability was found in Tenda W12 3.0.0.5. It has been rated as critical. Affected by this issue is the function cgiWifiRadioSet of the file /bin/httpd. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
An exploitable memory corruption vulnerability exists in AMD ATIDXX64.DLL driver, versions 25.20.15031.5004 and 25.20.15031.9002. A specially crafted pixel shader can cause an out-of-bounds memory write. An attacker can provide a specially crafted shader file to trigger this vulnerability. This vulnerability can be triggered from VMware guest, affecting VMware host.
libspf2 before 1.2.11 has a heap-based buffer overflow that might allow remote attackers to execute arbitrary code (via an unauthenticated e-mail message from anywhere on the Internet) with a crafted SPF DNS record, because of SPF_record_expand_data in spf_expand.c. The amount of overflowed data depends on the relationship between the length of an entire domain name and the length of its leftmost label. The vulnerable code may be part of the supply chain of a site's e-mail infrastructure (e.g., with additional configuration, Exim can use libspf2; the Postfix web site links to unofficial patches for use of libspf2 with Postfix; older versions of spfquery relied on libspf2) but most often is not.
The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.
The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.
This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer C90 1.0.6 Build 20200114 rel.73164(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14655.
Improper Restriction of Operations within the Bounds of a Memory Buffer and Stack-based Buffer Overflow vulnerabilities were discovered in Apache NuttX RTOS Bluetooth Stack (HCI and UART components) that may result in system crash, denial of service, or arbitrary code execution, after receiving maliciously crafted packets. NuttX's Bluetooth HCI/UART stack users are advised to upgrade to version 12.9.0, which fixes the identified implementation issues. This issue affects Apache NuttX: from 7.25 before 12.9.0.
Call to the scrypt_enc() function in HHVM can lead to heap corruption by using specifically crafted parameters (N, r and p). This happens if the parameters are configurable by an attacker for instance by providing the output of scrypt_enc() in a context where Hack/PHP code would attempt to verify it by re-running scrypt_enc() with the same parameters. This could result in information disclosure, memory being overwriten or crashes of the HHVM process. This issue affects versions 4.3.0, 4.4.0, 4.5.0, 4.6.0, 4.7.0, 4.8.0, versions 3.30.5 and below, and all versions in the 4.0, 4.1, and 4.2 series.
FW-WGS-804HPT v1.305b241111 was discovered to contain a stack overflow via the radDftParamKey parameter in the web_radiusSrv_dftParam_post function.
A heap-based buffer overflow vulnerability exists in the GGUF library gguf_fread_str functionality of llama.cpp Commit 18c2e17. A specially crafted .gguf file can lead to code execution. An attacker can provide a malicious file to trigger this vulnerability.
OMRON CX-Programmer 9.78 and prior is vulnerable to an Out-of-Bounds Write, which may allow an attacker to execute arbitrary code.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_800462c4 in /formAdvFirewall. This vulnerability is triggered via a crafted POST request.
Five buffer overflows in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to initiate a denial-of-service attack and execute arbitrary code.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_80034d60 in /formStaticDHCP. This vulnerability is triggered via a crafted POST request.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_80046eb4 in /formSetPortTr. This vulnerability is triggered via a crafted POST request.
Memory corruption in video due to configuration weakness. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function sub_8003183C in /fromLogin. This vulnerability is triggered via a crafted POST request.
Dnsmasq 2.86 has a heap-based buffer overflow in resize_packet (called from FuzzResizePacket and fuzz_rfc1035.c) because of the lack of a proper bounds check upon pseudo header re-insertion. NOTE: the vendor's position is that CVE-2021-45951 through CVE-2021-45957 "do not represent real vulnerabilities, to the best of our knowledge." However, a contributor states that a security patch (mentioned in 016162.html) is needed
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function sub_80046EB4 in /formSetPortTr. This vulnerability is triggered via a crafted POST request.
Advantech WebAccess versions 9.02 and prior are vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute code.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_8004776c in /formVirtualServ. This vulnerability is triggered via a crafted POST request.
A heap-based overflow vulnerability exists in the PowerPoint document conversion function of Rainbow PDF Office Server Document Converter V7.0 Pro R1 (7,0,2018,1113). While parsing Document Summary Property Set stream, the getSummaryInformation function is incorrectly checking the correlation between size and the number of properties in PropertySet packets, causing an out-of-bounds write that leads to heap corruption and consequent code execution.
Foxit Reader before 10.1.4 and PhantomPDF before 10.1.4 have an out-of-bounds write because the Cross-Reference table is mishandled during Office document conversion.
CODESYS Control Runtime system before 3.5.17.10 has a Heap-based Buffer Overflow.
D-Link DIR-809 devices with firmware through DIR-809Ax_FW1.12WWB03_20190410 were discovered to contain a stack buffer overflow vulnerability in the function FUN_8004776c in /formVirtualApp. This vulnerability is triggered via a crafted POST request.
An issue was discovered in HCC embedded InterNiche 4.0.1. A potential heap buffer overflow exists in the code that parses the HTTP POST request, due to lack of size validation. This vulnerability requires the attacker to send a crafted HTTP POST request with a URI longer than 50 bytes. This leads to a heap overflow in wbs_post() via an strcpy() call.
An Out-of-bounds Write in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to corrupt the memory of IO devices that use the library by sending a malicious RPC packet.
In Boa, there is a possible escalation of privilege due to a stack buffer overflow. This could lead to remote escalation of privilege from a proximal attacker with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: A20210008; Issue ID: OSBNB00123241.
A vulnerability, which was classified as critical, has been found in qinguoyi TinyWebServer up to 1.0. Affected by this issue is some unknown functionality of the file /http/http_conn.cpp. The manipulation of the argument name/password leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
An issue was discovered on Tenda AC11 devices with firmware through 02.03.01.104_CN. A stack buffer overflow vulnerability in /goform/setVLAN allows attackers to execute arbitrary code on the system via a crafted post request.
A vulnerability has been identified in APOGEE MBC (PPC) (BACnet) (All versions), APOGEE MBC (PPC) (P2 Ethernet) (All versions), APOGEE MEC (PPC) (BACnet) (All versions), APOGEE MEC (PPC) (P2 Ethernet) (All versions), APOGEE PXC Compact (BACnet) (All versions < V3.5.4), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.19), APOGEE PXC Modular (BACnet) (All versions < V3.5.4), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.19), Desigo PXC00-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC00-U (All versions >= V2.3 and < V6.30.016), Desigo PXC001-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC100-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC12-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC128-U (All versions >= V2.3 and < V6.30.016), Desigo PXC200-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC22.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC36.1-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC50-E.D (All versions >= V2.3 and < V6.30.016), Desigo PXC64-U (All versions >= V2.3 and < V6.30.016), Desigo PXM20-E (All versions >= V2.3 and < V6.30.016), Nucleus NET (All versions), Nucleus ReadyStart V3 (All versions < V2017.02.4), Nucleus Source Code (All versions), TALON TC Compact (BACnet) (All versions < V3.5.4), TALON TC Modular (BACnet) (All versions < V3.5.4). FTP server does not properly validate the length of the “USER” command, leading to stack-based buffer overflows. This may result in Denial-of-Service conditions and Remote Code Execution. (FSMD-2021-0010)
An Heap-based Buffer Overflow in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to corrupt the memory of IO devices that use the library by sending a malicious RPC packet.
An Out-of-bounds Write in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to corrupt the memory of IO devices that use the library by sending a malicious RPC packet.
In mjs_json.c in Cesanta MongooseOS mJS 1.26, a maliciously formed JSON string can trigger an off-by-one heap-based buffer overflow in mjs_json_parse, which can potentially lead to redirection of control flow. NOTE: the original reporter disputes the significance of this finding because "there isn’t very much of an opportunity to exploit this reliably for an information leak, so there isn’t any real security impact."
A vulnerability has been identified in RUGGEDCOM i800 (All versions < V4.3.7), RUGGEDCOM i801 (All versions < V4.3.7), RUGGEDCOM i802 (All versions < V4.3.7), RUGGEDCOM i803 (All versions < V4.3.7), RUGGEDCOM M2100 (All versions < V4.3.7), RUGGEDCOM M2200 (All versions < V4.3.7), RUGGEDCOM M969 (All versions < V4.3.7), RUGGEDCOM RMC30 (All versions < V4.3.7), RUGGEDCOM RMC8388 V4.X (All versions < V4.3.7), RUGGEDCOM RMC8388 V5.X (All versions < V5.5.4), RUGGEDCOM RP110 (All versions < V4.3.7), RUGGEDCOM RS1600 (All versions < V4.3.7), RUGGEDCOM RS1600F (All versions < V4.3.7), RUGGEDCOM RS1600T (All versions < V4.3.7), RUGGEDCOM RS400 (All versions < V4.3.7), RUGGEDCOM RS401 (All versions < V4.3.7), RUGGEDCOM RS416 (All versions < V4.3.7), RUGGEDCOM RS416P (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.5.4), RUGGEDCOM RS416v2 V4.X (All versions < V4.3.7), RUGGEDCOM RS416v2 V5.X (All versions < 5.5.4), RUGGEDCOM RS8000 (All versions < V4.3.7), RUGGEDCOM RS8000A (All versions < V4.3.7), RUGGEDCOM RS8000H (All versions < V4.3.7), RUGGEDCOM RS8000T (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900G (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RS900GP (All versions < V4.3.7), RUGGEDCOM RS900L (All versions < V4.3.7), RUGGEDCOM RS900W (All versions < V4.3.7), RUGGEDCOM RS910 (All versions < V4.3.7), RUGGEDCOM RS910L (All versions < V4.3.7), RUGGEDCOM RS910W (All versions < V4.3.7), RUGGEDCOM RS920L (All versions < V4.3.7), RUGGEDCOM RS920W (All versions < V4.3.7), RUGGEDCOM RS930L (All versions < V4.3.7), RUGGEDCOM RS930W (All versions < V4.3.7), RUGGEDCOM RS940G (All versions < V4.3.7), RUGGEDCOM RS969 (All versions < V4.3.7), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2100P (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2100PNC (32M) V4.X (All versions < V4.3.7), RUGGEDCOM RSG2100PNC (32M) V5.X (All versions < V5.5.4), RUGGEDCOM RSG2200 (All versions < V4.3.7), RUGGEDCOM RSG2288 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2288 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300 V5.X (All versions < V5.5.4), RUGGEDCOM RSG2300P V4.X (All versions < V4.3.7), RUGGEDCOM RSG2300P V5.X (All versions < V5.5.4), RUGGEDCOM RSG2488 V4.X (All versions < V4.3.7), RUGGEDCOM RSG2488 V5.X (All versions < V5.5.4), RUGGEDCOM RSG907R (All versions < V5.5.4), RUGGEDCOM RSG908C (All versions < V5.5.4), RUGGEDCOM RSG909R (All versions < V5.5.4), RUGGEDCOM RSG910C (All versions < V5.5.4), RUGGEDCOM RSG920P V4.X (All versions < V4.3.7), RUGGEDCOM RSG920P V5.X (All versions < V5.5.4), RUGGEDCOM RSL910 (All versions < V5.5.4), RUGGEDCOM RST2228 (All versions < V5.5.4), RUGGEDCOM RST2228P (All versions < V5.5.4), RUGGEDCOM RST916C (All versions < V5.5.4), RUGGEDCOM RST916P (All versions < V5.5.4). The DHCP client in affected devices fails to properly sanitize incoming DHCP packets. This could allow an unauthenticated remote attacker to cause memory to be overwritten, potentially allowing remote code execution.