Improper input validation in the built-in web server in Moxa NPort IAW5000A-I/O series firmware version 2.2 or earlier may allow a remote attacker to execute commands.

An attacker could leverage an API to pass along a malicious file that could then manipulate the process creation command line in MDT AutoSave versions prior to v6.02.06 and run a command line argument. This could then be leveraged to run a malicious process.

OS command injection vulnerability in Init function in QSAN XEVO allows remote attackers to execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

The async-git package before 1.13.2 for Node.js allows OS Command Injection via shell metacharacters, as demonstrated by git.reset and git.tag.

On D-Link DIR-818LW Rev.A 2.05.B03 and DIR-860L Rev.B 2.03.B03 devices, unauthenticated remote OS command execution can occur in the soap.cgi service of the cgibin binary via an "&&" substring in the service parameter. NOTE: this issue exists because of an incomplete fix for CVE-2018-6530.

An issue was discovered on certain ABUS TVIP cameras. The CGI scripts allow remote attackers to execute code via system() as root. There are several injection points in various scripts.

Zoho ManageEngine ADSelfService Plus through 6102 allows unauthenticated remote code execution in non-English editions.

A security vulnerability has been detected in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this issue is some unknown functionality of the file /htdocs/api/playlist/playsinglefile.php. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

zzzcms zzzphp before 2.0.4 allows remote attackers to execute arbitrary OS commands by placing them in the keys parameter of a ?location=search URI, as demonstrated by an OS command within an "if" "end if" block.

HyperX NGENUITY software is potentially vulnerable to arbitrary code execution. HP is releasing updated software to address the potential vulnerability.

elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Several vulnerabilities affect elFinder 2.1.58. These vulnerabilities can allow an attacker to execute arbitrary code and commands on the server hosting the elFinder PHP connector, even with minimal configuration. The issues were patched in version 2.1.59. As a workaround, ensure the connector is not exposed without authentication.

A weakness has been identified in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this vulnerability is an unknown functionality of the file /htdocs/api/playlist/shuffle.php. Executing manipulation of the argument playlist can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

QuickInstall in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

QSAN SANOS factory reset function does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

The Telenium Online Web Application is vulnerable due to a PHP endpoint accessible to unauthenticated network users that improperly handles user-supplied input. This vulnerability occurs due to the insecure termination of a regular expression check within the endpoint. Because the input is not correctly validated or sanitized, an unauthenticated attacker can inject arbitrary operating system commands through a crafted HTTP request, leading to remote code execution on the server in the context of the web application service account.

The unprivileged user portal part of CentOS Web Panel is affected by a Command Injection vulnerability leading to root Remote Code Execution.

An input validation flaw in the Symantec Security Analytics web UI 7.2 prior 7.2.7, 8.1, prior to 8.1.3-NSR3, 8.2, prior to 8.2.1-NSR2 or 8.2.2 allows a remote, unauthenticated attacker to execute arbitrary OS commands on the target with elevated privileges.

The restricted shell provided by Akkadian Provisioning Manager Engine (PME) can be bypassed by switching the OpenSSH channel from `shell` to `exec` and providing the ssh client a single execution parameter. This issue was resolved in Akkadian OVA appliance version 3.0 (and later), Akkadian Provisioning Manager 5.0.2 (and later), and Akkadian Appliance Manager 3.3.0.314-4a349e0 (and later).

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for FreeBSD), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

In the MMM::Agent::Helpers::Network::clear_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Solaris), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in TOTOLINK X6000R allows OS Command Injection.This issue affects X6000R: through V9.4.0cu.1458_B20250708.

Cursor is a code editor built for programming with AI. Prior to 2.3, hen the Cursor Agent is running in Auto-Run Mode with Allowlist mode enabled, certain shell built-ins can still be executed without appearing in the allowlist and without requiring user approval. This allows an attacker via indirect or direct prompt injection to poison the shell environment by setting, modifying, or removing environment variables that influence trusted commands. This vulnerability is fixed in 2.3.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.12. Affected by this issue is the function SessionController of the file /isomp-protocol/protocol/session of the component SSH Protocol Handler. The manipulation of the argument keypassword leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

The DHCP client on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allows unauthenticated remote code execution as root because /etc/services/INET/inet_ipv4.php mishandles shell metacharacters, affecting generated files such as WAN-1-udhcpc.sh.

MVPower CCTV DVR models, including TV-7104HE 1.8.4 115215B9 and TV7108HE, contain a web shell that is accessible via a /shell URI. A remote unauthenticated attacker can execute arbitrary operating system commands as root. This vulnerability has also been referred to as the "JAWS webserver RCE" because of the easily identifying HTTP response server field. Other firmware versions, at least from 2014 through 2019, can be affected. This was exploited in the wild in 2017 through 2022.

A command injection vulnerability exists in /goform/exeCommand in Tenda W6 V1.0.0.9(4122), which allows attackers to construct cmdinput parameters for arbitrary command execution.

Quectel EG25-G devices through 202006130814 allow executing arbitrary code remotely by using an AT command to place shell metacharacters in quectel_handle_fumo_cfg input in atfwd_daemon.

Affected products contain a vulnerability in the device cloud rpc command handling process that could allow remote attackers to take control over arbitrary devices connected to the cloud.

Certain models of Industrial Cellular Gateway developed by Planet Technology have an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the device.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The application login page in AKIPS Network Monitor 15.37 through 16.5 allows a remote unauthenticated attacker to execute arbitrary OS commands via shell metacharacters in the username parameter (a failed login attempt returns the command-injection output to a limited login failure field). This is fixed in 16.6.

The Post By Email plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the save_attachments function in all versions up to, and including, 1.0.4b. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Linux), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Iron Mountain Archiving Services Inc. EnVision allows Command Injection.This issue affects enVision: before 250563.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The iSherlock developed by Hgiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. This vulnerability has already been exploited. Please update immediately.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Calibre Web, Autocaliweb allows Blind OS Command Injection.This issue affects Calibre Web: 0.6.24 (Nicolette); Autocaliweb: from 0.7.0 before 0.7.1.

A vulnerability classified as critical has been found in D-Link DAR-7000 up to 20240912. Affected is an unknown function of the file /view/DBManage/Backup_Server_commit.php. The manipulation of the argument host leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Moxa’s cellular routers, secure routers, and network security appliances are affected by a critical vulnerability, CVE-2024-9140. This vulnerability allows OS command injection due to improperly restricted commands, potentially enabling attackers to execute arbitrary code. This poses a significant risk to the system’s security and functionality.

A vulnerability, which was classified as critical, has been found in HuangDou UTCMS V9. Affected by this issue is some unknown functionality of the file app/modules/ut-cac/admin/cli.php. The manipulation of the argument o leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The Linear eMerge e3-Series through version 1.00-07 is vulnerable to an OS command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary OS commands via the login_id parameter when invoking the forgot_password functionality over HTTP.

The GitOps Tools Extension for VSCode relies on kubeconfigs in order to communicate with Kubernetes clusters. A specially crafted kubeconfig leads to arbitrary code execution on behalf of the user running VSCode. Users relying on kubeconfigs that are generated or altered by other processes or users are affected by this issue. Please note that the vulnerability is specific to this extension, and the same kubeconfig would not result in arbitrary code execution when used with kubectl. Using only trust-worthy kubeconfigs is a safe mitigation. However, updating to the latest version of the extension is still highly recommended.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows OS Command Injection.This issue affects DX NetOps Spectrum: 23.3.6 and earlier.

A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.

Multiple command injection vulnerabilities exist in the web_server ajax endpoints functionalities of Robustel R1510 3.3.0. A specially-crafted network packets can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.The `/ajax/remove/` API is affected by a command injection vulnerability.

A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_add_zip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been rated as critical. This issue affects the function cgi_FMT_Std2R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.