Learnsite 1.2.5.0 contains a remote privilege escalation vulnerability in /Manager/index.aspx through the JudgIsAdmin() function. By modifying the initial letter of the key of a user cookie, the key of the administrator cookie can be obtained.

An improper authentication vulnerability [CWE-287] in FortiOS versions 7.4.1 and below, versions 7.2.6 and below, and versions 7.0.12 and below when configured with FortiAuthenticator in HA may allow a readonly user to gain read-write access via successive login attempts.

An issue was discovered in OpenText Content Suite Platform 22.1 (16.2.19.1803). The request handler for ll.KeepAliveSession sets a valid AdminPwd cookie even when the Web Admin password was not entered. This allows access to endpoints, which require a valid AdminPwd cookie, without knowing the password.

The All in One SEO WordPress plugin before 4.1.5.3 is affected by a Privilege Escalation issue, which was discovered during an internal audit by the Jetpack Scan team, and may grant bad actors access to protected REST API endpoints they shouldn’t have access to. This could ultimately enable users with low-privileged accounts, like subscribers, to perform remote code execution on affected sites.

Improper input validation in the Intel(R) Data Center Manager Console before version 3.6.2 may allow an authenticated user to potentially enable escalation of privilege via network access.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending malicious commands to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device.

core/get_menudiv.php in Dolibarr before 11.0.4 allows remote authenticated attackers to bypass intended access restrictions via a non-alphanumeric menu parameter.

An Authentication Bypass vulnerability in the SAML Authentication component of BlackBerry Workspaces Server (deployed with Appliance-X) version(s) 10.1, 9.1 and earlier could allow an attacker to potentially gain access to the application in the context of the targeted user’s account.

Improper authentication vulnerability in UDR-JA1604/UDR-JA1608/UDR-JA1616 firmware versions 71x10.1.107112.43A and earlier allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.

A vulnerability was found in Ruijie RG-EW1200G 07161417 r483. It has been rated as critical. Affected by this issue is some unknown functionality of the file /api/sys/login. The manipulation leads to improper authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-237518 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A privilege escalation vulnerability impacting the Google Exposure Notification Verification Server (versions prior to 0.23.1), allows an attacker who (1) has UserWrite permissions and (2) is using a carefully crafted request or malicious proxy, to create another user with higher privileges than their own. This occurs due to insufficient checks on the allowed set of permissions. The new user creation event would be captured in the Event Log.

A Code Execution vulnerability exists in Android prior to 4.4.0 related to the addJavascriptInterface method and the accessibility and accessibilityTraversal objects, which could let a remote malicious user execute arbitrary code.

Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to versions 3.1.43 and 4.0.3, template authors could run restricted static php methods. Users should upgrade to version 3.1.43 or 4.0.3 to receive a patch.

An improper authentication vulnerability has been reported to affect Music Station. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following version: Music Station 5.4.0 and later

A flaw was found in Moodle versions 3.8 before 3.8.3, 3.7 before 3.7.6, 3.6 before 3.6.10, 3.5 before 3.5.12 and earlier unsupported versions. It was possible to create a SCORM package in such a way that when added to a course, it could be interacted with via web services in order to achieve remote code execution.

Improper Input Validation vulnerability in OpenText AppBuilder on Windows, Linux allows OS Command Injection. The AppBuilder's Scheduler functionality that facilitates creation of scheduled tasks is vulnerable to command injection. This allows authenticated users to inject arbitrary operating system commands into the executing process. This issue affects AppBuilder: from 21.2 before 23.2.

Status2k allows Remote Command Execution in admin/options/editpl.php.

** UNSUPPORTED WHEN ASSIGNED **An improper authentication vulnerability [CWE-287] in Fortinet FortiWAN version 5.2.0 through 5.2.1 and version 5.1.1 through 5.1.2 may allow an authenticated attacker to escalate his privileges via HTTP or HTTPs requests with crafted JWT token values.

Improper authorization in some Zoom clients may allow an authorized user to conduct an escalation of privilege via network access.

mixin-deep node module before 1.3.1 suffers from a Modification of Assumed-Immutable Data (MAID) vulnerability, which allows a malicious user to modify the prototype of "Object" via __proto__, causing the addition or modification of an existing property that will exist on all objects.

Improper Authentication in Nextcloud Server prior to version 12.0.3 would allow an attacker that obtained user credentials to bypass the 2 Factor Authentication.

Improper Input Validation vulnerability in N-able N-central allows OS Command Injection.This issue affects N-central: before 2025.3.1.

An issue was discovered in Mattermost Server before 4.7.0, 4.6.2, and 4.5.2. It did not enforce the expiration date of a SAML response.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in Mattermost Server before 4.7.0, 4.6.2, and 4.5.2. An attacker could authenticate to a different user's account via a crafted SAML response.

The (1) get_user and (2) put_user API functions in the Linux kernel before 3.5.5 on the v6k and v7 ARM platforms do not validate certain addresses, which allows attackers to read or modify the contents of arbitrary kernel memory locations via a crafted application, as exploited in the wild against Android devices in October and November 2013.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

The HomeAutomationGateway service in MiCasaVerde VeraLite with firmware 1.5.408 allows (1) remote attackers to execute arbitrary Lua code via a RunLua action in a request to upnp/control/hag on port 49451 or (2) remote authenticated users to execute arbitrary Lua code via a RunLua action in a request to port_49451/upnp/control/hag.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Incorrect Privilege Assignment vulnerability in Hitachi Storage Plug-in for VMware vCenter allows remote authenticated users to cause privilege escalation. This issue affects Hitachi Storage Plug-in for VMware vCenter: from 04.9.0 before 04.9.1.

Improper input validation in Dolibarr ERP CRM <= v18.0.1 fails to strip certain PHP code from user-supplied input when creating a Website, allowing an attacker to inject and evaluate arbitrary PHP code.

JFrog Artifactory prior to version 7.76.2 is vulnerable to Arbitrary File Write of untrusted data, which may lead to DoS or Remote Code Execution when a specially crafted series of requests is sent by an authenticated user. This is due to insufficient validation of artifacts.

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka 'Microsoft Exchange Memory Corruption Vulnerability'.

Improper access control in Citrix Workspace app for Windows 1912 CU1 and 2006.1 causes privilege escalation and code execution when the automatic updater service is running.

Multiple improper input validation vulnerabilities exists in the libnvram.so nvram_import functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted file can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.An improper input validation vulnerability exists in the `httpd`'s `user_define_init` function. Controlling the `user_define_timeout` nvram variable can lead to remote code execution.

Improper authentication in Veeam Backup & Replication 9.5U3, 9.5U4,10.x and 11.x component used for Microsoft System Center Virtual Machine Manager (SCVMM) allows attackers execute arbitrary code via Veeam.Backup.PSManager.exe

Improper Authentication vulnerability in smp7, wp.Insider Simple Membership.This issue affects Simple Membership: from n/a through 4.3.4.

An improper input validation vulnerability of ZOOK software (remote administration tool) could allow a remote attacker to create arbitrary file. The ZOOK viewer has the "Tight file CMD" function to create file. An attacker could create and execute arbitrary file in the ZOOK agent program using "Tight file CMD" without authority.

Improper Input Validation in Eaton's Intelligent Power Manager (IPM) v 1.67 & prior on file name during configuration file import functionality allows attackers to perform command injection or code execution via specially crafted file names while uploading the configuration file in the application.

The sub_451784 function does not validate the parameters entered by the user, resulting in a stack overflow vulnerability in Tenda AC23 v16.03.07.45_cn

Multiple improper input validation vulnerabilities exists in the libnvram.so nvram_import functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted file can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.An improper input validation vulnerability exists in the `httpd`'s `user_define_set_item` function. Controlling the `user_define_timeout` nvram variable can lead to remote code execution.

A flaw was found in SSSD version 1.9.0. The SSSD's access-provider logic causes the result of the HBAC rule processing to be ignored in the event that the access-provider is also handling the setup of the user's SELinux user context.

Jenkins main before 1.482 and LTS before 1.466.2 allows remote attackers with read access and HTTP access to Jenkins master to insert data and execute arbitrary code.

A flaw was found in StarWind Stack. The endpoint for setting a new password doesn’t check the current username and old password. An attacker could reset any local user password (including system/administrator user) using any available user This affects StarWind SAN and NAS v0.2 build 1633.

In Tenda AC23 v16.03.07.45_cn, the formSetIPv6status and formGetWanParameter functions do not authenticate user input parameters, resulting in a post-authentication stack overflow vulnerability.

A vulnerability has been identified in POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10). Affected devices do not properly validate the Language-parameter in requests to the web interface on port 443/tcp. This could allow an authenticated remote attacker to crash the device (followed by an automatic reboot) or to execute arbitrary code on the device.

Databasir is a team-oriented relational database model document management platform. Databasir 1.01 has remote code execution vulnerability. JDBC drivers are not validated prior to use and may be provided by users of the system. This can lead to code execution by any basic user who has access to the system. Users are advised to upgrade. There are no known workarounds to this issue.