Heap-based buffer overflow in the firmware for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access.

D-Link DAP-1325 SetHostIPv6Settings IPv6Mode Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18832.

D-Link DAP-1325 SetAPLanSettings SecondaryDNS Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18830.

D-Link DAP-1325 SetHostIPv6StaticSettings StaticPrefixLength Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18837.

D-Link DAP-2622 DDP Set Date-Time Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20086.

D-Link DAP-1325 SetHostIPv6StaticSettings StaticDefaultGateway Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18834.

D-Link DAP-1325 SetTriggerAPValidate Key Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18839.

D-Link DAP-1325 setDhcpAssignRangeUpdate lan_ipaddr Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18841.

D-Link DAP-1325 SetAPLanSettings PrimaryDNS Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18829.

D-Link DAP-1325 SetAPLanSettings SubnetMask Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18831.

D-Link DIR-3040 HTTP Request Processing Referer Heap-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21671.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Canon imageCLASS MF644Cdw 10.02 printers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CADM service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-15802.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Canon imageCLASS MF644Cdw 10.02 printers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the privet API. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15834.

D-Link DAP-1325 SetHostIPv6StaticSettings StaticAddress Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18833.

ESP-IDF is the official development framework for Espressif SoCs. In Espressif’s Bluetooth Mesh SDK (`ESP-BLE-MESH`), a memory corruption vulnerability can be triggered during provisioning, because there is no check for the `SegN` field of the Transaction Start PDU. This can result in memory corruption related attacks and potentially attacker gaining control of the entire system. Patch commits are available on the 4.1, 4.2, 4.3 and 4.4 branches and users are recommended to upgrade. The upgrade is applicable for all applications and users of `ESP-BLE-MESH` component from `ESP-IDF`. As it is implemented in the Bluetooth Mesh stack, there is no workaround for the user to fix the application layer without upgrading the underlying firmware.

D-Link DAP-1325 setDhcpAssignRangeUpdate lan_ipaddr Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18840.

ASUS RT-AC56U’s configuration function has a heap-based buffer overflow vulnerability due to insufficient validation for the decryption parameter length, which allows an unauthenticated LAN attacker to execute arbitrary code, perform arbitrary operations and disrupt service.

D-Link DIR-3040 HTTP Request Processing Referer Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a fixed size stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21674.

D-Link DAP-1325 SetAPLanSettings Mode Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of XML data provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18828.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.78, D6200 before 1.1.00.32, D7000 before 1.0.1.68, D7800 before 1.0.1.56, DM200 before 1.0.0.61, EX2700 before 1.0.1.52, EX6100v2 before 1.0.1.76, EX6150v2 before 1.0.1.76, EX6200v2 before 1.0.1.74, EX6400 before 1.0.2.140, EX7300 before 1.0.2.140, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7500v2 before 1.0.3.40, R7800 before 1.0.2.62, R8900 before 1.0.4.12, R9000 before 1.0.4.12, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, WN2000RPTv3 before 1.0.1.34, WN3000RPv2 before 1.0.0.78, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.78, WN3100RPv2 before 1.0.0.66, WNR2000v5 before 1.0.0.70, WNR2020 before 1.1.0.62, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.

A vulnerability in the Data Management Engine (DME) of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Exploitation of this vulnerability also requires jumbo frames to be enabled on the interface that receives the crafted Cisco Discovery Protocol packets on the affected device.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability is due to improper validation of string input from certain fields in Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

In certain EZVIZ products, two stack based buffer overflows in mulicast_parse_sadp_packet and mulicast_get_pack_type functions of the SADP multicast protocol can allow an unauthenticated attacker present on the same local network as the camera to achieve remote code execution. This affects CS-C6N-B0-1G2WF Firmware versions before V5.3.0 build 230215 and CS-C6N-R101-1G2WF Firmware versions before V5.3.0 build 230215 and CS-CV310-A0-1B2WFR Firmware versions before V5.3.0 build 230221 and CS-CV310-A0-1C2WFR-C Firmware versions before V5.3.2 build 230221 and CS-C6N-A0-1C2WFR-MUL Firmware versions before V5.3.2 build 230218 and CS-CV310-A0-3C2WFRL-1080p Firmware versions before V5.2.7 build 230302 and CS-CV310-A0-1C2WFR Wifi IP66 2.8mm 1080p Firmware versions before V5.3.2 build 230214 and CS-CV248-A0-32WMFR Firmware versions before V5.2.3 build 230217 and EZVIZ LC1C Firmware versions before V5.3.4 build 230214.

NETGEAR RAX30 soap_serverd Stack-based Buffer Overflow Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the soap_serverd binary. When parsing SOAP message headers, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-19839.

upnpd on certain NETGEAR devices allows remote (LAN) attackers to execute arbitrary code via a stack-based buffer overflow. This affects R6400v2 V1.0.4.102_10.0.75, R6400 V1.0.1.62_1.0.41, R7000P V1.3.2.126_10.1.66, XR300 V1.0.3.50_10.3.36, R8000 V1.0.4.62, R8300 V1.0.2.136, R8500 V1.0.2.136, R7300DST V1.0.0.74, R7850 V1.0.5.64, R7900 V1.0.4.30, RAX20 V1.0.2.64, RAX80 V1.0.3.102, and R6250 V1.0.4.44.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been rated as critical. This issue affects the function auth_asp of the file /auth.asp of the component jhttpd. The manipulation of the argument callback leads to stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been disclosed to the public and may be used.

Improper handling of the full-buffer case in the Zephyr Bluetooth implementation can result in memory corruption. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions.

Missing Size Checks in Bluetooth HCI over SPI. Zephyr versions >= v1.14.2, >= v2.2.0 contain Improper Handling of Length Parameter Inconsistency (CWE-130). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hg2w-62p6-g67c

In build_read_multi_rsp of gatt_sr.cc, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. By supplying a vendor information element with a data length larger than 32 bytes, a heap buffer overflow is triggered in wlc_wpa_sup_eapol. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

In transcodeQ*ToFloat of btif_avrcp_audio_track.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to paired device escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

The Broadcom wl WiFi driver is vulnerable to a heap buffer overflow. If the vendor information element data length is larger than 164 bytes, a heap buffer overflow is triggered in wlc_wpa_plumb_gtk. In the worst case scenario, by sending specially-crafted WiFi packets, a remote, unauthenticated attacker may be able to execute arbitrary code on a vulnerable system. More typically, this vulnerability will result in denial-of-service conditions.

A heap-based buffer overflow was discovered in bluetoothd in BlueZ through 5.48. There isn't any check on whether there is enough space in the destination buffer. The function simply appends all data passed to it. The values of all attributes that are requested are appended to the output buffer. There are no size checks whatsoever, resulting in a simple heap overflow if one can craft a request where the response is large enough to overflow the preallocated buffer. This issue exists in service_attr_req gets called by process_request (in sdpd-request.c), which also allocates the response buffer.

The ABB IDAL HTTP server is vulnerable to a buffer overflow when a long Host header is sent in a web request. The Host header value overflows a buffer and overwrites a Structured Exception Handler (SEH) address. An unauthenticated attacker can submit a Host header value of 2047 bytes or more to overflow the buffer and overwrite the SEH address, which can then be leveraged to execute attacker-controlled code on the server.

Actiontec WCB6200Q uh_get_postdata_withupload Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21418.

Heap out-of-bound write vulnerability in Exynos baseband prior to SMR Jun-2023 Release 1 allows remote attacker to execute arbitrary code.

A flaw that allowed an attacker to corrupt memory and possibly escalate privileges was found in the mwifiex kernel module while connecting to a malicious wireless network.

D-Link DAP-2622 DDP Set IPv4 Address Auth Username Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20090.

AMI’s SPx contains a vulnerability in the BMC where an Attacker may cause a heap memory corruption via an adjacent network. A successful exploitation of this vulnerability may lead to a loss of confidentiality, integrity, and/or availability.

AMI’s SPx contains a vulnerability in the BMC where an Attacker may cause a stack-based buffer overflow via an adjacent network. A successful exploitation of this vulnerability may lead to a loss of confidentiality, integrity, and/or availability.

D-Link DAP-2622 DDP Set IPv6 Address Auth Username Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20092.

D-Link DAP-2622 DDP Set IPv6 Address Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20097.

D-Link DAP-2622 DDP Set IPv6 Address Secondary DNS Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20096.