Dell PowerStore, versions prior to 3.0.0.0, contains an OS Command Injection vulnerability in PowerStore T environment. A locally authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS command on the PowerStore underlying OS. Exploiting may lead to a system take over by an attacker.

Dell Container Storage Modules 1.2 contains an OS command injection in goiscsi and gobrick libraries. A remote authenticated malicious user with low privileges could exploit this vulnerability leading to to execute arbitrary OS commands on the affected system.

Dell PowerProtect DD, versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 on DDMC contain an OS command injection vulnerability in an admin operation. A local high privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the managed system application's underlying OS with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker on a managed system of DDMC.

Dell EMC PowerStore versions 2.0.0.x, 2.0.1.x, and 2.1.0.x are vulnerable to a command injection flaw. An authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system takeover by an attacker.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_tcpdump utility. An authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands with elevated privileges.

Dell EMC PowerStore, contains an OS command injection Vulnerability. A locally authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the PowerStore underlying OS, with the privileges of the vulnerable application. Exploitation may lead to an elevation of privilege.

Dell PowerProtect DD , versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in administrator CLI. A local high privileged attacker could potentially exploit this vulnerability, to bypass security restrictions. Exploitation may lead to a system take over by an attacker

Dell PowerProtect DD, versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in the CLI. A local low privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

Dell VNX2 for File version 8.1.21.266 and earlier, contain a privilege escalation vulnerability. A local malicious admin may potentially exploit vulnerability and gain elevated privileges.

An issue was discovered in LibreNMS through 1.47. There is a command injection vulnerability in html/includes/graphs/device/collectd.inc.php where user supplied parameters are filtered with the mysqli_escape_real_string function. This function is not the appropriate function to sanitize command arguments as it does not escape a number of command line syntax characters such as ` (backtick), allowing an attacker to inject commands into the variable $rrd_cmd, which gets executed via passthru().

An issue was discovered in Poly (formerly Polycom) HDX 3.1.13. A feature exists that allows the creation of a server / client certificate, or the upload of the user certificate, on the administrator's page. The value received from the user is the factor value of a shell script on the equipment. By entering a special character (such as a single quote) in a CN or other CSR field, one can insert a command into a factor value. A system command can be executed as root.

Aruba AirWave before 7.7.14.2 and 8.x before 8.0.7 allows VisualRF remote OS command execution and file disclosure by administrative users.

Geutebruck IP Cameras G-Code(EEC-2xxx), G-Cam(EBC-21xx/EFD-22xx/ETHC-22xx/EWPC-22xx): All versions 1.12.0.25 and prior may allow a remote authenticated user, using a specially crafted URL command, to execute commands as root.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new VXLAN configurations. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

On Reolink RLC-410W, C1 Pro, C2 Pro, RLC-422W, and RLC-511W devices through 1.0.227, an authenticated admin can use the "TestEmail" functionality to inject and run OS commands as root, as demonstrated by shell metacharacters in the addr1 field.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new SNMP users. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

The websocket configuration endpoint of the Loxone Miniserver Go Gen.2 before 14.1.5.9 allows remote authenticated administrators to inject arbitrary OS commands via the timezone parameter.

1Panel is an open source Linux server operation and maintenance management panel. An OS command injection vulnerability exists in 1Panel firewall functionality. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. 1Panel firewall functionality `/hosts/firewall/ip` endpoint read user input without validation, the attacker extends the default functionality of the application, which execute system commands. An attacker can execute arbitrary code on the target system, which can lead to a complete compromise of the system. This issue has been addressed in commit `e17b80cff49` which is included in release version `1.4.3`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4, 8.3RX before 8.3R7.1, 8.2RX before 8.2R12.1, and 8.1RX before 8.1R15.1 and Pulse Policy Secure version 9.0RX before 9.0R3.2, 5.4RX before 5.4R7.1, 5.3RX before 5.3R12.1, 5.2RX before 5.2R12.1, and 5.1RX before 5.1R15.1, the admin web interface allows an authenticated attacker to inject and execute commands.

IBM Security Verify Governance, Identity Manager 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 257873.

OS Command Injection in Packagist microweber/microweber prior to 1.2.11.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset `0x4bde44`.

An OS command injection vulnerability exists in the web interface configuration upload functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A post-authentication command injection vulnerability exists in the PPTP client functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability and gain access to an unrestricted shell.

SUNNET WMPro portal's file management function has a vulnerability of insufficient filtering for user input. A remote attacker with administrator privilege or a privileged account can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operations or disrupt service.

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8.

A vulnerability was found in Ruijie RG-BCR860 2.5.13 and classified as critical. This issue affects some unknown processing of the component Network Diagnostic Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-232547. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation in the certificate-generation function, which could potentially allow malicious users to execute remote code on affected devices.

IBM Security Verify Governance 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 256036.

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.  

A valid, authenticated LXCA user with elevated privileges may be able to execute command injections through crafted calls to a specific web API.

Cacti is an open source performance and fault management framework. Due to a flaw in multi-line SNMP result parser, authenticated users can inject malformed OIDs in the response. When processed by ss_net_snmp_disk_io() or ss_net_snmp_disk_bytes(), a part of each OID will be used as a key in an array that is used as part of a system command, causing a command execution vulnerability. This vulnerability is fixed in 1.2.29.

An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.

Geutebruck IP Cameras G-Code(EEC-2xxx), G-Cam(EBC-21xx/EFD-22xx/ETHC-22xx/EWPC-22xx): All versions 1.12.0.25 and prior may allow a remote authenticated attacker with access to network configuration to supply system commands to the server, leading to remote code execution as root.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A weakness has been identified in D-Link DNS-320 2.06B01. This impacts the function cgi_set_host/cgi_set_ntp/cgi_fan_control/cgi_merge_user of the file /cgi-bin/system_mgr.cgi. This manipulation causes os command injection. It is possible to initiate the attack remotely.

A security flaw has been discovered in D-Link DNS-320 2.06B01. This affects the function delete/rename/copy/move/chmod/chown of the file /cgi-bin/webfile_mgr.cgi. The manipulation results in os command injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

Improper input handling in a wireless-control administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

A security vulnerability has been detected in Tenda AC6 15.03.06.23. Affected by this issue is the function get_log_file of the file /goform/getLogFile of the component httpd. The manipulation of the argument wans.flag leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG2600HP2, WG2600HP, WG2200HP, WG1800HP2, WG1800HP, WG1400HP, WG600HP, WG300HP, WF300HP, WR9500N, WR9300N, WR8750N, WR8700N, WR8600N, WR8370N, WR8175N and WR8170N all versions allows a attacker to execute an arbitrary OS command with the root privilege, after obtaining a high privilege exploiting CVE-2023-3330 and CVE-2023-3331 vulnerabilities.

A vulnerability was identified in D-Link DNS-320 2.06B01. The impacted element is the function cgi_speed/cgi_dhcpd_lease/cgi_ddns/cgi_set_ip/cgi_upnp_del/cgi_dhcpd/cgi_upnp_add/cgi_upnp_edit of the file /cgi-bin/network_mgr.cgi. The manipulation leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

Improper neutralization of inputs used in an OS command in the FSx Windows File Server volume mounting component in Amazon ECS Agent on Windows before version 1.103.0 might allow a remote authenticated threat actor to execute shell commands with SYSTEM privileges on the underlying host via a specially crafted username field in an ECS task definition. This issue requires permissions to register ECS task definitions or write to the Secrets Manager or SSM Parameter Store credentials used by the FSx volume configuration. To remediate this issue, users should upgrade to version 1.103.0.

OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340/D440 provided by Y'S corporation. A user with an administrative privilege who logged in to the web management page of the affected product may execute an arbitrary OS command.

A flaw has been found in TRENDnet TEW-811DRU 1.0.2.0. This affects the function setDeviceURL  of the file uapply.cgi of the component httpd . This manipulation of the argument DeviceURL causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0

A vulnerability has been found in Tenda AC6 2.0/15.03.06.23. The affected element is an unknown function of the file /goform/telnet of the component httpd. The manipulation of the argument lan.ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

An issue was discovered in Veritas InfoScale Operations Manager (VIOM) before 7.4.2.800 and 8.x before 8.0.410. The VIOM web application does not validate user-supplied data and appends it to OS commands and internal binaries used by the application. An attacker with root/administrator level privileges can leverage this to read sensitive data stored on the servers, modify data or server configuration, and delete data or application configuration.

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

OS command injection in Ivanti Virtual Traffic Manager before version 22.9r4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.