An OS command injection vulnerability exists in the web interface mac2name functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8.
An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
An issue was discovered in Peplink Balance Two before 8.4.0. Command injection in the traceroute feature of the administration console allows users with admin privileges to execute arbitrary commands as root.
A data integrity vulnerability exists in the web interface /cgi-bin/upload_config.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to configuration modification. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.
The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to authenticated command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/device_Form?script/.
Command Injection vulnerability in McAfee Enterprise Security Manager (ESM) prior to 11.2.0 and prior to 10.4.0 allows authenticated user to execute arbitrary code via specially crafted parameters.
Nagios Network Analyzer versions prior to 2024R2.0.1 contain a vulnerability in the LDAP certificate management functionality whereby the certificate removal operation fails to apply adequate input sanitation. An authenticated administrator can trigger command execution on the underlying host in the context of the web application service, resulting in remote code execution with the service's privileges.
Coolify versions prior to v4.0.0-beta.420.7 are vulnerable to a remote code execution vulnerability in the project deployment workflow. The platform allows authenticated users, with low-level member privileges, to inject arbitrary shell commands via the Git Repository field during project creation. By submitting a crafted repository string containing command injection syntax, an attacker can execute arbitrary commands on the underlying host system, resulting in full server compromise.
FaceSentry 6.4.8 contains an authenticated remote command injection vulnerability in pingTest.php and tcpPortTest.php scripts. Attackers can exploit unsanitized input parameters to inject and execute arbitrary shell commands with root privileges by manipulating the 'strInIP' and 'strInPort' parameters.
An OS command injection vulnerability exists in the Blue Angel Software Suite running on embedded Linux devices via the ping_addr parameter in the webctrl.cgi script. The application fails to properly sanitize input before passing it to the system-level ping command. An authenticated attacker can inject arbitrary commands by appending shell metacharacters to the ping_addr parameter in a crafted GET request to /cgi-bin/webctrl.cgi?action=pingtest_update. The command's output is reflected in the application's web interface, enabling attackers to view results directly. Default and backdoor credentials can be used to access the interface and exploit the issue. Successful exploitation results in arbitrary command execution as the root user. Exploitation evidence was observed by the Shadowserver Foundation on 2025-01-26 UTC.
SmartLiving SmartLAN <=6.x contains an authenticated remote command injection vulnerability in the web.cgi binary through the 'par' POST parameter with the 'testemail' module. Attackers can exploit the unsanitized parameter and system() function call to execute arbitrary system commands with root privileges using default credentials.
A vulnerability classified as critical was found in DedeCMS 5.7.111. This vulnerability affects the function AddMyAddon of the file album_add.php. The manipulation of the argument albumUploadFiles leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-240940.
A vulnerability has been found in ajenti 2.1.31 and classified as critical. This vulnerability affects unknown code of the component API. The manipulation leads to privilege escalation. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.32 is able to address this issue. The name of the patch is 7aa146b724e0e20cfee2c71ca78fafbf53a8767c. It is recommended to upgrade the affected component.
Cacti is an open source performance and fault management framework. Due to a flaw in multi-line SNMP result parser, authenticated users can inject malformed OIDs in the response. When processed by ss_net_snmp_disk_io() or ss_net_snmp_disk_bytes(), a part of each OID will be used as a key in an array that is used as part of a system command, causing a command execution vulnerability. This vulnerability is fixed in 1.2.29.
Authenticated Semi-Blind Command Injection (via Parameter Injection) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via the getlogs.cgi tcpdump feature. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.
Ilevia EVE X1/X5 Server version ≤ 4.7.18.0.eden contains a misconfiguration in the sudoers file that allows passwordless execution of certain Bash scripts. If these scripts are writable by web-facing users or accessible via command injection, attackers can replace them with malicious payloads. Execution with sudo grants full root access, resulting in remote privilege escalation and potential system compromise.
Incorrect input sanitation in text-oriented user interfaces (telnet, ssh) in Swisscom Centro Grande before 6.16.12 allows remote authenticated users to execute arbitrary commands via command injection.
Remote code execution in the modules component in Yakamara Media Redaxo CMS version 5.12.1 allows an authenticated CMS user to execute code on the hosting system via a module containing malicious PHP code.
sa-exim 4.2.1 allows attackers to execute arbitrary code if they can write a .cf file or a rule. This occurs because Greylisting.pm relies on eval (rather than direct parsing and/or use of the taint feature). This issue is similar to CVE-2018-11805.
BMC Control-M/Agent 7.0.00.000 allows OS Command Injection (issue 2 of 2).
A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.
Zoho ManageEngine Asset Explorer 6.5 does not validate the System Center Configuration Manager (SCCM) database username when dynamically generating a command to schedule scans for SCCM. This allows an attacker to execute arbitrary commands on the AssetExplorer Server with NT AUTHORITY/SYSTEM privileges.
An issue was discovered in rConfig 3.9.3. A remote authenticated user can directly execute system commands by sending a GET request to ajaxArchiveFiles.php because the path parameter is passed to the exec function without filtering, which can lead to command execution.
On SuperMicro X8STi-F motherboards with IPMI firmware 2.06 and BIOS 02.68, the Virtual Media feature allows OS Command Injection by authenticated attackers who can send HTTP requests to the IPMI IP address. This requires a POST to /rpc/setvmdrive.asp with shell metacharacters in ShareHost or ShareName. The attacker can achieve a persistent backdoor.
An issue discovered in TenghuTOS TWS-200 firmware version:V4.0-201809201424 allows a remote attacker to execute arbitrary code via crafted command on the ping page component.
resources/cmd.php in FusionPBX up to 4.5.7 suffers from a command injection vulnerability due to a lack of input validation, which allows authenticated administrative attackers to execute any commands on the host as www-data.
Centreon 19.04 allows attackers to execute arbitrary OS commands via the Command Line field of main.php?p=60807&type=4 (aka the Configuration > Commands > Discovery screen). CVE-2019-17501 and CVE-2019-16405 are similar to one another and may be the same.
Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.
Command injection in PAN-0S 9.0.2 and earlier may allow an authenticated attacker to gain access to a remote shell in PAN-OS, and potentially run with the escalated user’s permissions.
A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.
reNgine before 2.1.2 allows OS Command Injection if an adversary has a valid session ID. The attack places shell metacharacters in an api/tools/waf_detector/?url= string. The commands are executed as root via subprocess.check_output.
IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.
An authenticated command injection vulnerability in Weintek cMT2078X easyweb Web Version v2.1.3, OS v20220215 allows attackers to execute arbitrary code or access sensitive information via injecting a crafted payload into the HMI Name parameter.
A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.0), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.0), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.0), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.0), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.0), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.0), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.0), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.0), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.0), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.0), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.0), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.0), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.0), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.0), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.0), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.0), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.0), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.0), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.0), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.0). An Improper Neutralization of Special Elements used in an OS Command with root privileges vulnerability exists in the handling of the DDNS configuration. This could allow malicious local administrators to issue commands on system level after a successful IP address update.
Three os command injection vulnerabilities exist in the boa formWsc functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `localPin` request's parameter.
A flaw was found in pgAdmin. This issue occurs when the pgAdmin server HTTP API validates the path a user selects to external PostgreSQL utilities such as pg_dump and pg_restore. Versions of pgAdmin prior to 7.6 failed to properly control the server code executed on this API, allowing an authenticated user to run arbitrary commands on the server.
Authenticated user can execute arbitrary commands in the context of the root user by providing payload in the "destination" field of the network test tools. This is similar to the vulnerability CVE-2021-28151 mitigated on the user interface level by blacklisting characters with JavaScript, however, it can still be exploited by sending POST requests directly.
An OS command injection vulnerability exists in AE1021PE firmware version 2.0.9 and earlier and AE1021 firmware version 2.0.9 and earlier. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker who can log in to the product.
A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V7.2.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V7.2.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V7.2.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V7.2.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V7.2.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V7.2.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V7.2.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V7.2.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V7.2.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V7.2.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V7.2.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V7.2.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V7.2.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V7.2.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V7.2.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V7.2.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V7.2.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V7.2.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V7.2.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V7.2.2). An Improper Neutralization of Special Elements used in an OS Command with root privileges vulnerability exists in the parsing of the IPSEC configuration. This could allow malicious local administrators to issue commands on system level after a new connection is established.
badmonkey, a Security Researcher has found a flaw that allows for a authenticated command injection on the camera. An attacker could inject malicious into request packets to execute command. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds.
Three os command injection vulnerabilities exist in the boa formWsc functionality of Realtek rtl819x Jungle SDK v3.4.11. A specially crafted series of HTTP requests can lead to arbitrary command execution. An attacker can send a series of HTTP requests to trigger these vulnerabilities.This command injection is related to the `targetAPSsid` request's parameter.
A command injection vulnerability was reported in the Integrated Management Module (IMM) of legacy IBM System x 3550 M3 and IBM System x 3650 M3 servers that could allow the execution of operating system commands over an authenticated SSH or Telnet session.
trixbox 2.8.0.4 has OS command injection via shell metacharacters in the lang parameter to /maint/modules/home/index.php.
A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the save command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the save command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user.
Dell vApp Manager, versions prior to 9.2.4.x contain a command injection vulnerability. A remote malicious user with high privileges could potentially exploit this vulnerability leading to the execution of arbitrary OS commands on the affected system.
An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the remoteNetmask0= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability.