In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ll_ts_intr Recent versions of the E810 firmware have support for an extra interrupt to handle report of the "low latency" Tx timestamps coming from the specialized low latency firmware interface. Instead of polling the registers, software can wait until the low latency interrupt is fired. This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ll_ts_intr() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the issues fixed in the ice_ptp_ts_irq() function. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix UAF on sva unbind with pending IOPFs Commit 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path") disables IOPF on device by removing the device from its IOMMU's IOPF queue when the last IOPF-capable domain is detached from the device. Unfortunately, it did this in a wrong place where there are still pending IOPFs. As a result, a use-after-free error is potentially triggered and eventually a kernel panic with a kernel trace similar to the following: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 313 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0 Workqueue: iopf_queue/dmar0-iopfq iommu_sva_handle_iopf Call Trace: <TASK> iopf_free_group+0xe/0x20 process_one_work+0x197/0x3d0 worker_thread+0x23a/0x350 ? rescuer_thread+0x4a0/0x4a0 kthread+0xf8/0x230 ? finish_task_switch.isra.0+0x81/0x260 ? kthreads_online_cpu+0x110/0x110 ? kthreads_online_cpu+0x110/0x110 ret_from_fork+0x13b/0x170 ? kthreads_online_cpu+0x110/0x110 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- The intel_pasid_tear_down_entry() function is responsible for blocking hardware from generating new page faults and flushing all in-flight ones. Therefore, moving iopf_for_domain_remove() after this function should resolve this.

In the Linux kernel, the following vulnerability has been resolved: net: libwx: remove duplicate page_pool_put_full_page() page_pool_put_full_page() should only be invoked when freeing Rx buffers or building a skb if the size is too short. At other times, the pages need to be reused. So remove the redundant page put. In the original code, double free pages cause kernel panic: [ 876.949834] __irq_exit_rcu+0xc7/0x130 [ 876.949836] common_interrupt+0xb8/0xd0 [ 876.949838] </IRQ> [ 876.949838] <TASK> [ 876.949840] asm_common_interrupt+0x22/0x40 [ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246 [ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000 [ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e [ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed [ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580 [ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000 [ 876.949852] ? cpuidle_enter_state+0xb3/0x420 [ 876.949855] cpuidle_enter+0x29/0x40 [ 876.949857] cpuidle_idle_call+0xfd/0x170 [ 876.949859] do_idle+0x7a/0xc0 [ 876.949861] cpu_startup_entry+0x25/0x30 [ 876.949862] start_secondary+0x117/0x140 [ 876.949864] common_startup_64+0x13e/0x148 [ 876.949867] </TASK> [ 876.949868] ---[ end trace 0000000000000000 ]--- [ 876.949869] ------------[ cut here ]------------ [ 876.949870] list_del corruption, ffffead40445a348->next is NULL [ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120 [ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E) [ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi [ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary) [ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE [ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120 [ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8 [ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282 [ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000 [ 876.949942] RDX: 0000000000000105 RSI: 00000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: parisc: Fix double SIGFPE crash Camm noticed that on parisc a SIGFPE exception will crash an application with a second SIGFPE in the signal handler. Dave analyzed it, and it happens because glibc uses a double-word floating-point store to atomically update function descriptors. As a result of lazy binding, we hit a floating-point store in fpe_func almost immediately. When the T bit is set, an assist exception trap occurs when when the co-processor encounters *any* floating-point instruction except for a double store of register %fr0. The latter cancels all pending traps. Let's fix this by clearing the Trap (T) bit in the FP status register before returning to the signal handler in userspace. The issue can be reproduced with this test program: root@parisc:~# cat fpe.c static void fpe_func(int sig, siginfo_t *i, void *v) { sigset_t set; sigemptyset(&set); sigaddset(&set, SIGFPE); sigprocmask(SIG_UNBLOCK, &set, NULL); printf("GOT signal %d with si_code %ld\n", sig, i->si_code); } int main() { struct sigaction action = { .sa_sigaction = fpe_func, .sa_flags = SA_RESTART|SA_SIGINFO }; sigaction(SIGFPE, &action, 0); feenableexcept(FE_OVERFLOW); return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308); } root@parisc:~# gcc fpe.c -lm root@parisc:~# ./a.out Floating point exception root@parisc:~# strace -f ./a.out execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 ... rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} --- --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} --- +++ killed by SIGFPE +++ Floating point exception

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix dangling pointer in krb_authenticate krb_authenticate frees sess->user and does not set the pointer to NULL. It calls ksmbd_krb5_authenticate to reinitialise sess->user but that function may return without doing so. If that happens then smb2_sess_setup, which calls krb_authenticate, will be accessing free'd memory when it later uses sess->user.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in kerberos authentication Setting sess->user = NULL was introduced to fix the dangling pointer created by ksmbd_free_user. However, it is possible another thread could be operating on the session and make use of sess->user after it has been passed to ksmbd_free_user but before sess->user is set to NULL.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.

In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac.

In the Linux kernel, the following vulnerability has been resolved: net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely.

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix smp_processor_id() call trace for preemptible kernels Correct kernel call trace when calling smp_processor_id() when called in preemptible kernels by using raw_smp_processor_id(). smp_processor_id() checks to see if preemption is disabled and if not, issue an error message followed by a call to dump_stack(). Brief example of call trace: kernel: check_preemption_disabled: 436 callbacks suppressed kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u1025:0/2354 kernel: caller is pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: CPU: 129 PID: 2354 Comm: kworker/u1025:0 kernel: ... kernel: Workqueue: writeback wb_workfn (flush-253:0) kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x34/0x48 kernel: check_preemption_disabled+0xdd/0xe0 kernel: pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: ...

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reset IRTE to host control if *new* route isn't postable Restore an IRTE back to host control (remapped or posted MSI mode) if the *new* GSI route prevents posting the IRQ directly to a vCPU, regardless of the GSI routing type. Updating the IRTE if and only if the new GSI is an MSI results in KVM leaving an IRTE posting to a vCPU. The dangling IRTE can result in interrupts being incorrectly delivered to the guest, and in the worst case scenario can result in use-after-free, e.g. if the VM is torn down, but the underlying host IRQ isn't freed.

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated via devm_kzalloc() to store touch bar keyboard related data. Later on if backlight_device_get_by_name() finds a backlight device with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup with appletb_inactivity_timer() and the timer is armed to run after appletb_tb_dim_timeout (60) seconds. A use-after-free is triggered when failure occurs after the timer is armed. This ultimately means probe failure occurs and as a result the "struct appletb_kbd *kbd" which is device managed memory is freed. After 60 seconds the timer will have expired and __run_timers will attempt to access the timer (kbd->inactivity_timer) however the kdb structure has been freed causing a use-after free. [ 71.636938] ================================================================== [ 71.637915] BUG: KASAN: slab-use-after-free in __run_timers+0x7ad/0x890 [ 71.637915] Write of size 8 at addr ffff8881178c5958 by task swapper/1/0 [ 71.637915] [ 71.637915] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.16.0-rc2-00318-g739a6c93cc75-dirty #12 PREEMPT(voluntary) [ 71.637915] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 71.637915] Call Trace: [ 71.637915] <IRQ> [ 71.637915] dump_stack_lvl+0x53/0x70 [ 71.637915] print_report+0xce/0x670 [ 71.637915] ? __run_timers+0x7ad/0x890 [ 71.637915] kasan_report+0xce/0x100 [ 71.637915] ? __run_timers+0x7ad/0x890 [ 71.637915] __run_timers+0x7ad/0x890 [ 71.637915] ? __pfx___run_timers+0x10/0x10 [ 71.637915] ? update_process_times+0xfc/0x190 [ 71.637915] ? __pfx_update_process_times+0x10/0x10 [ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0 [ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0 [ 71.637915] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 71.637915] run_timer_softirq+0x141/0x240 [ 71.637915] ? __pfx_run_timer_softirq+0x10/0x10 [ 71.637915] ? __pfx___hrtimer_run_queues+0x10/0x10 [ 71.637915] ? kvm_clock_get_cycles+0x18/0x30 [ 71.637915] ? ktime_get+0x60/0x140 [ 71.637915] handle_softirqs+0x1b8/0x5c0 [ 71.637915] ? __pfx_handle_softirqs+0x10/0x10 [ 71.637915] irq_exit_rcu+0xaf/0xe0 [ 71.637915] sysvec_apic_timer_interrupt+0x6c/0x80 [ 71.637915] </IRQ> [ 71.637915] [ 71.637915] Allocated by task 39: [ 71.637915] kasan_save_stack+0x33/0x60 [ 71.637915] kasan_save_track+0x14/0x30 [ 71.637915] __kasan_kmalloc+0x8f/0xa0 [ 71.637915] __kmalloc_node_track_caller_noprof+0x195/0x420 [ 71.637915] devm_kmalloc+0x74/0x1e0 [ 71.637915] appletb_kbd_probe+0x37/0x3c0 [ 71.637915] hid_device_probe+0x2d1/0x680 [ 71.637915] really_probe+0x1c3/0x690 [ 71.637915] __driver_probe_device+0x247/0x300 [ 71.637915] driver_probe_device+0x49/0x210 [...] [ 71.637915] [ 71.637915] Freed by task 39: [ 71.637915] kasan_save_stack+0x33/0x60 [ 71.637915] kasan_save_track+0x14/0x30 [ 71.637915] kasan_save_free_info+0x3b/0x60 [ 71.637915] __kasan_slab_free+0x37/0x50 [ 71.637915] kfree+0xcf/0x360 [ 71.637915] devres_release_group+0x1f8/0x3c0 [ 71.637915] hid_device_probe+0x315/0x680 [ 71.637915] really_probe+0x1c3/0x690 [ 71.637915] __driver_probe_device+0x247/0x300 [ 71.637915] driver_probe_device+0x49/0x210 [...] The root cause of the issue is that the timer is not disarmed on failure paths leading to it remaining active and accessing freed memory. To fix this call timer_delete_sync() to deactivate the timer. Another small issue is that timer_delete_sync is called unconditionally in appletb_kbd_remove(), fix this by checking for a valid kbd->backlight_dev before calling timer_delete_sync.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case). This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done Syzbot reported a slab-use-after-free with the following call trace: ================================================================== BUG: KASAN: slab-use-after-free in tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840 Read of size 8 at addr ffff88807a733000 by task kworker/1:0/25 Call Trace: kasan_report+0xd9/0x110 mm/kasan/report.c:601 tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840 crypto_request_complete include/crypto/algapi.h:266 aead_request_complete include/crypto/internal/aead.h:85 cryptd_aead_crypt+0x3b8/0x750 crypto/cryptd.c:772 crypto_request_complete include/crypto/algapi.h:266 cryptd_queue_worker+0x131/0x200 crypto/cryptd.c:181 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 Allocated by task 8355: kzalloc_noprof include/linux/slab.h:778 tipc_crypto_start+0xcc/0x9e0 net/tipc/crypto.c:1466 tipc_init_net+0x2dd/0x430 net/tipc/core.c:72 ops_init+0xb9/0x650 net/core/net_namespace.c:139 setup_net+0x435/0xb40 net/core/net_namespace.c:343 copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508 create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228 ksys_unshare+0x419/0x970 kernel/fork.c:3323 __do_sys_unshare kernel/fork.c:3394 Freed by task 63: kfree+0x12a/0x3b0 mm/slub.c:4557 tipc_crypto_stop+0x23c/0x500 net/tipc/crypto.c:1539 tipc_exit_net+0x8c/0x110 net/tipc/core.c:119 ops_exit_list+0xb0/0x180 net/core/net_namespace.c:173 cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 After freed the tipc_crypto tx by delete namespace, tipc_aead_encrypt_done may still visit it in cryptd_queue_worker workqueue. I reproduce this issue by: ip netns add ns1 ip link add veth1 type veth peer name veth2 ip link set veth1 netns ns1 ip netns exec ns1 tipc bearer enable media eth dev veth1 ip netns exec ns1 tipc node set key this_is_a_master_key master ip netns exec ns1 tipc bearer disable media eth dev veth1 ip netns del ns1 The key of reproduction is that, simd_aead_encrypt is interrupted, leading to crypto_simd_usable() return false. Thus, the cryptd_queue_worker is triggered, and the tipc_crypto tx will be visited. tipc_disc_timeout tipc_bearer_xmit_skb tipc_crypto_xmit tipc_aead_encrypt crypto_aead_encrypt // encrypt() simd_aead_encrypt // crypto_simd_usable() is false child = &ctx->cryptd_tfm->base; simd_aead_encrypt crypto_aead_encrypt // encrypt() cryptd_aead_encrypt_enqueue cryptd_aead_enqueue cryptd_enqueue_request // trigger cryptd_queue_worker queue_work_on(smp_processor_id(), cryptd_wq, &cpu_queue->work) Fix this by holding net reference count before encrypt.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix sc7280 lpass potential buffer overflow Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34

In the Linux kernel, the following vulnerability has been resolved: powerpc64/ftrace: fix clobbered r15 during livepatching While r15 is clobbered always with PPC_FTRACE_OUT_OF_LINE, it is not restored in livepatch sequence leading to not so obvious fails like below: BUG: Unable to handle kernel data access on write at 0xc0000000000f9078 Faulting instruction address: 0xc0000000018ff958 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP: c0000000018ff958 LR: c0000000018ff930 CTR: c0000000009c0790 REGS: c00000005f2e7790 TRAP: 0300 Tainted: G K (6.14.0+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 2822880b XER: 20040000 CFAR: c0000000008addc0 DAR: c0000000000f9078 DSISR: 0a000000 IRQMASK: 1 GPR00: c0000000018f2584 c00000005f2e7a30 c00000000280a900 c000000017ffa488 GPR04: 0000000000000008 0000000000000000 c0000000018f24fc 000000000000000d GPR08: fffffffffffe0000 000000000000000d 0000000000000000 0000000000008000 GPR12: c0000000009c0790 c000000017ffa480 c00000005f2e7c78 c0000000000f9070 GPR16: c00000005f2e7c90 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 c00000005f3efa80 c00000005f2e7c60 c00000005f2e7c88 GPR24: c00000005f2e7c60 0000000000000001 c0000000000f9078 0000000000000000 GPR28: 00007fff97960000 c000000017ffa480 0000000000000000 c0000000000f9078 ... Call Trace: check_heap_object+0x34/0x390 (unreliable) __mutex_unlock_slowpath.isra.0+0xe4/0x230 seq_read_iter+0x430/0xa90 proc_reg_read_iter+0xa4/0x200 vfs_read+0x41c/0x510 ksys_read+0xa4/0x190 system_call_exception+0x1d0/0x440 system_call_vectored_common+0x15c/0x2ec Fix it by restoring r15 always.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode() With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Abort software beacon handling if disabled A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4851: fix ad4858 chan pointer handling The pointer returned from ad4851_parse_channels_common() is incremented internally as each channel is populated. In ad4858_parse_channels(), the same pointer was further incremented while setting ext_scan_type fields for each channel. This resulted in indio_dev->channels being set to a pointer past the end of the allocated array, potentially causing memory corruption or undefined behavior. Fix this by iterating over the channels using an explicit index instead of incrementing the pointer. This preserves the original base pointer and ensures all channel metadata is set correctly.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mode1 reset crash issue If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal user space to abort the processes. After process abort exit, user queues still use the GPU to access system memory before h/w is reset while KFD cleanup worker free system memory and free VRAM. There is use-after-free race bug that KFD allocate and reuse the freed system memory, and user queue write to the same system memory to corrupt the data structure and cause driver crash. To fix this race, KFD cleanup worker terminate user queues, then flush reset_domain wq to wait for any GPU ongoing reset complete, and then free outstanding BOs.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too Similarly to the previous patch, we need to safe guard hfsc_dequeue() too. But for this one, we don't have a reliable reproducer.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Always pass notifications when child class becomes empty Certain classful qdiscs may invoke their classes' dequeue handler on an enqueue operation. This may unexpectedly empty the child qdisc and thus make an in-flight class passive via qlen_notify(). Most qdiscs do not expect such behaviour at this point in time and may re-activate the class eventually anyways which will lead to a use-after-free. The referenced fix commit attempted to fix this behavior for the HFSC case by moving the backlog accounting around, though this turned out to be incomplete since the parent's parent may run into the issue too. The following reproducer demonstrates this use-after-free: tc qdisc add dev lo root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo parent 1: classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1 tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0 tc qdisc add dev lo parent 2:1 handle 3: netem tc qdisc add dev lo parent 3:1 handle 4: blackhole echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 tc class delete dev lo classid 1:1 echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 Since backlog accounting issues leading to a use-after-frees on stale class pointers is a recurring pattern at this point, this patch takes a different approach. Instead of trying to fix the accounting, the patch ensures that qdisc_tree_reduce_backlog always calls qlen_notify when the child qdisc is empty. This solves the problem because deletion of qdiscs always involves a call to qdisc_reset() and / or qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing the following qdisc_tree_reduce_backlog() to report to the parent. Note that this may call qlen_notify on passive classes multiple times. This is not a problem after the recent patch series that made all the classful qdiscs qlen_notify() handlers idempotent.

In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo() syzbot reports: BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60 Read of size 8 at addr ffff88810de2d2c8 by task a.out/304 CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x670 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? getrusage+0x1109/0x1a60 kasan_report+0xce/0x100 ? getrusage+0x1109/0x1a60 getrusage+0x1109/0x1a60 ? __pfx_getrusage+0x10/0x10 __io_uring_show_fdinfo+0x9fe/0x1790 ? ksys_read+0xf7/0x1c0 ? do_syscall_64+0xa4/0x260 ? vsnprintf+0x591/0x1100 ? __pfx___io_uring_show_fdinfo+0x10/0x10 ? __pfx_vsnprintf+0x10/0x10 ? mutex_trylock+0xcf/0x130 ? __pfx_mutex_trylock+0x10/0x10 ? __pfx_show_fd_locks+0x10/0x10 ? io_uring_show_fdinfo+0x57/0x80 io_uring_show_fdinfo+0x57/0x80 seq_show+0x38c/0x690 seq_read_iter+0x3f7/0x1180 ? inode_set_ctime_current+0x160/0x4b0 seq_read+0x271/0x3e0 ? __pfx_seq_read+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? __mark_inode_dirty+0x402/0x810 ? selinux_file_permission+0x368/0x500 ? file_update_time+0x10f/0x160 vfs_read+0x177/0xa40 ? __pfx___handle_mm_fault+0x10/0x10 ? __pfx_vfs_read+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? fdget_pos+0x24d/0x4b0 ksys_read+0xf7/0x1c0 ? __pfx_ksys_read+0x10/0x10 ? do_user_addr_fault+0x43b/0x9c0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0f74170fc9 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8 RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9 RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004 RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90 R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 298: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x6e/0x70 kmem_cache_alloc_node_noprof+0xe8/0x330 copy_process+0x376/0x5e00 create_io_thread+0xab/0xf0 io_sq_offload_create+0x9ed/0xf20 io_uring_setup+0x12b0/0x1cc0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 22: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kmem_cache_free+0xc4/0x360 rcu_core+0x5ff/0x19f0 handle_softirqs+0x18c/0x530 run_ksoftirqd+0x20/0x30 smpboot_thread_fn+0x287/0x6c0 kthread+0x30d/0x630 ret_from_fork+0xef/0x1a0 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x33/0x60 kasan_record_aux_stack+0x8c/0xa0 __call_rcu_common.constprop.0+0x68/0x940 __schedule+0xff2/0x2930 __cond_resched+0x4c/0x80 mutex_lock+0x5c/0xe0 io_uring_del_tctx_node+0xe1/0x2b0 io_uring_clean_tctx+0xb7/0x160 io_uring_cancel_generic+0x34e/0x760 do_exit+0x240/0x2350 do_group_exit+0xab/0x220 __x64_sys_exit_group+0x39/0x40 x64_sys_call+0x1243/0x1840 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff88810de2cb00 which belongs to the cache task_struct of size 3712 The buggy address is located 1992 bytes inside of freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980) which is caused by the task_struct pointed to by sq->thread being released while it is being used in the function __io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre relase or exit of sq->thread. Fix this by assigning and looking up ->thread under RCU, and grabbing a reference to the task_struct. This e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check return result of sb_min_blocksize Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug. Syzkaller forks multiple processes which after mounting the Squashfs filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000). Now if this ioctl occurs at the same time another process is in the process of mounting a Squashfs filesystem on /dev/loop0, the failure occurs. When this happens the following code in squashfs_fill_super() fails. ---- msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE); msblk->devblksize_log2 = ffz(~msblk->devblksize); ---- sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0. As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2 is set to 64. This subsequently causes the UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36 shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long') This commit adds a check for a 0 return by sb_min_blocksize().

In the Linux kernel, the following vulnerability has been resolved: net: atm: add lec_mutex syzbot found its way in net/atm/lec.c, and found an error path in lecd_attach() could leave a dangling pointer in dev_lec[]. Add a mutex to protect dev_lecp[] uses from lecd_attach(), lec_vcc_attach() and lec_mcast_attach(). Following patch will use this mutex for /proc/net/atm/lec. BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline] BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142 CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xcd/0x680 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 lecd_attach net/atm/lec.c:751 [inline] lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4328 [inline] __kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015 alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711 lecd_attach net/atm/lec.c:737 [inline] lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x2b4/0x4d0 mm/slub.c:4842 free_netdev+0x6c5/0x910 net/core/dev.c:11892 lecd_attach net/atm/lec.c:744 [inline] lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix UAF when reloading module hda_generic_machine_select() appends -idisp to the tplg filename by allocating a new string with devm_kasprintf(), then stores the string right back into the global variable snd_soc_acpi_intel_hda_machines. When the module is unloaded, this memory is freed, resulting in a global variable pointing to freed memory. Reloading the module then triggers a use-after-free: BUG: KFENCE: use-after-free read in string+0x48/0xe0 Use-after-free read at 0x00000000967e0109 (in kfence-#99): string+0x48/0xe0 vsnprintf+0x329/0x6e0 devm_kvasprintf+0x54/0xb0 devm_kasprintf+0x58/0x80 hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic] sof_probe_work+0x7f/0x600 [snd_sof] process_one_work+0x17b/0x330 worker_thread+0x2ce/0x3f0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 kfence-#99: 0x00000000198a940f-0x00000000ace47d9d, size=64, cache=kmalloc-64 allocated by task 333 on cpu 8 at 17.798069s (130.453553s ago): devm_kmalloc+0x52/0x120 devm_kvasprintf+0x66/0xb0 devm_kasprintf+0x58/0x80 hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic] sof_probe_work+0x7f/0x600 [snd_sof] process_one_work+0x17b/0x330 worker_thread+0x2ce/0x3f0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 freed by task 1543 on cpu 4 at 141.586686s (6.665010s ago): release_nodes+0x43/0xb0 devres_release_all+0x90/0xf0 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1c1/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x42/0xb0 __do_sys_delete_module+0x1d1/0x310 do_syscall_64+0x82/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it by copying the match array with devm_kmemdup_array() before we modify it.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __smb2_lease_break_noti() Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is referenced when ksmbd server thread terminates, It will not be freed, but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed asynchronously when the connection is disconnected. __smb2_lease_break_noti calls ksmbd_conn_write, which can cause use-after-free when conn->ksmbd_transport is already freed.

In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix use-after-free in page_pool_recycle_in_ring syzbot reported a uaf in page_pool_recycle_in_ring: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943 CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline] _raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline] page_pool_recycle_in_ring net/core/page_pool.c:707 [inline] page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826 page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline] page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline] napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036 skb_pp_recycle net/core/skbuff.c:1047 [inline] skb_free_head net/core/skbuff.c:1094 [inline] skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb net/core/skbuff.c:1204 [inline] sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242 kfree_skb_reason include/linux/skbuff.h:1263 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3343 [inline] root cause is: page_pool_recycle_in_ring ptr_ring_produce spin_lock(&r->producer_lock); WRITE_ONCE(r->queue[r->producer++], ptr) //recycle last page to pool page_pool_release page_pool_scrub page_pool_empty_ring ptr_ring_consume page_pool_return_page //release all page __page_pool_destroy free_percpu(pool->recycle_stats); free(pool) //free spin_unlock(&r->producer_lock); //pool->ring uaf read recycle_stat_inc(pool, ring); page_pool can be free while page pool recycle the last page in ring. Add producer-lock barrier to page_pool_release to prevent the page pool from being free before all pages have been recycled. recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not enabled, which will trigger Wempty-body build warning. Add definition for pool stat macro to fix warning.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcf/0x610 mm/kasan/report.c:489 kasan_report+0xb5/0xe0 mm/kasan/report.c:602 rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195 rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132 __rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232 rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109 create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052 ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095 ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679 vfs_write fs/read_write.c:677 [inline] vfs_write+0x26a/0xcc0 fs/read_write.c:659 ksys_write+0x1b8/0x200 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f In the function rxe_create_cq, when rxe_cq_from_init fails, the function rxe_cleanup will be called to handle the allocated resources. In fact, some memory resources have already been freed in the function rxe_cq_from_init. Thus, this problem will occur. The solution is to let rxe_cleanup do all the work.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmf: Use device managed allocations If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 strlen+0x93/0xa0 lib/string.c:420 __fortify_strlen include/linux/fortify-string.h:268 [inline] get_kobj_path_length lib/kobject.c:118 [inline] kobject_get_path+0x3f/0x2a0 lib/kobject.c:158 kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545 ib_register_device drivers/infiniband/core/device.c:1472 [inline] ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393 rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552 rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225 nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796 rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmsg+0x16d/0x220 net/socket.c:2652 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This problem is similar to the problem that the commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name") fixes. The root cause is: the function ib_device_rename() renames the name with lock. But in the function kobject_uevent(), this name is accessed without lock protection at the same time. The solution is to add the lock protection when this name is accessed in the function kobject_uevent().

In the Linux kernel, the following vulnerability has been resolved: ipmi:msghandler: Fix potential memory corruption in ipmi_create_user() The "intf" list iterator is an invalid pointer if the correct "intf->intf_num" is not found. Calling atomic_dec(&intf->nr_users) on and invalid pointer will lead to memory corruption. We don't really need to call atomic_dec() if we haven't called atomic_add_return() so update the if (intf->in_shutdown) path as well.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check dce_hwseq before dereferencing it [WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad)

In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid __bpf_prog_ret0_warn when jit fails syzkaller reported an issue: WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Modules linked in: CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39 RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357 Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105 ... When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable. This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog, but jit failed due to FAULT_INJECTION. As a result, incorrectly treats the program as valid, when the program runs it calls `__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).

In the Linux kernel, the following vulnerability has been resolved: mtd: inftlcore: Add error check for inftl_read_oob() In INFTL_findwriteunit(), the return value of inftl_read_oob() need to be checked. A proper implementation can be found in INFTL_deleteblock(). The status will be set as SECTOR_IGNORE to break from the while-loop correctly if the inftl_read_oob() fails.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix double-free bug The storage for the TLV PC register data wasn't done like all the other storage in the drv->fw area, which is cleared at the end of deallocation. Therefore, the freeing must also be done differently, explicitly NULL'ing it out after the free, since otherwise there's a nasty double-free bug here if a file fails to load after this has been parsed, and we get another free later (e.g. because no other file exists.) Fix that by adding the missing NULL assignment.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent out-of-bounds stream writes by validating *pos ksmbd_vfs_stream_write() did not validate whether the write offset (*pos) was within the bounds of the existing stream data length (v_len). If *pos was greater than or equal to v_len, this could lead to an out-of-bounds memory write. This patch adds a check to ensure *pos is less than v_len before proceeding. If the condition fails, -EINVAL is returned.

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0

In the Linux kernel, the following vulnerability has been resolved: binder: fix yet another UAF in binder_devices Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices") addressed a use-after-free where devices could be released without first being removed from the binder_devices list. However, there is a similar path in binder_free_proc() that was missed: ================================================================== BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100 Write of size 8 at addr ffff0000c773b900 by task umount/467 CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_remove_device+0xd4/0x100 binderfs_evict_inode+0x230/0x2f0 evict+0x25c/0x5dc iput+0x304/0x480 dentry_unlink_inode+0x208/0x46c __dentry_kill+0x154/0x530 [...] Allocated by task 463: __kmalloc_cache_noprof+0x13c/0x324 binderfs_binder_device_create.isra.0+0x138/0xa60 binder_ctl_ioctl+0x1ac/0x230 [...] Freed by task 215: kfree+0x184/0x31c binder_proc_dec_tmpref+0x33c/0x4ac binder_deferred_func+0xc10/0x1108 process_one_work+0x520/0xba4 [...] ================================================================== Call binder_remove_device() within binder_free_proc() to ensure the device is removed from the binder_devices list before being kfreed.

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix potential out-of-bound write If the caller wrote more characters, count is truncated to the max available space in "simple_write_to_buffer". Check that the input size does not exceed the buffer size. Write a zero termination afterwards.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops Fix a kernel oops found while testing the stm32_pcie Endpoint driver with handling of PERST# deassertion: During EP initialization, pci_epf_test_alloc_space() allocates all BARs, which are further freed if epc_set_bar() fails (for instance, due to no free inbound window). However, when pci_epc_set_bar() fails, the error path: pci_epc_set_bar() -> pci_epf_free_space() does not clear the previous assignment to epf_test->reg[bar]. Then, if the host reboots, the PERST# deassertion restarts the BAR allocation sequence with the same allocation failure (no free inbound window), creating a double free situation since epf_test->reg[bar] was deallocated and is still non-NULL. Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space() invocations are symmetric, and as such, set epf_test->reg[bar] to NULL when memory is freed. [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix a buf size overflow issue during udmabuf creation by casting size_limit_mb to u64 when calculate pglimit.

In the Linux kernel, the following vulnerability has been resolved: codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() After making all ->qlen_notify() callbacks idempotent, now it is safe to remove the check of qlen!=0 from both fq_codel_dequeue() and codel_qdisc_dequeue().

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk Smatch detected a potential use-after-free of an ndlp oject in dev_loss_tmo_callbk during driver unload or fatal error handling. Fix by reordering code to avoid potential use-after-free if initial nodelist reference has been previously removed.