In the Linux kernel, the following vulnerability has been resolved: vfio/pci: fix memory leak during D3hot to D0 transition If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does not have No_Soft_Reset bit set in its PMCSR config register), then the current PCI state will be saved locally in 'vfio_pci_core_device::pm_save' during D0->D3hot transition and same will be restored back during D3hot->D0 transition. For saving the PCI state locally, pci_store_saved_state() is being used and the pci_load_and_free_saved_state() will free the allocated memory. But for reset related IOCTLs, vfio driver calls PCI reset-related API's which will internally change the PCI power state back to D0. So, when the guest resumes, then it will get the current state as D0 and it will skip the call to vfio_pci_set_power_state() for changing the power state to D0 explicitly. In this case, the memory pointed by 'pm_save' will never be freed. In a malicious sequence, the state changing to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be run in a loop and it can cause an OOM situation. This patch frees the earlier allocated memory first before overwriting 'pm_save' to prevent the mentioned memory leak.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping() After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion.

In the Linux kernel, the following vulnerability has been resolved: net/9p: Fix a potential socket leak in p9_socket_open Both p9_fd_create_tcp() and p9_fd_create_unix() will call p9_socket_open(). If the creation of p9_trans_fd fails, p9_fd_create_tcp() and p9_fd_create_unix() will return an error directly instead of releasing the cscoket, which will result in a socket leak. This patch adds sock_release() to fix the leak issue.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix misused goto label Fix a misused goto label jump since that can result in a memory leak.

In the Linux kernel, the following vulnerability has been resolved: x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails In mce_threshold_create_device(), if threshold_create_bank() fails, the previously allocated threshold banks array @bp will be leaked because the call to mce_threshold_remove_device() will not free it. This happens because mce_threshold_remove_device() fetches the pointer through the threshold_banks per-CPU variable but bp is written there only after the bank creation is successful, and not before, when threshold_create_bank() fails. Add a helper which unwinds all the bank creation work previously done and pass into it the previously allocated threshold banks array for freeing. [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_scan_medium If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] -------------------------------------------- Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis)

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put().

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix handling of dummy receive descriptors Fix memory leak caused by not handling dummy receive descriptor properly. iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive descriptors. Without this patch, when the hardware writes a dummy descriptor, iavf would not free the page allocated for the previous receive buffer. This is an unlikely event but can still happen. [Jesse: massaged commit message]

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memory leak of uid in files registration When there are no files for __io_sqe_files_scm() to process in the range, it'll free everything and return. However, it forgets to put uid.

In the Linux kernel, the following vulnerability has been resolved: MIPS: pgalloc: fix memory leak caused by pgd_free() pgd page is freed by generic implementation pgd_free() since commit f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"), however, there are scenarios that the system uses more than one page as the pgd table, in such cases the generic implementation pgd_free() won't be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER" will be set as "1", which will cause allocating two pages as the pgd table. Well, at the same time, the generic implementation pgd_free() just free one pgd page, which will result in the memory leak. The memory leak can be easily detected by executing shell command: "while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"

In the Linux kernel, the following vulnerability has been resolved: thermal/core: Fix memory leak in __thermal_cooling_device_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888010080000 (size 264312): comm "182", pid 102533, jiffies 4296434960 (age 10.100s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 40 7f 1f b9 ff ff ff ff ........@....... backtrace: [<0000000038b2f4fc>] kmalloc_order_trace+0x1d/0x110 mm/slab_common.c:969 [<00000000ebcb8da5>] __kmalloc+0x373/0x420 include/linux/slab.h:510 [<0000000084137f13>] thermal_cooling_device_setup_sysfs+0x15d/0x2d0 include/linux/slab.h:586 [<00000000352b8755>] __thermal_cooling_device_register+0x332/0xa60 drivers/thermal/thermal_core.c:927 [<00000000fb9f331b>] devm_thermal_of_cooling_device_register+0x6b/0xf0 drivers/thermal/thermal_core.c:1041 [<000000009b8012d2>] max6650_probe.cold+0x557/0x6aa drivers/hwmon/max6650.c:211 [<00000000da0b7e04>] i2c_device_probe+0x472/0xac0 drivers/i2c/i2c-core-base.c:561 If device_register() fails, thermal_cooling_device_destroy_sysfs() need be called to free the memory allocated in thermal_cooling_device_setup_sysfs().

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_mux_init() When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux is not released.

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Protect memory leak for NPIV ports sending PLOGI_RJT There is a potential memory leak in lpfc_ignore_els_cmpl() and lpfc_els_rsp_reject() that was allocated from NPIV PLOGI_RJT (lpfc_rcv_plogi()'s login_mbox). Check if cmdiocb->context_un.mbox was allocated in lpfc_ignore_els_cmpl(), and then free it back to phba->mbox_mem_pool along with mbox->ctx_buf for service parameters. For lpfc_els_rsp_reject() failure, free both the ctx_buf for service parameters and the login_mbox.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921s: fix a possible memory leak in mt7921_load_patch Always release fw data at the end of mt7921_load_patch routine.

In the Linux kernel, the following vulnerability has been resolved: wireguard: socket: free skb in send6 when ipv6 is disabled I got a memory leak report: unreferenced object 0xffff8881191fc040 (size 232): comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0 [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340 [<ffffffff832974fb>] __alloc_skb+0x1db/0x200 [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0 [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110 [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30 [<ffffffff8119c558>] process_one_work+0x2e8/0x770 [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0 [<ffffffff811a88e0>] kthread+0x120/0x160 [<ffffffff8100242f>] ret_from_fork+0x1f/0x30 In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_ buffer_to_peer(), the semantics of send6() is required to free skb. But when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it to fix this bug.

In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Do proper cleanup if IFCVF init fails ifcvf_mgmt_dev leaks memory if it is not freed before returning. Call is made to correct return statement so memory does not leak. ifcvf_init_hw does not take care of this so it is needed to do it here.

In the Linux kernel, the following vulnerability has been resolved: ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: fix memory leak in int3400_notify() It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix memory leaks Fix memory leaks related to operational reply queue's memory segments which are not getting freed while unloading the driver.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: provide block_invalidate_folio to fix memory leak The ntfs3 filesystem lacks the 'invalidate_folio' method and it causes memory leak. If you write to the filesystem and then unmount it, the cached written data are not freed and they are permanently leaked.

In the Linux kernel, the following vulnerability has been resolved: drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm_gem_object_lookup will call drm_gem_object_get inside. So cursor_bo needs to be put when msm_gem_get_and_pin_iova fails.

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_mount_fs If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88811b25a640 (size 64): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] unreferenced object 0xffff88812c760000 (size 65536): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffffa493a449>] __kmalloc+0x6b9/0x910 [<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem.

In the Linux kernel, the following vulnerability has been resolved: staging: wfx: fix an error handling in wfx_init_common() One error handler of wfx_init_common() return without calling ieee80211_free_hw(hw), which may result in memory leak. And I add one err label to unify the error handler, which is useful for the subsequent changes.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: men_z188_adc: Fix a resource leak in an error handling path If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: pci: add missing m_can_class_free_dev() in probe/remove methods In m_can_pci_remove() and error handling path of m_can_pci_probe(), m_can_class_free_dev() should be called to free resource allocated by m_can_class_allocate_dev(), otherwise there will be memleak.

In the Linux kernel, the following vulnerability has been resolved: net: mdiobus: fix unbalanced node reference count I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc() returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is greater than osize after sk_msg_alloc(), memleak occurs. To fix we use sk_msg_trim() to release the allocated memory, then goto wait for memory. Other call paths of sk_msg_alloc() have the similar issue, such as tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(), as Cong Wang suggested. This issue can cause the following info: WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 kthread+0xe6/0x110 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: kernel/resource: fix kfree() of bootmem memory again Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix I/O page table memory leak The current logic updates the I/O page table mode for the domain before calling the logic to free memory used for the page table. This results in IOMMU page table memory leak, and can be observed when launching VM w/ pass-through devices. Fix by freeing the memory used for page table before updating the mode.

In the Linux kernel, the following vulnerability has been resolved: watch_queue: Free the page array when watch_queue is dismantled Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the watch_queue is torn down") took care of the bitmap, but not the page array. BUG: memory leak unreferenced object 0xffff88810d9bc140 (size 32): comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s) hex dump (first 32 bytes): 40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmalloc_array include/linux/slab.h:621 [inline] kcalloc include/linux/slab.h:652 [inline] watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251 pipe_ioctl+0x82/0x140 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline]

In the Linux kernel, the following vulnerability has been resolved: tracing/histogram: Fix a potential memory leak for kstrdup() kfree() is missing on an error path to free the memory allocated by kstrdup(): p = param = kstrdup(data->params[i], GFP_KERNEL); So it is better to free it via kfree(p).

In the Linux kernel, the following vulnerability has been resolved: sctp: fix kernel-infoleak for SCTP sockets syzbot reported a kernel infoleak [1] of 4 bytes. After analysis, it turned out r->idiag_expires is not initialized if inet_sctp_diag_fill() calls inet_diag_msg_common_fill() Make sure to clear idiag_timer/idiag_retrans/idiag_expires and let inet_diag_msg_sctpasoc_fill() fill them again if needed. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:154 [inline] _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 copy_to_iter include/linux/uio.h:162 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline] netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x795/0xa10 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3247 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] sock_write_iter+0x594/0x690 net/socket.c:1061 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 2508 are uninitialized Memory access of size 2508 starts at ffff888114f9b000 Data copied to user address 00007f7fe09ff2e0 CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in parse_apply_sb_mount_options() If processing the on-disk mount options fails after any memory was allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is leaked. Fix this by calling ext4_fc_free() instead of kfree() directly. Reproducer: mkfs.ext4 -F /dev/vdc tune2fs /dev/vdc -E mount_opts=usrjquota=file echo clear > /sys/kernel/debug/kmemleak mount /dev/vdc /vdc echo scan > /sys/kernel/debug/kmemleak sleep 5 echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak

In the Linux kernel, the following vulnerability has been resolved: habanalabs: fix possible memory leak in MMU DR fini This patch fixes what seems to be copy paste error. We will have a memory leak if the host-resident shadow is NULL (which will likely happen as the DR and HR are not dependent).

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req() In pm8001_chip_fw_flash_update_build(), if pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex allocated must be freed.

In the Linux kernel, the following vulnerability has been resolved: block: release rq qos structures for queue without disk blkcg_init_queue() may add rq qos structures to request queue, previously blk_cleanup_queue() calls rq_qos_exit() to release them, but commit 8e141f9eb803 ("block: drain file system I/O on del_gendisk") moves rq_qos_exit() into del_gendisk(), so memory leak is caused because queues may not have disk, such as un-present scsi luns, nvme admin queue, ... Fixes the issue by adding rq_qos_exit() to blk_cleanup_queue() back. BTW, v5.18 won't need this patch any more since we move blkcg_init_queue()/blkcg_exit_queue() into disk allocation/release handler, and patches have been in for-5.18/block.

In the Linux kernel, the following vulnerability has been resolved: gianfar: ethtool: Fix refcount leak in gfar_get_ts_info The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount.

kde-workspace before 4.10.5 has a memory leak in plasma desktop

An issue was discovered in ksmbd in the Linux kernel 5.15 through 5.19 before 5.19.2. fs/ksmbd/smb2pdu.c omits a kfree call in certain smb2_handle_negotiate error conditions, aka a memory leak.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get() We should call of_node_put() for the reference returned by of_parse_phandle() in fail path or when it is not used anymore. Here we only need to move the of_node_put() before the check.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain() It seems to me that percpu memory for chain stats started leaking since commit 3bc158f8d0330f0a ("netfilter: nf_tables: map basechain priority to hardware priority") when nft_chain_offload_priority() returned an error.

In the Linux kernel, the following vulnerability has been resolved: md: Don't ignore read-only array in md_check_recovery() Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem. After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh: 1) array is read-only. dm-raid update super block: rs_update_sbs ro = mddev->ro mddev->ro = 0 -> set array read-write md_update_sb 2) register new sync thread concurrently. 3) dm-raid set array back to read-only: rs_update_sbs mddev->ro = ro 4) stop the array: raid_dtr md_stop stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) 5) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); 6) daemon thread can't unregister sync thread: md_check_recovery if (!md_is_rdwr(mddev) && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang; The root cause is that dm-raid manipulate 'mddev->ro' by itself, however, dm-raid really should stop sync thread before setting the array read-only. Unfortunately, I need to read more code before I can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix the problem the easy way for now to prevent dm-raid regression.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix some memleaks in gssx_dec_option_array The creds and oa->data need to be freed in the error-handling paths after their allocation. So this patch add these deallocations in the corresponding paths.

Multiple memory leaks in freshclam/manager.c in ClamAV before 0.94 might allow attackers to cause a denial of service (memory consumption) via unspecified vectors related to "error handling logic".

In the Linux kernel, the following vulnerability has been resolved: devlink: fix possible use-after-free and memory leaks in devlink_init() The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Make an unregister in case of unsuccessful registration.

In the Linux kernel, the following vulnerability has been resolved: md: fix kmemleak of rdev->serial If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be alloc not be freed, and kmemleak occurs. unreferenced object 0xffff88815a350000 (size 49152): comm "mdadm", pid 789, jiffies 4294716910 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc f773277a): [<0000000058b0a453>] kmemleak_alloc+0x61/0xe0 [<00000000366adf14>] __kmalloc_large_node+0x15e/0x270 [<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f [<00000000f206d60a>] kvmalloc_node+0x74/0x150 [<0000000034bf3363>] rdev_init_serial+0x67/0x170 [<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220 [<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630 [<0000000073c28560>] md_add_new_disk+0x400/0x9f0 [<00000000770e30ff>] md_ioctl+0x15bf/0x1c10 [<000000006cfab718>] blkdev_ioctl+0x191/0x3f0 [<0000000085086a11>] vfs_ioctl+0x22/0x60 [<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0 [<00000000e54e675e>] do_syscall_64+0x71/0x150 [<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix several DMA buffer leaks Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects. Several of these buffers are never dealloced. Some of them can be deallocated right after GSP-RM is initialized, but the rest need to stay until the driver unloads. Also futher bullet-proof these objects by poisoning the buffer and clearing the nvkm_gsp_mem object when it is deallocated. Poisoning the buffer should trigger an error (or crash) from GSP-RM if it tries to access the buffer after we've deallocated it, because we were wrong about when it is safe to deallocate. Finally, change the mem->size field to a size_t because that's the same type that dma_alloc_coherent expects.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix memory leak This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone the skb and also make sure btmtk_process_coredump frees the skb passed following the same logic.

Exim supports the use of multiple "-p" command line arguments which are malloc()'ed and never free()'ed, used in conjunction with other issues allows attackers to cause arbitrary code execution. This affects exim version 4.89 and earlier. Please note that at this time upstream has released a patch (commit 65e061b76867a9ea7aeeb535341b790b90ae6c21), but it is not known if a new point release is available that addresses this issue at this time.