Sysinternals PsExec Elevation of Privilege Vulnerability

A Privilege Context Switching issue was discovered in join.c in Firejail 0.9.68. By crafting a bogus Firejail container that is accepted by the Firejail setuid-root program as a join target, a local attacker can enter an environment in which the Linux user namespace is still the initial user namespace, the NO_NEW_PRIVS prctl is not activated, and the entered mount namespace is under the attacker's control. In this way, the filesystem layout can be adjusted to gain root privileges through execution of available setuid-root binaries such as su or sudo.

Windows Print Spooler Elevation of Privilege Vulnerability

Windows CSC Service Elevation of Privilege Vulnerability

Windows CSC Service Elevation of Privilege Vulnerability

Active Template Library Elevation of Privilege Vulnerability

Local privilege escalation due to excessive permissions assigned to child processes. The following products are affected: Acronis Snap Deploy (Windows) before build 3640

Privilege Escalation vulnerability during daily DAT updates when using McAfee Virus Scan Enterprise (VSE) prior to 8.8 Patch 15 allows local users to cause the deletion and creation of files they would not normally have permission to through altering the target of symbolic links. This is timing dependent.

Windows Event Logging Service Elevation of Privilege Vulnerability

Windows Event Tracing Elevation of Privilege Vulnerability

Windows Multipoint Management Elevation of Privilege Vulnerability

Diagnostics Hub Standard Collector Elevation of Privilege Vulnerability

Windows WalletService Elevation of Privilege Vulnerability

Windows WLAN Service Elevation of Privilege Vulnerability

Windows CSC Service Elevation of Privilege Vulnerability

Windows WalletService Elevation of Privilege Vulnerability

Windows AppX Deployment Extensions Elevation of Privilege Vulnerability

Windows Print Spooler Elevation of Privilege Vulnerability

Windows Fax Compose Form Remote Code Execution Vulnerability

Windows Update Stack Setup Elevation of Privilege Vulnerability

Windows CSC Service Elevation of Privilege Vulnerability

Windows Hyper-V Elevation of Privilege Vulnerability

Windows CSC Service Elevation of Privilege Vulnerability

Windows Kernel Elevation of Privilege Vulnerability

In Telerik Test Studio versions prior to v2023.3.1330, a privilege elevation vulnerability has been identified in the applications installer component.  In an environment where an existing Telerik Test Studio install is present, a lower privileged user has the ability to manipulate the installation package to elevate their privileges on the underlying operating system.

A local privilege escalation vulnerability in ethtraceroute of Juniper Networks Junos OS may allow a locally authenticated user with shell access to escalate privileges and write to the local filesystem as root. ethtraceroute is shipped with setuid permissions enabled and is owned by the root user, allowing local users to run ethtraceroute with root privileges. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D240; 17.3 versions prior to 17.3R3-S11, 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1.

A sensitive information disclosure vulnerability in delta-export configuration utility (dexp) of Juniper Networks Junos OS may allow a locally authenticated shell user the ability to create and read database files generated by the dexp utility, including password hashes of local users. Since dexp is shipped with setuid permissions enabled and is owned by the root user, this vulnerability may allow a local privileged user the ability to run dexp with root privileges and access sensitive information in the dexp database. This issue affects Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.2X75 versions prior to 18.2X75-D34; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R1-S4, 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.

An exposed dangerous function vulnerability in the Trend Micro Apex One agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

An issue in mRemoteNG v1.76.20 allows attackers to escalate privileges via a crafted executable file. NOTE: third parties were unable to reproduce any scenario in which the claimed access of BUILTIN\Users:(M) is present.

In getContentProviderImpl of ActivityManagerService.java, there is a possible permission bypass due to non-restored binder identities. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-9 Android-10 Android-11 Android-8.1Android ID: A-172935267

Failure to validate privileges during installation of AMD Ryzen™ Master may allow an attacker with low privileges to modify files potentially leading to privilege escalation and code execution by the lower privileged user.

Geist WatchDog Console 3.2.2 uses a weak ACL for the C:\ProgramData\WatchDog Console directory, which allows local users to modify configuration data by updating (1) config.xml or (2) servers.xml.

A privilege escalation vulnerability was reported in LenovoBatteryGaugePackage for Lenovo System Interface Foundation bundled in Lenovo Vantage prior to version 10.2003.10.0 that could allow an authenticated user to execute code with elevated privileges.

HP Print and Scan Doctor for Windows may potentially be vulnerable to escalation of privilege. HP is releasing software updates to mitigate the potential vulnerability.

Windows Installer Elevation of Privilege Vulnerability

In multiple locations, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Weak Registry permissions in ABB System 800xA Base allow low privileged users to read and modify registry settings related to control system functionality, allowing an authenticated attacker to cause system functions to stop or malfunction.

FusionCompute versions 6.3.0, 6.3.1, 6.5.0, 6.5.1 and 8.0.0 have a privilege escalation vulnerability. Due to improper privilege management, an attacker with common privilege may access some specific files and get the administrator privilege in the affected products. Successful exploit will cause privilege escalation.

An improper privilege management vulnerability [CWE-269] in Fortinet FortiSOAR before 7.2.1 allows a GUI user who has already found a way to modify system files (via another, unrelated and hypothetical exploit) to execute arbitrary Python commands as root.

Vulnerabilities in the Mint WorkBench allow a low privileged attacker to create and write to a file anywhere on the file system as SYSTEM with arbitrary content as long as the file does not already exist. The Mint WorkBench installer file allows a low-privileged user to run a "repair" operation on the product

Privilege Escalation vulnerability in McAfee Active Response (MAR) for Mac prior to 2.4.3 Hotfix 1 allows a malicious script or program to perform functions that the local executing user has not been granted access to.

A privilege escalation vulnerability was identified in the CLI command of Zyxel USG FLEX 100(W) firmware versions 4.50 through 5.30, USG FLEX 200 firmware versions 4.50 through 5.30, USG FLEX 500 firmware versions 4.50 through 5.30, USG FLEX 700 firmware versions 4.50 through 5.30, USG FLEX 50(W) firmware versions 4.16 through 5.30, USG20(W)-VPN firmware versions 4.16 through 5.30, ATP series firmware versions 4.32 through 5.30, VPN series firmware versions 4.30 through 5.30, USG/ZyWALL series firmware versions 4.09 through 4.72, which could allow a local attacker to execute some OS commands with root privileges in some directories on a vulnerable device.

Privilege Escalation vulnerability in the command line interface in McAfee Advanced Threat Defense (ATD) 4.x prior to 4.8.2 allows local users to execute arbitrary code via improper access controls on the sudo command.

Honeywell INNCOM INNControl 3 allows workstation users to escalate application user privileges through the modification of local configuration files.

An improper access control vulnerability in Trend Micro Deep Security 20.0 and Trend Micro Cloud One - Endpoint and Workload Security Agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

Symantec Endpoint Protection, prior to 14.3 RU6 (14.3.9210.6000), may be susceptible to a Elevation of Privilege vulnerability, which is a type of issue whereby an attacker may attempt to compromise the software application to gain elevated

Privilege Escalation vulnerability in McAfee Active Response (MAR) for Linux prior to 2.4.3 Hotfix 1 allows a malicious script or program to perform functions that the local executing user has not been granted access to.

Pritunl Client through 1.2.3019.52 on Windows allows local privilege escalation, related to an ACL entry for CREATOR OWNER in platform_windows.go.

Privilege Escalation vulnerability in McAfee MVISION Endpoint prior to 20.5.0.94 allows a malicious script or program to perform functions that the local executing user has not been granted access to.