PDF-XChange Editor TIF File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of TIF files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-19638.

Microsoft Word Remote Code Execution Vulnerability

Use after free vulnerability exists in CX-Programmer Included in CX-One CXONE-AL[][]D-V4 V9.80 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur.

Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the GUI's interactive VCD parsing code.

Adobe Acrobat Reader versions 23.003.20244 (and earlier) and 20.005.30467 (and earlier) are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Adobe Acrobat Reader versions 23.003.20244 (and earlier) and 20.005.30467 (and earlier) are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Adobe Acrobat Reader versions 23.003.20244 (and earlier) and 20.005.30467 (and earlier) are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the GUI's legacy VCD parsing code.

Adobe Acrobat Reader versions 23.003.20244 (and earlier) and 20.005.30467 (and earlier) are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the GUI's recoder (default) VCD parsing code.

Adobe Dimension version 3.4.9 is affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Microsoft Excel Remote Code Execution Vulnerability

Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the vcd2lxt2 conversion utility.

Adobe Acrobat Reader versions 23.003.20244 (and earlier) and 20.005.30467 (and earlier) are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the vcd2lxt conversion utility.

Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the vcd2vzt conversion utility.

A vulnerability has been identified in JT2Go (All versions < V14.3.0.1), Teamcenter Visualization V13.3 (All versions < V13.3.0.12), Teamcenter Visualization V14.0 (All versions), Teamcenter Visualization V14.1 (All versions < V14.1.0.11), Teamcenter Visualization V14.2 (All versions < V14.2.0.6), Teamcenter Visualization V14.3 (All versions < V14.3.0.1), Tecnomatix Plant Simulation V2201 (All versions < V2201.0010), Tecnomatix Plant Simulation V2302 (All versions < V2302.0004). The affected application contains a use-after-free vulnerability that could be triggered while parsing specially crafted WRL files. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-20842)

A use-after-free issue was addressed with improved memory management. This issue is fixed in macOS Monterey 12.6.8, iOS 15.7.8 and iPadOS 15.7.8, iOS 16.6 and iPadOS 16.6, tvOS 16.6, macOS Big Sur 11.7.9, macOS Ventura 13.5, watchOS 9.6. An app may be able to execute arbitrary code with kernel privileges.

3D Viewer Remote Code Execution Vulnerability

Microsoft Excel Remote Code Execution Vulnerability

Microsoft Outlook Remote Code Execution Vulnerability

An exploitable use-after-free vulnerability exists in the Length parsing function of NitroPDF. A specially crafted PDF can cause a type confusion, resulting in a use-after-free condition. An attacker can craft a malicious PDF to trigger this vulnerability.

Windows OLE Remote Code Execution Vulnerability

A vulnerability has been identified in JT2Go (All versions < V14.2.0.5), Solid Edge SE2022 (All versions < V222.0 Update 13), Solid Edge SE2023 (All versions < V223.0 Update 4), Teamcenter Visualization V13.2 (All versions < V13.2.0.15), Teamcenter Visualization V13.3 (All versions < V13.3.0.11), Teamcenter Visualization V14.1 (All versions < V14.1.0.11), Teamcenter Visualization V14.2 (All versions < V14.2.0.5). The affected application contains a use-after-free vulnerability that could be triggered while parsing specially crafted ASM file. An attacker could leverage this vulnerability to execute code in the context of the current process.

A flaw was found in ImageMagick where it did not properly sanitize certain input before using it to invoke convert processes. This flaw allows an attacker to create a specially crafted image that leads to a use-after-free vulnerability when processed by ImageMagick. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

Use after free vulnerability in Panasonic KW Watcher versions 1.00 through 2.82 may allow attackers to execute arbitrary code.

A use-after-free vulnerability exists in the Figure stream parsing functionality of Ichitaro 2023 1.0.1.59372. A specially crafted document can cause memory corruption, resulting in arbitrary code execution. Victim would need to open a malicious file to trigger this vulnerability.

xlsxio v0.1.2 to v0.2.34 was discovered to contain a free of uninitialized pointer in the xlsxioread_sheetlist_close() function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted XLSX file.

Windows Online Certificate Status Protocol (OCSP) SnapIn Remote Code Execution Vulnerability

A vulnerability has been identified in Solid Edge SE2021 (All Versions < SE2021MP7). The PSKERNEL.dll library in affected application lacks proper validation while parsing user-supplied OBJ files that could lead to a use-after-free condition. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-13777)

GCC c++filt v2.26 was discovered to contain a use-after-free vulnerability via the component cplus-dem.c.

Microsoft Office Remote Code Execution Vulnerability

Microsoft Office Graphics Remote Code Execution Vulnerability

Substance3D - Stager versions 3.1.1 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

A use-after-free issue was addressed with improved memory management. This issue is fixed in macOS Ventura 13.3, macOS Big Sur 11.7.5, macOS Monterey 12.6.4. An app may be able to execute arbitrary code with kernel privileges.

A use-after-free issue was addressed with improved memory management. This issue is fixed in macOS Monterey 12.6.8, iOS 15.7.8 and iPadOS 15.7.8, iOS 16.6 and iPadOS 16.6, tvOS 16.6, macOS Big Sur 11.7.9, macOS Ventura 13.5, watchOS 9.6. An app may be able to execute arbitrary code with kernel privileges.

InDesign Desktop versions ID20.2, ID19.5.3 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

A use after free vulnerability in FATEK Automation WinProladder versions 3.30 and prior may be exploited when a valid user opens a malformed project file, which may allow arbitrary code execution.

A use-after-free issue was addressed with improved memory management. This issue is fixed in macOS Monterey 12.6.8, iOS 16.6 and iPadOS 16.6, tvOS 16.6, macOS Big Sur 11.7.9, macOS Ventura 13.5, watchOS 9.6. An app may be able to execute arbitrary code with kernel privileges.

A use-after-free issue was addressed with improved memory management. This issue is fixed in watchOS 9.5, tvOS 16.5, macOS Ventura 13.4, iOS 15.7.6 and iPadOS 15.7.6, macOS Big Sur 11.7.7, macOS Monterey 12.6.6, iOS 16.5 and iPadOS 16.5. An app may be able to execute arbitrary code with kernel privileges.

Microsoft Office Visio Remote Code Execution Vulnerability

Acrobat Reader versions 24.001.30235, 20.005.30763, 25.001.20521 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Windows Media Remote Code Execution Vulnerability

Microsoft ODBC Driver for SQL Server Remote Code Execution Vulnerability

Substance3D - Stager versions 3.1.1 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

A use-after-free vulnerability exists in the footerr functionality of Hancom Office 2020 HWord 11.0.0.7520. A specially crafted .doc file can lead to a use-after-free. An attacker can trick a user into opening a malformed file to trigger this vulnerability.

The affected application lacks proper validation of user-supplied data when parsing project files (e.g., CSP). This could lead to a use-after-free vulnerability. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process.

PDF-XChange Editor TIF File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of TIF files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-19108.

A Use-After-Free vulnerability in SLDPRT file reading procedure exists in SOLIDWORKS Desktop from Release SOLIDWORKS 2021 through Release SOLIDWORKS 2023. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted SLDPRT file.

Use-After-Free, Out-of-bounds Write and Heap-based Buffer Overflow vulnerabilities exist in the DWG and DXF file reading procedure in SOLIDWORKS Desktop from Release SOLIDWORKS 2021 through Release SOLIDWORKS 2023. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted DWG or DXF file.