An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) (Exynos chipsets) software. The baseband component has a buffer overflow via an abnormal SETUP message, leading to execution of arbitrary code. The Samsung ID is SVE-2020-18098 (September 2020).
An out-of-bounds write vulnerability exists in the CSR format title functionality of Open Babel 3.1.1 and master commit 530dbfa3. A specially crafted malformed file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.
A potential security vulnerability has been identified in certain HP PC products using AMI BIOS, which might allow arbitrary code execution. AMI has released firmware updates to mitigate this vulnerability.
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, CBK40 before 2.5.0.10, CBR40 before 2.5.0.10, D7800 before 1.0.1.58, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6330 before 1.1.0.76, R6350 before 1.1.0.76, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700 before 1.0.2.16, R6700v2 before 1.2.0.72, R6700v3 before 1.0.4.98, R6800 before 1.2.0.72, R6850 before 1.1.0.76, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R6900v2 before 1.2.0.72, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, R7800 before 1.0.2.74, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RS400 before 1.5.0.48, XR300 before 1.0.3.50, XR450 before 2.3.2.66, XR500 before 2.3.2.66, and XR700 before 1.0.1.34.
NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.
A security flaw has been discovered in D-Link DIR-825 up to 2.10. Affected by this vulnerability is the function sub_4106d4 of the file apply.cgi. The manipulation of the argument countdown_time results in buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be exploited. This vulnerability only affects products that are no longer supported by the maintainer.
Buffer overflow vulnerability in function jsvGetStringChars in Espruino before RELEASE_2V09, allows remote attackers to execute arbitrary code.
AutomationDirect C-more EA9 HMI contains a function with bounds checks that can be skipped, which could result in an attacker abusing the function to cause a denial-of-service condition or achieving remote code execution on the affected device.
IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the rules parameter in the formIPMacBindAdd function.
Buffer overflow vulnerability in function NumberToPrecisionCmd in jsish before 3.0.7, allows remote attackers to execute arbitrary code.
Buffer overflow vulnerability in Renleilei1992 Linux_Network_Project 1.0, allows attackers to execute arbitrary code, via the password field.
A vulnerability was found in D-Link DIR-825 1.08.01. This impacts the function get_ping6_app_stat of the file ping6_response.cg of the component httpd. Performing manipulation of the argument ping6_ipaddr results in buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.
Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the curTime parameter on login.
Buffer Overflow vulnerabilty found in Nginx NJS v.0feca92 allows a remote attacker to execute arbitrary code via the njs_module_read in the njs_module.c file.
Buffer Overflow vulnerability in VIM v.8.1.2135 allows a remote attacker to execute arbitrary code via the operand parameter.
D-Link DIR3060 DIR3060A1_FW111B04.bin is vulnerable to Buffer Overflow.
A buffer overflow vulnerability in PAN-OS allows an unauthenticated attacker to disrupt system processes and potentially execute arbitrary code with root privileges by sending a malicious request to the Captive Portal or Multi-Factor Authentication interface. This issue impacts: All versions of PAN-OS 8.0; PAN-OS 8.1 versions earlier than PAN-OS 8.1.15; PAN-OS 9.0 versions earlier than PAN-OS 9.0.9; PAN-OS 9.1 versions earlier than PAN-OS 9.1.3.
Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the FILECODE parameter on login.
Buffer overflow vulnerability in Core FTP Server v1.2 Build 583, via a crafted username.
Multiple buffer overflows in Eudora Worldmail, possibly Worldmail 3 version 6.1.22.0, have unknown impact and attack vectors, as demonstrated by the (1) "Eudora WorldMail stack overflow" and (2) "Eudora WorldMail heap overflow" modules in VulnDisco Pack. NOTE: Some of these details are obtained from third party information. As of 20061118, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes.
Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via function fromSetRouteStatic.
On Juniper Networks SRX Series with ICAP (Internet Content Adaptation Protocol) redirect service enabled, processing a malformed HTTP message can lead to a Denial of Service (DoS) or Remote Code Execution (RCE) Continued processing of this malformed HTTP message may result in an extended Denial of Service (DoS) condition. The offending HTTP message that causes this issue may originate both from the HTTP server or the HTTP client. This issue affects Juniper Networks Junos OS on SRX Series: 18.1 versions prior to 18.1R3-S9 ; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3; 19.1 versions prior to 19.1R1-S5, 19.1R2; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS prior to 18.1R1.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_move_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument photo_name leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814 and classified as critical. Affected by this vulnerability is the function cgi_get_cooliris of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument path leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
A vulnerability classified as critical has been found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220. This affects the function setWiFiRepeaterCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
In Yokogawa WideField3 R1.01 - R4.03, a buffer overflow could be caused when a user loads a maliciously crafted project file.
Sophos XG Firewall 17.x through v17.5 MR12 allows a Buffer Overflow and remote code execution via the HTTP/S Bookmarks feature for clientless access. Hotfix HF062020.1 was published for all firewalls running v17.x.
An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple buffer overflow vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges. (The set of affected scripts is similar to CVE-2020-12266.)
A vulnerability classified as critical has been found in TOTOLINK N350RT 9.3.5u.6139_B20201216. This affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-273555. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability, which was classified as critical, was found in TOTOLINK CP450 4.1.0cu.747_B20191224. Affected is the function loginauth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument http_host leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-273558 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
webfsd 1.21 is vulnerable to a Buffer Overflow via a crafted request. This is due to the filename variable
In ACCEL-PPP (an implementation of PPTP/PPPoE/L2TP/SSTP), there is a buffer overflow when receiving an l2tp control packet ith an AVP which type is a string and no hidden flags, length set to less than 6. If your application is used in open networks or there are untrusted nodes in the network it is highly recommended to apply the patch. The problem was patched with commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b As a workaround changes of commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b can be applied to older versions.
An issue was discovered on Samsung mobile devices with P(9.0) devices (Qualcomm chipsets) software. There is a buffer overflow in the bootloader. The Samsung ID is SVE-2019-15399 (November 2019).
A buffer overflow in the M_LoadDefaults function in m_misc.c in id Tech 1 (aka Doom engine) allows arbitrary code execution via an unsafe usage of fscanf, because it does not limit the number of characters to be read in a format argument.
The server in Chocolate Doom 3.0.0 and Crispy Doom 5.8.0 doesn't validate the user-controlled num_players value, leading to a buffer overflow. A malicious user can overwrite the server's stack.
An issue was discovered in janus-gateway (aka Janus WebRTC Server) through 0.10.0. janus_get_codec_from_pt in utils.c has a Buffer Overflow via long value in an SDP Offer packet.
An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 (MTK chipsets). Code execution can occur via a custom AT command handler buffer overflow. The LG ID is LVE-SMP-200007 (June 2020).
HCL Domino is susceptible to a Buffer Overflow vulnerability in DXL due to improper validation of user input. A successful exploit could enable an attacker to crash Domino or execute attacker-controlled code on the server system.
There is a buffer overflow in librsa.so called by getwifipwdurl interface, resulting in code execution on Xiaomi router AX3600 with ROM version =rom< 1.1.12.
H3C N12 V100R005 contains a buffer overflow vulnerability due to the lack of length verification in the mac address editing function. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands by sending a POST request to /bin/webs.
Tenda AC8v4 V16.03.34.06 has a stack overflow vulnerability. Affected by this vulnerability is the function setSchedWifi of the file /goform/openSchedWifi. The manipulation of the argument schedEndTime leads to stack-based buffer overflow.
miniupnp before 4c90b87, as used in Bitcoin Core before 0.12 and other products, lacks checks for snprintf return values, leading to a buffer overflow and significant data leak, a different vulnerability than CVE-2019-12107. In Bitcoin Core before 0.12, remote code execution was possible in conjunction with CVE-2015-6031 exploitation.
An issue was discovered in janus-gateway (aka Janus WebRTC Server) through 0.10.0. janus_streaming_rtsp_parse_sdp in plugins/janus_streaming.c has a Buffer Overflow via a crafted RTSP server.
An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 (MTK chipsets). Code execution can occur via an MTK AT command handler buffer overflow. The LG ID is LVE-SMP-200008 (June 2020).
An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/openSchedWifi schedStartTime and schedEndTime parameters for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.
A remote buffer overflow vulnerability in the /cgi-bin/makeRequest.cgi endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to execute arbitrary machine instructions as root without authentication.
An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/addressNat entrys and mitInterface parameters for a POST request, a value is directly used in a sprintf to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.
An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/SetSpeedWan speed_dir parameter for a POST request, a value is directly used in a sprintf to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.
Memory corruption due to buffer copy without checking the size of input in WLAN Firmware while processing CCKM IE in reassoc response frame.
A buffer overflow vulnerability has been found in XAMPP affecting version 8.2.4 and earlier. An attacker could execute arbitrary code through a long file debug argument that controls the Structured Exception Handler (SEH).