A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (V1.81.01 - V1.81.03), LOGO! 8 BM (incl. SIPLUS variants) (V1.82.01), LOGO! 8 BM (incl. SIPLUS variants) (V1.82.02). A buffer overflow vulnerability exists in the Web Server functionality of the device. A remote unauthenticated attacker could send a specially crafted HTTP request to cause a memory corruption, potentially resulting in remote code execution.

A vulnerability was identified in INSTAR 2K+ and 4K 3.11.1 Build 1124. This affects the function base64_decode of the component fcgi_server. The manipulation of the argument Authorization leads to buffer overflow. It is possible to initiate the attack remotely.

Memory corruption due to buffer copy without checking the size of input in WLAN Firmware while processing CCKM IE in reassoc response frame.

A vulnerability has been identified in SICAM MMU (All versions < V2.05), SICAM SGU (All versions), SICAM T (All versions < V2.18). A buffer overflow in various positions of the web application might enable an attacker with access to the web application to execute arbitrary code over the network.

10-Strike Network Inventory Explorer v9.3 was discovered to contain a buffer overflow via the Add Computers function.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A buffer overflow vulnerability in the URL parser of the zhttpd web server in Zyxel VMG8825-T50K firmware versions prior to V5.50(ABOM.5)C0 could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and potentially execute arbitrary code by sending a specially crafted HTTP request.

PJSIP is a free and open source multimedia communication library written in C. In versions of PJSIP prior to 2.13 the PJSIP parser, PJMEDIA RTP decoder, and PJMEDIA SDP parser are affeced by a buffer overflow vulnerability. Users connecting to untrusted clients are at risk. This issue has been patched and is available as commit c4d3498 in the master branch and will be included in releases 2.13 and later. Users are advised to upgrade. There are no known workarounds for this issue.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Azure RTOS USBX is a USB host, device, and on-the-go (OTG) embedded stack, that is fully integrated with Azure RTOS ThreadX. Prior to version 6.1.12, the USB DFU UPLOAD functionality may be utilized to introduce a buffer overflow resulting in overwrite of memory contents. In particular cases this may allow an attacker to bypass security features or execute arbitrary code. The implementation of `ux_device_class_dfu_control_request` function prevents buffer overflow during handling of DFU UPLOAD command when current state is `UX_SYSTEM_DFU_STATE_DFU_IDLE`. This issue has been patched, please upgrade to version 6.1.12. As a workaround, add the `UPLOAD_LENGTH` check in all possible states.

TOTOLINK T6 V4.1.5cu.709_B20210518 is vulnerable to Buffer Overflow via cstecgi.cgi

Tenda RX9_Pro V22.03.02.10 is vulnerable to Buffer Overflow via httpd/SetNetControlList

A LoadLibraryEX vulnerability in Trend Micro Apex Central could allow an unauthenticated remote attacker to load an attacker-controlled DLL into a key executable, leading to execution of attacker-supplied code under the context of SYSTEM on affected installations.

Unauthenticated buffer overflow vulnerabilities exist within the Aruba InstantOS and ArubaOS 10 web management interface. Successful exploitation results in the execution of arbitrary commands on the underlying operating system of Aruba InstantOS 6.4.x: 6.4.4.8-4.2.4.20 and below; Aruba InstantOS 6.5.x: 6.5.4.23 and below; Aruba InstantOS 8.6.x: 8.6.0.18 and below; Aruba InstantOS 8.7.x: 8.7.1.9 and below; Aruba InstantOS 8.10.x: 8.10.0.1 and below; ArubaOS 10.3.x: 10.3.1.0 and below; Aruba has released upgrades for Aruba InnstantOS that address these security vulnerabilities.

webfsd 1.21 is vulnerable to a Buffer Overflow via a crafted request. This is due to the filename variable

In TOTOLINK A860R V4.1.2cu.5182_B20201027, the parameters in infostat.cgi are not filtered, causing a buffer overflow vulnerability.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system of Aruba InstantOS 6.4.x: 6.4.4.8-4.2.4.20 and below; Aruba InstantOS 6.5.x: 6.5.4.23 and below; Aruba InstantOS 8.6.x: 8.6.0.18 and below; Aruba InstantOS 8.7.x: 8.7.1.9 and below; Aruba InstantOS 8.10.x: 8.10.0.1 and below; ArubaOS 10.3.x: 10.3.1.0 and below; Aruba has released upgrades for Aruba InnstantOS that address these security vulnerabilities.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system of Aruba InstantOS 6.4.x: 6.4.4.8-4.2.4.20 and below; Aruba InstantOS 6.5.x: 6.5.4.23 and below; Aruba InstantOS 8.6.x: 8.6.0.18 and below; Aruba InstantOS 8.7.x: 8.7.1.9 and below; Aruba InstantOS 8.10.x: 8.10.0.1 and below; ArubaOS 10.3.x: 10.3.1.0 and below; Aruba has released upgrades for Aruba InnstantOS that address these security vulnerabilities.

An issue was discovered on Samsung mobile devices with any (before February 2020 for Exynos modem chipsets) software. There is a buffer overflow in baseband CP message decoding. The Samsung IDs are SVE-2019-15816 and SVE-2019-15817 (February 2020).

zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference).

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Buffer Overflow via cgibin, hnap_main,

Tenda AC15 WiFi Router V15.03.05.19_multi and AC18 WiFi Router V15.03.05.19_multi were discovered to contain a buffer overflow via the page parameter at /goform/NatStaticSetting.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) (Exynos chipsets) software. The secure bootloade has a buffer overflow of the USB buffer, leading to arbitrary code execution. The Samsung ID is SVE-2019-15872 (January 2020).

In TOTOLINK A860R V4.1.2cu.5182_B20201027, the main function in downloadfile.cgi has a buffer overflow vulnerability.

The Zephyr MQTT parsing code performs insufficient checking of the length field on publish messages, allowing a buffer overflow and potentially remote code execution. NCC-ZEP-031 This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions.

Tenda AC15 WiFi Router V15.03.05.19_multi and AC18 WiFi Router V15.03.05.19_multi were discovered to contain a buffer overflow via the filePath parameter at /goform/expandDlnaFile.

There are buffer overflow vulnerabilities in multiple underlying services that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system of Aruba InstantOS 6.4.x: 6.4.4.8-4.2.4.20 and below; Aruba InstantOS 6.5.x: 6.5.4.23 and below; Aruba InstantOS 8.6.x: 8.6.0.18 and below; Aruba InstantOS 8.7.x: 8.7.1.9 and below; Aruba InstantOS 8.10.x: 8.10.0.1 and below; ArubaOS 10.3.x: 10.3.1.0 and below; Aruba has released upgrades for Aruba InnstantOS that address these security vulnerabilities.

A buffer overflow in the FTcpListener thread in The Isle Evrima (the dedicated server on Windows and Linux) 0.9.88.07 before 2022-08-12 allows a remote attacker to crash any server with an accessible RCON port, or possibly execute arbitrary code.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. In the RPL-Classic routing protocol implementation in the Contiki-NG operating system, an incoming DODAG Information Option (DIO) control message can contain a prefix information option with a length parameter. The value of the length parameter is not validated, however, and it is possible to cause a buffer overflow when copying the prefix in the set_ip_from_prefix function. This vulnerability affects anyone running a Contiki-NG version prior to 4.7 that can receive RPL DIO messages from external parties. To obtain a patched version, users should upgrade to Contiki-NG 4.7 or later. There are no workarounds for this issue.

Capstone is a disassembly framework. In versions 6.0.0-Alpha5 and prior, an unchecked vsnprintf return in SStream_concat lets a malicious cs_opt_mem.vsnprintf drive SStream’s index negative or past the end, leading to a stack buffer underflow/overflow when the next write occurs. Commit 2c7797182a1618be12017d7d41e0b6581d5d529e fixes the issue.

In D-Link DAP1650 v1.04 firmware, the fileaccess.cgi program in the firmware has a buffer overflow vulnerability caused by strncpy.

In Tenda G3 US_G3V3.0br_V15.11.0.6(7663)_EN_TDE, there is a buffer overflow vulnerability caused by sprintf in function in the httpd binary.

gnuplot v5.5 was discovered to contain a buffer overflow via the function plotrequest().

A vulnerability has been identified in LOGO! 12/24RCE (6ED1052-1MD08-0BA1) (All versions), LOGO! 12/24RCEo (6ED1052-2MD08-0BA1) (All versions), LOGO! 230RCE (6ED1052-1FB08-0BA1) (All versions), LOGO! 230RCEo (6ED1052-2FB08-0BA1) (All versions), LOGO! 24CE (6ED1052-1CC08-0BA1) (All versions), LOGO! 24CEo (6ED1052-2CC08-0BA1) (All versions), LOGO! 24RCE (6ED1052-1HB08-0BA1) (All versions), LOGO! 24RCEo (6ED1052-2HB08-0BA1) (All versions), SIPLUS LOGO! 12/24RCE (6AG1052-1MD08-7BA1) (All versions), SIPLUS LOGO! 12/24RCEo (6AG1052-2MD08-7BA1) (All versions), SIPLUS LOGO! 230RCE (6AG1052-1FB08-7BA1) (All versions), SIPLUS LOGO! 230RCEo (6AG1052-2FB08-7BA1) (All versions), SIPLUS LOGO! 24CE (6AG1052-1CC08-7BA1) (All versions), SIPLUS LOGO! 24CEo (6AG1052-2CC08-7BA1) (All versions), SIPLUS LOGO! 24RCE (6AG1052-1HB08-7BA1) (All versions), SIPLUS LOGO! 24RCEo (6AG1052-2HB08-7BA1) (All versions). Affected devices do not properly validate the structure of TCP packets in several methods. This could allow an attacker to cause buffer overflows, get control over the instruction counter and run custom code.

In Tenda G3 US_G3V3.0br_V15.11.0.6(7663)_EN_TDE, in httpd binary, the addDhcpRule function has a buffer overflow caused by sscanf.

Buffer overflow vulnerability in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

A buffer overflow vulnerability exists in TOTOLINK A950RG V4.1.2cu.5204_B20210112. The issue resides in the setRadvdCfg interface of the /lib/cste_modules/ipv6.so module. The function fails to properly validate the length of the user-controlled radvdinterfacename parameter, allowing remote attackers to trigger a stack buffer overflow.

A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228 and classified as critical. Affected by this issue is the function setDiagnosisCfg. The manipulation leads to buffer overflow. The attack may be launched remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A vulnerability was discovered in the IPv6 fragmentation reassembly implementation of RIOT OS v2025.07. When copying the contents of the first fragment (offset=0) into the reassembly buffer, no size check is performed. It is possible to force the creation of a small reassembly buffer by first sending a shorter fragment (also with offset=0). Overflowing the reassembly buffer corrupts the state of other packet buffers which an attacker might be able to used to achieve further memory corruption (potentially resulting in remote code execution). To trigger the vulnerability, the `gnrc_ipv6_ext_frag` module must be included and the attacker must be able to send arbitrary IPv6 packets to the victim. Version 2025.10 fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char).

GVRET Stable Release as of Aug 15, 2015 was discovered to contain a buffer overflow via the handleConfigCmd function at SerialConsole.cpp.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via the password parameter in function loginAuth .

A vulnerability classified as critical was found in Tenda i22 1.0.0.3(4687). This vulnerability affects the function formApPortalAccessCodeAuth of the file /goform/apPortalAccessCodeAuth. The manipulation of the argument accessCode/data/acceInfo leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a buffer overflow via the nav2_amcl process. This vulnerability is triggered via sending a crafted .yaml file.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. A Buffer overflow in the built-in web server allows remote attackers to initiate DoS, and probably to execute arbitrary code (issue 1 of 2).

Memory corruption due to buffer copy without checking the size of input in modem while decoding raw SMS received.