The Breakdance plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.7.1 via post meta data. This is due to the plugin storing custom data in metadata without an underscore prefix. This makes it possible for lower privileged users, such as contributors, to edit this data via UI. As a result they can escalate their privileges or execute arbitrary code.

PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab `v0.8.3` through `v0.8.5` allow arbitrary JavaScript execution through `POST /wait` and `POST /tabs/{id}/wait` when the request uses `fn` mode, even if `security.allowEvaluate` is disabled. `POST /evaluate` correctly enforces the `security.allowEvaluate` guard, which is disabled by default. However, in the affected releases, `POST /wait` accepted a user-controlled `fn` expression, embedded it directly into executable JavaScript, and evaluated it in the browser context without checking the same policy. This is a security-policy bypass rather than a separate authentication bypass. Exploitation still requires authenticated API access, but a caller with the server token can execute arbitrary JavaScript in a tab context even when the operator explicitly disabled JavaScript evaluation. The current worktree fixes this by applying the same policy boundary to `fn` mode in `/wait` that already exists on `/evaluate`, while preserving the non-code wait modes. As of time of publication, a patched version is not yet available.

Due to the unrestricted scope of the RFC function module, SAP BASIS - versions 731, 740, 750, 751, 752, 753, 754, 755, 756, 757, 789, 790, 791, allows an authenticated non-administrator attacker to access a system class and execute any of its public methods with parameters provided by the attacker. On successful exploitation the attacker can have full control of the system to which the class belongs, causing a high impact on the integrity of the application.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Commvault CommCell 11.22.22. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the DataProvider class. The issue results from the lack of proper validation of a user-supplied string before executing it as JavaScript code. An attacker can leverage this vulnerability to escape the JavaScript sandbox and execute Java code in the context of NETWORK SERVICE. Was ZDI-CAN-13755.

This affects versions of the package unisharp/laravel-filemanager before 2.6.2. The upload() function does not sufficiently validate the file type when uploading. An attacker may be able to reproduce the following steps: 1. Install a package with a web Laravel application. 2. Navigate to the Upload window 3. Upload an image file, then capture the request 4. Edit the request contents with a malicious file (webshell) 5. Enter the path of file uploaded on URL - Remote Code Execution **Note:** Prevention for bad extensions can be done by using a whitelist in the config file(lfm.php). Corresponding document can be found in [here](https://unisharp.github.io/laravel-filemanager/configfolder-categories).

Wazuh v3.6.1 - v3.13.5, v4.0.0 - v4.2.7, and v4.3.0 - v4.3.7 were discovered to contain an authenticated remote code execution (RCE) vulnerability via the Active Response endpoint.

Cloud CLI (aka Claude Code UI) is a desktop and mobile UI for Claude Code, Cursor CLI, Codex, and Gemini-CLI. Prior to 1.24.0, The /api/user/git-config endpoint constructs shell commands by interpolating user-supplied gitName and gitEmail values into command strings passed to child_process.exec(). The input is placed within double quotes and only " is escaped, but backticks (`), $() command substitution, and \ sequences are all interpreted within double-quoted strings in bash. This allows authenticated attackers to execute arbitrary OS commands via the git configuration endpoint. This vulnerability is fixed in 1.24.0.

A vulnerability in Example Dags of Apache Airflow allows an attacker with UI access who can trigger DAGs, to execute arbitrary commands via manually provided run_id parameter. This issue affects Apache Airflow Apache Airflow versions prior to 2.4.0.

TP Link Archer AX10 V1 Firmware Version 1.3.1 Build 20220401 Rel. 57450(5553) was discovered to allow authenticated attackers to execute arbitrary code via a crafted backup file.

A vulnerability was discovered in FBM_292W-21.03.10V, which has been classified as critical. This issue affects the sub_4901E0 function in the msp_info.htm file. Manipulation of the path parameter can lead to command injection.

Connect-CMS is a content management system. In versions on the 1.x series up to and including 1.41.0 and versions on the 2.x series up to and including 2.41.0, an authenticated user may be able to execute arbitrary code in the Code Study Plugin. Versions 1.41.1 and 2.41.1 contain a patch.

Craft is a content management system (CMS). Prior to 5.9.9 and 4.17.4, a Remote Code Execution vulnerability exists in the Craft CMS 5 conditions system. The BaseElementSelectConditionRule::getElementIds() method passes user-controlled string input through renderObjectTemplate() -- an unsandboxed Twig rendering function with escaping disabled. Any authenticated Control Panel user (including non-admin roles such as Author or Editor) can achieve full RCE by sending a crafted condition rule via standard element listing endpoints. This vulnerability requires no admin privileges, no special permissions beyond basic control panel access, and bypasses all production hardening settings (allowAdminChanges: false, devMode: false, enableTwigSandbox: true). Users should update to the patched 5.9.9 or 4.17.4 release to mitigate the issue.

iKuai OS v3.6.7 was discovered to contain an authenticated remote code execution (RCE) vulnerability.

kartverket/github-workflows are shared reusable workflows for GitHub Actions. Prior to version 2.7.5, all users of the `run-terraform` reusable workflow from the kartverket/github-workflows repo are affected by a code injection vulnerability. A malicious actor could potentially send a PR with a malicious payload leading to execution of arbitrary JavaScript code in the context of the workflow. Users should upgrade to at least version 2.7.5 to resolve the issue. As a workaround, review any pull requests from external users for malicious payloads before allowing them to trigger a build.

In Dolibarr ERP & CRM <= 22.0.4, PHP code detection and editing permission enforcement in the Website module is not applied consistently to all input parameters, allowing an authenticated user restricted to HTML/JavaScript editing to inject PHP code through unprotected inputs during website page creation.

Chamilo LMS is a learning management system. Prior to version 1.11.36, an arbitrary file upload vulnerability in the H5P Import feature allows authenticated users with Teacher role to achieve Remote Code Execution (RCE). The H5P package validation only checks if h5p.json exists but doesn't block .htaccess or PHP files with alternative extensions. An attacker uploads a crafted H5P package containing a webshell and .htaccess that enables PHP execution for .txt files, bypassing security control. This issue has been patched in version 1.11.36.

Insufficient input validation of the `plugin` parameter of the `create_user` plugin allows arbitrary Perl code execution on behalf of the already authenticated account's system user.

A low privileged remote attacker with write permissions can reconfigure the SNMP service due to improper input validation.

The `/registercrd` endpoint in KubePlus 4.14 in the kubeconfiggenerator component is vulnerable to command injection. The component uses `subprocess.Popen()` with `shell=True` parameter to execute shell commands, and the user-supplied `chartName` parameter is directly concatenated into the command string without any sanitization or validation. An attacker can inject arbitrary shell commands by crafting a malicious `chartName` parameter value.

Daylight Studio FuelCMS v1.5.2 was discovered to contain an authenticated remote code execution (RCE) vulnerability in the Blocks module.

SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. Prior to versions 7.15.1 and 8.9.3, an Authenticated Remote Code Execution (RCE) vulnerability exists in SuiteCRM modules. Versions 7.15.1 and 8.9.3 patch the issue.

October CMS is a self-hosted content management system (CMS) platform based on the Laravel PHP Framework. Prior to versions 1.0.473 and 1.1.6, an attacker with access to the backend is able to execute PHP code by using the theme import feature. This will bypass the safe mode feature that prevents PHP execution in the CMS templates.The issue has been patched in Build 473 (v1.0.473) and v1.1.6. Those unable to upgrade may apply the patch to their installation manually as a workaround.

RAGFlow is an open-source RAG (Retrieval-Augmented Generation) engine. In versions 0.24.0 and prior, a Server-Side Template Injection (SSTI) vulnerability exists in RAGFlow's Agent workflow Text Processing (StringTransform) and Message components. These components use Python's jinja2.Template (unsandboxed) to render user-supplied templates, allowing any authenticated user to execute arbitrary operating system commands on the server. At time of publication, there are no publicly available patches.

The SPIP interface_traduction_objets plugin versions prior to 2.2.2 contain an authenticated remote code execution vulnerability in the translation interface workflow. The plugin incorporates untrusted request data into a hidden form field that is rendered without SPIP output filtering. Because fields prefixed with an underscore bypass protection mechanisms and the hidden content is rendered with filtering disabled, an authenticated attacker with editor-level privileges can inject crafted content that is evaluated through SPIP's template processing chain, resulting in execution of code in the context of the web server.

Azure CycleCloud Remote Code Execution Vulnerability

n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could leverage the Merge node's SQL query mode to execute arbitrary code and write arbitrary files on the n8n server. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Merge node by adding `n8n-nodes-base.merge` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

An issue in the js_localize.php function of LimeSurvey v6.6.2 and before allows attackers to execute arbitrary code via injecting a crafted payload into the lng parameter of the js_localize.php function

n8n is an open source workflow automation platform. Prior to versions 2.2.0 and 1.123.8, an authenticated user with permission to create or modify workflows could chain the Read/Write Files from Disk node with git operations to achieve remote code execution. By writing to specific configuration files and then triggering a git operation, the attacker could execute arbitrary shell commands on the n8n host. The issue has been fixed in n8n versions 2.2.0 and 1.123.8. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Read/Write Files from Disk node by adding `n8n-nodes-base.readWriteFile` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures.

SeaCMS 13.0 has a remote code execution vulnerability. The reason for this vulnerability is that although admin_files.php imposes restrictions on edited files, attackers can still bypass these restrictions and write code, allowing authenticated attackers to exploit the vulnerability to execute arbitrary commands and gain system privileges.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setAccessDeviceCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

OpenAM is an open access management solution. In versions 15.0.3 and prior, the `getCustomLoginUrlTemplate` method in RealmOAuth2ProviderSettings.java is vulnerable to template injection due to its usage of user input. Although the developer intended to implement a custom URL for handling login to override the default OpenAM login, they did not restrict the `CustomLoginUrlTemplate`, allowing it to be set freely. Commit fcb8432aa77d5b2e147624fe954cb150c568e0b8 introduces `TemplateClassResolver.SAFER_RESOLVER` to disable the resolution of commonly exploited classes in FreeMarker template injection. As of time of publication, this fix is expected to be part of version 15.0.4.

Invision Community (aka IPS Community Suite) before 4.6.0 allows eval-based PHP code injection by a moderator because the IPS\cms\modules\front\pages\_builder::previewBlock method interacts unsafely with the IPS\_Theme::runProcessFunction method.

Authenticated user can upload a malicious file to the server and execute it, which leads to remote code execution.

A vulnerability in the Web Interface component of Mitel MiCollab through 9.8 SP1 (9.8.1.5) and MiVoice Business Solution Virtual Instance (MiVB SVI) through 1.0.0.27 could allow an authenticated attacker to conduct a command injection attack, due to insufficient parameter sanitization. A successful exploit could allow an attacker to execute arbitrary commands with elevated privileges within the context of the system.

Yoke is a Helm-inspired infrastructure-as-code (IaC) package deployer. In 0.19.0 and earlier, a vulnerability exists in the Air Traffic Controller (ATC) component of Yoke. It allows users with CR create/update permissions to execute arbitrary WASM code in the ATC controller context by injecting a malicious URL through the overrides.yoke.cd/flight annotation. The ATC controller downloads and executes the WASM module without proper URL validation, enabling attackers to create arbitrary Kubernetes resources or potentially escalate privileges to cluster-admin level.

HMS Networks Ewon Flexy with firmware before 15.0s4, Cosy+ with firmware 22.xx before 22.1s6, and Cosy+ with firmware 23.xx before 23.0s3 have improper neutralization of special elements used in an OS command allowing remote code execution by attackers with low privilege access on the gateway, provided the attacker has credentials.

Chartbrew is an open-source web application that can connect directly to databases and APIs and use the data to create charts. Prior to version 4.8.1, there is a remote code execution vulnerability via a vulnerable API. This issue has been patched in version 4.8.1.

Account users are allowed by default to register templates to be downloaded directly to the primary storage for deploying instances using the KVM hypervisor. Due to missing file name sanitization, an attacker can register malicious templates to execute arbitrary code on the KVM hosts. This can result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of the KVM-based infrastructure managed by CloudStack. Users are recommended to upgrade to Apache CloudStack versions 4.20.3.0 or 4.22.0.1, or later, which fixes this issue.

OpenBullet2 through version 0.3.2 contains an authenticated remote code execution vulnerability that allows authenticated users to execute arbitrary C# code on the server host by creating or modifying job configurations. Attackers can leverage the plain C# execution mode, which lacks reference filtering or API restrictions, to access the file system, spawn processes, and invoke arbitrary .NET APIs as the process user.

CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.28.5.0, an authenticated user with file editor permissions can achieve Remote Code Execution (RCE) by leveraging the file creation and save endpoints, an attacker can upload and execute arbitrary PHP code on the server. This issue has been patched in version 0.28.5.0.

Claude Code is an agentic coding tool. Prior to version 2.0.72, due to an error in command parsing, it was possible to bypass the Claude Code confirmation prompt to trigger execution of untrusted commands through the find command. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This issue has been patched in version 2.0.72.

AutoGPT is a platform that allows users to create, deploy, and manage continuous artificial intelligence agents that automate complex workflows. Prior to autogpt-platform-beta-v0.6.44, AutoGPT Platform's block execution endpoints (both main web API and external API) allow executing blocks by UUID without checking the `disabled` flag. Any authenticated user can execute the disabled `BlockInstallationBlock`, which writes arbitrary Python code to the server filesystem and executes it via `__import__()`, achieving Remote Code Execution. In default self-hosted deployments where Supabase signup is enabled, an attacker can self-register; if signup is disabled (e.g., hosted), the attacker needs an existing account. autogpt-platform-beta-v0.6.44 contains a fix.

Erugo is a self-hosted file-sharing platform. In versions up to and including 0.2.14, an authenticated low-privileged user can upload arbitrary files to any specified location due to insufficient validation of user‑supplied paths when creating shares. By specifying a writable path within the public web root, an attacker can upload and execute arbitrary code on the server, resulting in remote code execution (RCE). This vulnerability allows a low-privileged user to fully compromise the affected Erugo instance. Version 0.2.15 fixes the issue.

A vulnerability found in UniFi Talk application V1.12.3 and earlier permits a malicious actor who has already gained access to a network to subsequently control Talk device(s) assigned to said network if they are not yet adopted. This vulnerability is fixed in UniFi Talk application V1.12.5 and later.

Skipper is an HTTP router and reverse proxy for service composition. The default skipper configuration before 0.23.0 was -lua-sources=inline,file. The problem starts if untrusted users can create lua filters, because of -lua-sources=inline , for example through a Kubernetes Ingress resource. The configuration inline allows these user to create a script that is able to read the filesystem accessible to the skipper process and if the user has access to read the logs, they an read skipper secrets. This vulnerability is fixed in 0.23.0.

There is a remote code execution vulnerability in SeaCMS 12.9. The vulnerability is caused by phomebak.php writing some variable names passed in without filtering them before writing them into the php file. An authenticated attacker can exploit this vulnerability to execute arbitrary commands and obtain system permissions.

A security vulnerability has been detected in Kohana KodiCMS up to 13.82.135. This impacts the function Save of the file cms/modules/kodicms/classes/kodicms/model/file.php of the component Layout API Endpoint. The manipulation of the argument content leads to code injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.5.7 and 1.6.2, EnvoyExtensionPolicy Lua scripts executed by Envoy proxy can be used to leak the proxy's credentials. These credentials can then be used to communicate with the control plane and gain access to all secrets that are used by Envoy proxy, e.g. TLS private keys and credentials used for downstream and upstream communication. This vulnerability is fixed in 1.5.7 and 1.6.2.

RCE in SPIP 3.1.13 through 4.1.2 allows remote authenticated users to execute arbitrary code via the _oups parameter.

XWiki Platform Wiki UI Main Wiki is software for managing subwikis on XWiki Platform, a generic wiki platform. Starting with version 5.3-milestone-2 and prior to versions 13.10.6 and 14.4, it's possible to inject arbitrary wiki syntax including Groovy, Python and Velocity script macros via the request (URL parameter) using the `XWikiServerClassSheet` if the user has view access to this sheet and another page that has been saved with programming rights, a standard condition on a public read-only XWiki installation or a private XWiki installation where the user has an account. This allows arbitrary Groovy/Python/Velocity code execution which allows bypassing all rights checks and thus both modification and disclosure of all content stored in the XWiki installation. Also, this could be used to impact the availability of the wiki. This has been patched in versions 13.10.6 and 14.4. As a workaround, edit the affected document `XWiki.XWikiServerClassSheet` or `WikiManager.XWikiServerClassSheet` and manually perform the changes from the patch fixing the issue. On XWiki versions 12.0 and later, it is also possible to import the document `XWiki.XWikiServerClassSheet` from the xwiki-platform-wiki-ui-mainwiki package version 14.4 using the import feature of the administration application as there have been no other changes to this document since XWiki 12.0.