In the Linux kernel, the following vulnerability has been resolved: jfs: add sanity check for agwidth in dbMount The width in dmapctl of the AG is zero, it trigger a divide error when calculating the control page level in dbAllocAG. To avoid this issue, add a check for agwidth in dbAllocAG.

swtpm is a libtpms-based TPM emulator with socket, character device, and Linux CUSE interface. Versions prior to 0.5.3, 0.6.2, and 0.7.1 are vulnerable to out-of-bounds read. A specially crafted header of swtpm's state, where the blobheader's hdrsize indicator has an invalid value, may cause an out-of-bounds access when the byte array representing the state of the TPM is accessed. This will likely crash swtpm or prevent it from starting since the state cannot be understood. Users should upgrade to swtpm v0.5.3, v0.6.2, or v0.7.1 to receive a patch. There are currently no known workarounds.

In the Linux kernel, the following vulnerability has been resolved: bpf: fix ktls panic with sockmap [ 2172.936997] ------------[ cut here ]------------ [ 2172.936999] kernel BUG at lib/iov_iter.c:629! ...... [ 2172.944996] PKRU: 55555554 [ 2172.945155] Call Trace: [ 2172.945299] <TASK> [ 2172.945428] ? die+0x36/0x90 [ 2172.945601] ? do_trap+0xdd/0x100 [ 2172.945795] ? iov_iter_revert+0x178/0x180 [ 2172.946031] ? iov_iter_revert+0x178/0x180 [ 2172.946267] ? do_error_trap+0x7d/0x110 [ 2172.946499] ? iov_iter_revert+0x178/0x180 [ 2172.946736] ? exc_invalid_op+0x50/0x70 [ 2172.946961] ? iov_iter_revert+0x178/0x180 [ 2172.947197] ? asm_exc_invalid_op+0x1a/0x20 [ 2172.947446] ? iov_iter_revert+0x178/0x180 [ 2172.947683] ? iov_iter_revert+0x5c/0x180 [ 2172.947913] tls_sw_sendmsg_locked.isra.0+0x794/0x840 [ 2172.948206] tls_sw_sendmsg+0x52/0x80 [ 2172.948420] ? inet_sendmsg+0x1f/0x70 [ 2172.948634] __sys_sendto+0x1cd/0x200 [ 2172.948848] ? find_held_lock+0x2b/0x80 [ 2172.949072] ? syscall_trace_enter+0x140/0x270 [ 2172.949330] ? __lock_release.isra.0+0x5e/0x170 [ 2172.949595] ? find_held_lock+0x2b/0x80 [ 2172.949817] ? syscall_trace_enter+0x140/0x270 [ 2172.950211] ? lockdep_hardirqs_on_prepare+0xda/0x190 [ 2172.950632] ? ktime_get_coarse_real_ts64+0xc2/0xd0 [ 2172.951036] __x64_sys_sendto+0x24/0x30 [ 2172.951382] do_syscall_64+0x90/0x170 ...... After calling bpf_exec_tx_verdict(), the size of msg_pl->sg may increase, e.g., when the BPF program executes bpf_msg_push_data(). If the BPF program sets cork_bytes and sg.size is smaller than cork_bytes, it will return -ENOSPC and attempt to roll back to the non-zero copy logic. However, during rollback, msg->msg_iter is reset, but since msg_pl->sg.size has been increased, subsequent executions will exceed the actual size of msg_iter. ''' iov_iter_revert(&msg->msg_iter, msg_pl->sg.size - orig_size); ''' The changes in this commit are based on the following considerations: 1. When cork_bytes is set, rolling back to non-zero copy logic is pointless and can directly go to zero-copy logic. 2. We can not calculate the correct number of bytes to revert msg_iter. Assume the original data is "abcdefgh" (8 bytes), and after 3 pushes by the BPF program, it becomes 11-byte data: "abc?de?fgh?". Then, we set cork_bytes to 6, which means the first 6 bytes have been processed, and the remaining 5 bytes "?fgh?" will be cached until the length meets the cork_bytes requirement. However, some data in "?fgh?" is not within 'sg->msg_iter' (but in msg_pl instead), especially the data "?" we pushed. So it doesn't seem as simple as just reverting through an offset of msg_iter. 3. For non-TLS sockets in tcp_bpf_sendmsg, when a "cork" situation occurs, the user-space send() doesn't return an error, and the returned length is the same as the input length parameter, even if some data is cached. Additionally, I saw that the current non-zero-copy logic for handling corking is written as: ''' line 1177 else if (ret != -EAGAIN) { if (ret == -ENOSPC) ret = 0; goto send_end; ''' So it's ok to just return 'copied' without error when a "cork" situation occurs.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix unsafe attribute parsing in output_userspace() This patch replaces the manual Netlink attribute iteration in output_userspace() with nla_for_each_nested(), which ensures that only well-formed attributes are processed.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() The variable d->name, returned by devm_kasprintf(), could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool

In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/smu11: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71)

In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix NULL pointer dereference in vcc_sendmsg() atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix workqueue crash in cma_netevent_work_handler struct rdma_cm_id has member "struct work_struct net_work" that is reused for enqueuing cma_netevent_work_handler()s onto cma_wq. Below crash[1] can occur if more than one call to cma_netevent_callback() occurs in quick succession, which further enqueues cma_netevent_work_handler()s for the same rdma_cm_id, overwriting any previously queued work-item(s) that was just scheduled to run i.e. there is no guarantee the queued work item may run between two successive calls to cma_netevent_callback() and the 2nd INIT_WORK would overwrite the 1st work item (for the same rdma_cm_id), despite grabbing id_table_lock during enqueue. Also drgn analysis [2] indicates the work item was likely overwritten. Fix this by moving the INIT_WORK() to __rdma_create_id(), so that it doesn't race with any existing queue_work() or its worker thread. [1] Trimmed crash stack: ============================================= BUG: kernel NULL pointer dereference, address: 0000000000000008 kworker/u256:6 ... 6.12.0-0... Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm) RIP: 0010:process_one_work+0xba/0x31a Call Trace: worker_thread+0x266/0x3a0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 ============================================= [2] drgn crash analysis: >>> trace = prog.crashed_thread().stack_trace() >>> trace (0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15) (1) __crash_kexec (kernel/crash_core.c:122:4) (2) panic (kernel/panic.c:399:3) (3) oops_end (arch/x86/kernel/dumpstack.c:382:3) ... (8) process_one_work (kernel/workqueue.c:3168:2) (9) process_scheduled_works (kernel/workqueue.c:3310:3) (10) worker_thread (kernel/workqueue.c:3391:4) (11) kthread (kernel/kthread.c:389:9) Line workqueue.c:3168 for this kernel version is in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); >>> trace[8]["work"] *(struct work_struct *)0xffff92577d0a21d8 = { .data = (atomic_long_t){ .counter = (s64)536870912, <=== Note }, .entry = (struct list_head){ .next = (struct list_head *)0xffff924d075924c0, .prev = (struct list_head *)0xffff924d075924c0, }, .func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280, } Suspicion is that pwq is NULL: >>> trace[8]["pwq"] (struct pool_workqueue *)<absent> In process_one_work(), pwq is assigned from: struct pool_workqueue *pwq = get_work_pwq(work); and get_work_pwq() is: static struct pool_workqueue *get_work_pwq(struct work_struct *work) { unsigned long data = atomic_long_read(&work->data); if (data & WORK_STRUCT_PWQ) return work_struct_pwq(data); else return NULL; } WORK_STRUCT_PWQ is 0x4: >>> print(repr(prog['WORK_STRUCT_PWQ'])) Object(prog, 'enum work_flags', value=4) But work->data is 536870912 which is 0x20000000. So, get_work_pwq() returns NULL and we crash in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); =============================================

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: disable napi on driver removal A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: <TASK> mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: media: cxusb: no longer judge rbuf when the write fails syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Silence oversized kvmalloc() warning syzkaller triggered an oversized kvmalloc() warning. Silence it by adding __GFP_NOWARN. syzkaller log: WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180 CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__kvmalloc_node_noprof+0x175/0x180 RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246 RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002 RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000 R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_umem_odp_get+0x1f6/0x390 mlx5_ib_reg_user_mr+0x1e8/0x450 ib_uverbs_reg_mr+0x28b/0x440 ib_uverbs_write+0x7d3/0xa30 vfs_write+0x1ac/0x6c0 ksys_write+0x134/0x170 ? __sanitizer_cov_trace_pc+0x1c/0x50 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users Support for eBPF programs loaded by unprivileged users is typically disabled. This means only cBPF programs need to be mitigated for BHB. In addition, only mitigate cBPF programs that were loaded by an unprivileged user. Privileged users can also load the same program via eBPF, making the mitigation pointless.

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: do not ping device which has failed to load firmware Syzkaller reports [1, 2] crashes caused by an attempts to ping the device which has failed to load firmware. Since such a device doesn't pass 'ieee80211_register_hw()', an internal workqueue managed by 'ieee80211_queue_work()' is not yet created and an attempt to queue work on it causes null-ptr-deref. [1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff [2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Return NULL from huge_pte_offset() for invalid PMD LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot even if the underlying entry points to invalid_pte_table (indicating no mapping). Callers like smaps_hugetlb_range() fetch this invalid entry value (the address of invalid_pte_table) via this pointer. The generic is_swap_pte() check then incorrectly identifies this address as a swap entry on LoongArch, because it satisfies the "!pte_present() && !pte_none()" conditions. This misinterpretation, combined with a coincidental match by is_migration_entry() on the address bits, leads to kernel crashes in pfn_swap_entry_to_page(). Fix this at the architecture level by modifying huge_pte_offset() to check the PMD entry's content using pmd_none() before returning. If the entry is invalid (i.e., it points to invalid_pte_table), return NULL instead of the pointer to the slot.

In the Linux kernel, the following vulnerability has been resolved: serial: Fix potential null-ptr-deref in mlb_usio_probe() devm_ioremap() can return NULL on error. Currently, mlb_usio_probe() does not check for this case, which could result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: fix XQE dma address error The dma addresses of EQE and AEQE are wrong after migration and results in guest kernel-mode encryption services failure. Comparing the definition of hardware registers, we found that there was an error when the data read from the register was combined into an address. Therefore, the address combination sequence needs to be corrected. Even after fixing the above problem, we still have an issue where the Guest from an old kernel can get migrated to new kernel and may result in wrong data. In order to ensure that the address is correct after migration, if an old magic number is detected, the dma address needs to be updated.

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix a possible null pointer dereference In tegra_crtc_reset(), new memory is allocated with kzalloc(), but no check is performed. Before calling __drm_atomic_helper_crtc_reset, state should be checked to prevent possible null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: protect vq->log_used with vq->mutex The vhost-scsi completion path may access vq->log_base when vq->log_used is already set to false. vhost-thread QEMU-thread vhost_scsi_complete_cmd_work() -> vhost_add_used() -> vhost_add_used_n() if (unlikely(vq->log_used)) QEMU disables vq->log_used via VHOST_SET_VRING_ADDR. mutex_lock(&vq->mutex); vq->log_used = false now! mutex_unlock(&vq->mutex); QEMU gfree(vq->log_base) log_used() -> log_write(vq->log_base) Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be reclaimed via gfree(). As a result, this causes invalid memory writes to QEMU userspace. The control queue path has the same issue.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Disable MACsec offload for uplink representor profile MACsec offload is not supported in switchdev mode for uplink representors. When switching to the uplink representor profile, the MACsec offload feature must be cleared from the netdevice's features. If left enabled, attempts to add offloads result in a null pointer dereference, as the uplink representor does not support MACsec offload even though the feature bit remains set. Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features(). Kernel log: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x128/0x1dd0 Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff RSP: 0018:ffff888147a4f160 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078 RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000 FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? __mutex_lock+0x128/0x1dd0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mutex_lock_io_nested+0x1ae0/0x1ae0 ? lock_acquire+0x1c2/0x530 ? macsec_upd_offload+0x145/0x380 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? kasan_save_stack+0x30/0x40 ? kasan_save_stack+0x20/0x40 ? kasan_save_track+0x10/0x30 ? __kasan_kmalloc+0x77/0x90 ? __kmalloc_noprof+0x249/0x6b0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core] macsec_update_offload+0x26c/0x820 ? macsec_set_mac_address+0x4b0/0x4b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? _raw_spin_unlock_irqrestore+0x47/0x50 macsec_upd_offload+0x2c8/0x380 ? macsec_update_offload+0x820/0x820 ? __nla_parse+0x22/0x30 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240 genl_family_rcv_msg_doit+0x1cc/0x2a0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? cap_capable+0xd4/0x330 genl_rcv_msg+0x3ea/0x670 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? macsec_update_offload+0x820/0x820 netlink_rcv_skb+0x12b/0x390 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? netlink_ack+0xd80/0xd80 ? rwsem_down_read_slowpath+0xf90/0xf90 ? netlink_deliver_tap+0xcd/0xac0 ? netlink_deliver_tap+0x155/0xac0 ? _copy_from_iter+0x1bb/0x12c0 genl_rcv+0x24/0x40 netlink_unicast+0x440/0x700 ? netlink_attachskb+0x760/0x760 ? lock_acquire+0x1c2/0x530 ? __might_fault+0xbb/0x170 netlink_sendmsg+0x749/0xc10 ? netlink_unicast+0x700/0x700 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x700/0x700 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x53f/0x760 ? import_iovec+0x7/0x10 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x3c0/0x3c0 ? filter_irq_stacks+0x90/0x90 ? stack_depot_save_flags+0x28/0xa30 ___sys_sen ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: net: sierra: check for no status endpoint The driver checks for having three endpoints and having bulk in and out endpoints, but not that the third endpoint is interrupt input. Rectify the omission.

In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_qlen_notify() idempotent htb_qlen_notify() always deactivates the HTB class and in fact could trigger a warning if it is already deactivated. Therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) check sensor index in read_string() Prevent a potential invalid memory access when the requested sensor is not found. find_ec_sensor_index() may return a negative value (e.g. -ENOENT), but its result was used without checking, which could lead to undefined behavior when passed to get_sensor_info(). Add a proper check to return -EINVAL if sensor_index is negative. Found by Linux Verification Center (linuxtesting.org) with SVACE. [groeck: Return error code returned from find_ec_sensor_index]

In the Linux kernel, the following vulnerability has been resolved: usb: typec: displayport: Fix potential deadlock The deadlock can occur due to a recursive lock acquisition of `cros_typec_altmode_data::mutex`. The call chain is as follows: 1. cros_typec_altmode_work() acquires the mutex 2. typec_altmode_vdm() -> dp_altmode_vdm() -> 3. typec_altmode_exit() -> cros_typec_altmode_exit() 4. cros_typec_altmode_exit() attempts to acquire the mutex again To prevent this, defer the `typec_altmode_exit()` call by scheduling it rather than calling it directly from within the mutex-protected context.

In the Linux kernel, the following vulnerability has been resolved: btrfs: adjust subpage bit start based on sectorsize When running machines with 64k page size and a 16k nodesize we started seeing tree log corruption in production. This turned out to be because we were not writing out dirty blocks sometimes, so this in fact affects all metadata writes. When writing out a subpage EB we scan the subpage bitmap for a dirty range. If the range isn't dirty we do bit_start++; to move onto the next bit. The problem is the bitmap is based on the number of sectors that an EB has. So in this case, we have a 64k pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4 bits for every node. With a 64k page size we end up with 4 nodes per page. To make this easier this is how everything looks [0 16k 32k 48k ] logical address [0 4 8 12 ] radix tree offset [ 64k page ] folio [ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers [ | | | | | | | | | | | | | | | | ] bitmap Now we use all of our addressing based on fs_info->sectorsize_bits, so as you can see the above our 16k eb->start turns into radix entry 4. When we find a dirty range for our eb, we correctly do bit_start += sectors_per_node, because if we start at bit 0, the next bit for the next eb is 4, to correspond to eb->start 16k. However if our range is clean, we will do bit_start++, which will now put us offset from our radix tree entries. In our case, assume that the first time we check the bitmap the block is not dirty, we increment bit_start so now it == 1, and then we loop around and check again. This time it is dirty, and we go to find that start using the following equation start = folio_start + bit_start * fs_info->sectorsize; so in the case above, eb->start 0 is now dirty, and we calculate start as 0 + 1 * fs_info->sectorsize = 4096 4096 >> 12 = 1 Now we're looking up the radix tree for 1, and we won't find an eb. What's worse is now we're using bit_start == 1, so we do bit_start += sectors_per_node, which is now 5. If that eb is dirty we will run into the same thing, we will look at an offset that is not populated in the radix tree, and now we're skipping the writeout of dirty extent buffers. The best fix for this is to not use sectorsize_bits to address nodes, but that's a larger change. Since this is a fs corruption problem fix it simply by always using sectors_per_node to increment the start bit.

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: reject invalid perturb period Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0

In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Add NULL check in uclogic_input_configured() devm_kasprintf() returns NULL when memory allocation fails. Currently, uclogic_input_configured() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer The reproduction steps: 1. create a tun interface 2. enable l2 bearer 3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun tipc: Started in network mode tipc: Node identity 8af312d38a21, cluster identity 4711 tipc: Enabled bearer <eth:syz_tun>, priority 1 Oops: general protection fault KASAN: null-ptr-deref in range CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT Hardware name: QEMU Ubuntu 24.04 PC RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0 the ub was in fact a struct dev. when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or other media when other thread changes it. fix this by checking media_id.

In the Linux kernel, the following vulnerability has been resolved: Input: mtk-pmic-keys - fix possible null pointer dereference In mtk_pmic_keys_probe, the regs parameter is only set if the button is parsed in the device tree. However, on hardware where the button is left floating, that node will most likely be removed not to enable that input. In that case the code will try to dereference a null pointer. Let's use the regs struct instead as it is defined for all supported platforms. Note that it is ok setting the key reg even if that latter is disabled as the interrupt won't be enabled anyway.

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized data in insn_rw_emulate_bits() For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital" subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and `COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have `insn_read` and `insn_write` handler functions, but to have an `insn_bits` handler function for handling Comedi `INSN_BITS` instructions. In that case, the subdevice's `insn_read` and/or `insn_write` function handler pointers are set to point to the `insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`. For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the supplied `data[0]` value is a valid copy from user memory. It will at least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in "comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are allocated. However, if `insn->n` is 0 (which is allowable for `INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain uninitialized data, and certainly contains invalid data, possibly from a different instruction in the array of instructions handled by `do_insnlist_ioctl()`. This will result in an incorrect value being written to the digital output channel (or to the digital input/output channel if configured as an output), and may be reflected in the internal saved state of the channel. Fix it by returning 0 early if `insn->n` is 0, before reaching the code that accesses `data[0]`. Previously, the function always returned 1 on success, but it is supposed to be the number of data samples actually read or written up to `insn->n`, which is 0 in this case.

In the Linux kernel, the following vulnerability has been resolved: bcache: fix NULL pointer in cache_set_flush() 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net_sched: Flush gso_skb list too during ->change() Previously, when reducing a qdisc's limit via the ->change() operation, only the main skb queue was trimmed, potentially leaving packets in the gso_skb list. This could result in NULL pointer dereference when we only check sch->limit against sch->q.qlen. This patch introduces a new helper, qdisc_dequeue_internal(), which ensures both the gso_skb list and the main queue are properly flushed when trimming excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie) are updated to use this helper in their ->change() routines.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Refuse to evaluate a method if arguments are missing As reported in [1], a platform firmware update that increased the number of method parameters and forgot to update a least one of its callers, caused ACPICA to crash due to use-after-free. Since this a result of a clear AML issue that arguably cannot be fixed up by the interpreter (it cannot produce missing data out of thin air), address it by making ACPICA refuse to evaluate a method if the caller attempts to pass fewer arguments than expected to it.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix sample vs do_exit() Baisheng Gao reported an ARM64 crash, which Mark decoded as being a synchronous external abort -- most likely due to trying to access MMIO in bad ways. The crash further shows perf trying to do a user stack sample while in exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address space it is trying to access. It turns out that we stop perf after we tear down the userspace mm; a receipie for disaster, since perf likes to access userspace for various reasons. Flip this order by moving up where we stop perf in do_exit(). Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER to abort when the current task does not have an mm (exit_mm() makes sure to set current->mm = NULL; before commencing with the actual teardown). Such that CPU wide events don't trip on this same problem.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix crash in icl_update_topdown_event() The perf_fuzzer found a hard-lockup crash on a RaptorLake machine: Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000 CPU: 23 UID: 0 PID: 0 Comm: swapper/23 Tainted: [W]=WARN Hardware name: Dell Inc. Precision 9660/0VJ762 RIP: 0010:native_read_pmc+0x7/0x40 Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ... RSP: 000:fffb03100273de8 EFLAGS: 00010046 .... Call Trace: <TASK> icl_update_topdown_event+0x165/0x190 ? ktime_get+0x38/0xd0 intel_pmu_read_event+0xf9/0x210 __perf_event_read+0xf9/0x210 CPUs 16-23 are E-core CPUs that don't support the perf metrics feature. The icl_update_topdown_event() should not be invoked on these CPUs. It's a regression of commit: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") The bug introduced by that commit is that the is_topdown_event() function is mistakenly used to replace the is_topdown_count() call to check if the topdown functions for the perf metrics feature should be invoked. Fix it.

There are use-after-free vulnerabilities caused by timer handler in net/rose/rose_timer.c of linux that allow attackers to crash linux kernel without any privileges.

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Consistently treat platform_max as control value This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min"), and makes some additional related updates. There are two ways the platform_max could be interpreted; the maximum register value, or the maximum value the control can be set to. The patch moved from treating the value as a control value to a register one. When the patch was applied it was technically correct as snd_soc_limit_volume() also used the register interpretation. However, even then most of the other usages treated platform_max as a control value, and snd_soc_limit_volume() has since been updated to also do so in commit fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume"). That patch however, missed updating snd_soc_put_volsw() back to the control interpretation, and fixing snd_soc_info_volsw_range(). The control interpretation makes more sense as limiting is typically done from the machine driver, so it is appropriate to use the customer facing representation rather than the internal codec representation. Update all the code to consistently use this interpretation of platform_max. Finally, also add some comments to the soc_mixer_control struct to hopefully avoid further patches switching between the two approaches.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: jfs: Prevent copying of nlink with value 0 from disk inode syzbot report a deadlock in diFree. [1] When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated. When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree(). To avoid this, first check the nlink value of dinode before setting iag inode. [1] WARNING: possible recursive locking detected 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted -------------------------------------------- syz-executor301/5309 is trying to acquire lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 but task is already holding lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(imap->im_aglock[index])); lock(&(imap->im_aglock[index])); *** DEADLOCK *** May be due to missing lock nesting notation 5 locks held by syz-executor301/5309: #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669 stack backtrace: CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037 check_deadlock kernel/locking/lockdep.c:3089 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156 evict+0x4e8/0x9b0 fs/inode.c:725 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline] duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022 diNewIAG fs/jfs/jfs_imap.c:2597 [inline] diAllocExt fs/jfs/jfs_imap.c:1905 [inline] diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does not check for this case, which can result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix dereferencing invalid pmd migration entry When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ffffea60001db008 CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60 Call Trace: <TASK> try_to_migrate_one+0x28c/0x3730 rmap_walk_anon+0x4f6/0x770 unmap_folio+0x196/0x1f0 split_huge_page_to_list_to_order+0x9f6/0x1560 deferred_split_scan+0xac5/0x12a0 shrinker_debugfs_scan_write+0x376/0x470 full_proxy_write+0x15c/0x220 vfs_write+0x2fc/0xcb0 ksys_write+0x146/0x250 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug is found by syzkaller on an internal kernel, then confirmed on upstream.

In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs A malicious BPF program may manipulate the branch history to influence what the hardware speculates will happen next. On exit from a BPF program, emit the BHB mititgation sequence. This is only applied for 'classic' cBPF programs that are loaded by seccomp.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Annotate FDB data races The 'used' and 'updated' fields in the FDB entry structure can be accessed concurrently by multiple threads, leading to reports such as [1]. Can be reproduced using [2]. Suppress these reports by annotating these accesses using READ_ONCE() / WRITE_ONCE(). [1] BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0: vxlan_xmit+0xb29/0x2380 dev_hard_start_xmit+0x84/0x2f0 __dev_queue_xmit+0x45a/0x1650 packet_xmit+0x100/0x150 packet_sendmsg+0x2114/0x2ac0 __sys_sendto+0x318/0x330 __x64_sys_sendto+0x76/0x90 x64_sys_call+0x14e8/0x1c00 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2: vxlan_xmit+0xadf/0x2380 dev_hard_start_xmit+0x84/0x2f0 __dev_queue_xmit+0x45a/0x1650 packet_xmit+0x100/0x150 packet_sendmsg+0x2114/0x2ac0 __sys_sendto+0x318/0x330 __x64_sys_sendto+0x76/0x90 x64_sys_call+0x14e8/0x1c00 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f Reported by Kernel Concurrency Sanitizer on: CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [2] #!/bin/bash set +H echo whitelist > /sys/kernel/debug/kcsan echo !vxlan_xmit > /sys/kernel/debug/kcsan ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1 bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1 taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q & taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &

In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers between kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen Ridong: kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain ... wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active To avoid the false positives (mind panic_on_warn) remove the check altogether. (This is meant as quick fix, I think active reference break/unbreak may be simplified with larger rework.)

In the Linux kernel, the following vulnerability has been resolved: clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns What we want is to verify there is that clone won't expose something hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo" may be a result of MNT_LOCKED on a child, but it may also come from lacking admin rights in the userns of the namespace mount belongs to. clone_private_mnt() checks the former, but not the latter. There's a number of rather confusing CAP_SYS_ADMIN checks in various userns during the mount, especially with the new mount API; they serve different purposes and in case of clone_private_mnt() they usually, but not always end up covering the missing check mentioned above.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing P ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: don't free NULL coalescing rule If the parsing fails, we can dereference a NULL pointer here.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix incorrect list API usage Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets TCP_SYN_RECV state is really special, it is only used by cross-syn connections, mostly used by fuzzers. In the following crash [1], syzbot managed to trigger a divide by zero in tcp_rcv_space_adjust() A socket makes the following state transitions, without ever calling tcp_init_transfer(), meaning tcp_init_buffer_space() is also not called. TCP_CLOSE connect() TCP_SYN_SENT TCP_SYN_RECV shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN) TCP_FIN_WAIT1 To fix this issue, change tcp_shutdown() to not perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition, which makes no sense anyway. When tcp_rcv_state_process() later changes socket state from TCP_SYN_RECV to TCP_ESTABLISH, then look at sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state, and send a FIN packet from a sane socket state. This means tcp_send_fin() can now be called from BH context, and must use GFP_ATOMIC allocations. [1] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767 Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48 RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246 RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7 R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30 R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0 Call Trace: <TASK> tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513 tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578 inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7faeb6363db9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001