In the Linux kernel, the following vulnerability has been resolved: lib: cpu_rmap: Avoid use after free on rmap->obj array entries When calling irq_set_affinity_notifier() with NULL at the notify argument, it will cause freeing of the glue pointer in the corresponding array entry but will leave the pointer in the array. A subsequent call to free_irq_cpu_rmap() will try to free this entry again leading to possible use after free. Fix that by setting NULL to the array entry and checking that we have non-zero at the array entry when iterating over the array in free_irq_cpu_rmap(). The current code does not suffer from this since there are no cases where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the notify arg) is called, followed by a call to free_irq_cpu_rmap() so we don't hit and issue. Subsequent patches in this series excersize this flow, hence the required fix.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed.

The vmwgfx driver contains a local privilege escalation vulnerability that allows unprivileged users to gain access to files opened by other processes on the system through a dangling 'file' pointer.

In the Linux kernel, the following vulnerability has been resolved: blk-crypto: make blk_crypto_evict_key() more robust If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: davinci: Fix clk use after free The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used.

In the Linux kernel, the following vulnerability has been resolved: dax: Fix dax_mapping_release() use after free A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region provider (like modprobe -r dax_hmem) yields: kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000) [..] DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260 [..] RIP: 0010:__lock_acquire+0x9fc/0x2260 [..] Call Trace: <TASK> [..] lock_acquire+0xd4/0x2c0 ? ida_free+0x62/0x130 _raw_spin_lock_irqsave+0x47/0x70 ? ida_free+0x62/0x130 ida_free+0x62/0x130 dax_mapping_release+0x1f/0x30 device_release+0x36/0x90 kobject_delayed_cleanup+0x46/0x150 Due to attempting ida_free() on an ida object that has already been freed. Devices typically only hold a reference on their parent while registered. If a child needs a parent object to complete its release it needs to hold a reference that it drops from its release callback. Arrange for a dax_mapping to pin its parent dev_dax instance until dax_mapping_release().

In compose of Vibrator.cpp, there is a possible arbitrary code execution due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-228523213

In Media, there is a possible code execution due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-186473060

In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_open Commit 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set disk->private_data as NULL as before. UAF may be triggered in nbd_open() if someone tries to open nbd device right after nbd_put() since nbd has been free in nbd_dev_remove(). Fix this by implementing ->free_disk and free private data in it.

In binder_inc_ref_for_node of binder.c, there is a possible way to corrupt memory due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-239630375References: Upstream kernel

A use-after-free flaw was found in the Linux kernel’s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.

Linux Kernel could allow a local attacker to execute arbitrary code on the system, caused by a concurrency use-after-free flaw in the bad_flp_intr function. By executing a specially-crafted program, an attacker could exploit this vulnerability to execute arbitrary code or cause a denial of service condition on the system.

In the Linux kernel, the following vulnerability has been resolved: clk: microchip: fix potential UAF in auxdev release callback Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in adev_release()"), the auxiliary device is not torn down in the correct order. If auxiliary_device_add() fails, the release callback will be called twice, resulting in a UAF. Due to timing, the auxdev code in this driver "took inspiration" from the aforementioned commit, and thus its bugs too! Moving auxiliary_device_uninit() to the unregister callback instead avoids the issue.

In the Linux kernel, the following vulnerability has been resolved: net: caif: Fix use-after-free in cfusbl_device_notify() syzbot reported use-after-free in cfusbl_device_notify() [1]. This causes a stack trace like below: BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214 CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10227 [inline] netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> When unregistering a net device, unregister_netdevice_many_notify() sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers with NETDEV_UNREGISTER, and adds the device to the todo list. Later on, devices in the todo list are processed by netdev_run_todo(). netdev_run_todo() waits devices' reference count become 1 while rebdoadcasting NETDEV_UNREGISTER notification. When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple times, the parent device might be freed. This could cause UAF. Processing NETDEV_UNREGISTER multiple times also causes inbalance of reference count for the module. This patch fixes the issue by accepting only first NETDEV_UNREGISTER notification.

A use-after-free flaw was found in the Linux kernel’s io_uring subsystem in the way a user sets up a ring with IORING_SETUP_IOPOLL with more than one task completing submissions on this ring. This flaw allows a local user to crash or escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails If getting an ID or setting up a work queue in rbd_dev_create() fails, use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts is triggered in do_rbd_add(). The root cause is that the ownership of these structures is transfered to rbd_dev prematurely and they all end up getting freed when rbd_dev_create() calls rbd_dev_free() prior to returning to do_rbd_add(). Found by Linux Verification Center (linuxtesting.org) with SVACE, an incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.

In the Linux kernel, the following vulnerability has been resolved: media: netup_unidvb: fix use-after-free at del_timer() When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync().

In the Linux kernel, the following vulnerability has been resolved: drm/i915: mark requests for GuC virtual engines to avoid use-after-free References to i915_requests may be trapped by userspace inside a sync_file or dmabuf (dma-resv) and held indefinitely across different proceses. To counter-act the memory leaks, we try to not to keep references from the request past their completion. On the other side on fence release we need to know if rq->engine is valid and points to hw engine (true for non-virtual requests). To make it possible extra bit has been added to rq->execution_mask, for marking virtual engines. (cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580)

In the Linux kernel, the following vulnerability has been resolved: drm/tests: helpers: Avoid a driver uaf when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x7 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ip_vti: fix potential slab-use-after-free in decode_session6 When ip_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ip_vti device sends IPv6 packets. As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

When sending a socket event message to a user application, invalid information will be passed if socket is freed by other thread resulting in a Use After Free condition in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create We can't simply free the connector after calling drm_connector_init on it. We need to clean up the drm side first. It might not fix all regressions from commit 2b5d1c29f6c4 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"), but at least it fixes a memory corruption in error handling related to that commit.

In the Linux kernel, the following vulnerability has been resolved: inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:234 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm: bridge/panel: Cleanup connector on bridge detach If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests The FSM can run in a circle allowing rdma_resolve_ip() to be called twice on the same id_priv. While this cannot happen without going through the work, it violates the invariant that the same address resolution background request cannot be active twice. CPU 1 CPU 2 rdma_resolve_addr(): RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) #1 process_one_req(): for #1 addr_handler(): RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND mutex_unlock(&id_priv->handler_mutex); [.. handler still running ..] rdma_resolve_addr(): RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) !! two requests are now on the req_list rdma_destroy_id(): destroy_id_handler_unlock(): _destroy_id(): cma_cancel_operation(): rdma_addr_cancel() // process_one_req() self removes it spin_lock_bh(&lock); cancel_delayed_work(&req->work); if (!list_empty(&req->list)) == true ! rdma_addr_cancel() returns after process_on_req #1 is done kfree(id_priv) process_one_req(): for #2 addr_handler(): mutex_lock(&id_priv->handler_mutex); !! Use after free on id_priv rdma_addr_cancel() expects there to be one req on the list and only cancels the first one. The self-removal behavior of the work only happens after the handler has returned. This yields a situations where the req_list can have two reqs for the same "handle" but rdma_addr_cancel() only cancels the first one. The second req remains active beyond rdma_destroy_id() and will use-after-free id_priv once it inevitably triggers. Fix this by remembering if the id_priv has called rdma_resolve_ip() and always cancel before calling it again. This ensures the req_list never gets more than one item in it and doesn't cost anything in the normal flow that never uses this strange error path.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that.

In the Linux kernel, the following vulnerability has been resolved: ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl Hulk Robot reported a KASAN report about use-after-free: ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160 Read of size 8 at addr ffff888035e37d98 by task ubiattach/1385 [...] Call Trace: klist_dec_and_del+0xa7/0x4a0 klist_put+0xc7/0x1a0 device_del+0x4d4/0xed0 cdev_device_del+0x1a/0x80 ubi_attach_mtd_dev+0x2951/0x34b0 [ubi] ctrl_cdev_ioctl+0x286/0x2f0 [ubi] Allocated by task 1414: device_add+0x60a/0x18b0 cdev_device_add+0x103/0x170 ubi_create_volume+0x1118/0x1a10 [ubi] ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi] Freed by task 1385: cdev_device_del+0x1a/0x80 ubi_remove_volume+0x438/0x6c0 [ubi] ubi_cdev_ioctl+0xbf4/0x1ba0 [ubi] [...] ================================================================== The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be concurrent. ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach. ubi_detach is bug-free because it uses reference counting to prevent concurrency. However, uif_init and uif_close in ubi_attach may race with ubi_cdev_ioctl. uif_init will race with ubi_cdev_ioctl as in the following stack. cpu1 cpu2 cpu3 _______________________|________________________|______________________ ctrl_cdev_ioctl ubi_attach_mtd_dev uif_init ubi_cdev_ioctl ubi_create_volume cdev_device_add ubi_add_volume // sysfs exist kill_volumes ubi_cdev_ioctl ubi_remove_volume cdev_device_del // first free ubi_free_volume cdev_del // double free cdev_device_del And uif_close will race with ubi_cdev_ioctl as in the following stack. cpu1 cpu2 cpu3 _______________________|________________________|______________________ ctrl_cdev_ioctl ubi_attach_mtd_dev uif_init ubi_cdev_ioctl ubi_create_volume cdev_device_add ubi_debugfs_init_dev //error goto out_uif; uif_close kill_volumes ubi_cdev_ioctl ubi_remove_volume cdev_device_del // first free ubi_free_volume // double free The cause of this problem is that commit 714fb87e8bc0 make device "available" before it becomes accessible via sysfs. Therefore, we roll back the modification. We will fix the race condition between ubi device creation and udev by removing ubi_get_device in vol_attribute_show and dev_attribute_show.This avoids accessing uninitialized ubi_devices[ubi_num]. ubi_get_device is used to prevent devices from being deleted during sysfs execution. However, now kernfs ensures that devices will not be deleted before all reference counting are released. The key process is shown in the following stack. device_del device_remove_attrs device_remove_groups sysfs_remove_groups sysfs_remove_group remove_files kernfs_remove_by_name kernfs_remove_by_name_ns __kernfs_remove kernfs_drain

In the Linux kernel, the following vulnerability has been resolved: arch_topology: Avoid use-after-free for scale_freq_data Currently topology_scale_freq_tick() (which gets called from scheduler_tick()) may end up using a pointer to "struct scale_freq_data", which was previously cleared by topology_clear_scale_freq_source(), as there is no protection in place here. The users of topology_clear_scale_freq_source() though needs a guarantee that the previously cleared scale_freq_data isn't used anymore, so they can free the related resources. Since topology_scale_freq_tick() is called from scheduler tick, we don't want to add locking in there. Use the RCU update mechanism instead (which is already used by the scheduler's utilization update path) to guarantee race free updates here. synchronize_rcu() makes sure that all RCU critical sections that started before it is called, will finish before it returns. And so the callers of topology_clear_scale_freq_source() don't need to worry about their callback getting called anymore.

In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: fix use after free bugs After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: drm/prime: Fix use after free in mmap with drm_gem_ttm_mmap drm_gem_ttm_mmap() drops a reference to the gem object on success. If the gem object's refcount == 1 on entry to drm_gem_prime_mmap(), that drop will free the gem object, and the subsequent drm_gem_object_get() will be a UAF. Fix by grabbing a reference before calling the mmap helper. This issue was forseen when the reference dropping was adding in commit 9786b65bc61ac ("drm/ttm: fix mmap refcounting"): "For that to work properly the drm_gem_object_get() call in drm_gem_ttm_mmap() must be moved so it happens before calling obj->funcs->mmap(), otherwise the gem refcount would go down to zero."

In the Linux kernel, the following vulnerability has been resolved: cxl/acpi: Fix a use-after-free in cxl_parse_cfmws() KASAN and KFENCE detected an user-after-free in the CXL driver. This happens in the cxl_decoder_add() fail path. KASAN prints the following error: BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299) This happens in cxl_parse_cfmws(), where put_device() is called, releasing cxld, which is accessed later. Use the local variables in the dev_err() instead of pointing to the released memory. Since the dev_err() is printing a resource, change the open coded print format to use the %pr format specifier.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: call disconnect callback before deleting conn In hci_cs_disconnect, we do hci_conn_del even if disconnection failed. ISO, L2CAP and SCO connections refer to the hci_conn without hci_conn_get, so disconn_cfm must be called so they can clean up their conn, otherwise use-after-free occurs. ISO: ========================================================== iso_sock_connect:880: sk 00000000eabd6557 iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073 hci_dev_put:1487: hci0 orig refcnt 17 __iso_chan_add:214: conn 00000000b6251073 iso_sock_clear_timer:117: sock 00000000eabd6557 state 3 ... hci_rx_work:4085: hci0 Event packet hci_event_packet:7601: hci0: event 0x0f hci_cmd_status_evt:4346: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3107: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560 hci_conn_unlink:1102: hci0: hcon 000000001696f1fd hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2 hci_chan_list_flush:2780: hcon 000000001696f1fd hci_dev_put:1487: hci0 orig refcnt 21 hci_dev_put:1487: hci0 orig refcnt 20 hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c ... <no iso_* activity on sk/conn> ... iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557 BUG: kernel NULL pointer dereference, address: 0000000000000668 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth ========================================================== L2CAP: ================================================================== hci_cmd_status_evt:4359: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3085: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585 hci_conn_unlink:1102: hci0: hcon ffff88800c999000 hci_chan_list_flush:2780: hcon ffff88800c999000 hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280 ... BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth] Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175 CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0xf8/0x180 ? hci_send_acl+0x2d/0x540 [bluetooth] kasan_report+0xa8/0xe0 ? hci_send_acl+0x2d/0x540 [bluetooth] hci_send_acl+0x2d/0x540 [bluetooth] ? __pfx___lock_acquire+0x10/0x10 l2cap_chan_send+0x1fd/0x1300 [bluetooth] ? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth] ? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth] ? lock_release+0x1d5/0x3c0 ? mark_held_locks+0x1a/0x90 l2cap_sock_sendmsg+0x100/0x170 [bluetooth] sock_write_iter+0x275/0x280 ? __pfx_sock_write_iter+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 do_iter_readv_writev+0x176/0x220 ? __pfx_do_iter_readv_writev+0x10/0x10 ? find_held_lock+0x83/0xa0 ? selinux_file_permission+0x13e/0x210 do_iter_write+0xda/0x340 vfs_writev+0x1b4/0x400 ? __pfx_vfs_writev+0x10/0x10 ? __seccomp_filter+0x112/0x750 ? populate_seccomp_data+0x182/0x220 ? __fget_light+0xdf/0x100 ? do_writev+0x19d/0x210 do_writev+0x19d/0x210 ? __pfx_do_writev+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0x60/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 ? do_syscall_64+0x6c/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7ff45cb23e64 Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: sja1000: fix use after free in ems_pcmcia_add_card() If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up.

Windows Graphics Component Elevation of Privilege Vulnerability

In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential use-after-free in slab_debugfs_fops When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s because s will be freed soon. And slab_debugfs_fops will use s later leading to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU If allocating a new instance of an I/O bus fails when unregistering a device, wait to destroy the device until after all readers are guaranteed to see the new null bus. Destroying devices before the bus is nullified could lead to use-after-free since readers expect the devices on their reference of the bus to remain valid.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix use-after-free and memleak on unbind Deregister the port when unbinding the driver to prevent it from being used after releasing the driver data and leaking memory allocated by serial core.

In the Linux kernel, the following vulnerability has been resolved: igc: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igc_poll() runs while the controller is being reset this can lead to the driver try to free a skb that was already freed. Log message: [ 101.525242] refcount_t: underflow; use-after-free. [ 101.525251] WARNING: CPU: 1 PID: 646 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0 [ 101.525259] Modules linked in: sch_etf(E) sch_mqprio(E) rfkill(E) intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) binfmt_misc(E) kvm_intel(E) kvm(E) irqbypass(E) crc32_pclmul(E) ghash_clmulni_intel(E) aesni_intel(E) mei_wdt(E) libaes(E) crypto_simd(E) cryptd(E) glue_helper(E) snd_hda_codec_hdmi(E) rapl(E) intel_cstate(E) snd_hda_intel(E) snd_intel_dspcfg(E) sg(E) soundwire_intel(E) intel_uncore(E) at24(E) soundwire_generic_allocation(E) iTCO_wdt(E) soundwire_cadence(E) intel_pmc_bxt(E) serio_raw(E) snd_hda_codec(E) iTCO_vendor_support(E) watchdog(E) snd_hda_core(E) snd_hwdep(E) snd_soc_core(E) snd_compress(E) snd_pcsp(E) soundwire_bus(E) snd_pcm(E) evdev(E) snd_timer(E) mei_me(E) snd(E) soundcore(E) mei(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E) i915(E) ahci(E) libahci(E) ehci_pci(E) igb(E) xhci_pci(E) ehci_hcd(E) [ 101.525303] drm_kms_helper(E) dca(E) xhci_hcd(E) libata(E) crct10dif_pclmul(E) cec(E) crct10dif_common(E) tsn(E) igc(E) e1000e(E) ptp(E) i2c_i801(E) crc32c_intel(E) psmouse(E) i2c_algo_bit(E) i2c_smbus(E) scsi_mod(E) lpc_ich(E) pps_core(E) usbcore(E) drm(E) button(E) video(E) [ 101.525318] CPU: 1 PID: 646 Comm: irq/37-enp7s0-T Tainted: G E 5.10.30-rt37-tsn1-rt-ipipe #ipipe [ 101.525320] Hardware name: SIEMENS AG SIMATIC IPC427D/A5E31233588, BIOS V17.02.09 03/31/2017 [ 101.525322] RIP: 0010:refcount_warn_saturate+0xab/0xf0 [ 101.525325] Code: 05 31 48 44 01 01 e8 f0 c6 42 00 0f 0b c3 80 3d 1f 48 44 01 00 75 90 48 c7 c7 78 a8 f3 a6 c6 05 0f 48 44 01 01 e8 d1 c6 42 00 <0f> 0b c3 80 3d fe 47 44 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 a8 f3 [ 101.525327] RSP: 0018:ffffbdedc0917cb8 EFLAGS: 00010286 [ 101.525329] RAX: 0000000000000000 RBX: ffff98fd6becbf40 RCX: 0000000000000001 [ 101.525330] RDX: 0000000000000001 RSI: ffffffffa6f2700c RDI: 00000000ffffffff [ 101.525332] RBP: ffff98fd6becc14c R08: ffffffffa7463d00 R09: ffffbdedc0917c50 [ 101.525333] R10: ffffffffa74c3578 R11: 0000000000000034 R12: 00000000ffffff00 [ 101.525335] R13: ffff98fd6b0b1000 R14: 0000000000000039 R15: ffff98fd6be35c40 [ 101.525337] FS: 0000000000000000(0000) GS:ffff98fd6e240000(0000) knlGS:0000000000000000 [ 101.525339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.525341] CR2: 00007f34135a3a70 CR3: 0000000150210003 CR4: 00000000001706e0 [ 101.525343] Call Trace: [ 101.525346] sock_wfree+0x9c/0xa0 [ 101.525353] unix_destruct_scm+0x7b/0xa0 [ 101.525358] skb_release_head_state+0x40/0x90 [ 101.525362] skb_release_all+0xe/0x30 [ 101.525364] napi_consume_skb+0x57/0x160 [ 101.525367] igc_poll+0xb7/0xc80 [igc] [ 101.525376] ? sched_clock+0x5/0x10 [ 101.525381] ? sched_clock_cpu+0xe/0x100 [ 101.525385] net_rx_action+0x14c/0x410 [ 101.525388] __do_softirq+0xe9/0x2f4 [ 101.525391] __local_bh_enable_ip+0xe3/0x110 [ 101.525395] ? irq_finalize_oneshot.part.47+0xe0/0xe0 [ 101.525398] irq_forced_thread_fn+0x6a/0x80 [ 101.525401] irq_thread+0xe8/0x180 [ 101.525403] ? wake_threads_waitq+0x30/0x30 [ 101.525406] ? irq_thread_check_affinity+0xd0/0xd0 [ 101.525408] kthread+0x183/0x1a0 [ 101.525412] ? kthread_park+0x80/0x80 [ 101.525415] ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_restart: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.

In the Linux kernel, the following vulnerability has been resolved: staging: greybus: uart: fix tty use after free User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect.

In the Linux kernel, the following vulnerability has been resolved: igb: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igb_poll() runs while the controller is reset this can lead to the driver try to free a skb that was already freed. (The crash is harder to reproduce with the igb driver, but the same potential problem exists as the code is identical to igc)

In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect.

In the Linux kernel, the following vulnerability has been resolved: net: fddi: fix UAF in fza_probe fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. TURBOchannel adapter")

In the Linux kernel, the following vulnerability has been resolved: ACPI: custom_method: fix potential use-after-free issue In cm_write(), buf is always freed when reaching the end of the function. If the requested count is less than table.length, the allocated buffer will be freed but subsequent calls to cm_write() will still try to access it. Remove the unconditional kfree(buf) at the end of the function and set the buf to NULL in the -EINVAL error path to match the rest of function.

In the Linux kernel, the following vulnerability has been resolved: bpf: Track subprog poke descriptors correctly and fix use-after-free Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- */ u32 size_poke_tab; /* 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, a748c6975dea3 ("bpf: propagate poke des ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xen-netback: take a reference to the RX task thread Do this in order to prevent the task from being freed if the thread returns (which can be triggered by the frontend) before the call to kthread_stop done as part of the backend tear down. Not taking the reference will lead to a use-after-free in that scenario. Such reference was taken before but dropped as part of the rework done in 2ac061ce97f4. Reintroduce the reference taking and add a comment this time explaining why it's needed. This is XSA-374 / CVE-2021-28691.