The affected device stores sensitive information in cleartext, which may allow an authenticated user to access session data stored in the OAuth database belonging to legitimate users

The local iLabClient database in itech iLabClient 3.7.1 allows local attackers to read cleartext credentials (from the CONFIGS table) for their servers configured in the client.

KNIME Server before 4.12.6 and 4.13.x before 4.13.4 (when installed in unattended mode) keeps the administrator's password in a file without appropriate file access controls, allowing all local users to read its content.

The configuration file stores credentials in cleartext. An attacker with local access rights can read or modify the configuration file, potentially resulting in the service being abused due to sensitive information exposure.

A vulnerability was found in SICUNET Access Controller 0.32-05z. It has been declared as problematic. This vulnerability affects unknown code of the component Password Storage. The manipulation leads to weak encryption. Attacking locally is a requirement.

CloudForms stores user passwords in recoverable format

MELAG FTP Server 2.2.0.4 stores unencrpyted passwords of FTP users in a local configuration file.

A unprotected storage of credentials in Fortinet FortiSIEM Windows Agent version 4.1.4 and below allows an authenticated user to disclosure agent password due to plaintext credential storage in log files

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory.

IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.

An issue was discovered in WiZ Colors A60 1.14.0. API credentials are locally logged.

IBM Security Verify Bridge 1.0.5.0 stores user credentials in plain clear text which can be read by a locally authenticated user. IBM X-Force ID: 208154.

IBM MQ 7.5, 8.0, 9.0 LTS, 9.1 CD, and 9.1 LTS stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 211403.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a local attacker to obtain information due to the autocomplete feature on password input fields. IBM X-Force ID: 214345.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 213554.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 160987.

IBM Security Key Lifecycle Manager 3.0 and 3.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 166627.

Claws Mail vCalendar plugin: credentials exposed on interface

NCH Quorum v2.03 and earlier allows local users to discover cleartext login information relating to users by reading the local .dat configuration files.

IBM Cognos Analytics 11.2.0, 11.2.1, 11.2.2, 11.2.3, 11.2.4, 12.0.0, 12.0.1, 12.0.2, 12.0.3, and IBM Cognos Analytics Reports for iOS 11.0.0.7 could allow a local attacker to obtain sensitive information in the form of an API key. An attacker could use this information to launch further attacks against affected applications.

Plaintext vulnerability in the Gallery search module. Impact: Successful exploitation of this vulnerability will affect availability.

A flaw was found in openstack-tripleo-heat-templates. Plain passwords from RHSM exist in the logs during OSP13 deployment with subscription-manager.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.9 a form contains a password field with autocomplete enabled. The stored credentials can be captured by an attacker who gains control over the user's computer. Therefore the user must have logged in at least once.

A vulnerability in the CLI interface of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to read arbitrary files on the underlying file system of an affected system. This vulnerability exists because access to sensitive information on an affected system is not sufficiently controlled. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the web UI of an affected system.

Capturix ScanShare 1.06 build 50 stores sensitive information such as the password in cleartext in capturixss_cfg.ini, which is readable by local users.

A vulnerability in the CLI of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, local attacker to access sensitive information stored on the underlying file system of an affected system. This vulnerability exists because sensitive information is not sufficiently secured when it is stored. An attacker could exploit this vulnerability by gaining unauthorized access to sensitive information on an affected system. A successful exploit could allow the attacker to create forged authentication requests and gain unauthorized access to the affected system.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

GGLocker iOS application, contains an insecure data storage of the password hash value which results in an authentication bypass.

When the Windows Tentacle docker image starts up it logs all the commands that it runs along with the arguments, which writes the Octopus Server API key in plaintext. This does not affect the Linux Docker image

Users with appropriate file access may be able to access unencrypted user credentials saved by MongoDB Extension for VS Code in a binary file. These credentials may be used by malicious attackers to perform unauthorized actions. This vulnerability affects all MongoDB Extension for VS Code including and prior to version 0.7.0

Wowza Streaming Engine before 4.8.8.01 (in a default installation) has cleartext passwords stored in the conf/admin.password file. A regular local user is able to read usernames and passwords.

IBM Jazz for Service Management 1.1.3.10 and IBM Tivoli Netcool/OMNIbus_GUI displays user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 207610.

IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465.

TP-Link's TL-WPA4220 4.0.2 Build 20180308 Rel.37064 does not use SSL by default. Attacker on the local network can monitor traffic and capture the cookie and other sensitive information.

Tauri is a framework for building binaries for all major desktop platforms. This advisory is not describing a vulnerability in the Tauri code base itself but a commonly used misconfiguration which could lead to leaking of the private key and updater key password into bundled Tauri applications using the Vite frontend in a specific configuration. The Tauri documentation used an insecure example configuration in the `Vite guide` to showcase how to use Tauri together with Vite. Copying the following snippet `envPrefix: ['VITE_', 'TAURI_'],` from this guide into the `vite.config.ts` of a Tauri project leads to bundling the `TAURI_PRIVATE_KEY` and `TAURI_KEY_PASSWORD` into the Vite frontend code and therefore leaking this value to the released Tauri application. Using the `envPrefix: ['VITE_'],` or any other framework than Vite means you are not impacted by this advisory. Users are advised to rotate their updater private key if they are affected by this (requires Tauri CLI >=1.5.5). After updating the envPrefix configuration, generate a new private key with `tauri signer generate`, saving the new private key and updating the updater's `pubkey` value on `tauri.conf.json` with the new public key. To update your existing application, the next application build must be signed with the older private key in order to be accepted by the existing application.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow an authenticated user to print the Auth, Priv, and SSL key store passwords in unencrypted logs by manipulating command variables.

An issue was discovered in SmartFoxServer 2.17.0. Cleartext password disclosure can occur via /config/server.xml.

An issue was discovered in PRTG 7.x through 19.4.53. Due to insufficient access control on local registry keys for the Core Server Service, a non-administrative user on the local machine is able to access administrative credentials.

MySQL-GUI-tools (mysql-administrator) leaks passwords into process list after with launch of mysql text console

Microsoft Outlook plug-in PGP version 7.0, 7.0.3, and 7.0.4 silently saves a decrypted copy of a message to hard disk when "Automatically decrypt/verify when opening messages" option is checked, "Always use Secure Viewer when decrypting" option is not checked, and the user replies to an encrypted message.

An issue in Shenzen Tenda Technology CP3V2.0 V11.10.00.2311090948 allows a local attacker to obtain sensitive information via the password component.

An attacker with physical access to the host can extract the secrets from the registry and create valid JWT tokens for the Fresenius Kabi Vigilant MasterMed version 2.0.1.3 application and impersonate arbitrary users. An attacker could manipulate RabbitMQ queues and messages by impersonating users.

IBM Storage Defender - Resiliency Service 2.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 278748.

IBM UrbanCode Deploy (UCD) 7.0.4.0 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 171250.

A vulnerability in the storage method of the PON Controller configuration file could allow an authenticated, local attacker with low privileges to obtain the MongoDB credentials. This vulnerability is due to improper storage of the unencrypted database credentials on the device that is running Cisco IOS XR Software. An attacker could exploit this vulnerability by accessing the configuration files on an affected system. A successful exploit could allow the attacker to view MongoDB credentials.

A vulnerability in the logging component of Cisco Duo Authentication for Windows Logon and RDP could allow an authenticated, local attacker to view sensitive information in clear text on an affected system. This vulnerability is due to improper storage of an unencrypted registry key in certain logs. An attacker could exploit this vulnerability by accessing the logs on an affected system. A successful exploit could allow the attacker to view sensitive information in clear text.

A vulnerability in the web-based management interface of Cisco ATA 190 Series Multiplatform Analog Telephone Adapter firmware could allow an authenticated, local attacker with low privileges to view passwords on an affected device. This vulnerability is due to incorrect sanitization of HTML content from an affected device. A successful exploit could allow the attacker to view passwords that belong to other users.

In Versa Director, Versa Analytics and VOS, Passwords are not hashed using an adaptive cryptographic hash function or key derivation function prior to storage. Popular hashing algorithms based on the Merkle-Damgardconstruction (such as MD5 and SHA-1) alone are insufficient in thwarting password cracking. Attackers can generate and use precomputed hashes for all possible password character combinations (commonly referred to as "rainbow tables") relatively quickly. The use of adaptive hashing algorithms such asscryptorbcryptor Key-Derivation Functions (i.e.PBKDF2) to hash passwords make generation of such rainbow tables computationally infeasible.

A vulnerability in the installer software of Cisco ThousandEyes Recorder could allow an unauthenticated, local attacker to access sensitive information that is contained in the ThousandEyes Recorder installer software. This vulnerability exists because sensitive information is included in the application installer. An attacker could exploit this vulnerability by downloading the installer and extracting its contents. A successful exploit could allow the attacker to access sensitive information that is included in the application installer.