<p>An information disclosure vulnerability exists in Remote Desktop Protocol (RDP) when an attacker connects to the target system using RDP and sends specially crafted requests. An attacker who successfully exploited this vulnerability could obtain information to further compromise the user’s system.</p> <p>To exploit this vulnerability, an attacker would need to run a specially crafted application against a server which provides Remote Desktop Protocol (RDP) services.</p> <p>The update addresses the vulnerability by correcting how RDP handles connection requests.</p>

Microsoft Outlook Information Disclosure Vulnerability

Microsoft Protected Extensible Authentication Protocol (PEAP) Information Disclosure Vulnerability

An issue was discovered in VirtoSoftware Virto Bulk File Download 5.5.44 for SharePoint 2019. The Virto.SharePoint.FileDownloader/Api/Download.ashx isCompleted method allows an NTLMv2 hash leak via a UNC share pathname in the path parameter.

A flaw was found in the Linux kernel's implementation of some networking protocols in IPsec, such as VXLAN and GENEVE tunnels over IPv6. When an encrypted tunnel is created between two hosts, the kernel isn't correctly routing tunneled data over the encrypted link; rather sending the data unencrypted. This would allow anyone in between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

IBM QRadar Network Packet Capture 7.5 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 289858.

IBM Security Verify Access Appliance 10.0.0 through 10.0.7 contains hard-coded credentials which it uses for its own inbound authentication that could be obtained by a malicious actor. IBM X-Force ID: 287317.

Microsoft Raw Image Extension Information Disclosure Vulnerability

IBM i 7.2, 7.3, and 7.4 could allow a remote attacker to execute arbitrary code leading to a denial of service of network ports on the system, caused by the deserialization of untrusted data. IBM X-Force ID: 287539.

IBM OpenBMC FW1050.00 through FW1050.10 BMCWeb HTTPS server component could disclose sensitive URI content to an unauthorized actor that bypasses authentication channels. IBM X-ForceID: 290026.

Use of uninitialized resource in SQL Server allows an unauthorized attacker to disclose information over a network.

The current implementation of the prctl syscall does not issue an IBPB immediately during the syscall. The ib_prctl_set  function updates the Thread Information Flags (TIFs) for the task and updates the SPEC_CTRL MSR on the function __speculation_ctrl_update, but the IBPB is only issued on the next schedule, when the TIF bits are checked. This leaves the victim vulnerable to values already injected on the BTB, prior to the prctl syscall.  The patch that added the support for the conditional mitigation via prctl (ib_prctl_set) dates back to the kernel 4.9.176. We recommend upgrading past commit a664ec9158eeddd75121d39c9a0758016097fa96

IBM Security Verify Privilege 11.6.25 could allow an unauthenticated actor to obtain sensitive information from the SOAP API. IBM X-Force ID: 287651.

Telemetry Dashboard v1.0.0.8 for Dell ThinOS 2402 contains a sensitive information disclosure vulnerability. An unauthenticated user with local access to the device could exploit this vulnerability leading to information disclosure.

3CX before 18 Update 2 Security Hotfix build 18.0.2.315 on Windows allows unauthenticated remote attackers to read certain files via /Electron/download directory traversal. Files may have credentials, full backups, call recordings, and chat logs.

Microsoft SharePoint Server Information Disclosure Vulnerability

.NET Framework Information Disclosure Vulnerability

IBM QRadar Suite Software 1.10.12.0 through 1.10.23.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 displays sensitive data improperly to a local privileged user, in non default configurations, during back-end commands which may result in the unexpected disclosure of this information. IBM X-Force ID: 287173.

IBM Security Directory Integrator 7.2.0 and IBM Security Verify Directory Integrator 10.0.0 could disclose sensitive information about directory contents that could aid in further attacks against the system.

Sensitive information disclosure and manipulation due to improper certification validation. The following products are affected: Acronis Agent (Windows, macOS, Linux) before build 29633, Acronis Cyber Protect 15 (Windows, macOS, Linux) before build 30984.

Sensitive information disclosure and manipulation due to improper certification validation. The following products are affected: Acronis Agent (Windows) before build 29633, Acronis Cyber Protect 15 (Windows) before build 30984.

Sensitive information disclosure due to insecure folder permissions. The following products are affected: Acronis Agent (Windows) before build 30161, Acronis Cyber Protect 15 (Windows) before build 30984.

IBM Db2 for Linux, UNIX and Windows 10.5, 11.1, and 11.5 is vulnerable to information Disclosure due to improper privilege management when a specially crafted table access is used. IBM X-Force ID: 241671.

IBM Security Guardium 11.3 and 11.4 could disclose sensitive information to an attacker due to improper restriction of excessive authentication attempts. IBM X-Force ID: 240895.

IBM Business Automation Workflow 22.0.2 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 239427.

IBM Db2 for Linux, UNIX and Windows 10.5, 11.1, and 11.5 is vulnerable to an Information Disclosure as sensitive information may be included in a log file. IBM X-Force ID: 241677.

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix refcnt handling in __inet_hash_connect(). syzbot reported a warning in sk_nulls_del_node_init_rcu(). The commit 66b60b0c8c4a ("dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().") tried to fix an issue that an unconnected socket occupies an ehash entry when bhash2 allocation fails. In such a case, we need to revert changes done by check_established(), which does not hold refcnt when inserting socket into ehash. So, to revert the change, we need to __sk_nulls_add_node_rcu() instead of sk_nulls_add_node_rcu(). Otherwise, sock_put() will cause refcnt underflow and leak the socket. [0]: WARNING: CPU: 0 PID: 23948 at include/net/sock.h:799 sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799 Modules linked in: CPU: 0 PID: 23948 Comm: syz-executor.2 Not tainted 6.8.0-rc6-syzkaller-00159-gc055fc00c07b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799 Code: e8 7f 71 c6 f7 83 fb 02 7c 25 e8 35 6d c6 f7 4d 85 f6 0f 95 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 1b 6d c6 f7 90 <0f> 0b 90 eb b2 e8 10 6d c6 f7 4c 89 e7 be 04 00 00 00 e8 63 e7 d2 RSP: 0018:ffffc900032d7848 EFLAGS: 00010246 RAX: ffffffff89cd0035 RBX: 0000000000000001 RCX: 0000000000040000 RDX: ffffc90004de1000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 1ffff1100439ac26 R08: ffffffff89ccffe3 R09: 1ffff1100439ac28 R10: dffffc0000000000 R11: ffffed100439ac29 R12: ffff888021cd6140 R13: dffffc0000000000 R14: ffff88802a9bf5c0 R15: ffff888021cd6130 FS: 00007f3b823f16c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3b823f0ff8 CR3: 000000004674a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __inet_hash_connect+0x140f/0x20b0 net/ipv4/inet_hashtables.c:1139 dccp_v6_connect+0xcb9/0x1480 net/dccp/ipv6.c:956 __inet_stream_connect+0x262/0xf30 net/ipv4/af_inet.c:678 inet_stream_connect+0x65/0xa0 net/ipv4/af_inet.c:749 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f3b8167dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3b823f10c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f3b817abf80 RCX: 00007f3b8167dda9 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007f3b823f1120 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f3b817abf80 R15: 00007ffd3beb57b8 </TASK>

IBM Guardium Data Protection could allow a remote attacker to obtain sensitive information due to cleartext transmission of sensitive credential information.

IBM Maximo Asset Management 7.6.1.2 and 7.6.1.3 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 237587.

Outlook for Android Information Disclosure Vulnerability

A path traversal vulnerability exists in filepath.Clean on Windows. On Windows, the filepath.Clean function could transform an invalid path such as "a/../c:/b" into the valid path "c:\b". This transformation of a relative (if invalid) path into an absolute path could enable a directory traversal attack. After fix, the filepath.Clean function transforms this path into the relative (but still invalid) path ".\c:\b".

On Windows, restricted files can be accessed via os.DirFS and http.Dir. The os.DirFS function and http.Dir type provide access to a tree of files rooted at a given directory. These functions permit access to Windows device files under that root. For example, os.DirFS("C:/tmp").Open("COM1") opens the COM1 device. Both os.DirFS and http.Dir only provide read-only filesystem access. In addition, on Windows, an os.DirFS for the directory (the root of the current drive) can permit a maliciously crafted path to escape from the drive and access any path on the system. With fix applied, the behavior of os.DirFS("") has changed. Previously, an empty root was treated equivalently to "/", so os.DirFS("").Open("tmp") would open the path "/tmp". This now returns an error.

GeoServer is an open source server that allows users to share and edit geospatial data. Prior to versions 2.23.5 and 2.24.3, if GeoServer is deployed in the Windows operating system using an Apache Tomcat web application server, it is possible to bypass existing input validation in the GeoWebCache ByteStreamController class and read arbitrary classpath resources with specific file name extensions. If GeoServer is also deployed as a web archive using the data directory embedded in the `geoserver.war` file (rather than an external data directory), it will likely be possible to read specific resources to gain administrator privileges. However, it is very unlikely that production environments will be using the embedded data directory since, depending on how GeoServer is deployed, it will be erased and re-installed (which would also reset to the default password) either every time the server restarts or every time a new GeoServer WAR is installed and is therefore difficult to maintain. An external data directory will always be used if GeoServer is running in standalone mode (via an installer or a binary). Versions 2.23.5 and 2.24.3 contain a patch for the issue. Some workarounds are available. One may change from a Windows environment to a Linux environment; or change from Apache Tomcat to Jetty application server. One may also disable anonymous access to the embeded GeoWebCache administration and status pages.

In Octopus Server after version 2022.1.1495 and before 2022.1.2647 if private spaces were enabled via the experimental feature flag all new users would have access to the Script Console within their private space.

Versions of IBM Spectrum Protect Plus prior to 10.1.12 (excluding 10.1.12) include the private key information for a certificate inside the generated .crt file when uploading a TLS certificate to IBM Spectrum Protect Plus. If this generated .crt file is shared, an attacker can obtain the private key information for the uploaded certificate. IBM X-Force ID: 235718.

A use-after-free vulnerability in SVG Animation has been discovered. An exploit built on this vulnerability has been discovered in the wild targeting Firefox and Tor Browser users on Windows. This vulnerability affects Firefox < 50.0.2, Firefox ESR < 45.5.1, and Thunderbird < 45.5.1.

Adobe ColdFusion Builder versions 2016 update 2 and earlier, 3.0.3 and earlier have an important vulnerability that could lead to information disclosure.

A vulnerability in Trend Micro Apex One and Apex One as a Service could allow an attacker to intercept and decode certain communication strings that may contain some identification attributes of a particular Apex One server.

IBM Spectrum Protect Plus 10.1.6 through 10.1.11 Microsoft File Systems restore operation can download any file on the target machine by manipulating the URL with a directory traversal attack. This results in the restore operation gaining access to files which the operator should not have access to. IBM X-Force ID: 235873.

IBM Robotic Process Automation Clients are vulnerable to proxy credentials being exposed in upgrade logs. IBM X-Force ID: 235422.

Hertz v0.3.0 ws discovered to contain a path traversal vulnerability via the normalizePath function.

IBM Spectrum Virtualize 8.5, 8.4, 8.3, 8.2, and 7.8, under certain configurations, could disclose sensitive information to an attacker using man-in-the-middle techniques. IBM X-Force ID: 235408.

IBM Maximo Application Suite 8.10 and 8.11 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 279950.

IBM DevOps Velocity 5.0.0 and IBM UrbanCode Velocity 4.0.0 through 4.0. 25 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains.

Web Account Manager Information Disclosure Vulnerability

IBM Security Verify Governance 10.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts.

IBM QRadar Suite Products 1.10.12.0 through 1.10.18.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 280781.

IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 280400.

.NET Spoofing Vulnerability

IBM Security Verify Information Queue 10.0.2 could disclose sensitive information due to a missing or insecure SameSite attribute for a sensitive cookie. IBM X-Force ID: 230811.