Ruckus through 1.5.1.0.21 is affected by remote command injection. An authenticated user can submit a query to the API (/service/v1/createUser endpoint), injecting arbitrary commands that will be executed as root user via web.py.

An issue was discovered on Gemtek WRTM-127ACN 01.01.02.141 and WRTM-127x9 01.01.02.127 devices. The Monitor Diagnostic network page allows an authenticated attacker to execute a command directly on the target machine. Commands are executed as the root user (uid 0). (Even if a login is required, most routers are left with default credentials.)

The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

Nagios XI 5.7.2 is affected by a remote code execution (RCE) vulnerability. An authenticated user can inject additional commands into normal webapp query.

Zyxel VMG5313-B30B router on firmware 5.13(ABCJ.6)b3_1127, and possibly older versions of firmware are affected by shell injection.

UCOPIA Wi-Fi appliances 6.0.5 allow authenticated remote attackers to escape the restricted administration shell CLI, and access a shell with admin user rights, via an unprotected less command.

httpd on TP-Link TL-WPA4220 devices (versions 2 through 4) allows remote authenticated users to execute arbitrary OS commands by sending crafted POST requests to the endpoint /admin/powerline. Fixed version: TL-WPA4220(EU)_V4_201023

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

IBM Security Guardium 11.1 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 174735.

Jenkins CryptoMove Plugin 0.1.33 and earlier allows attackers with Job/Configure access to execute arbitrary OS commands on the Jenkins master as the OS user account running Jenkins.

Jenkins Selection tasks Plugin 1.0 and earlier executes a user-specified program on the Jenkins controller, allowing attackers with Job/Configure permission to execute an arbitrary system command on the Jenkins controller as the OS user that the Jenkins process is running as.

Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script.

Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

An authenticated command injection vulnerability in Weintek cMT2078X easyweb Web Version v2.1.3, OS v20220215 allows attackers to execute arbitrary code or access sensitive information via injecting a crafted payload into the HMI Name parameter.

A command injection vulnerability was discovered on the Zyxel EMG2926 home router with firmware V1.00(AAQT.4)b8. The vulnerability is located in the diagnostic tools, specifically the nslookup function. A malicious user may exploit numerous vectors to execute arbitrary commands on the router, such as the ping_ip parameter to the expert/maintenance/diagnostic/nslookup URI.

Shanghai Feixun Data Communication Technology Co., Ltd router fir302b A2 was discovered to contain a remote command execution (RCE) vulnerability via the Ping function.

Artica Web Proxy 4.30.000000 allows an authenticated remote attacker to inject commands via the service-cmds parameter in cyrus.php. These commands are executed with root privileges via service_cmds_peform.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

Apache Kylin 2.3.0, and releases up to 2.6.5 and 3.0.1 has some restful apis which will concatenate os command with the user input string, a user is likely to be able to execute any os command without any protection or validation.

An OS Command Injection vulnerability in PAN-OS management server allows authenticated users to inject and execute arbitrary shell commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

A format string vulnerability was identified in SMM/SMM2 and FPC that could allow an authenticated user to execute arbitrary commands on a specific API endpoint.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 allows attacker to execute unauthorized code or commands via specifically crafted http get request parameters

Authenticated user can execute arbitrary commands in the context of the root user by providing payload in the "destination" field of the network test tools. This is similar to the vulnerability CVE-2021-28151 mitigated on the user interface level by blacklisting characters with JavaScript, however, it can still be exploited by sending POST requests directly.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

An OS command injection vulnerability has been found to affect legacy QNAP VioStor NVR models running QVR Firmware 4.x. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QVR Firmware 5.0.0 and later

IBM Security Guardium 11.3, 11.4, 11.5, and 12.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 271524.

An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

File-Manager in MGT CloudPanel 2.0.0 through 2.3.2 allows the lowest privilege user to achieve OS command injection by changing file ownership and changing file permissions to 4755.

Centreon before 19.04.15 allows remote attackers to execute arbitrary OS commands by placing shell metacharacters in RRDdatabase_status_path (via a main.get.php request) and then visiting the include/views/graphs/graphStatus/displayServiceStatus.php page.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the iw_webs functionality. A specially crafted diagnostic script file name can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

A remote command injection vulnerability exists in the Barracuda Load Balancer product line (confirmed on v5.4.0.004 (2015-11-26) and v6.0.1.006 (2016-08-19); fixed in 6.1.0.003 (2017-01-17)) in which an authenticated user can execute arbitrary shell commands and gain root privileges. The vulnerability stems from unsanitized data being processed in a system call when the delete_assessment command is issued.

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator with permissions to use XML API the ability to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. This issue does not impact Prisma Access firewalls.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

The api/zrDm/set_zrDm interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the dm_enable, AppKey, or Pwd parameter.

Dell DM5500 contains a privilege escalation vulnerability in the appliance. A remote attacker with low privileges could potentially exploit this vulnerability to escape the restricted shell and gain root access to the appliance.

An issue in YeaLinkSIP-T19P-E2 v.53.84.0.15 allows a remote privileged attacker to execute arbitrary code via a crafted request the ping function of the diagnostic component.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

OCS Inventory NG 2.7 allows Remote Command Execution via shell metacharacters to require/commandLine/CommandLine.php because mib_file in plugins/main_sections/ms_config/ms_snmp_config.php is mishandled in get_mib_oid.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.