An exploitable denial of service vulnerability exists in the ENIP Request Path Data Segment functionality of Allen-Bradley Flex IO 1794-AENT/B. A specially crafted network request can cause a loss of communications with the device resulting in denial-of-service. An attacker can send a malicious packet to trigger this vulnerability If the ANSI Extended Symbol Segment Sub-Type is supplied, the device treats the byte following as the Data Size in words. When this value represents a size greater than what remains in the packet data, the device enters a fault state where communication with the device is lost and a physical power cycle is required.

A flaw in Apache libapreq2 versions 2.16 and earlier could cause a buffer overflow while processing multipart form uploads. A remote attacker could send a request causing a process crash which could lead to a denial of service attack.

engine.c in slaacd in OpenBSD 6.9 and 7.0 before 2022-02-21 has a buffer overflow triggerable by an IPv6 router advertisement with more than seven nameservers. NOTE: privilege separation and pledge can prevent exploitation.

Buffer Overflow vulnerability in free5gc 3.3.0 allows attackers to cause a denial of service via crafted PFCP message with malformed PFCP Heartbeat message whose Recovery Time Stamp IE length is mutated to zero.

In Memcached before 1.6.22, a buffer overflow exists when processing multiget requests in proxy mode, if there are many spaces after the "get" substring.

IOWOW is a C utility library and persistent key/value storage engine. Versions 1.4.15 and prior contain a stack buffer overflow vulnerability that allows for Denial of Service (DOS) when it parses scientific notation numbers present in JSON. A patch for this issue is available at commit a79d31e4cff1d5a08f665574b29fd885897a28fd in the `master` branch of the repository. There are no workarounds other than applying the patch.

Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 22.2.0, Twisted SSH client and server implement is able to accept an infinite amount of data for the peer's SSH version identifier. This ends up with a buffer using all the available memory. The attach is a simple as `nc -rv localhost 22 < /dev/zero`. A patch is available in version 22.2.0. There are currently no known workarounds.

A Buffer Overflow vulnerability in the PFE of Juniper Networks Junos OS on SRX series allows an unauthenticated network based attacker to cause a Denial of Service (DoS). The PFE will crash when specific traffic is scanned by Enhanced Web Filtering safe-search feature of UTM (Unified Threat management). Continued receipt of this specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: 20.2 versions prior to 20.2R3-S4 on SRX Series; 20.3 versions prior to 20.3R3-S3 on SRX Series; 20.4 versions prior to 20.4R3-S3 on SRX Series; 21.1 versions prior to 21.1R3-S1 on SRX Series; 21.2 versions prior to 21.2R2-S2, 21.2R3 on SRX Series; 21.3 versions prior to 21.3R2 on SRX Series; 21.4 versions prior to 21.4R2 on SRX Series. This issue does not affect Juniper Networks Junos OS versions prior to 20.2R1.

Buffer Overflow in the "sixel_encoder_encode_bytes" function of Libsixel v1.8.6 allows attackers to cause a Denial of Service (DoS).

A vulnerability was found in TOTOLINK A702R, A3002R, A3002RU and EX1200T 3.0.0-B20230809.1615/4.0.0-B20230531.1404/4.0.0-B20230721.1521/4.1.2cu.5232_B20210713. It has been classified as critical. Affected is an unknown function of the file /boafrm/formIPv6Addr of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.

Buffer overflow in NetRxPkt::ehdr_buf in hw/net/net_rx_pkt.c in QEMU (aka Quick Emulator), when the VLANSTRIP feature is enabled on the vmxnet3 device, allows remote attackers to cause a denial of service (out-of-bounds access and QEMU process crash) via vectors related to VLAN stripping.

A vulnerability exists in the HCI Modbus TCP function included in the product versions listed above. If the HCI Modbus TCP is enabled and configured, an attacker could exploit the vulnerability by sending a specially crafted message to the RTU500 in a high rate, causing the targeted RTU500 CMU to reboot. The vulnerability is caused by a lack of flood control which eventually if exploited causes an internal stack overflow in the HCI Modbus TCP function.

Buffer Overflow vulnerability in free5gc 3.3.0 allows attackers to cause a denial of service via crafted PFCP messages whose Sequence Number is mutated to overflow bytes.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT (All versions < V5.5.2), SCALANCE X201-3P IRT PRO (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2IRT (All versions < V5.5.2), SCALANCE X202-2P IRT (All versions < V5.5.2), SCALANCE X202-2P IRT PRO (All versions < V5.5.2), SCALANCE X204-2 (All versions < V5.2.6), SCALANCE X204-2FM (All versions < V5.2.6), SCALANCE X204-2LD (All versions < V5.2.6), SCALANCE X204-2LD TS (All versions < V5.2.6), SCALANCE X204-2TS (All versions < V5.2.6), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT (All versions < V5.5.2), SCALANCE X204IRT PRO (All versions < V5.5.2), SCALANCE X206-1 (All versions < V5.2.6), SCALANCE X206-1LD (All versions < V5.2.6), SCALANCE X208 (All versions < V5.2.6), SCALANCE X208PRO (All versions < V5.2.6), SCALANCE X212-2 (All versions < V5.2.6), SCALANCE X212-2LD (All versions < V5.2.6), SCALANCE X216 (All versions < V5.2.6), SCALANCE X224 (All versions < V5.2.6), SCALANCE XF201-3P IRT (All versions < V5.5.2), SCALANCE XF202-2P IRT (All versions < V5.5.2), SCALANCE XF204 (All versions < V5.2.6), SCALANCE XF204-2 (All versions < V5.2.6), SCALANCE XF204-2BA IRT (All versions < V5.5.2), SCALANCE XF204IRT (All versions < V5.5.2), SCALANCE XF206-1 (All versions < V5.2.6), SCALANCE XF208 (All versions < V5.2.6). Affected devices do not properly validate the URI of incoming HTTP GET requests. This could allow an unauthenticated remote attacker to crash affected devices.

Buffer Overflow vulnerability in /apply.cgi in Shenzhen Libituo Technology Co., Ltd LBT-T300-T310 v2.2.2.6 allows attackers to cause a denial of service via the ApCliAuthMode parameter.

Buffer Overflow vulnerability in free5gc 3.3.0, UPF 1.2.0, and SMF 1.2.0 allows attackers to cause a denial of service via crafted PFCP messages.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

An issue was discovered in Stormshield Network Security (SNS) SNS 4.3.13 through 4.3.22 before 4.3.23, SNS 4.6.0 through 4.6.9 before 4.6.10, and SNS 4.7.0 through 4.7.1 before 4.7.2. An attacker can overflow the cookie threshold, making an IPsec connection impossible.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the saveParentControlInfo function via the deviceName parameter.

There is a vulnerability in DHCPv6 packet parsing code that could be explored by remote attacker to craft a packet that could cause buffer overflow in a memcpy call, leading to out-of-bounds memory write that would cause dhcp6relay to crash. Dhcp6relay is a critical process and could cause dhcp relay docker to shutdown. Discovered by Eugene Lim of GovTech Singapore.

Column handling crashes in Wireshark 4.4.0 to 4.4.6 and 4.2.0 to 4.2.12 allows denial of service via packet injection or crafted capture file

hutool v5.8.21 was discovered to contain a buffer overflow via the component JSONUtil.parse().

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

MiniWeb HTTP server 0.8.19 allows remote attackers to cause a denial of service (daemon crash) via a long name for the first parameter in a POST request.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromAdvSetMacMtuWan function via the serverName parameter.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

Squid is vulnerable to a Denial of Service, where a remote attacker can perform buffer overflow attack by writing up to 2 MB of arbitrary data to heap memory when Squid is configured to accept HTTP Digest Authentication.

ASUS AC68U <=3.0.0.4.385.20852 is affected by a buffer overflow in blocking.cgi, which may cause a denial of service (DoS).

An issue was discovered in WinAPRS 2.9.0. A buffer overflow in DIGI address processing for VHF KISS packets allows a remote attacker to cause a denial of service (daemon crash) via a malicious AX.25 packet over the air. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

Accu-Time Systems MAXIMUS 1.0 telnet service suffers from a remote buffer overflow which causes the telnet service to crash

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

PJSIP is a free and open source multimedia communication library written in C. Versions 2.12 and prior contain a stack buffer overflow vulnerability that affects PJSUA2 users or users that call the API `pjmedia_sdp_print(), pjmedia_sdp_media_print()`. Applications that do not use PJSUA2 and do not directly call `pjmedia_sdp_print()` or `pjmedia_sdp_media_print()` should not be affected. A patch is available on the `master` branch of the `pjsip/pjproject` GitHub repository. There are currently no known workarounds.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromSetSysTime function via the ntpServer parameter.

An issue was discovered in YottaDB through r1.32 and V7.0-000 and FIS GT.M through V7.0-000. Using crafted input, an attacker can cause a call to $Extract to force an signed integer holding the size of a buffer to take on a large negative number, which is then used as the length of a memcpy call that occurs on the stack, causing a buffer overflow.

A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp and 4004/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.

Serva 4.4.0 allows remote attackers to cause a denial of service (daemon crash) via a TFTP read (RRQ) request, aka opcode 1, a related issue to CVE-2013-0145.

Netis N3Mv2-V1.0.1.865 was discovered to contain a buffer overflow via the servDomain parameter. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A Buffer Overflow vulnerability in Tenda AC500 v.2.0.1.9 allows a remote attacker to cause a denial of service via the port parameter at the goform/setVlanInfo component.

Netis N3Mv2-V1.0.1.865 was discovered to contain a buffer overflow via the hostName parameter in the FUN_0040dabc function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Buffer Overflow vulnerability found in En3rgy WebcamServer v.0.5.2 allows a remote attacker to cause a denial of service via the WebcamServer.exe file.

Netis N3Mv2-V1.0.1.865 was discovered to contain a buffer overflow via the pingWdogIp. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Buffer Overflow vulnerability in msoulier tftpy commit 467017b844bf6e31745138a30e2509145b0c529c allows a remote attacker to cause a denial of service via the parse function in the TftpPacketFactory class.

Buffer Overflow vulnerability in osrg gobgp commit 419c50dfac578daa4d11256904d0dc182f1a9b22 allows a remote attacker to cause a denial of service via the handlingError function in pkg/server/fsm.go.

A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.