An issue was discovered on Samsung mobile devices with M(6.0) and N(7.x) software. There is a buffer overflow in tlc_server. The Samsung ID is SVE-2017-8888 (July 2017).
A remote buffer overflow vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x: 6.5.4.16 and below; Aruba Instant 8.3.x: 8.3.0.12 and below; Aruba Instant 8.5.x: 8.5.0.6 and below; Aruba Instant 8.6.x: 8.6.0.2 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.
In ACCEL-PPP (an implementation of PPTP/PPPoE/L2TP/SSTP), there is a buffer overflow when receiving an l2tp control packet ith an AVP which type is a string and no hidden flags, length set to less than 6. If your application is used in open networks or there are untrusted nodes in the network it is highly recommended to apply the patch. The problem was patched with commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b As a workaround changes of commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b can be applied to older versions.
Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.54, EX7000 before 1.0.1.94, EX7500 before 1.0.0.72, R6250 before 1.0.4.48, R6300v2 before 1.0.4.52, R6400 before 1.0.1.70, R6400v2 before 1.0.4.102, R6700v3 before 1.0.4.102, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7850 before 1.0.5.68, R7900 before 1.0.4.30, R7960P before 1.4.1.68, R8000 before 1.0.4.52, RAX200 before 1.0.2.88, RBS40V before 2.6.2.4, RS400 before 1.5.1.80, XR300 before 1.0.3.56, R7000P before 1.3.2.124, R8000P before 1.4.1.68, R8500 before 1.0.2.144, RAX80 before 1.0.3.102, R6900P before 1.3.2.124, R7900P before 1.4.1.68, R8300 before 1.0.2.144, RAX75 before 1.0.3.102, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, and RBK852 before 3.2.17.12.
Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.city.vlan parameter in the function setIptvInfo.
On SRX Series devices configured with UTM services a buffer overflow vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS may allow an attacker to arbitrarily execute code or commands on the target to take over or otherwise impact the device by sending crafted packets to or through the device. This issue affects: Juniper Networks Junos OS on SRX Series: 15.1X49 versions prior to 15.1X49-D190; 17.4 versions prior to 17.4R2-S9; 17.4R3 and later versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R3-S1; 18.3 versions prior to 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2; 19.2 versions prior to 19.2R1-S1, 19.2R2. An indicator of compromise can be the following text in the UTM log: RT_UTM: AV_FILE_NOT_SCANNED_PASSED_MT:
Buffer overflow vulnerability has been identified in Lexmark devices through 2021-12-07 in postscript interpreter.
An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a resource certificate containing a Key Usage extension composed of more than two bytes of data. Fort writes this string into a 2-byte buffer without properly sanitizing its length, leading to a buffer overflow.
xfig 3.2.7 is vulnerable to Buffer Overflow.
An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/openSchedWifi schedStartTime and schedEndTime parameters for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.
A Buffer Overflow vulnerability exists in the Message Server service _MsJ2EE_AddStatistics() function when sending specially crafted SAP Message Server packets to remote TCP ports 36NN and/or 39NN in SAP NetWeaver 2004s, 7.01 SR1, 7.02 SP06, and 7.30 SP04, which could let a remote malicious user execute arbitrary code.
A Buffer Overflow vulnerability exists in Vivotek PT7135 IP Camera 0300a and 0400a via a specially crafted packet in the Authorization header field sent to the RTSP service, which could let a remote malicious user execute arbitrary code or cause a Denial of Service.
In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
termpkg 3.3 suffers from buffer overflow.
A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6250 before 1.0.4.48, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7900 before 1.0.4.38, R8300 before 1.0.2.144, R8500 before 1.0.2.144, XR300 before 1.0.3.68, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.
Certain HP Enterprise LaserJet, HP LaserJet Managed, HP Enterprise PageWide, HP PageWide Managed products may be vulnerable to potential buffer overflow.
In TRENDnet TEW-752DRU FW1.03B01, there is a buffer overflow vulnerability due to the lack of length verification for the service field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.
Dell EMC iDRAC6 versions prior to 2.92, iDRAC7/iDRAC8 versions prior to 2.61.60.60, and iDRAC9 versions prior to 3.20.21.20, 3.21.24.22, 3.21.26.22 and 3.23.23.23 contain a stack-based buffer overflow vulnerability. An unauthenticated remote attacker may potentially exploit this vulnerability to crash the webserver or execute arbitrary code on the system with privileges of the webserver by sending specially crafted input data to the affected system.
A Buffer Overflow vulnerabilityexists in Pev 0.81 via the pe_exports function from exports.c.. The array offsets_to_Names is dynamically allocated on the stack using exp->NumberOfFunctions as its size. However, the loop uses exp->NumberOfNames to iterate over it and set its components value. Therefore, the loop code assumes that exp->NumberOfFunctions is greater than ordinal at each iteration. This can lead to arbitrary code execution.
perM 0.4.0 has a Buffer Overflow related to strncpy. (Debian initially fixed this in 0.4.0-7.)
PX4-Autopilot provides PX4 flight control solution for drones. In versions 1.14.0-rc1 and prior, PX4-Autopilot has a heap buffer overflow vulnerability in the parser function due to the absence of `parserbuf_index` value checking. A malfunction of the sensor device can cause a heap buffer overflow with leading unexpected drone behavior. Malicious applications can exploit the vulnerability even if device sensor malfunction does not occur. Up to the maximum value of an `unsigned int`, bytes sized data can be written to the heap memory area. As of time of publication, no fixed version is available.
TOTOLINK A3002R v4.0.0-B20230531.1404 contains a buffer overflow vulnerability in /bin/boa via formParentControl.
Go before 1.16.9 and 1.17.x before 1.17.2 has a Buffer Overflow via large arguments in a function invocation from a WASM module, when GOARCH=wasm GOOS=js is used.
A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later
TOTOLINK A3700R v9.1.2u.5822_B20200513 has a buffer overflow vulnerability in the http_host parameter in the loginauth function.
Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution.
TOTOLINK A3100R V4.1.2cu.5050_B20200504 has a buffer overflow vulnerability in the password parameter in the loginauth function.
slpd-lite is a unicast SLP UDP server. Any OpenBMC system that includes the slpd-lite package is impacted. Installing this package is the default when building OpenBMC. Nefarious users can send slp packets to the BMC using UDP port 427 to cause memory overflow issues within the slpd-lite daemon on the BMC. Patches will be available in the latest openbmc/slpd-lite repository.
Buffer Overflow vulnerability in Ayukov NFTPD 2.0 and earlier allows remote attackers to execute arbitrary code.
A remote buffer overflow vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 8.7.x.x: 8.7.0.0 through 8.7.1.2. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.
There is a buffer overflow in gps-sdr-sim v1.0 when parsing long command line parameters, which can lead to DoS or code execution.
TOTOLINK A3100R V4.1.2cu.5050_B20200504 has a buffer overflow vulnerability in the http_host parameter in the loginauth function.
A buffer overflow issue was discovered in HMI3 Control Panel in Swisslog Healthcare Nexus Panel operated by released versions of software before Nexus Software 7.2.5.7. When a message is sent to the HMI TCP socket, it is forwarded to the hmiProcessMsg function through the pendingQ, and may lead to remote code execution.
A buffer overflow in D-Link DIR-615 C2 3.03WW. The ping_ipaddr parameter in ping_response.cgi POST request allows an attacker to crash the webserver and might even gain remote code execution.
PingCAP TiDB v8.1.0 was discovered to contain a buffer overflow via the component expression.ExplainExpressionList. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. NOTE: PingCAP maintains that the actual reproduction of this issue did not cause the security impact of service interruption to other users. They argue that this is a complex query bug and not a DoS vulnerability.
open5gs v2.6.4 is vulnerable to Buffer Overflow. via /lib/core/abts.c.
A buffer overflow issue was discovered in the HMI3 Control Panel contained within the Swisslog Healthcare Nexus Panel, operated by released versions of software before Nexus Software 7.2.5.7. A buffer overflow allows an attacker to overwrite an internal queue data structure and can lead to remote code execution.
A stack overflow in FAST FW300R v1.3.13 Build 141023 Rel.61347n allows attackers to execute arbitrary code or cause a Denial of Service (DoS) via a crafted file path.
Buffer Overflow vulnerability in btstack mesh commit before v.864e2f2b6b7878c8fab3cf5ee84ae566e3380c58 allows a remote attacker to execute arbitrary code via the pb_adv_handle_tranaction_cont function in the src/mesh/pb_adv.c component
Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the mitInterface parameter in ip/goform/RouteStatic
A vulnerability regarding buffer copy without checking size of input ('Classic Buffer Overflow') is found in the libjansson component and it does not affect the upstream library. This allows remote attackers to execute arbitrary code via unspecified vectors. The following models with Synology Camera Firmware versions before 1.0.7-0298 may be affected: BC500 and TC500.
An issue was discovered in Digi RealPort for Windows through 4.8.488.0. A buffer overflow exists in the handling of ADDP discovery response messages. This could result in arbitrary code execution.
Buffer Overflow vulnerability LINKSYS EA7500 3.0.1.207964 allows a remote attacker to execute arbitrary code via an HTTP request to the IGD UPnP.
Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a buffer overflow via the nav2_amcl process. This vulnerability is triggered via sending a crafted .yaml file.
TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via the password parameter in function loginAuth .
TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid5g in the function setWizardCfg.
TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiBasicCfg
In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char).
Multiple buffer overflows in Eudora Worldmail, possibly Worldmail 3 version 6.1.22.0, have unknown impact and attack vectors, as demonstrated by the (1) "Eudora WorldMail stack overflow" and (2) "Eudora WorldMail heap overflow" modules in VulnDisco Pack. NOTE: Some of these details are obtained from third party information. As of 20061118, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes.