Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

An issue was discovered on Rittal PDU-3C002DEC through 5.15.40 and CMCIII-PU-9333E0FB through 3.15.70_4 devices. Attackers can execute code.

An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable.

DKIM key management page vulnerability on Micro Focus Secure Messaging Gateway (SMG). Affecting all SMG Appliance running releases prior to July 2020. The vulnerability could allow a logged in user with rights to generate DKIM key information to inject system commands into the call to the DKIM system command.

Certain TP-Link devices allow Command Injection. This affects NC200 2.1.9 build 200225, NC210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.

Comtrend VR-3033 DE11-416SSG-C01_R02.A2pvI042j1.d26m devices have Multiple Authenticated Command Injection vulnerabilities via the ping and traceroute diagnostic pages, as demonstrated by shell metacharacters in the pingIpAddress parameter to ping.cgi.

Vesta Control Panel (VestaCP) through 0.9.8-26 allows Command Injection via the schedule/backup Backup Listing Endpoint. The attacker must be able to create a crafted filename on the server, as demonstrated by an FTP session that renames .bash_logout to a .bash_logout' substring followed by shell metacharacters.

An issue was discovered in Froxlor before 0.10.14. Remote attackers with access to the installation routine could have executed arbitrary code via the database configuration options that were passed unescaped to exec, because of _backupExistingDatabase in install/lib/class.FroxlorInstall.php.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An attacker with authenticated access to VICIdial as an "agent" can execute arbitrary shell commands as the "root" user. This attack can be chained with CVE-2024-8503 to execute arbitrary shell commands starting from an unauthenticated perspective.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

WebAccess/NMS (versions prior to 3.0.2) does not properly sanitize user input and may allow an attacker to inject system commands remotely.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

lib/ajaxHandlers/ajaxAddTemplate.php in rConfig through 3.94 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the fileName POST parameter.

Arista NG Firewall ExecManagerImpl Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Arista NG Firewall. Authentication is required to exploit this vulnerability. The specific flaw exists within the ExecManagerImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24015.

Vesta Control Panel (VestaCP) 0.9.7 through 0.9.8-23 is vulnerable to an authenticated command execution that can result in remote root access on the server. The platform works with PHP as the frontend language and uses shell scripts to execute system actions. PHP executes shell script through the dangerous command exec. This function can be dangerous if arguments passed to it are not filtered. Every user input in VestaCP that is used as an argument is filtered with the escapeshellarg function. This function comes from the PHP library directly and its description is as follows: "escapeshellarg() adds single quotes around a string and quotes/escapes any existing single quotes allowing you to pass a string directly to a shell function and having it be treated as a single safe argument." It means that if you give Username, it will have 'Username' as a replacement. This works well and protects users from exploiting this potentially dangerous exec function. Unfortunately, VestaCP uses this escapeshellarg function incorrectly in several places.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

Webmin CGI Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Webmin. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of CGI requests. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22346.

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "sHour" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "pass" parameter in setVpnAccountCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "sMinute" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "eHour" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "user" parameter in setVpnAccountCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "minute" parameters in setScheduleCfg.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

Administrative Management System from Wellchoose has an OS Command Injection vulnerability, allowing remote attackers with regular privileges to inject and execute arbitrary OS commands.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.

A remote command injection vulnerability exists in the Barracuda Load Balancer product line (confirmed on v5.4.0.004 (2015-11-26) and v6.0.1.006 (2016-08-19); fixed in 6.1.0.003 (2017-01-17)) in which an authenticated user can execute arbitrary shell commands and gain root privileges. The vulnerability stems from unsanitized data being processed in a system call when the delete_assessment command is issued.

Maxprint Maxlink 1200G v3.4.11E has an OS command injection vulnerability in the "Diagnostic tool" functionality of the device.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

An exploitable command injection vulnerability exists in the iwwebs functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted diagnostic script file name can cause user input to be reflected in a subsequent iwsystem call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

Missing input validation and OS command integration of the input in the ORing IAP-420 web-interface allows authenticated command injection.This issue affects IAP-420 version 2.01e and below.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/usb_restore_Form?script/.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in Rakuten Turbo 5G firmware version V1.3.18 and earlier. If this vulnerability is exploited, a remote authenticated attacker may execute an arbitrary OS command.

A vulnerability has been found in ajenti 2.1.31 and classified as critical. This vulnerability affects unknown code of the component API. The manipulation leads to privilege escalation. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.32 is able to address this issue. The name of the patch is 7aa146b724e0e20cfee2c71ca78fafbf53a8767c. It is recommended to upgrade the affected component.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in FortiSOAR IMAP connector version 3.5.7 and below may allow an authenticated attacker to execute unauthorized code or commands via a specifically crafted playbook

Ruckus through 1.5.1.0.21 is affected by remote command injection. An authenticated user can submit a query to the API (/service/v1/createUser endpoint), injecting arbitrary commands that will be executed as root user via web.py.

netflow_get_stats in functions_netflow.php in Pandora FMS 7.0NG allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ip_src parameter in an index.php?operation/netflow/nf_live_view request. This issue has been fixed in Pandora FMS 7.0 NG 742.

Verizon 5G Home LVSKIHP OutDoorUnit (ODU) 3.33.101.0 does not property sanitize user-controlled parameters within the DMACC URLs on the Settings page of the Engineering portal. An authenticated remote attacker on the local network can inject shell metacharacters into /usr/lib/lua/5.1/luci/controller/admin/settings.lua to achieve remote code execution as root.

A low-privileged remote attacker could exploit the vulnerability and inject additional system commands via file system libraries which could give the attacker full control of the device.

On certain TOTOLINK Realtek SDK based routers, an authenticated attacker may execute arbitrary OS commands via the sysCmd parameter to the boafrm/formSysCmd URI, even if the GUI (syscmd.htm) is not available. This allows for full control over the device's internals. This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, N100RE through 3.4.0, and N302RE 2.0.2.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to admin_account.cgi.

This vulnerability allows authenticated attackers to execute commands via the NTP-configuration of the device.