In the Linux kernel, the following vulnerability has been resolved: IB/core: Implement a limit on UMAD receive List The existing behavior of ib_umad, which maintains received MAD packets in an unbounded list, poses a risk of uncontrolled growth. As user-space applications extract packets from this list, the rate of extraction may not match the rate of incoming packets, leading to potential list overflow. To address this, we introduce a limit to the size of the list. After considering typical scenarios, such as OpenSM processing, which can handle approximately 100k packets per second, and the 1-second retry timeout for most packets, we set the list size limit to 200k. Packets received beyond this limit are dropped, assuming they are likely timed out by the time they are handled by user-space. Notably, packets queued on the receive list due to reasons like timed-out sends are preserved even when the list is full.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix possible double free in error handling path When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files Use strnlen() instead of strlen() on the algorithm and coefficient name string arrays in V1 wmfw files. In V1 wmfw files the name is a NUL-terminated string in a fixed-size array. cs_dsp should protect against overrunning the array if the NUL terminator is missing.

In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param() Syzkaller reports a null-ptr-deref bug as follows: ====================================================== KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380 [...] Call Trace: <TASK> vfs_parse_fs_param fs/fs_context.c:148 [inline] vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129 vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191 generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231 do_new_mount fs/namespace.c:3036 [inline] path_mount+0x12de/0x1e20 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> ====================================================== According to commit "vfs: parse: deal with zero length string value", kernel will set the param->string to null pointer in vfs_parse_fs_string() if fs string has zero length. Yet the problem is that, hugetlbfs_parse_param() will dereference the param->string, without checking whether it is a null pointer. To be more specific, if hugetlbfs_parse_param() parses an illegal mount parameter, such as "size=,", kernel will constructs struct fs_parameter with null pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug. This patch solves it by adding sanity check on param->string in hugetlbfs_parse_param().

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix Rx DMA datasize and skb_over_panic mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be multiple of 64. So a packet slightly bigger than mtu+14, say 1536, can be received and cause skb_over_panic. Sample dmesg: [ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL> [ 5325.243689] ------------[ cut here ]------------ [ 5325.245748] kernel BUG at net/core/skbuff.c:192! [ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60 [ 5325.302941] Call Trace: [ 5325.304389] <IRQ> [ 5325.315794] ? skb_panic+0x4f/0x60 [ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30 [ 5325.319490] ? skb_panic+0x4f/0x60 [ 5325.321161] skb_put+0x4e/0x50 [ 5325.322670] mana_poll+0x6fa/0xb50 [mana] [ 5325.324578] __napi_poll+0x33/0x1e0 [ 5325.326328] net_rx_action+0x12e/0x280 As discussed internally, this alignment is not necessary. To fix this bug, remove it from the code. So oversized packets will be marked as CQE_RX_TRUNCATED by NIC, and dropped.

In Linux 2.6 before 2.6.23, the TRACE_IRQS_ON function in iret_exc calls a C function without ensuring that the segments are set properly. The kernel's %fs needs to be restored before the call in TRACE_IRQS_ON and before enabling interrupts, so that "current" references work. Without this, "current" used in the window between iret_exc and the middle of error_code where %fs is reset, would crash.

In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid negative index with array access Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") assigns prev_idata = idatas[i - 1], but doesn't check that the iterator i is greater than zero. Let's fix this by adding a check.

In the Linux kernel, the following vulnerability has been resolved: x86: stop playing stack games in profile_pc() The 'profile_pc()' function is used for timer-based profiling, which isn't really all that relevant any more to begin with, but it also ends up making assumptions based on the stack layout that aren't necessarily valid. Basically, the code tries to account the time spent in spinlocks to the caller rather than the spinlock, and while I support that as a concept, it's not worth the code complexity or the KASAN warnings when no serious profiling is done using timers anyway these days. And the code really does depend on stack layout that is only true in the simplest of cases. We've lost the comment at some point (I think when the 32-bit and 64-bit code was unified), but it used to say: Assume the lock function has either no stack frame or a copy of eflags from PUSHF. which explains why it just blindly loads a word or two straight off the stack pointer and then takes a minimal look at the values to just check if they might be eflags or the return pc: Eflags always has bits 22 and up cleared unlike kernel addresses but that basic stack layout assumption assumes that there isn't any lock debugging etc going on that would complicate the code and cause a stack frame. It causes KASAN unhappiness reported for years by syzkaller [1] and others [2]. With no real practical reason for this any more, just remove the code. Just for historical interest, here's some background commits relating to this code from 2006: 0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels") 31679f38d886 ("Simplify profile_pc on x86-64") and a code unification from 2009: ef4512882dbe ("x86: time_32/64.c unify profile_pc") but the basics of this thing actually goes back to before the git tree.

In the Linux kernel before 5.16.3, drivers/scsi/ufs/ufs-mediatek.c misinterprets the regulator_get return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable().

In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix GUP-fast succeeding on secretmem folios folio_is_secretmem() currently relies on secretmem folios being LRU folios, to save some cycles. However, folios might reside in a folio batch without the LRU flag set, or temporarily have their LRU flag cleared. Consequently, the LRU flag is unreliable for this purpose. In particular, this is the case when secretmem_fault() allocates a fresh page and calls filemap_add_folio()->folio_add_lru(). The folio might be added to the per-cpu folio batch and won't get the LRU flag set until the batch was drained using e.g., lru_add_drain(). Consequently, folio_is_secretmem() might not detect secretmem folios and GUP-fast can succeed in grabbing a secretmem folio, crashing the kernel when we would later try reading/writing to the folio, because the folio has been unmapped from the directmap. Fix it by removing that unreliable check.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_clear_cmd racing issue When ufshcd_clear_cmd is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by the ISR. And ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE. Return success when the request is completed by ISR because sq does not need cleanup. The racing flow is: Thread A ufshcd_err_handler step 1 ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_clear_cmd ... ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace: ufshcd_try_to_abort_task: cmd pending in the device. tag = 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise] Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise] Call trace: dump_backtrace+0xf8/0x148 show_stack+0x18/0x24 dump_stack_lvl+0x60/0x7c dump_stack+0x18/0x3c mrdump_common_die+0x24c/0x398 [mrdump] ipanic_die+0x20/0x34 [mrdump] notify_die+0x80/0xd8 die+0x94/0x2b8 __do_kernel_fault+0x264/0x298 do_page_fault+0xa4/0x4b8 do_translation_fault+0x38/0x54 do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise] ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise] ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: drm/lima: fix a memleak in lima_heap_alloc When lima_vm_map_bo fails, the resources need to be deallocated, or there will be memleaks.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix XDP program unloading while removing the driver The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks.

In the Linux kernel, the following vulnerability has been resolved: jffs2: Fix potential illegal address access in jffs2_free_inode During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once.

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix overflow check in io_recvmsg_mshot_prep() The "controllen" variable is type size_t (unsigned long). Casting it to int could lead to an integer underflow. The check_add_overflow() function considers the type of the destination which is type int. If we add two positive values and the result cannot fit in an integer then that's counted as an overflow. However, if we cast "controllen" to an int and it turns negative, then negative values *can* fit into an int type so there is no overflow. Good: 100 + (unsigned long)-4 = 96 <-- overflow Bad: 100 + (int)-4 = 96 <-- no overflow I deleted the cast of the sizeof() as well. That's not a bug but the cast is unnecessary.

In the Linux kernel, the following vulnerability has been resolved: xdp: Remove WARN() from __xdp_reg_mem_model() syzkaller reports a warning in __xdp_reg_mem_model(). The warning occurs only if __mem_id_init_hash_table() returns an error. It returns the error in two cases: 1. memory allocation fails; 2. rhashtable_init() fails when some fields of rhashtable_params struct are not initialized properly. The second case cannot happen since there is a static const rhashtable_params struct with valid fields. So, warning is only triggered when there is a problem with memory allocation. Thus, there is no sense in using WARN() to handle this error and it can be safely removed. WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299 Call Trace: xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344 xdp_test_run_setup net/bpf/test_run.c:188 [inline] bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377 bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267 bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240 __sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649 __do_sys_bpf kernel/bpf/syscall.c:5738 [inline] __se_sys_bpf kernel/bpf/syscall.c:5736 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Found by Linux Verification Center (linuxtesting.org) with syzkaller.

cbq_classify in net/sched/sch_cbq.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service (slab-out-of-bounds read) because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).

In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2 KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr() ip6_dst_idev() can return NULL, xfrm6_get_saddr() must act accordingly. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 12 Comm: kworker/u8:1 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker RIP: 0010:xfrm6_get_saddr+0x93/0x130 net/ipv6/xfrm6_policy.c:64 Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 97 00 00 00 4c 8b ab d8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 86 00 00 00 4d 8b 6d 00 e8 ca 13 47 01 48 b8 00 RSP: 0018:ffffc90000117378 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88807b079dc0 RCX: ffffffff89a0d6d7 RDX: 0000000000000000 RSI: ffffffff89a0d6e9 RDI: ffff88807b079e98 RBP: ffff88807ad73248 R08: 0000000000000007 R09: fffffffffffff000 R10: ffff88807b079dc0 R11: 0000000000000007 R12: ffffc90000117480 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4586d00440 CR3: 0000000079042000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> xfrm_get_saddr net/xfrm/xfrm_policy.c:2452 [inline] xfrm_tmpl_resolve_one net/xfrm/xfrm_policy.c:2481 [inline] xfrm_tmpl_resolve+0xa26/0xf10 net/xfrm/xfrm_policy.c:2541 xfrm_resolve_and_create_bundle+0x140/0x2570 net/xfrm/xfrm_policy.c:2835 xfrm_bundle_lookup net/xfrm/xfrm_policy.c:3070 [inline] xfrm_lookup_with_ifid+0x4d1/0x1e60 net/xfrm/xfrm_policy.c:3201 xfrm_lookup net/xfrm/xfrm_policy.c:3298 [inline] xfrm_lookup_route+0x3b/0x200 net/xfrm/xfrm_policy.c:3309 ip6_dst_lookup_flow+0x15c/0x1d0 net/ipv6/ip6_output.c:1256 send6+0x611/0xd20 drivers/net/wireguard/socket.c:139 wg_socket_send_skb_to_peer+0xf9/0x220 drivers/net/wireguard/socket.c:178 wg_socket_send_buffer_to_peer+0x12b/0x190 drivers/net/wireguard/socket.c:200 wg_packet_send_handshake_initiation+0x227/0x360 drivers/net/wireguard/send.c:40 wg_packet_handshake_send_worker+0x1c/0x30 drivers/net/wireguard/send.c:51 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount imbalance on inbound connections When releasing a socket in ax25_release(), we call netdev_put() to decrease the refcount on the associated ax.25 device. However, the execution path for accepting an incoming connection never calls netdev_hold(). This imbalance leads to refcount errors, and ultimately to kernel crashes. A typical call trace for the above situation will start with one of the following errors: refcount_t: decrement hit 0; leaking memory. refcount_t: underflow; use-after-free. And will then have a trace like: Call Trace: <TASK> ? show_regs+0x64/0x70 ? __warn+0x83/0x120 ? refcount_warn_saturate+0xb2/0x100 ? report_bug+0x158/0x190 ? prb_read_valid+0x20/0x30 ? handle_bug+0x3e/0x70 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xb2/0x100 ? refcount_warn_saturate+0xb2/0x100 ax25_release+0x2ad/0x360 __sock_release+0x35/0xa0 sock_close+0x19/0x20 [...] On reboot (or any attempt to remove the interface), the kernel gets stuck in an infinite loop: unregister_netdevice: waiting for ax0 to become free. Usage count = 0 This patch corrects these issues by ensuring that we call netdev_hold() and ax25_dev_hold() for new connections in ax25_accept(). This makes the logic leading to ax25_accept() match the logic for ax25_bind(): in both cases we increment the refcount, which is ultimately decremented in ax25_release().

In the Linux kernel, the following vulnerability has been resolved: spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe In function pci1xxxx_spi_probe, there is a potential null pointer that may be caused by a failed memory allocation by the function devm_kzalloc. Hence, a null pointer check needs to be added to prevent null pointer dereferencing later in the code. To fix this issue, spi_bus->spi_int[iter] should be checked. The memory allocated by devm_kzalloc will be automatically released, so just directly return -ENOMEM without worrying about memory leaks.

In the Linux kernel, the following vulnerability has been resolved: tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx' When generate a synthetic event with many params and then create a trace action for it [1], kernel panic happened [2]. It is because that in trace_action_create() 'data->n_params' is up to SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx' keeps indices into array 'hist_data->var_refs' for each synthetic event param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX (current value is 16), so out-of-bound write happened when 'data->n_params' more than 16. In this case, 'data->match_data.event' is overwritten and eventually cause the panic. To solve the issue, adjust the length of 'data->var_ref_idx' to be SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write. [1] # cd /sys/kernel/tracing/ # echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\ int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\ int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\ int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\ int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\ int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\ int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\ int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\ int v63" >> synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \ events/sched/sched_waking/trigger # echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger [2] BUG: unable to handle page fault for address: ffff91c900000000 PGD 61001067 P4D 61001067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:strcmp+0xc/0x30 Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3 RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000 RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000 R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580 R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538 FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0 Call Trace: <TASK> __find_event_file+0x55/0x90 action_create+0x76c/0x1060 event_hist_trigger_parse+0x146d/0x2060 ? event_trigger_write+0x31/0xd0 trigger_process_regex+0xbb/0x110 event_trigger_write+0x6b/0xd0 vfs_write+0xc8/0x3e0 ? alloc_fd+0xc0/0x160 ? preempt_count_add+0x4d/0xa0 ? preempt_count_add+0x70/0xa0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1d1d0cf077 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077 RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001 RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142 R ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix the lifetime of the bo cursor memory The cleanup can be dispatched while the atomic update is still active, which means that the memory acquired in the atomic update needs to not be invalidated by the cleanup. The buffer objects in vmw_plane_state instead of using the builtin map_and_cache were trying to handle the lifetime of the mapped memory themselves, leading to crashes. Use the map_and_cache instead of trying to manage the lifetime of the buffer objects held by the vmw_plane_state. Fixes kernel oops'es in IGT's kms_cursor_legacy forked-bo.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix kernel panic on unknown packet types In the very rare case where a packet type is unknown to the driver, idpf_rx_process_skb_fields would return early without calling eth_type_trans to set the skb protocol / the network layer handler. This is especially problematic if tcpdump is running when such a packet is received, i.e. it would cause a kernel panic. Instead, call eth_type_trans for every single packet, even when the packet type is unknown.

In the Linux kernel, the following vulnerability has been resolved: xsk: recycle buffer in case Rx queue was full Add missing xsk_buff_free() call when __xsk_rcv_zc() failed to produce descriptor to XSK Rx queue.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel before 5.17, drivers/phy/tegra/xusb.c mishandles the tegra_xusb_find_port_node return value. Callers expect NULL in the error case, but an error pointer is used.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: prevent corruption in shrinking truncate I believe there are some issues introduced by commit 31651c607151 ("hfsplus: avoid deadlock on file truncation") HFS+ has extent records which always contains 8 extents. In case the first extent record in catalog file gets full, new ones are allocated from extents overflow file. In case shrinking truncate happens to middle of an extent record which locates in extents overflow file, the logic in hfsplus_file_truncate() was changed so that call to hfs_brec_remove() is not guarded any more. Right action would be just freeing the extents that exceed the new size inside extent record by calling hfsplus_free_extents(), and then check if the whole extent record should be removed. However since the guard (blk_cnt > start) is now after the call to hfs_brec_remove(), this has unfortunate effect that the last matching extent record is removed unconditionally. To reproduce this issue, create a file which has at least 10 extents, and then perform shrinking truncate into middle of the last extent record, so that the number of remaining extents is not under or divisible by 8. This causes the last extent record (8 extents) to be removed totally instead of truncating into middle of it. Thus this causes corruption, and lost data. Fix for this is simply checking if the new truncated end is below the start of this extent record, making it safe to remove the full extent record. However call to hfs_brec_remove() can't be moved to it's previous place since we're dropping ->tree_lock and it can cause a race condition and the cached info being invalidated possibly corrupting the node data. Another issue is related to this one. When entering into the block (blk_cnt > start) we are not holding the ->tree_lock. We break out from the loop not holding the lock, but hfs_find_exit() does unlock it. Not sure if it's possible for someone else to take the lock under our feet, but it can cause hard to debug errors and premature unlocking. Even if there's no real risk of it, the locking should still always be kept in balance. Thus taking the lock now just before the check.

In the Linux kernel, the following vulnerability has been resolved: udp: do not accept non-tunnel GSO skbs landing in a tunnel When rx-udp-gro-forwarding is enabled UDP packets might be GROed when being forwarded. If such packets might land in a tunnel this can cause various issues and udp_gro_receive makes sure this isn't the case by looking for a matching socket. This is performed in udp4/6_gro_lookup_skb but only in the current netns. This is an issue with tunneled packets when the endpoint is in another netns. In such cases the packets will be GROed at the UDP level, which leads to various issues later on. The same thing can happen with rx-gro-list. We saw this with geneve packets being GROed at the UDP level. In such case gso_size is set; later the packet goes through the geneve rx path, the geneve header is pulled, the offset are adjusted and frag_list skbs are not adjusted with regard to geneve. When those skbs hit skb_fragment, it will misbehave. Different outcomes are possible depending on what the GROed skbs look like; from corrupted packets to kernel crashes. One example is a BUG_ON[1] triggered in skb_segment while processing the frag_list. Because gso_size is wrong (geneve header was pulled) skb_segment thinks there is "geneve header size" of data in frag_list, although it's in fact the next packet. The BUG_ON itself has nothing to do with the issue. This is only one of the potential issues. Looking up for a matching socket in udp_gro_receive is fragile: the lookup could be extended to all netns (not speaking about performances) but nothing prevents those packets from being modified in between and we could still not find a matching socket. It's OK to keep the current logic there as it should cover most cases but we also need to make sure we handle tunnel packets being GROed too early. This is done by extending the checks in udp_unexpected_gso: GSO packets lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must be segmented. [1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560

In the Linux kernel, the following vulnerability has been resolved: IB/mad: Don't call to function that might sleep while in atomic context Tracepoints are not allowed to sleep, as such the following splat is generated due to call to ib_query_pkey() in atomic context. WARNING: CPU: 0 PID: 1888000 at kernel/trace/ring_buffer.c:2492 rb_commit+0xc1/0x220 CPU: 0 PID: 1888000 Comm: kworker/u9:0 Kdump: loaded Tainted: G OE --------- - - 4.18.0-305.3.1.el8.x86_64 #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module_el8.3.0+555+a55c8938 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:rb_commit+0xc1/0x220 RSP: 0000:ffffa8ac80f9bca0 EFLAGS: 00010202 RAX: ffff8951c7c01300 RBX: ffff8951c7c14a00 RCX: 0000000000000246 RDX: ffff8951c707c000 RSI: ffff8951c707c57c RDI: ffff8951c7c14a00 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8951c7c01300 R11: 0000000000000001 R12: 0000000000000246 R13: 0000000000000000 R14: ffffffff964c70c0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8951fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f20e8f39010 CR3: 000000002ca10005 CR4: 0000000000170ef0 Call Trace: ring_buffer_unlock_commit+0x1d/0xa0 trace_buffer_unlock_commit_regs+0x3b/0x1b0 trace_event_buffer_commit+0x67/0x1d0 trace_event_raw_event_ib_mad_recv_done_handler+0x11c/0x160 [ib_core] ib_mad_recv_done+0x48b/0xc10 [ib_core] ? trace_event_raw_event_cq_poll+0x6f/0xb0 [ib_core] __ib_process_cq+0x91/0x1c0 [ib_core] ib_cq_poll_work+0x26/0x80 [ib_core] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 ---[ end trace 78ba8509d3830a16 ]---

In the Linux kernel, the following vulnerability has been resolved: lib/fonts: fix undefined behavior in bit shift for get_default_font Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in lib/fonts/fonts.c:139:20 left shift of 1 by 31 places cannot be represented in type 'int' <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c get_default_font+0x1c7/0x1f0 fbcon_startup+0x347/0x3a0 do_take_over_console+0xce/0x270 do_fbcon_takeover+0xa1/0x170 do_fb_registered+0x2a8/0x340 fbcon_fb_registered+0x47/0xe0 register_framebuffer+0x294/0x4a0 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper] drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper] drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper] drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper] bochs_pci_probe+0x6ca/0x772 [bochs] local_pci_probe+0x4d/0xb0 pci_device_probe+0x119/0x320 really_probe+0x181/0x550 __driver_probe_device+0xc6/0x220 driver_probe_device+0x32/0x100 __driver_attach+0x195/0x200 bus_for_each_dev+0xbb/0x120 driver_attach+0x27/0x30 bus_add_driver+0x22e/0x2f0 driver_register+0xa9/0x190 __pci_register_driver+0x90/0xa0 bochs_pci_driver_init+0x52/0x1000 [bochs] do_one_initcall+0x76/0x430 do_init_module+0x61/0x28a load_module+0x1f82/0x2e50 __do_sys_finit_module+0xf8/0x190 __x64_sys_finit_module+0x23/0x30 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: ext4: init quota for 'old.inode' in 'ext4_rename' Syzbot found the following issue: ext4_parse_param: s_want_extra_isize=128 ext4_inode_info_init: s_want_extra_isize=32 ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828 __ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128 __ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128 ext4_xattr_block_set: inode=ffff88823869a2c8 ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980 Modules linked in: RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980 RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000 RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178 RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000 R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000 FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? ext4_xattr_set_entry+0x3b7/0x2320 ? ext4_xattr_block_set+0x0/0x2020 ? ext4_xattr_set_entry+0x0/0x2320 ? ext4_xattr_check_entries+0x77/0x310 ? ext4_xattr_ibody_set+0x23b/0x340 ext4_xattr_move_to_block+0x594/0x720 ext4_expand_extra_isize_ea+0x59a/0x10f0 __ext4_expand_extra_isize+0x278/0x3f0 __ext4_mark_inode_dirty.cold+0x347/0x410 ext4_rename+0xed3/0x174f vfs_rename+0x13a7/0x2510 do_renameat2+0x55d/0x920 __x64_sys_rename+0x7d/0xb0 do_syscall_64+0x3b/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty, which may trigger expand 'extra_isize' and allocate block. If inode didn't init quota will lead to warning. To solve above issue, init 'old.inode' firstly in 'ext4_rename'.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent bad output lengths in smb2_ioctl_query_info() When calling smb2_ioctl_query_info() with smb_query_info::flags=PASSTHRU_FSCTL and smb_query_info::output_buffer_length=0, the following would return 0x10 buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length); if (IS_ERR(buffer)) { kfree(vars); return PTR_ERR(buffer); } rather than a valid pointer thus making IS_ERR() check fail. This would then cause a NULL ptr deference in @buffer when accessing it later in smb2_ioctl_query_ioctl(). While at it, prevent having a @buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO FileEndOfFileInformation requests when smb_query_info::flags=PASSTHRU_SET_INFO. Here is a small C reproducer which triggers a NULL ptr in @buffer when passing an invalid smb_query_info::flags #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> #define die(s) perror(s), exit(1) #define QUERY_INFO 0xc018cf07 int main(int argc, char *argv[]) { int fd; if (argc < 2) exit(1); fd = open(argv[1], O_RDONLY); if (fd == -1) die("open"); if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1) die("ioctl"); close(fd); return 0; } mount.cifs //srv/share /mnt -o ... gcc repro.c && ./a.out /mnt/f0 [ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1 [ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs] [ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24 [ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256 [ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d [ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380 [ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003 [ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288 [ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000 [ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000 [ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0 [ 114.146131] Call Trace: [ 114.146291] <TASK> [ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs] [ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs] [ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs] [ 114.147775] ? dentry_path_raw+0xa6/0xf0 [ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs] [ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs] [ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs] [ 114.149371] ? lock_downgrade+0x6f0/0x6f0 [ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs] [ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0 [ 114.150562] ? __up_read+0x192/0x710 [ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0 [ 114.151025] ? __x64_sys_openat+0x11f/0x1d0 [ 114.151296] __x64_sys_ioctl+0x127/0x190 [ 114.151549] do_syscall_64+0x3b/0x90 [ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 114.152079] RIP: 0033:0x7f7aead043df [ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: gso: fix panic on frag_list with mixed head alloc types Since commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list"), it is allowed to change gso_size of a GRO packet. However, that commit assumes that "checking the first list_skb member suffices; i.e if either of the list_skb members have non head_frag head, then the first one has too". It turns out this assumption does not hold. We've seen BUG_ON being hit in skb_segment when skbs on the frag_list had differing head_frag with the vmxnet3 driver. This happens because __netdev_alloc_skb and __napi_alloc_skb can return a skb that is page backed or kmalloced depending on the requested size. As the result, the last small skb in the GRO packet can be kmalloced. There are three different locations where this can be fixed: (1) We could check head_frag in GRO and not allow GROing skbs with different head_frag. However, that would lead to performance regression on normal forward paths with unmodified gso_size, where !head_frag in the last packet is not a problem. (2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating that NETIF_F_SG is undesirable. That would need to eat a bit in sk_buff. Furthermore, that flag can be unset when all skbs on the frag_list are page backed. To retain good performance, bpf_skb_net_grow/shrink would have to walk the frag_list. (3) Walk the frag_list in skb_segment when determining whether NETIF_F_SG should be cleared. This of course slows things down. This patch implements (3). To limit the performance impact in skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set that have gso_size changed. Normal paths thus will not hit it. We could check only the last skb but since we need to walk the whole list anyway, let's stay on the safe side.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix reset error handling Do not call iavf_close in iavf_reset_task error handling. Doing so can lead to double call of napi_disable, which can lead to deadlock there. Removing VF would lead to iavf_remove task being stuck, because it requires crit_lock, which is held by iavf_close. Call iavf_disable_vf if reset fail, so that driver will clean up remaining invalid resources. During rapid VF resets, HW can fail to setup VF mailbox. Wrong error handling can lead to iavf_remove being stuck with: [ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53 ... [ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds. [ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000 [ 5267.190347] Call Trace: [ 5267.190647] <TASK> [ 5267.190927] __schedule+0x460/0x9f0 [ 5267.191264] schedule+0x44/0xb0 [ 5267.191563] schedule_preempt_disabled+0x14/0x20 [ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0 [ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf] [ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf] [ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40 [ 5267.193285] pci_device_remove+0x36/0xb0 [ 5267.193619] device_release_driver_internal+0xc1/0x150 [ 5267.193974] pci_stop_bus_device+0x69/0x90 [ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20 [ 5267.194735] pci_iov_remove_virtfn+0xba/0x120 [ 5267.195130] sriov_disable+0x2f/0xe0 [ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice] [ 5267.196056] ? pci_get_device+0x4f/0x70 [ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice] [ 5267.196995] sriov_numvfs_store+0xfe/0x140 [ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0 [ 5267.197918] new_sync_write+0x10c/0x190 [ 5267.198404] vfs_write+0x24e/0x2d0 [ 5267.198886] ksys_write+0x5c/0xd0 [ 5267.199367] do_syscall_64+0x3a/0x80 [ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 5267.200317] RIP: 0033:0x7f5b381205c8 [ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8 [ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001 [ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820 [ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0 [ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002 [ 5267.206041] </TASK> [ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks [ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 5267.209623] Call Trace: [ 5267.210569] <TASK> [ 5267.211480] dump_stack_lvl+0x33/0x42 [ 5267.212472] panic+0x107/0x294 [ 5267.213467] watchdog.cold.8+0xc/0xbb [ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30 [ 5267.215511] kthread+0xf4/0x120 [ 5267.216459] ? kthread_complete_and_exit+0x20/0x20 [ 5267.217505] ret_from_fork+0x22/0x30 [ 5267.218459] </TASK>

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix match incorrectly in dev_args_match_device syzkaller found a failed assertion: assertion failed: (args->devid != (u64)-1) || args->missing, in fs/btrfs/volumes.c:6921 This can be triggered when we set devid to (u64)-1 by ioctl. In this case, the match of devid will be skipped and the match of device may succeed incorrectly. Patch 562d7b1512f7 introduced this function which is used to match device. This function contains two matching scenarios, we can distinguish them by checking the value of args->missing rather than check whether args->devid and args->uuid is default value.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled The debugging code for kmap_local() doubles the number of per-CPU fixmap slots allocated for kmap_local(), in order to use half of them as guard regions. This causes the fixmap region to grow downwards beyond the start of its reserved window if the supported number of CPUs is large, and collide with the newly added virtual DT mapping right below it, which is obviously not good. One manifestation of this is EFI boot on a kernel built with NR_CPUS=32 and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting in block entries below the fixmap region that the fixmap code misidentifies as fixmap table entries, and subsequently tries to dereference using a phys-to-virt translation that is only valid for lowmem. This results in a cryptic splat such as the one below. ftrace: allocating 45548 entries in 89 pages 8<--- cut here --- Unable to handle kernel paging request at virtual address fc6006f0 pgd = (ptrval) [fc6006f0] *pgd=80000040207003, *pmd=00000000 Internal error: Oops: a06 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382 Hardware name: Generic DT based system PC is at cpu_ca15_set_pte_ext+0x24/0x30 LR is at __set_fixmap+0xe4/0x118 pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3 sp : c1601ed8 ip : 00400000 fp : 00800000 r10: 0000071f r9 : 00421000 r8 : 00c00000 r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0 Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 30c5387d Table: 40203000 DAC: 00000001 Process swapper (pid: 0, stack limit = 0x(ptrval)) So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also, fix the BUILD_BUG_ON() check that was supposed to catch this, by checking whether the region grows below the start address rather than above the end address.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ionic: fix kernel panic in XDP_TX action In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use __try_cmpxchg_user() to update guest PTE A/D bits Use the recently introduced __try_cmpxchg_user() to update guest PTE A/D bits instead of mapping the PTE into kernel address space. The VM_PFNMAP path is broken as it assumes that vm_pgoff is the base pfn of the mapped VMA range, which is conceptually wrong as vm_pgoff is the offset relative to the file and has nothing to do with the pfn. The horrific hack worked for the original use case (backing guest memory with /dev/mem), but leads to accessing "random" pfns for pretty much any other VM_PFNMAP case.

In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume mac header is set in skb_tunnel_check_pmtu() Recently added debug in commit f9aefd6b2aa3 ("net: warn if mac header was not set") caught a bug in skb_tunnel_check_pmtu(), as shown in this syzbot report [1]. In ndo_start_xmit() paths, there is really no need to use skb->mac_header, because skb->data is supposed to point at it. [1] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_mac_header_len include/linux/skbuff.h:2784 [inline] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Modules linked in: CPU: 1 PID: 8604 Comm: syz-executor.3 Not tainted 5.19.0-rc2-syzkaller-00443-g8720bd951b8e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_mac_header_len include/linux/skbuff.h:2784 [inline] RIP: 0010:skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Code: 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 80 3c 02 00 0f 84 b9 fe ff ff 4c 89 ff e8 7c 0f d7 f9 e9 ac fe ff ff e8 c2 13 8a f9 <0f> 0b e9 28 fc ff ff e8 b6 13 8a f9 48 8b 54 24 70 48 b8 00 00 00 RSP: 0018:ffffc90002e4f520 EFLAGS: 00010212 RAX: 0000000000000324 RBX: ffff88804d5fd500 RCX: ffffc90005b52000 RDX: 0000000000040000 RSI: ffffffff87f05e3e RDI: 0000000000000003 RBP: ffffc90002e4f650 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: 000000000000ffff R13: 0000000000000000 R14: 000000000000ffcd R15: 000000000000001f FS: 00007f3babba9700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000075319000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> geneve_xmit_skb drivers/net/geneve.c:927 [inline] geneve_xmit+0xcf8/0x35d0 drivers/net/geneve.c:1107 __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] __dev_direct_xmit+0x500/0x730 net/core/dev.c:4309 dev_direct_xmit include/linux/netdevice.h:3007 [inline] packet_direct_xmit+0x1b8/0x2c0 net/packet/af_packet.c:282 packet_snd net/packet/af_packet.c:3073 [inline] packet_sendmsg+0x21f4/0x55d0 net/packet/af_packet.c:3104 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2489 ___sys_sendmsg+0xf3/0x170 net/socket.c:2543 __sys_sendmsg net/socket.c:2572 [inline] __do_sys_sendmsg net/socket.c:2581 [inline] __se_sys_sendmsg net/socket.c:2579 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3baaa89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3babba9168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3baab9bf60 RCX: 00007f3baaa89109 RDX: 0000000000000000 RSI: 0000000020000a00 RDI: 0000000000000003 RBP: 00007f3baaae305d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe74f2543f R14: 00007f3babba9300 R15: 0000000000022000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction Mounting NFS rootfs was timing out when deferred_probe_timeout was non-zero [1]. This was because ip_auto_config() initcall times out waiting for the network interfaces to show up when deferred_probe_timeout was non-zero. While ip_auto_config() calls wait_for_device_probe() to make sure any currently running deferred probe work or asynchronous probe finishes, that wasn't sufficient to account for devices being deferred until deferred_probe_timeout. Commit 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires") tried to fix that by making sure wait_for_device_probe() waits for deferred_probe_timeout to expire before returning. However, if wait_for_device_probe() is called from the kernel_init() context: - Before deferred_probe_initcall() [2], it causes the boot process to hang due to a deadlock. - After deferred_probe_initcall() [3], it blocks kernel_init() from continuing till deferred_probe_timeout expires and beats the point of deferred_probe_timeout that's trying to wait for userspace to load modules. Neither of this is good. So revert the changes to wait_for_device_probe(). [1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/ [2] - https://lore.kernel.org/lkml/YowHNo4sBjr9ijZr@dev-arch.thelio-3990X/ [3] - https://lore.kernel.org/lkml/Yo3WvGnNk3LvLb7R@linutronix.de/

In the Linux kernel, the following vulnerability has been resolved: media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED If the callback 'start_streaming' fails, then all queued buffers in the driver should be returned with state 'VB2_BUF_STATE_QUEUED'. Currently, they are returned with 'VB2_BUF_STATE_ERROR' which is wrong. Fix this. This also fixes the warning: [ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6 [ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14 [ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT) [ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common] [ 65.592395] sp : ffff800012bc3ad0 [ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8 [ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612 [ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0 [ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff [ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78 [ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce [ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228 [ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78 [ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880 [ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0 [ 65.598940] Call trace: [ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common] [ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2] [ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2] [ 65.601103] v4l_streamon+0x3c/0x50 [videodev] [ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev] [ 65.601977] video_usercopy+0x320/0x828 [videodev] [ 65.602419] video_ioctl2+0x3c/0x58 [videodev] [ 65.602830] v4l2_ioctl+0x60/0x90 [videodev] [ 65.603227] __arm64_sys_ioctl+0xa8/0xe0 [ 65.603576] invoke_syscall+0x54/0x118 [ 65.603911] el0_svc_common.constprop.3+0x84/0x100 [ 65.604332] do_el0_svc+0x34/0xa0 [ 65.604625] el0_svc+0x1c/0x50 [ 65.604897] el0t_64_sync_handler+0x88/0xb0 [ 65.605264] el0t_64_sync+0x16c/0x170 [ 65.605587] ---[ end trace 578e0ba07742170d ]---

In the Linux kernel before 5.16.3, drivers/bluetooth/hci_qca.c misinterprets the devm_gpiod_get_index_optional return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 6.1.2, kernel/module/decompress.c misinterprets the module_get_next_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on ext4_mb_use_inode_pa Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/mballoc.c:3211! [...] RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f [...] Call Trace: ext4_mb_new_blocks+0x9df/0x5d30 ext4_ext_map_blocks+0x1803/0x4d80 ext4_map_blocks+0x3a4/0x1a10 ext4_writepages+0x126d/0x2c30 do_writepages+0x7f/0x1b0 __filemap_fdatawrite_range+0x285/0x3b0 file_write_and_wait_range+0xb1/0x140 ext4_sync_file+0x1aa/0xca0 vfs_fsync_range+0xfb/0x260 do_fsync+0x48/0xa0 [...] ================================================================== Above issue may happen as follows: ------------------------------------- do_fsync vfs_fsync_range ext4_sync_file file_write_and_wait_range __filemap_fdatawrite_range do_writepages ext4_writepages mpage_map_and_submit_extent mpage_map_one_extent ext4_map_blocks ext4_mb_new_blocks ext4_mb_normalize_request >>> start + size <= ac->ac_o_ex.fe_logical ext4_mb_regular_allocator ext4_mb_simple_scan_group ext4_mb_use_best_found ext4_mb_new_preallocation ext4_mb_new_inode_pa ext4_mb_use_inode_pa >>> set ac->ac_b_ex.fe_len <= 0 ext4_mb_mark_diskspace_used >>> BUG_ON(ac->ac_b_ex.fe_len <= 0); we can easily reproduce this problem with the following commands: `fallocate -l100M disk` `mkfs.ext4 -b 1024 -g 256 disk` `mount disk /mnt` `fsstress -d /mnt -l 0 -n 1000 -p 1` The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP. Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur when the size is truncated. So start should be the start position of the group where ac_o_ex.fe_logical is located after alignment. In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP is very large, the value calculated by start_off is more accurate.

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_fill_super If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff888105a65340 (size 64): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff859c45e5>] kmem_cache_alloc_trace+0x475/0x8a0 [<ffffffff86160146>] jffs2_sum_init+0x96/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] unreferenced object 0xffff8881bd7f0000 (size 65536): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffff858579ba>] kmalloc_order+0xda/0x110 [<ffffffff85857a11>] kmalloc_order_trace+0x21/0x130 [<ffffffff859c2ed1>] __kmalloc+0x711/0x8a0 [<ffffffff86160189>] jffs2_sum_init+0xd9/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem.