In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix uninitialised kfifo If a line is requested with debounce, and that results in debouncing in software, and the line is subsequently reconfigured to enable edge detection then the allocation of the kfifo to contain edge events is overlooked. This results in events being written to and read from an uninitialised kfifo. Read events are returned to userspace. Initialise the kfifo in the case where the software debounce is already active.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_network_name_deleted() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: mm: use aligned address in copy_user_gigantic_page() In current kernel, hugetlb_wp() calls copy_user_large_folio() with the fault address. Where the fault address may be not aligned with the huge page size. Then, copy_user_large_folio() may call copy_user_gigantic_page() with the address, while copy_user_gigantic_page() requires the address to be huge page size aligned. So, this may cause memory corruption or information leak, addtional, use more obvious naming 'addr_hint' instead of 'addr' for copy_user_gigantic_page().

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") the code to ignore power off of a PF that has child VFs was changed from a direct return to a goto to the unlock and pci_dev_put() section. The change however left the existing pci_dev_put() untouched resulting in a doubple put. This can subsequently cause a use after free if the struct pci_dev is released in an unexpected state. Fix this by removing the extra pci_dev_put().

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not trigger WARN_ON() due to a commit_overrun When reading a memory mapped buffer the reader page is just swapped out with the last page written in the write buffer. If the reader page is the same as the commit buffer (the buffer that is currently being written to) it was assumed that it should never have missed events. If it does, it triggers a WARN_ON_ONCE(). But there just happens to be one scenario where this can legitimately happen. That is on a commit_overrun. A commit overrun is when an interrupt preempts an event being written to the buffer and then the interrupt adds so many new events that it fills and wraps the buffer back to the commit. Any new events would then be dropped and be reported as "missed_events". In this case, the next page to read is the commit buffer and after the swap of the reader page, the reader page will be the commit buffer, but this time there will be missed events and this triggers the following warning: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1127 at kernel/trace/ring_buffer.c:7357 ring_buffer_map_get_reader+0x49a/0x780 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 1127 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00004-g478bc2824b45-dirty #564 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ring_buffer_map_get_reader+0x49a/0x780 Code: 00 00 00 48 89 fe 48 c1 ee 03 80 3c 2e 00 0f 85 ec 01 00 00 4d 3b a6 a8 00 00 00 0f 85 8a fd ff ff 48 85 c0 0f 84 55 fe ff ff <0f> 0b e9 4e fe ff ff be 08 00 00 00 4c 89 54 24 58 48 89 54 24 50 RSP: 0018:ffff888121787dc0 EFLAGS: 00010002 RAX: 00000000000006a2 RBX: ffff888100062800 RCX: ffffffff8190cb49 RDX: ffff888126934c00 RSI: 1ffff11020200a15 RDI: ffff8881010050a8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffed1024d26982 R10: ffff888126934c17 R11: ffff8881010050a8 R12: ffff888126934c00 R13: ffff8881010050b8 R14: ffff888101005000 R15: ffff888126930008 FS: 00007f95c8cd7540(0000) GS:ffff8882b576e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95c8de4dc0 CR3: 0000000128452002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __pfx_ring_buffer_map_get_reader+0x10/0x10 tracing_buffers_ioctl+0x283/0x370 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f95c8de48db Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007ffe037ba110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe037bb2b0 RCX: 00007f95c8de48db RDX: 0000000000000000 RSI: 0000000000005220 RDI: 0000000000000006 RBP: 00007ffe037ba180 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe037bb6f8 R14: 00007f95c9065000 R15: 00005575c7492c90 </TASK> irq event stamp: 5080 hardirqs last enabled at (5079): [<ffffffff83e0adb0>] _raw_spin_unlock_irqrestore+0x50/0x70 hardirqs last disabled at (5080): [<ffffffff83e0aa83>] _raw_spin_lock_irqsave+0x63/0x70 softirqs last enabled at (4182): [<ffffffff81516122>] handle_softirqs+0x552/0x710 softirqs last disabled at (4159): [<ffffffff815163f7>] __irq_exit_rcu+0x107/0x210 ---[ end trace 0000000000000000 ]--- The above was triggered by running on a kernel with both lockdep and KASAN as well as kmemleak enabled and executing the following command: # perf record -o perf-test.dat -a -- trace-cmd record --nosplice -e all -p function hackbench 50 With perf interjecting a lot of interrupts and trace-cmd enabling all events as well as function tracing, with lockdep, KASAN and kmemleak enabled, it could cause an interrupt preempting an event being written to add enough event ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ppdev: Add an error check in register_device In register_device, the return value of ida_simple_get is unchecked, in witch ida_simple_get will use an invalid index value. To address this issue, index should be checked after ida_simple_get. When the index value is abnormal, a warning message should be printed, the port should be dropped, and the value should be recorded.

Integer overflow in the SCTP_SOCKOPT_DEBUG_NAME SCTP socket option in socket.c in the Linux kernel 2.4.25 and earlier allows local users to execute arbitrary code via an optlen value of -1, which causes kmalloc to allocate 0 bytes of memory.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of new block group that became unused If a task creates a new block group and that block group becomes unused before we finish its creation, at btrfs_create_pending_block_groups(), then when btrfs_mark_bg_unused() is called against the block group, we assume that the block group is currently in the list of block groups to reclaim, and we move it out of the list of new block groups and into the list of unused block groups. This has two consequences: 1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items; 2) We don't increment the reference count on the block group when we move it to the list of unused block groups, because we assumed the block group was on the list of block groups to reclaim, and in that case it already has the correct reference count. However the block group was on the list of new block groups, in which case no extra reference was taken because it's local to the current task. This later results in doing an extra reference count decrement when removing the block group from the unused list, eventually leading the reference count to 0. This second case was caught when running generic/297 from fstests, which produced the following assertion failure and stack trace: [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299 [589.559] ------------[ cut here ]------------ [589.559] kernel BUG at fs/btrfs/block-group.c:4299! [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.561] Code: 68 62 da c0 (...) [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246 [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000 [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50 [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00 [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100 [589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000 [589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0 [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [589.564] Call Trace: [589.564] <TASK> [589.565] ? __die_body+0x1b/0x60 [589.565] ? die+0x39/0x60 [589.565] ? do_trap+0xeb/0x110 [589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? do_error_trap+0x6a/0x90 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? exc_invalid_op+0x4e/0x70 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? asm_exc_invalid_op+0x16/0x20 [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] close_ctree+0x35d/0x560 [btrfs] [589.568] ? fsnotify_sb_delete+0x13e/0x1d0 [589.568] ? dispose_list+0x3a/0x50 [589.568] ? evict_inodes+0x151/0x1a0 [589.568] generic_shutdown_super+0x73/0x1a0 [589.569] kill_anon_super+0x14/0x30 [589.569] btrfs_kill_super+0x12/0x20 [btrfs] [589.569] deactivate_locked ---truncated---

In the Linux kernel, the following vulnerability has been resolved: um: virtio_uml: Fix use-after-free after put_device in probe When register_virtio_device() fails in virtio_uml_probe(), the code sets vu_dev->registered = 1 even though the device was not successfully registered. This can lead to use-after-free or other issues.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-thc: Fix incorrect pointer arithmetic in I2C regs save Improper use of secondary pointer (&dev->i2c_subip_regs) caused kernel crash and out-of-bounds error: BUG: KASAN: slab-out-of-bounds in _regmap_bulk_read+0x449/0x510 Write of size 4 at addr ffff888136005dc0 by task kworker/u33:5/5107 CPU: 3 UID: 0 PID: 5107 Comm: kworker/u33:5 Not tainted 6.16.0+ #3 PREEMPT(voluntary) Workqueue: async async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x660 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x26/0x200 kasan_report+0xe1/0x120 ? _regmap_bulk_read+0x449/0x510 ? _regmap_bulk_read+0x449/0x510 __asan_report_store4_noabort+0x17/0x30 _regmap_bulk_read+0x449/0x510 ? __pfx__regmap_bulk_read+0x10/0x10 regmap_bulk_read+0x270/0x3d0 pio_complete+0x1ee/0x2c0 [intel_thc] ? __pfx_pio_complete+0x10/0x10 [intel_thc] ? __pfx_pio_wait+0x10/0x10 [intel_thc] ? regmap_update_bits_base+0x13b/0x1f0 thc_i2c_subip_pio_read+0x117/0x270 [intel_thc] thc_i2c_subip_regs_save+0xc2/0x140 [intel_thc] ? __pfx_thc_i2c_subip_regs_save+0x10/0x10 [intel_thc] [...] The buggy address belongs to the object at ffff888136005d00 which belongs to the cache kmalloc-rnd-12-192 of size 192 The buggy address is located 0 bytes to the right of allocated 192-byte region [ffff888136005d00, ffff888136005dc0) Replaced with direct array indexing (&dev->i2c_subip_regs[i]) to ensure safe memory access.

In the Linux kernel, the following vulnerability has been resolved: cnic: Fix use-after-free bugs in cnic_delete_task The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after the cyclic work items have finished executing, a delayed work item may still exist in the workqueue. This leads to use-after-free scenarios where the cnic_dev is deallocated by cnic_free_dev(), while delete_task remains active and attempt to dereference cnic_dev in cnic_delete_task(). A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //use Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the cyclic delayed work item is properly canceled and that any ongoing execution of the work item completes before the cnic_dev is deallocated. Furthermore, since cancel_delayed_work_sync() uses __flush_work(work, true) to synchronously wait for any currently executing instance of the work item to finish, the flush_workqueue() becomes redundant and should be removed. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated the cnic PCI device in QEMU and introduced intentional delays — such as inserting calls to ssleep() within the cnic_delete_task() function — to increase the likelihood of triggering the bug.

In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733 [ +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G W 6.14.0+ #2 [ +0.000009] Tainted: [W]=WARN [ +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000003] dump_stack_lvl+0x76/0xa0 [ +0.000011] print_report+0xce/0x600 [ +0.000009] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? kasan_complete_mode_report_info+0x76/0x200 [ +0.000007] ? kasan_addr_to_slab+0xd/0xb0 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000707] kasan_report+0xbe/0x110 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000541] __asan_report_load8_noabort+0x14/0x30 [ +0.000005] amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000535] ? stop_cpsch+0x396/0x600 [amdgpu] [ +0.000556] ? stop_cpsch+0x429/0x600 [amdgpu] [ +0.000536] ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu] [ +0.000536] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu] [ +0.000542] amdgpu_device_fini_hw+0x581/0xe90 [amdgpu] [ +0.000485] ? down_write+0xbb/0x140 [ +0.000007] ? __mutex_unlock_slowpath.constprop.0+0x317/0x360 [ +0.000005] ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu] [ +0.000482] ? __kasan_check_write+0x14/0x30 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? up_write+0x55/0xb0 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? blocking_notifier_chain_unregister+0x6c/0xc0 [ +0.000008] amdgpu_driver_unload_kms+0x69/0x90 [amdgpu] [ +0.000484] amdgpu_pci_remove+0x93/0x130 [amdgpu] [ +0.000482] pci_device_remove+0xae/0x1e0 [ +0.000008] device_remove+0xc7/0x180 [ +0.000008] device_release_driver_internal+0x3d4/0x5a0 [ +0.000007] device_release_driver+0x12/0x20 [ +0.000004] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000005] remove_store+0xd7/0xf0 [ +0.000005] ? __pfx_remove_store+0x10/0x10 [ +0.000006] ? __pfx__copy_from_iter+0x10/0x10 [ +0.000006] ? __pfx_dev_attr_store+0x10/0x10 [ +0.000006] dev_attr_store+0x3f/0x80 [ +0.000006] sysfs_kf_write+0x125/0x1d0 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __kasan_check_write+0x14/0x30 [ +0.000005] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000005] ? rw_verify_area+0x70/0x420 [ +0.000005] ? __pfx_kernfs_fop_write_iter+0x10/0x10 [ +0.000006] vfs_write+0x90d/0xe70 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pfx_vfs_write+0x10/0x10 [ +0.000004] ? local_clock+0x15/0x30 [ +0.000008] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_slab_free+0x5f/0x80 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fdget_pos+0x1d3/0x500 [ +0.000007] ksys_write+0x119/0x220 [ +0.000005] ? putname+0x1c/0x30 [ +0.000006] ? __pfx_ksys_write+0x10/0x10 [ +0.000007] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __pfx___x64_sys_openat+0x10/0x10 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? irqentry_exit+0x43/0x50 [ +0.000004] ? srso_return_thunk+0x5 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Make attach succeed when the device was surprise removed When a PCI device is removed with surprise hotplug, there may still be attempts to attach the device to the default domain as part of tear down via (__iommu_release_dma_ownership()), or because the removal happens during probe (__iommu_probe_device()). In both cases zpci_register_ioat() fails with a cc value indicating that the device handle is invalid. This is because the device is no longer part of the instance as far as the hypervisor is concerned. Currently this leads to an error return and s390_iommu_attach_device() fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail() because attaching to the default domain must never fail. With the device fenced by the hypervisor no DMAs to or from memory are possible and the IOMMU translations have no effect. Proceed as if the registration was successful and let the hotplug event handling clean up the device. This is similar to how devices in the error state are handled since commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device is in error state") except that for removal the domain will not be registered later. This approach was also previously discussed at the link. Handle both cases, error state and removal, in a helper which checks if the error needs to be propagated or ignored. Avoid magic number condition codes by using the pre-existing, but never used, defines for PCI load/store condition codes and rename them to reflect that they apply to all PCI instructions.

Signal Desktop before 6.2.0 on Windows, Linux, and macOS allows an attacker to modify conversation attachments within the attachments.noindex directory. Client mechanisms fail to validate modifications of existing cached files, resulting in an attacker's ability to insert malicious code into pre-existing attachments or replace them completely. A threat actor can forward the existing attachment in the corresponding conversation to external groups, and the name and size of the file will not change, allowing the malware to masquerade as another file. NOTE: the vendor disputes the relevance of this finding because the product is not intended to protect against adversaries with this degree of local access.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 power domain descriptors, too UAC3 power domain descriptors need to be verified with its variable bLength for avoiding the unexpected OOB accesses by malicious firmware, too.

In the Linux kernel, the following vulnerability has been resolved: io_uring/memmap: cast nr_pages to size_t before shifting If the allocated size exceeds UINT_MAX, then it's necessary to cast the mr->nr_pages value to size_t to prevent it from overflowing. In practice this isn't much of a concern as the required memory size will have been validated upfront, and accounted to the user. And > 4GB sizes will be necessary to make the lack of a cast a problem, which greatly exceeds normal user locked_vm settings that are generally in the kb to mb range. However, if root is used, then accounting isn't done, and then it's possible to hit this issue.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Make cake_enqueue return NET_XMIT_CN when past buffer_limit The following setup can trigger a WARNING in htb_activate due to the condition: !cl->leaf.q->q.qlen tc qdisc del dev lo root tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 \ htb rate 64bit tc qdisc add dev lo parent 1:1 handle f: \ cake memlimit 1b ping -I lo -f -c1 -s64 -W0.001 127.0.0.1 This is because the low memlimit leads to a low buffer_limit, which causes packet dropping. However, cake_enqueue still returns NET_XMIT_SUCCESS, causing htb_enqueue to call htb_activate with an empty child qdisc. We should return NET_XMIT_CN when packets are dropped from the same tin and flow. I do not believe return value of NET_XMIT_CN is necessary for packet drops in the case of ack filtering, as that is meant to optimize performance, not to signal congestion.

In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix UAF via HID_CLAIMED_INPUT validation After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfre ---truncated---

In the Linux kernel, the following vulnerability has been resolved: libceph: fix invalid accesses to ceph_connection_v1_info There is a place where generic code in messenger.c is reading and another place where it is writing to con->v1 union member without checking that the union member is active (i.e. msgr1 is in use). On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter, so such a read is almost guaranteed to return a bogus value instead of 0 when msgr2 is in use. This ends up being fairly benign because the side effect is just the invalidation of the authorizer and successive fetching of new tickets. con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that it's being written to can cause more serious consequences, but luckily it's not something that happens often.

In the Linux kernel, the following vulnerability has been resolved: jfs: truncate good inode pages when hard link is 0 The fileset value of the inode copy from the disk by the reproducer is AGGR_RESERVED_I. When executing evict, its hard link number is 0, so its inode pages are not truncated. This causes the bugon to be triggered when executing clear_inode() because nrpages is greater than 0.

In the Linux kernel, the following vulnerability has been resolved: ipv6: reject malicious packets in ipv6_gso_segment() syzbot was able to craft a packet with very long IPv6 extension headers leading to an overflow of skb->transport_header. This 16bit field has a limited range. Add skb_reset_transport_header_careful() helper and use it from ipv6_gso_segment() WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline] WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Modules linked in: CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline] RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Call Trace: <TASK> skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110 skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 __skb_gso_segment+0x342/0x510 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950 validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000 sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329 __dev_xmit_skb net/core/dev.c:4102 [inline] __dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF on smcsk after smc_listen_out() BPF CI testing report a UAF issue: [ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0 [ 16.447134] #PF: supervisor read access in kernel mod e [ 16.447516] #PF: error_code(0x0000) - not-present pag e [ 16.447878] PGD 0 P4D 0 [ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I [ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2 [ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E [ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4 [ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k [ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0 [ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6 [ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0 [ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0 [ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5 [ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0 [ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0 [ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0 [ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3 [ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0 [ 16.456459] PKRU: 5555555 4 [ 16.456654] Call Trace : [ 16.456832] <TASK > [ 16.456989] ? __die+0x23/0x7 0 [ 16.457215] ? page_fault_oops+0x180/0x4c 0 [ 16.457508] ? __lock_acquire+0x3e6/0x249 0 [ 16.457801] ? exc_page_fault+0x68/0x20 0 [ 16.458080] ? asm_exc_page_fault+0x26/0x3 0 [ 16.458389] ? smc_listen_work+0xc02/0x159 0 [ 16.458689] ? smc_listen_work+0xc02/0x159 0 [ 16.458987] ? lock_is_held_type+0x8f/0x10 0 [ 16.459284] process_one_work+0x1ea/0x6d 0 [ 16.459570] worker_thread+0x1c3/0x38 0 [ 16.459839] ? __pfx_worker_thread+0x10/0x1 0 [ 16.460144] kthread+0xe0/0x11 0 [ 16.460372] ? __pfx_kthread+0x10/0x1 0 [ 16.460640] ret_from_fork+0x31/0x5 0 [ 16.460896] ? __pfx_kthread+0x10/0x1 0 [ 16.461166] ret_from_fork_asm+0x1a/0x3 0 [ 16.461453] </TASK > [ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ] [ 16.462134] CR2: 000000000000003 0 [ 16.462380] ---[ end trace 0000000000000000 ]--- [ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590 The direct cause of this issue is that after smc_listen_out_connected(), newclcsock->sk may be NULL since it will releases the smcsk. Therefore, if the application closes the socket immediately after accept, newclcsock->sk can be NULL. A possible execution order could be as follows: smc_listen_work | userspace ----------------------------------------------------------------- lock_sock(sk) | smc_listen_out_connected() | | \- smc_listen_out | | | \- release_sock | | |- sk->sk_data_ready() | | fd = accept(); | close(fd); | \- socket->sk = NULL; /* newclcsock->sk is NULL now */ SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk)) Since smc_listen_out_connected() will not fail, simply swapping the order of the code can easily fix this issue.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in cifs_oplock_break A race condition can occur in cifs_oplock_break() leading to a use-after-free of the cinode structure when unmounting: cifs_oplock_break() _cifsFileInfo_put(cfile) cifsFileInfo_put_final() cifs_sb_deactive() [last ref, start releasing sb] kill_sb() kill_anon_super() generic_shutdown_super() evict_inodes() dispose_list() evict() destroy_inode() call_rcu(&inode->i_rcu, i_callback) spin_lock(&cinode->open_file_lock) <- OK [later] i_callback() cifs_free_inode() kmem_cache_free(cinode) spin_unlock(&cinode->open_file_lock) <- UAF cifs_done_oplock_break(cinode) <- UAF The issue occurs when umount has already released its reference to the superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this releases the last reference, triggering the immediate cleanup of all inodes under RCU. However, cifs_oplock_break() continues to access the cinode after this point, resulting in use-after-free. Fix this by holding an extra reference to the superblock during the entire oplock break operation. This ensures that the superblock and its inodes remain valid until the oplock break completes.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix filehandle bounds checking in nfs_fh_to_dentry() The function needs to check the minimal filehandle length before it can access the embedded filehandle.

In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in binderfs_evict_inode() Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well.

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix memory corruption of input_handler_list In appletb_kbd_probe an input handler is initialised and then registered with input core through input_register_handler(). When this happens input core will add the input handler (specifically its node) to the global input_handler_list. The input_handler_list is central to the functionality of input core and is traversed in various places in input core. An example of this is when a new input device is plugged in and gets registered with input core. The input_handler in probe is allocated as device managed memory. If a probe failure occurs after input_register_handler() the input_handler memory is freed, yet it will remain in the input_handler_list. This effectively means the input_handler_list contains a dangling pointer to data belonging to a freed input handler. This causes an issue when any other input device is plugged in - in my case I had an old PixArt HP USB optical mouse and I decided to plug it in after a failure occurred after input_register_handler(). This lead to the registration of this input device via input_register_device which involves traversing over every handler in the corrupted input_handler_list and calling input_attach_handler(), giving each handler a chance to bind to newly registered device. The core of this bug is a UAF which causes memory corruption of input_handler_list and to fix it we must ensure the input handler is unregistered from input core, this is done through input_unregister_handler(). [ 63.191597] ================================================================== [ 63.192094] BUG: KASAN: slab-use-after-free in input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] Read of size 8 at addr ffff888105ea7c80 by task kworker/0:2/54 [ 63.192094] [ 63.192094] CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.16.0-rc2-00321-g2aa6621d [ 63.192094] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.164 [ 63.192094] Workqueue: usb_hub_wq hub_event [ 63.192094] Call Trace: [ 63.192094] <TASK> [ 63.192094] dump_stack_lvl+0x53/0x70 [ 63.192094] print_report+0xce/0x670 [ 63.192094] kasan_report+0xce/0x100 [ 63.192094] input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] input_register_device+0x76c/0xd00 [ 63.192094] hidinput_connect+0x686d/0xad60 [ 63.192094] hid_connect+0xf20/0x1b10 [ 63.192094] hid_hw_start+0x83/0x100 [ 63.192094] hid_device_probe+0x2d1/0x680 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] hid_add_device+0x30b/0x910 [ 63.192094] usbhid_probe+0x920/0xe00 [ 63.192094] usb_probe_interface+0x363/0x9a0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_set_configuration+0xd14/0x1880 [ 63.192094] usb_generic_driver_probe+0x78/0xb0 [ 63.192094] usb_probe_device+0xaa/0x2e0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_new_device+0x7b4/0x1000 [ 63.192094] hub_event+0x234d/0x3 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - check record size in ims_pcu_flash_firmware() The "len" variable comes from the firmware and we generally do trust firmware, but it's always better to double check. If the "len" is too large it could result in memory corruption when we do "memcpy(fragment->data, rec->data, len);"

In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: Fix buffer overflow at UMP SysEx message conversion The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received. The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode() With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use.

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: Fix use-after-free in gsm_cleanup_mux BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] Read of size 8 at addr ffff88815fe99c00 by task poc/3379 CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: <TASK> gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] __pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm] __pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389 update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500 __pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846 __rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161 gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] _raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107 __pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm] ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195 ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79 __pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338 __pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805 tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 Allocated by task 65: gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm] gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm] gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm] gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm] tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391 tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39 flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445 process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229 worker_thread+0x3dc/0x950 kernel/workqueue.c:3391 kthread+0x2a3/0x370 kernel/kthread.c:389 ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257 Freed by task 3367: kfree+0x126/0x420 mm/slub.c:4580 gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm] gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm] tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818 [Analysis] gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux can be freed by multi threads through ioctl,which leads to the occurrence of uaf. Protect it by gsm tx lock.

In the Linux kernel, the following vulnerability has been resolved: macsec: Fix use-after-free while sending the offloading packet KASAN reports the following UAF. The metadata_dst, which is used to store the SCI value for macsec offload, is already freed by metadata_dst_free() in macsec_free_netdev(), while driver still use it for sending the packet. To fix this issue, dst_release() is used instead to release metadata_dst. So it is not freed instantly in macsec_free_netdev() if still referenced by skb. BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714 [...] Workqueue: mld mld_ifc_work Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xc1/0x600 kasan_report+0xab/0xe0 mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] dev_hard_start_xmit+0x120/0x530 sch_direct_xmit+0x149/0x11e0 __qdisc_run+0x3ad/0x1730 __dev_queue_xmit+0x1196/0x2ed0 vlan_dev_hard_start_xmit+0x32e/0x510 [8021q] dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 macsec_start_xmit+0x13e9/0x2340 dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 ip6_finish_output2+0x923/0x1a70 ip6_finish_output+0x2d7/0x970 ip6_output+0x1ce/0x3a0 NF_HOOK.constprop.0+0x15f/0x190 mld_sendpack+0x59a/0xbd0 mld_ifc_work+0x48a/0xa80 process_one_work+0x5aa/0xe50 worker_thread+0x79c/0x1290 kthread+0x28f/0x350 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 </TASK> Allocated by task 3922: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x77/0x90 __kmalloc_noprof+0x188/0x400 metadata_dst_alloc+0x1f/0x4e0 macsec_newlink+0x914/0x1410 __rtnl_newlink+0xe08/0x15b0 rtnl_newlink+0x5f/0x90 rtnetlink_rcv_msg+0x667/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4011: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 poison_slab_object+0x10c/0x190 __kasan_slab_free+0x11/0x30 kfree+0xe0/0x290 macsec_free_netdev+0x3f/0x140 netdev_run_todo+0x450/0xc70 rtnetlink_rcv_msg+0x66f/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add length check in indx_get_root This adds a length check to guarantee the retrieved index root is legit. [ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320 [ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243 [ 162.460851] [ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42 [ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 162.462609] Call Trace: [ 162.462954] <TASK> [ 162.463276] dump_stack_lvl+0x49/0x63 [ 162.463822] print_report.cold+0xf5/0x689 [ 162.464608] ? unwind_get_return_address+0x3a/0x60 [ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.466975] kasan_report+0xa7/0x130 [ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0 [ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.468536] __asan_load2+0x68/0x90 [ 162.468923] hdr_find_e.isra.0+0x10c/0x320 [ 162.469282] ? cmp_uints+0xe0/0xe0 [ 162.469557] ? cmp_sdh+0x90/0x90 [ 162.469864] ? ni_find_attr+0x214/0x300 [ 162.470217] ? ni_load_mi+0x80/0x80 [ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.470931] ? ntfs_bread_run+0x190/0x190 [ 162.471307] ? indx_get_root+0xe4/0x190 [ 162.471556] ? indx_get_root+0x140/0x190 [ 162.471833] ? indx_init+0x1e0/0x1e0 [ 162.472069] ? fnd_clear+0x115/0x140 [ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100 [ 162.472731] indx_find+0x184/0x470 [ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 162.474429] ? indx_find_buffer+0x2d0/0x2d0 [ 162.474704] ? do_syscall_64+0x3b/0x90 [ 162.474962] dir_search_u+0x196/0x2f0 [ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450 [ 162.475661] ? ntfs_security_init+0x3d6/0x440 [ 162.475906] ? is_sd_valid+0x180/0x180 [ 162.476191] ntfs_extend_init+0x13f/0x2c0 [ 162.476496] ? ntfs_fix_post_read+0x130/0x130 [ 162.476861] ? iput.part.0+0x286/0x320 [ 162.477325] ntfs_fill_super+0x11e0/0x1b50 [ 162.477709] ? put_ntfs+0x1d0/0x1d0 [ 162.477970] ? vsprintf+0x20/0x20 [ 162.478258] ? set_blocksize+0x95/0x150 [ 162.478538] get_tree_bdev+0x232/0x370 [ 162.478789] ? put_ntfs+0x1d0/0x1d0 [ 162.479038] ntfs_fs_get_tree+0x15/0x20 [ 162.479374] vfs_get_tree+0x4c/0x130 [ 162.479729] path_mount+0x654/0xfe0 [ 162.480124] ? putname+0x80/0xa0 [ 162.480484] ? finish_automount+0x2e0/0x2e0 [ 162.480894] ? putname+0x80/0xa0 [ 162.481467] ? kmem_cache_free+0x1c4/0x440 [ 162.482280] ? putname+0x80/0xa0 [ 162.482714] do_mount+0xd6/0xf0 [ 162.483264] ? path_mount+0xfe0/0xfe0 [ 162.484782] ? __kasan_check_write+0x14/0x20 [ 162.485593] __x64_sys_mount+0xca/0x110 [ 162.486024] do_syscall_64+0x3b/0x90 [ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.487141] RIP: 0033:0x7f9d374e948a [ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a [ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0 [ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020 [ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0 [ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff [ 162.493644] </TASK> [ 162.493908] [ 162.494214] The buggy address belongs to the physical page: [ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc [ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000 [ 162.498928] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 162.500542] page dumped becau ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fuse: fix runtime warning on truncate_folio_batch_exceptionals() The WARN_ON_ONCE is introduced on truncate_folio_batch_exceptionals() to capture whether the filesystem has removed all DAX entries or not. And the fix has been applied on the filesystem xfs and ext4 by the commit 0e2f80afcfa6 ("fs/dax: ensure all pages are idle prior to filesystem unmount"). Apply the missed fix on filesystem fuse to fix the runtime warning: [ 2.011450] ------------[ cut here ]------------ [ 2.011873] WARNING: CPU: 0 PID: 145 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.012468] Modules linked in: [ 2.012718] CPU: 0 UID: 1000 PID: 145 Comm: weston Not tainted 6.16.0-rc2-WSL2-STABLE #2 PREEMPT(undef) [ 2.013292] RIP: 0010:truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.013704] Code: 48 63 d0 41 29 c5 48 8d 1c d5 00 00 00 00 4e 8d 6c 2a 01 49 c1 e5 03 eb 09 48 83 c3 08 49 39 dd 74 83 41 f6 44 1c 08 01 74 ef <0f> 0b 49 8b 34 1e 48 89 ef e8 10 a2 17 00 eb df 48 8b 7d 00 e8 35 [ 2.014845] RSP: 0018:ffffa47ec33f3b10 EFLAGS: 00010202 [ 2.015279] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.015884] RDX: 0000000000000000 RSI: ffffa47ec33f3ca0 RDI: ffff98aa44f3fa80 [ 2.016377] RBP: ffff98aa44f3fbf0 R08: ffffa47ec33f3ba8 R09: 0000000000000000 [ 2.016942] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa47ec33f3ca0 [ 2.017437] R13: 0000000000000008 R14: ffffa47ec33f3ba8 R15: 0000000000000000 [ 2.017972] FS: 000079ce006afa40(0000) GS:ffff98aade441000(0000) knlGS:0000000000000000 [ 2.018510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.018987] CR2: 000079ce03e74000 CR3: 000000010784f006 CR4: 0000000000372eb0 [ 2.019518] Call Trace: [ 2.019729] <TASK> [ 2.019901] truncate_inode_pages_range+0xd8/0x400 [ 2.020280] ? timerqueue_add+0x66/0xb0 [ 2.020574] ? get_nohz_timer_target+0x2a/0x140 [ 2.020904] ? timerqueue_add+0x66/0xb0 [ 2.021231] ? timerqueue_del+0x2e/0x50 [ 2.021646] ? __remove_hrtimer+0x39/0x90 [ 2.022017] ? srso_alias_untrain_ret+0x1/0x10 [ 2.022497] ? psi_group_change+0x136/0x350 [ 2.023046] ? _raw_spin_unlock+0xe/0x30 [ 2.023514] ? finish_task_switch.isra.0+0x8d/0x280 [ 2.024068] ? __schedule+0x532/0xbd0 [ 2.024551] fuse_evict_inode+0x29/0x190 [ 2.025131] evict+0x100/0x270 [ 2.025641] ? _atomic_dec_and_lock+0x39/0x50 [ 2.026316] ? __pfx_generic_delete_inode+0x10/0x10 [ 2.026843] __dentry_kill+0x71/0x180 [ 2.027335] dput+0xeb/0x1b0 [ 2.027725] __fput+0x136/0x2b0 [ 2.028054] __x64_sys_close+0x3d/0x80 [ 2.028469] do_syscall_64+0x6d/0x1b0 [ 2.028832] ? clear_bhb_loop+0x30/0x80 [ 2.029182] ? clear_bhb_loop+0x30/0x80 [ 2.029533] ? clear_bhb_loop+0x30/0x80 [ 2.029902] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.030423] RIP: 0033:0x79ce03d0d067 [ 2.030820] Code: b8 ff ff ff ff e9 3e ff ff ff 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a7 f8 ff [ 2.032354] RSP: 002b:00007ffef0498948 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 2.032939] RAX: ffffffffffffffda RBX: 00007ffef0498960 RCX: 000079ce03d0d067 [ 2.033612] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 000000000000000d [ 2.034289] RBP: 00007ffef0498a30 R08: 000000000000000d R09: 0000000000000000 [ 2.034944] R10: 00007ffef0498978 R11: 0000000000000246 R12: 0000000000000001 [ 2.035610] R13: 00007ffef0498960 R14: 000079ce03e09ce0 R15: 0000000000000003 [ 2.036301] </TASK> [ 2.036532] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using Running IDXD workloads in a container with the /dev directory mounted can trigger a call trace or even a kernel panic when the parent process of the container is terminated. This issue occurs because, under certain configurations, Docker does not properly propagate the mount replica back to the original mount point. In this case, when the user driver detaches, the WQ is destroyed but it still calls destroy_workqueue() attempting to completes all pending work. It's necessary to check wq->wq and skip the drain if it no longer exists.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix the dead loop of MPLS parse The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type '__be32 [3]' CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: rpl: Fix use-after-free in rpl_do_srh_inline(). Running lwt_dst_cache_ref_loop.sh in selftest with KASAN triggers the splat below [0]. rpl_do_srh_inline() fetches ipv6_hdr(skb) and accesses it after skb_cow_head(), which is illegal as the header could be freed then. Let's fix it by making oldhdr to a local struct instead of a pointer. [0]: [root@fedora net]# ./lwt_dst_cache_ref_loop.sh ... TEST: rpl (input) [ 57.631529] ================================================================== BUG: KASAN: slab-use-after-free in rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) Read of size 40 at addr ffff888122bf96d8 by task ping6/1543 CPU: 50 UID: 0 PID: 1543 Comm: ping6 Not tainted 6.16.0-rc5-01302-gfadd1e6231b1 #23 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) kasan_check_range (mm/kasan/generic.c:175 (discriminator 1) mm/kasan/generic.c:189 (discriminator 1)) __asan_memmove (mm/kasan/shadow.c:94 (discriminator 2)) rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282) lwtunnel_input (net/core/lwtunnel.c:459) ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1)) __netif_receive_skb_one_core (net/core/dev.c:5967) process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440) __napi_poll.constprop.0 (net/core/dev.c:7452) net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643) handle_softirqs (kernel/softirq.c:579) do_softirq (kernel/softirq.c:480 (discriminator 20)) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:407) __dev_queue_xmit (net/core/dev.c:4740) ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141) ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226) ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248) ip6_send_skb (net/ipv6/ip6_output.c:1983) rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918) __sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1)) __x64_sys_sendto (net/socket.c:2231) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f68cffb2a06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007ffefb7c53d0 EFLAGS: 00000202 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000564cd69f10a0 RCX: 00007f68cffb2a06 RDX: 0000000000000040 RSI: 0000564cd69f10a4 RDI: 0000000000000003 RBP: 00007ffefb7c53f0 R08: 0000564cd6a032ac R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000202 R12: 0000564cd69f10a4 R13: 0000000000000040 R14: 00007ffefb7c66e0 R15: 0000564cd69f10a0 </TASK> Allocated by task 1543: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345) kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249) kmalloc_reserve (net/core/skbuff.c:581 (discriminator 88)) __alloc_skb (net/core/skbuff.c:669) __ip6_append_data (net/ipv6/ip6_output.c:1672 (discriminator 1)) ip6_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices The driver only offloads neighbors that are constructed on top of net devices registered by it or their uppers (which are all Ethernet). The device supports GRE encapsulation and decapsulation of forwarded traffic, but the driver will not offload dummy neighbors constructed on top of GRE net devices as they are not uppers of its net devices: # ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1 # ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1 $ ip neigh show dev gre1 nud noarp 0.0.0.0 lladdr 0.0.0.0 NOARP (Note that the neighbor is not marked with 'offload') When the driver is reloaded and the existing configuration is replayed, the driver does not perform the same check regarding existing neighbors and offloads the previously added one: # devlink dev reload pci/0000:01:00.0 $ ip neigh show dev gre1 nud noarp 0.0.0.0 lladdr 0.0.0.0 offload NOARP If the neighbor is later deleted, the driver will ignore the notification (given the GRE net device is not its upper) and will therefore keep referencing freed memory, resulting in a use-after-free [1] when the net device is deleted: # ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1 # ip link del dev gre1 Fix by skipping neighbor replay if the net device for which the replay is performed is not our upper. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200 Read of size 8 at addr ffff888155b0e420 by task ip/2282 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 mlxsw_sp_neigh_entry_update+0x1ea/0x200 mlxsw_sp_router_rif_gone_sync+0x2a8/0x440 mlxsw_sp_rif_destroy+0x1e9/0x750 mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0 mlxsw_sp_router_netdevice_event+0x3ac/0x15e0 notifier_call_chain+0xca/0x150 call_netdevice_notifiers_info+0x7f/0x100 unregister_netdevice_many_notify+0xc8c/0x1d90 rtnl_dellink+0x34e/0xa50 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix use-after free in init error and remove paths devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshcd and therefore Scsi_host allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c remove() as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9375: Fix double free of regulator supplies Driver gets regulator supplies in probe path with devm_regulator_bulk_get(), so should not call regulator_bulk_free() in error and remove paths to avoid double free.

In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.

In the Linux kernel, the following vulnerability has been resolved: crypto: lzo - Fix compression buffer overrun Unlike the decompression code, the compression code in LZO never checked for output overruns. It instead assumes that the caller always provides enough buffer space, disregarding the buffer length provided by the caller. Add a safe compression interface that checks for the end of buffer before each write. Use the safe interface in crypto/lzo.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: free irq correctly in remove path Add fsl_edma->txirq/errirq check to avoid below warning because no errirq at i.MX9 platform. Otherwise there will be kernel dump: WARNING: CPU: 0 PID: 11 at kernel/irq/devres.c:144 devm_free_irq+0x74/0x80 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u8:0 Not tainted 6.12.0-rc7#18 Hardware name: NXP i.MX93 11X11 EVK board (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : devm_free_irq+0x74/0x80 lr : devm_free_irq+0x48/0x80 Call trace: devm_free_irq+0x74/0x80 (P) devm_free_irq+0x48/0x80 (L) fsl_edma_remove+0xc4/0xc8 platform_remove+0x28/0x44 device_remove+0x4c/0x80

In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: Fix unlocked deletion of default FDB entry When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB entry associated with the default remote (assuming one was configured) is deleted without holding the hash lock. This is wrong and will result in a warning [1] being generated by the lockdep annotation that was added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup"). Reproducer: # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0 # bridge vni del vni 10010 dev vx0 Fix by acquiring the hash lock before the deletion and releasing it afterwards. Blame the original commit that introduced the issue rather than the one that exposed it. [1] WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0 [...] RIP: 0010:vxlan_find_mac+0x17f/0x1a0 [...] Call Trace: <TASK> __vxlan_fdb_delete+0xbe/0x560 vxlan_vni_delete_group+0x2ba/0x940 vxlan_vni_del.isra.0+0x15f/0x580 vxlan_process_vni_filter+0x38b/0x7b0 vxlan_vnifilter_process+0x3bb/0x510 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem, on huge=always tmpfs, issues a warning and then hangs (interruptibly): WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9 CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2 ... copy_page_from_iter_atomic+0xa6/0x5ec generic_perform_write+0xf6/0x1b4 shmem_file_write_iter+0x54/0x67 Fix copy_page_from_iter_atomic() by limiting it in that case (include/linux/skbuff.h skb_frag_must_loop() does similar). But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too surprising, has outlived its usefulness, and should just be removed?

In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log]

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception Previously, commit ed129ec9057f ("KVM: x86: forcibly leave nested mode on vCPU reset") addressed an issue where a triple fault occurring in nested mode could lead to use-after-free scenarios. However, the commit did not handle the analogous situation for System Management Mode (SMM). This omission results in triggering a WARN when KVM forces a vCPU INIT after SHUTDOWN interception while the vCPU is in SMM. This situation was reprodused using Syzkaller by: 1) Creating a KVM VM and vCPU 2) Sending a KVM_SMI ioctl to explicitly enter SMM 3) Executing invalid instructions causing consecutive exceptions and eventually a triple fault The issue manifests as follows: WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112 kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Modules linked in: CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted 6.1.130-syzkaller-00157-g164fe5dde9b6 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Call Trace: <TASK> shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136 svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395 svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457 vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline] vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062 kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283 kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN() in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to do _something_ sane with the VMCB, since it's technically undefined, and INIT is the least awful choice given KVM's ABI. So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of SMM to avoid any weirdness (and the WARN). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. [sean: massage changelog, make it clear this isn't architectural behavior]

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix max_sge overflow in smb_extract_folioq_to_rdma() This fixes the following problem: [ 749.901015] [ T8673] run fstests cifs/001 at 2025-06-17 09:40:30 [ 750.346409] [ T9870] ================================================================== [ 750.346814] [ T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.347330] [ T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870 [ 750.347705] [ T9870] [ 750.348077] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary) [ 750.348082] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 750.348085] [ T9870] Call Trace: [ 750.348086] [ T9870] <TASK> [ 750.348088] [ T9870] dump_stack_lvl+0x76/0xa0 [ 750.348106] [ T9870] print_report+0xd1/0x640 [ 750.348116] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 750.348120] [ T9870] ? kasan_complete_mode_report_info+0x26/0x210 [ 750.348124] [ T9870] kasan_report+0xe7/0x130 [ 750.348128] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348262] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348377] [ T9870] __asan_report_store8_noabort+0x17/0x30 [ 750.348381] [ T9870] smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348496] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs] [ 750.348625] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs] [ 750.348741] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348749] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348870] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348990] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348995] [ T9870] smbd_send+0x58c/0x9c0 [cifs] [ 750.349117] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs] [ 750.349231] [ T9870] ? unwind_get_return_address+0x65/0xb0 [ 750.349235] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 750.349242] [ T9870] ? arch_stack_walk+0xa7/0x100 [ 750.349250] [ T9870] ? stack_trace_save+0x92/0xd0 [ 750.349254] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs] [ 750.349374] [ T9870] ? kernel_text_address+0x173/0x190 [ 750.349379] [ T9870] ? kasan_save_stack+0x39/0x70 [ 750.349382] [ T9870] ? kasan_save_track+0x18/0x70 [ 750.349385] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0 [ 750.349389] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs] [ 750.349508] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs] [ 750.349626] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs] [ 750.349746] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.349867] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.349900] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs] [ 750.349929] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.349958] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs] [ 750.349987] [ T9870] ? do_writepages+0x21f/0x590 [ 750.349993] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140 [ 750.349997] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.350002] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs] [ 750.350131] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] [ 750.350255] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.350261] [ T9870] ? kasan_save_alloc_info+0x37/0x60 [ 750.350268] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350271] [ T9870] ? _raw_spin_lock+0x81/0xf0 [ 750.350275] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350278] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs] [ 750.350398] [ T9870] cifs_call_async+0x477/0xb00 [cifs] [ 750.350518] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs] [ 750.350636] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs] [ 750.350756] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350760] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350763] [ T98 ---truncated---