In the Linux kernel, the following vulnerability has been resolved: net: phy: Remove LED entry from LEDs list on unregister Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering") correctly fixed a problem with using devm_ but missed removing the LED entry from the LEDs list. This cause kernel panic on specific scenario where the port for the PHY is torn down and up and the kmod for the PHY is removed. On setting the port down the first time, the assosiacted LEDs are correctly unregistered. The associated kmod for the PHY is now removed. The kmod is now added again and the port is now put up, the associated LED are registered again. On putting the port down again for the second time after these step, the LED list now have 4 elements. With the first 2 already unregistered previously and the 2 new one registered again. This cause a kernel panic as the first 2 element should have been removed. Fix this by correctly removing the element when LED is unregistered.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream before comparing them [WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check phantom_stream before it is used dcn32_enable_phantom_stream can return null, so returned value must be checked before used. This fixes 1 NULL_RETURNS issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix ERR_PTR dereference in uvc_v4l2.c Fix potential dereferencing of ERR_PTR() in find_format_by_pix() and uvc_v4l2_enum_format(). Fix the following smatch errors: drivers/usb/gadget/function/uvc_v4l2.c:124 find_format_by_pix() error: 'fmtdesc' dereferencing possible ERR_PTR() drivers/usb/gadget/function/uvc_v4l2.c:392 uvc_v4l2_enum_format() error: 'fmtdesc' dereferencing possible ERR_PTR() Also, fix similar issue in uvc_v4l2_try_format() for potential dereferencing of ERR_PTR().

In the Linux kernel, the following vulnerability has been resolved: r8169: add tally counter fields added with RTL8125 RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: stm32: check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review.

A flaw was found in the Framebuffer Console (fbcon) in the Linux Kernel. When providing font->width and font->height greater than 32 to fbcon_set_font, since there are no checks in place, a shift-out-of-bounds occurs leading to undefined behavior and possible denial of service.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags [WHAT & HOW] "dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it cannot be a null pointer. Let's pass a valid pointer to avoid null dereference. This fixes 2 FORWARD_NULL issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: uprobes: fix kernel info leak via "[uprobes]" vma xol_add_vma() maps the uninitialized page allocated by __create_xol_area() into userspace. On some architectures (x86) this memory is readable even without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ, although this doesn't really matter, debugger can read this memory anyway.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn20_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn20_set_output_transfer_func function. Previously, set_output_gamma was being checked for null at line 1030, but then it was being dereferenced without any null check at line 1048. This could potentially lead to a null pointer dereference error if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma at line 1048.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix RX buf alloc_size alignment and atomic op panic The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0

An issue was discovered in the Linux kernel before 5.14.15. There is an array-index-out-of-bounds flaw in the detach_capi_ctr function in drivers/isdn/capi/kcapi.c.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before try to access it [why & how] Change the order of the pipe_ctx->plane_state check to ensure that plane_state is not null before accessing it.

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

A vulnerability was found in the Linux kernel, where accessing a deallocated instance in printer_ioctl() printer_ioctl() tries to access of a printer_dev instance. However, use-after-free arises because it had been freed by gprinter_free().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit() The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32 values that come from the user via the submit_lookup_cmds() function. This addition could lead to an integer wrapping bug so use size_add() to prevent that. Patchwork: https://patchwork.freedesktop.org/patch/624696/

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream_status before it is used [WHAT & HOW] dc_state_get_stream_status can return null, and therefore null must be checked before stream_status is used. This fixes 1 NULL_RETURNS issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Assign msm_gpu->pdev earlier to avoid nullptrs There are some cases, such as the one uncovered by Commit 46d4efcccc68 ("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails") where msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); is called on gpu->pdev == NULL, as the GPU device has not been fully initialized yet. Turns out that there's more than just the aforementioned path that causes this to happen (e.g. the case when there's speedbin data in the catalog, but opp-supported-hw is missing in DT). Assigning msm_gpu->pdev earlier seems like the least painful solution to this, therefore do so. Patchwork: https://patchwork.freedesktop.org/patch/602742/

In the Linux kernel, the following vulnerability has been resolved: btrfs: wait for fixup workers before stopping cleaner kthread during umount During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_h ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc() In mlx5e_tir_builder_alloc() kvzalloc() may return NULL which is dereferenced on the next line in a reference to the modify field. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume In case there is any sort of clock controller attached to this I2C bus controller, for example Versaclock or even an AIC32x4 I2C codec, then an I2C transfer triggered from the clock controller clk_ops .prepare callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex. This is because the clock controller first grabs the prepare_lock mutex and then performs the prepare operation, including its I2C access. The I2C access resumes this I2C bus controller via .runtime_resume callback, which calls clk_prepare_enable(), which attempts to grab the prepare_lock mutex again and deadlocks. Since the clock are already prepared since probe() and unprepared in remove(), use simple clk_enable()/clk_disable() calls to enable and disable the clock on runtime suspend and resume, to avoid hitting the prepare_lock mutex.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn32_acquire_idle_pipe_for_head_pipe_in_layer This commit addresses a potential null pointer dereference issue in the `dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize get_bytes_per_element's default to 1 Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prevent nf_skb_duplicated corruption syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write per-cpu variable nf_skb_duplicated in an unsafe way [1]. Disabling preemption as hinted by the splat is not enough, we have to disable soft interrupts as well. [1] BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316 caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622fccb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_preemption_disabled+0x10e/0x120 lib/smp_processor_id.c:49 nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 nft_dup_ipv4_eval+0x1db/0x300 net/ipv4/netfilter/nft_dup_ipv4.c:30 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x202/0x320 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook+0x2c4/0x450 include/linux/netfilter.h:269 NF_HOOK_COND include/linux/netfilter.h:302 [inline] ip_output+0x185/0x230 net/ipv4/ip_output.c:433 ip_local_out net/ipv4/ip_output.c:129 [inline] ip_send_skb+0x74/0x100 net/ipv4/ip_output.c:1495 udp_send_skb+0xacf/0x1650 net/ipv4/udp.c:981 udp_sendmsg+0x1c21/0x2a60 net/ipv4/udp.c:1269 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4ce4f7def9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4ce5d4a038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f4ce5135f80 RCX: 00007f4ce4f7def9 RDX: 0000000000000001 RSI: 0000000020005d40 RDI: 0000000000000006 RBP: 00007f4ce4ff0b76 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f4ce5135f80 R15: 00007ffd4cbc6d68 </TASK>

In the Linux kernel, the following vulnerability has been resolved: efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic.

In the Linux kernel, the following vulnerability has been resolved: net: test for not too small csum_start in virtio_net_hdr_to_skb() syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value. We can at least make sure the transport header is after the end of the network header (with a estimated minimal size). [1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 ne ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Input: adp5589-keys - fix NULL pointer dereference We register a devm action to call adp5589_clear_config() and then pass the i2c client as argument so that we can call i2c_get_clientdata() in order to get our device object. However, i2c_set_clientdata() is only being set at the end of the probe function which means that we'll get a NULL pointer dereference in case the probe function fails early.

In the Linux kernel, the following vulnerability has been resolved: scsi: wd33c93: Don't use stale scsi_pointer value A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data") which results in an oops in wd33c93_intr(). That commit added the scsi_pointer variable and initialized it from hostdata->connected. However, during selection, hostdata->connected is not yet valid. Fix this by getting the current scsi_pointer from hostdata->selecting.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: Avoid a bad reference count on CPU node In the parse_perf_domain function, if the call to of_parse_phandle_with_args returns an error, then the reference to the CPU device node that was acquired at the start of the function would not be properly decremented. Address this by declaring the variable with the __free(device_node) cleanup attribute.

In the Linux kernel, the following vulnerability has been resolved: jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail() to recover some journal space. But if an error occurs while executing jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free space right away, we try other branches, and if j_committing_transaction is NULL (i.e., the tid is 0), we will get the following complain: ============================================ JBD2: I/O error when updating journal superblock for sdd-8. __jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available __jbd2_log_wait_for_space: no way to get more journal space in sdd-8 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0 Modules linked in: CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1 RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0 Call Trace: <TASK> add_transaction_credits+0x5d1/0x5e0 start_this_handle+0x1ef/0x6a0 jbd2__journal_start+0x18b/0x340 ext4_dirty_inode+0x5d/0xb0 __mark_inode_dirty+0xe4/0x5d0 generic_update_time+0x60/0x70 [...] ============================================ So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to clean up at the moment, continue to try to reclaim free space in other ways. Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt when updating journal superblock fails") to make jbd2_cleanup_journal_tail return the correct error code.

In the Linux kernel, the following vulnerability has been resolved: io_uring: check if we need to reschedule during overflow flush In terms of normal application usage, this list will always be empty. And if an application does overflow a bit, it'll have a few entries. However, nothing obviously prevents syzbot from running a test case that generates a ton of overflow entries, and then flushing them can take quite a while. Check for needing to reschedule while flushing, and drop our locks and do so if necessary. There's no state to maintain here as overflows always prune from head-of-list, hence it's fine to drop and reacquire the locks at the end of the loop.

In the Linux kernel, the following vulnerability has been resolved: sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: <TASK> __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before dereferencing se [WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix access to uninitialised lock in fc replay path The following kernel trace can be triggered with fstest generic/629 when executed against a filesystem with fast-commit feature enabled: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x66/0x90 register_lock_class+0x759/0x7d0 __lock_acquire+0x85/0x2630 ? __find_get_block+0xb4/0x380 lock_acquire+0xd1/0x2d0 ? __ext4_journal_get_write_access+0xd5/0x160 _raw_spin_lock+0x33/0x40 ? __ext4_journal_get_write_access+0xd5/0x160 __ext4_journal_get_write_access+0xd5/0x160 ext4_reserve_inode_write+0x61/0xb0 __ext4_mark_inode_dirty+0x79/0x270 ? ext4_ext_replay_set_iblocks+0x2f8/0x450 ext4_ext_replay_set_iblocks+0x330/0x450 ext4_fc_replay+0x14c8/0x1540 ? jread+0x88/0x2e0 ? rcu_is_watching+0x11/0x40 do_one_pass+0x447/0xd00 jbd2_journal_recover+0x139/0x1b0 jbd2_journal_load+0x96/0x390 ext4_load_and_init_journal+0x253/0xd40 ext4_fill_super+0x2cc6/0x3180 ... In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in function ext4_check_bdev_write_error(). Unfortunately, at this point this spinlock has not been initialized yet. Moving it's initialization to an earlier point in __ext4_fill_super() fixes this splat.

In the Linux kernel, the following vulnerability has been resolved: ext4: update orig_path in ext4_find_extent() In ext4_find_extent(), if the path is not big enough, we free it and set *orig_path to NULL. But after reallocating and successfully initializing the path, we don't update *orig_path, in which case the caller gets a valid path but a NULL ppath, and this may cause a NULL pointer dereference or a path memory leak. For example: ext4_split_extent path = *ppath = 2000 ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path = 2000); *orig_path = path = NULL; path = kcalloc() = 3000 ext4_split_extent_at(*ppath = NULL) path = *ppath; ex = path[depth].p_ext; // NULL pointer dereference! ================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000010 CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847 RIP: 0010:ext4_split_extent_at+0x6d/0x560 Call Trace: <TASK> ext4_split_extent.isra.0+0xcb/0x1b0 ext4_ext_convert_to_initialized+0x168/0x6c0 ext4_ext_handle_unwritten_extents+0x325/0x4d0 ext4_ext_map_blocks+0x520/0xdb0 ext4_map_blocks+0x2b0/0x690 ext4_iomap_begin+0x20e/0x2c0 [...] ================================================================== Therefore, *orig_path is updated when the extent lookup succeeds, so that the caller can safely use path or *ppath.

A flaw was found in the Linux kernel’s implementation of reading the SVC RDMA counters. Reading the counter sysctl panics the system. This flaw allows a local attacker with local access to cause a denial of service while the system reboots. The issue is specific to CentOS/RHEL.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package() ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0 ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause NULL pointer dereference later. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Free tzp copy along with the thermal zone The object pointed to by tz->tzp may still be accessed after being freed in thermal_zone_device_unregister(), so move the freeing of it to the point after the removal completion has been completed at which it cannot be accessed any more.

In the Linux kernel, the following vulnerability has been resolved: drm: omapdrm: Add missing check for alloc_ordered_workqueue As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue.

In the Linux kernel, the following vulnerability has been resolved: net: gso: fix tcp fraglist segmentation after pull from frag_list Detect tcp gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For TCP, this causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at tcp_hdr(seg->next). Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Approach and description based on a patch by Willem de Bruijn.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: set the cipher for secured NDP ranging The cipher pointer is not set, but is derefereced trying to set its content, which leads to a NULL pointer dereference. Fix it by pointing to the cipher parameter before dereferencing.

In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Move flush_work initialization out of if block After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a work queue"), it can happen that a work item is sent to an uninitialized work queue. This may has the effect that the item being queued is never actually queued, and any further actions depending on it will not proceed. The following warning is observed while the fnic driver is loaded: kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410 kernel: <IRQ> kernel: queue_work_on+0x3a/0x50 kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24] kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24] kernel: __handle_irq_event_percpu+0x36/0x1a0 kernel: handle_irq_event_percpu+0x30/0x70 kernel: handle_irq_event+0x34/0x60 kernel: handle_edge_irq+0x7e/0x1a0 kernel: __common_interrupt+0x3b/0xb0 kernel: common_interrupt+0x58/0xa0 kernel: </IRQ> It has been observed that this may break the rediscovery of Fibre Channel devices after a temporary fabric failure. This patch fixes it by moving the work queue initialization out of an if block in fnic_probe().

In the Linux kernel, the following vulnerability has been resolved: device-dax: correct pgoff align in dax_set_mapping() pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise, vmf->address not aligned to fault_size will be aligned to the next alignment, that can result in memory failure getting the wrong address. It's a subtle situation that only can be observed in page_mapped_in_vma() after the page is page fault handled by dev_dax_huge_fault. Generally, there is little chance to perform page_mapped_in_vma in dev-dax's page unless in specific error injection to the dax device to trigger an MCE - memory-failure. In that case, page_mapped_in_vma() will be triggered to determine which task is accessing the failure address and kill that task in the end. We used self-developed dax device (which is 2M aligned mapping) , to perform error injection to random address. It turned out that error injected to non-2M-aligned address was causing endless MCE until panic. Because page_mapped_in_vma() kept resulting wrong address and the task accessing the failure address was never killed properly: [ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.049006] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.448042] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.792026] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.162502] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.461116] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.764730] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.042128] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.464293] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.818090] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3787.085297] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page: Recovered It took us several weeks to pinpoint this problem,  but we eventually used bpftrace to trace the page fault and mce address and successfully identified the issue. Joao added: ; Likely we never reproduce in production because we always pin : device-dax regions in the region align they provide (Qemu does : similarly with prealloc in hugetlb/file backed memory). I think this : bug requires that we touch *unpinned* device-dax regions unaligned to : the device-dax selected alignment (page size i.e. 4K/2M/1G)

In the Linux kernel, the following vulnerability has been resolved: net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg When receiving proposal msg in server, the field iparea_offset and the field ipv6_prefixes_cnt in proposal msg are from the remote client and can not be fully trusted. Especially the field iparea_offset, once exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks iparea_offset and ipv6_prefixes_cnt before using them.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ar0521: Use cansleep version of gpiod_set_value() If we use GPIO reset from I2C port expander, we must use *_cansleep() variant of GPIO functions. This was not done in ar0521_power_on()/ar0521_power_off() functions. Let's fix that. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c Modules linked in: CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : gpiod_set_value+0x74/0x7c lr : ar0521_power_on+0xcc/0x290 sp : ffffff8001d7ab70 x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000 x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088 x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088 x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80 x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000 x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930 x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0 x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780 x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: gpiod_set_value+0x74/0x7c ar0521_power_on+0xcc/0x290 ...

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TC ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/

In the Linux kernel, the following vulnerability has been resolved: ppp: do not assume bh is held in ppp_channel_bridge_input() Networking receive path is usually handled from BH handler. However, some protocols need to acquire the socket lock, and packets might be stored in the socket backlog is the socket was owned by a user process. In this case, release_sock(), __release_sock(), and sk_backlog_rcv() might call the sk->sk_backlog_rcv() handler in process context. sybot caught ppp was not considering this case in ppp_channel_bridge_input() : WARNING: inconsistent lock state 6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x1a8/0x3d8 net/core/sock.c:3004 release_sock+0x68/0x1b8 net/core/sock.c:3558 pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x374/0x4f4 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 irq event stamp: 282914 hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline] hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194 hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162 softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582 softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&pch->downl); <Interrupt> lock(&pch->downl); *** DEADLOCK *** 1 lock held by ksoftirqd/1/24: #0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325 stack backtrace: CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326 __dump_sta ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn401_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn401_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma.